linux/drivers/char/ipmi/ipmi_si_hardcode.c
Corey Minyard e17c657100 ipmi_si: Consolidate scanning the platform bus
The same basic code was in two places.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2019-02-22 07:12:41 -06:00

174 lines
5.4 KiB
C

// SPDX-License-Identifier: GPL-2.0+
#define pr_fmt(fmt) "ipmi_hardcode: " fmt
#include <linux/moduleparam.h>
#include <linux/platform_device.h>
#include "ipmi_si.h"
#include "ipmi_plat_data.h"
/*
* There can be 4 IO ports passed in (with or without IRQs), 4 addresses,
* a default IO port, and 1 ACPI/SPMI address. That sets SI_MAX_DRIVERS.
*/
#define SI_MAX_PARMS 4
#define MAX_SI_TYPE_STR 30
static char si_type_str[MAX_SI_TYPE_STR] __initdata;
static unsigned long addrs[SI_MAX_PARMS];
static unsigned int num_addrs;
static unsigned int ports[SI_MAX_PARMS];
static unsigned int num_ports;
static int irqs[SI_MAX_PARMS] __initdata;
static unsigned int num_irqs __initdata;
static int regspacings[SI_MAX_PARMS] __initdata;
static unsigned int num_regspacings __initdata;
static int regsizes[SI_MAX_PARMS] __initdata;
static unsigned int num_regsizes __initdata;
static int regshifts[SI_MAX_PARMS] __initdata;
static unsigned int num_regshifts __initdata;
static int slave_addrs[SI_MAX_PARMS] __initdata;
static unsigned int num_slave_addrs __initdata;
module_param_string(type, si_type_str, MAX_SI_TYPE_STR, 0);
MODULE_PARM_DESC(type, "Defines the type of each interface, each"
" interface separated by commas. The types are 'kcs',"
" 'smic', and 'bt'. For example si_type=kcs,bt will set"
" the first interface to kcs and the second to bt");
module_param_hw_array(addrs, ulong, iomem, &num_addrs, 0);
MODULE_PARM_DESC(addrs, "Sets the memory address of each interface, the"
" addresses separated by commas. Only use if an interface"
" is in memory. Otherwise, set it to zero or leave"
" it blank.");
module_param_hw_array(ports, uint, ioport, &num_ports, 0);
MODULE_PARM_DESC(ports, "Sets the port address of each interface, the"
" addresses separated by commas. Only use if an interface"
" is a port. Otherwise, set it to zero or leave"
" it blank.");
module_param_hw_array(irqs, int, irq, &num_irqs, 0);
MODULE_PARM_DESC(irqs, "Sets the interrupt of each interface, the"
" addresses separated by commas. Only use if an interface"
" has an interrupt. Otherwise, set it to zero or leave"
" it blank.");
module_param_hw_array(regspacings, int, other, &num_regspacings, 0);
MODULE_PARM_DESC(regspacings, "The number of bytes between the start address"
" and each successive register used by the interface. For"
" instance, if the start address is 0xca2 and the spacing"
" is 2, then the second address is at 0xca4. Defaults"
" to 1.");
module_param_hw_array(regsizes, int, other, &num_regsizes, 0);
MODULE_PARM_DESC(regsizes, "The size of the specific IPMI register in bytes."
" This should generally be 1, 2, 4, or 8 for an 8-bit,"
" 16-bit, 32-bit, or 64-bit register. Use this if you"
" the 8-bit IPMI register has to be read from a larger"
" register.");
module_param_hw_array(regshifts, int, other, &num_regshifts, 0);
MODULE_PARM_DESC(regshifts, "The amount to shift the data read from the."
" IPMI register, in bits. For instance, if the data"
" is read from a 32-bit word and the IPMI data is in"
" bit 8-15, then the shift would be 8");
module_param_hw_array(slave_addrs, int, other, &num_slave_addrs, 0);
MODULE_PARM_DESC(slave_addrs, "Set the default IPMB slave address for"
" the controller. Normally this is 0x20, but can be"
" overridden by this parm. This is an array indexed"
" by interface number.");
static void __init ipmi_hardcode_init_one(const char *si_type_str,
unsigned int i,
unsigned long addr,
enum ipmi_addr_space addr_space)
{
struct ipmi_plat_data p;
memset(&p, 0, sizeof(p));
if (!si_type_str || !*si_type_str || strcmp(si_type_str, "kcs") == 0) {
p.type = SI_KCS;
} else if (strcmp(si_type_str, "smic") == 0) {
p.type = SI_SMIC;
} else if (strcmp(si_type_str, "bt") == 0) {
p.type = SI_BT;
} else if (strcmp(si_type_str, "invalid") == 0) {
/*
* Allow a firmware-specified interface to be
* disabled.
*/
p.type = SI_TYPE_INVALID;
} else {
pr_warn("Interface type specified for interface %d, was invalid: %s\n",
i, si_type_str);
return;
}
p.regsize = regsizes[i];
p.slave_addr = slave_addrs[i];
p.addr_source = SI_HARDCODED;
p.regshift = regshifts[i];
p.regsize = regsizes[i];
p.addr = addr;
p.space = addr_space;
ipmi_platform_add("hardcode-ipmi-si", i, &p);
}
void __init ipmi_hardcode_init(void)
{
unsigned int i;
char *str;
char *si_type[SI_MAX_PARMS];
/* Parse out the si_type string into its components. */
str = si_type_str;
if (*str != '\0') {
for (i = 0; (i < SI_MAX_PARMS) && (*str != '\0'); i++) {
si_type[i] = str;
str = strchr(str, ',');
if (str) {
*str = '\0';
str++;
} else {
break;
}
}
}
for (i = 0; i < SI_MAX_PARMS; i++) {
if (i < num_ports && ports[i])
ipmi_hardcode_init_one(si_type[i], i, ports[i],
IPMI_IO_ADDR_SPACE);
if (i < num_addrs && addrs[i])
ipmi_hardcode_init_one(si_type[i], i, addrs[i],
IPMI_MEM_ADDR_SPACE);
}
}
void ipmi_si_hardcode_exit(void)
{
ipmi_remove_platform_device_by_name("hardcode-ipmi-si");
}
/*
* Returns true of the given address exists as a hardcoded address,
* false if not.
*/
int ipmi_si_hardcode_match(int addr_space, unsigned long addr)
{
unsigned int i;
if (addr_space == IPMI_IO_ADDR_SPACE) {
for (i = 0; i < num_ports; i++) {
if (ports[i] == addr)
return 1;
}
} else {
for (i = 0; i < num_addrs; i++) {
if (addrs[i] == addr)
return 1;
}
}
return 0;
}