linux/drivers/gpu/drm/gma500/oaktrail_lvds.c
Daniel Vetter c46145aee1 drm/gma500: add locking to fixed panel edid probing
With the recent addition of locking checks in

commit 62ff94a549
Author:     Daniel Vetter <daniel.vetter@ffwll.ch>
AuthorDate: Thu Jan 23 22:18:47 2014 +0100

    drm/crtc-helper: remove LOCKING from kerneldoc

drm_add_edid_modes started to WARN about the mode_config.mutex not
being held in the lvds and dp initialization code.

Now since this is init code locking is fairly redudant if it wouldn't
be for the drm core registering sysfs files a bit early. And the
locking WARNINGs nicely enforce that indeed all access to the mode
lists are properly protected. And a full audit shows that only i915
and gma500 touch the modes lists at init time.

Hence I've opted to wrap up this entire mode detection sequence for
fixed panels with the mode_config mutex for both lvds and edp outputs.

Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-24 07:54:30 +10:00

426 lines
13 KiB
C

/*
* Copyright © 2006-2009 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*
* Authors:
* Eric Anholt <eric@anholt.net>
* Dave Airlie <airlied@linux.ie>
* Jesse Barnes <jesse.barnes@intel.com>
*/
#include <linux/i2c.h>
#include <drm/drmP.h>
#include <asm/intel-mid.h>
#include "intel_bios.h"
#include "psb_drv.h"
#include "psb_intel_drv.h"
#include "psb_intel_reg.h"
#include "power.h"
#include <linux/pm_runtime.h>
/* The max/min PWM frequency in BPCR[31:17] - */
/* The smallest number is 1 (not 0) that can fit in the
* 15-bit field of the and then*/
/* shifts to the left by one bit to get the actual 16-bit
* value that the 15-bits correspond to.*/
#define MRST_BLC_MAX_PWM_REG_FREQ 0xFFFF
#define BRIGHTNESS_MAX_LEVEL 100
/**
* Sets the power state for the panel.
*/
static void oaktrail_lvds_set_power(struct drm_device *dev,
struct gma_encoder *gma_encoder,
bool on)
{
u32 pp_status;
struct drm_psb_private *dev_priv = dev->dev_private;
if (!gma_power_begin(dev, true))
return;
if (on) {
REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) |
POWER_TARGET_ON);
do {
pp_status = REG_READ(PP_STATUS);
} while ((pp_status & (PP_ON | PP_READY)) == PP_READY);
dev_priv->is_lvds_on = true;
if (dev_priv->ops->lvds_bl_power)
dev_priv->ops->lvds_bl_power(dev, true);
} else {
if (dev_priv->ops->lvds_bl_power)
dev_priv->ops->lvds_bl_power(dev, false);
REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) &
~POWER_TARGET_ON);
do {
pp_status = REG_READ(PP_STATUS);
} while (pp_status & PP_ON);
dev_priv->is_lvds_on = false;
pm_request_idle(&dev->pdev->dev);
}
gma_power_end(dev);
}
static void oaktrail_lvds_dpms(struct drm_encoder *encoder, int mode)
{
struct drm_device *dev = encoder->dev;
struct gma_encoder *gma_encoder = to_gma_encoder(encoder);
if (mode == DRM_MODE_DPMS_ON)
oaktrail_lvds_set_power(dev, gma_encoder, true);
else
oaktrail_lvds_set_power(dev, gma_encoder, false);
/* XXX: We never power down the LVDS pairs. */
}
static void oaktrail_lvds_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
struct drm_device *dev = encoder->dev;
struct drm_psb_private *dev_priv = dev->dev_private;
struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
struct drm_mode_config *mode_config = &dev->mode_config;
struct drm_connector *connector = NULL;
struct drm_crtc *crtc = encoder->crtc;
u32 lvds_port;
uint64_t v = DRM_MODE_SCALE_FULLSCREEN;
if (!gma_power_begin(dev, true))
return;
/*
* The LVDS pin pair will already have been turned on in the
* psb_intel_crtc_mode_set since it has a large impact on the DPLL
* settings.
*/
lvds_port = (REG_READ(LVDS) &
(~LVDS_PIPEB_SELECT)) |
LVDS_PORT_EN |
LVDS_BORDER_EN;
/* If the firmware says dither on Moorestown, or the BIOS does
on Oaktrail then enable dithering */
if (mode_dev->panel_wants_dither || dev_priv->lvds_dither)
lvds_port |= MRST_PANEL_8TO6_DITHER_ENABLE;
REG_WRITE(LVDS, lvds_port);
/* Find the connector we're trying to set up */
list_for_each_entry(connector, &mode_config->connector_list, head) {
if (!connector->encoder || connector->encoder->crtc != crtc)
continue;
}
if (!connector) {
DRM_ERROR("Couldn't find connector when setting mode");
return;
}
drm_object_property_get_value(
&connector->base,
dev->mode_config.scaling_mode_property,
&v);
if (v == DRM_MODE_SCALE_NO_SCALE)
REG_WRITE(PFIT_CONTROL, 0);
else if (v == DRM_MODE_SCALE_ASPECT) {
if ((mode->vdisplay != adjusted_mode->crtc_vdisplay) ||
(mode->hdisplay != adjusted_mode->crtc_hdisplay)) {
if ((adjusted_mode->crtc_hdisplay * mode->vdisplay) ==
(mode->hdisplay * adjusted_mode->crtc_vdisplay))
REG_WRITE(PFIT_CONTROL, PFIT_ENABLE);
else if ((adjusted_mode->crtc_hdisplay *
mode->vdisplay) > (mode->hdisplay *
adjusted_mode->crtc_vdisplay))
REG_WRITE(PFIT_CONTROL, PFIT_ENABLE |
PFIT_SCALING_MODE_PILLARBOX);
else
REG_WRITE(PFIT_CONTROL, PFIT_ENABLE |
PFIT_SCALING_MODE_LETTERBOX);
} else
REG_WRITE(PFIT_CONTROL, PFIT_ENABLE);
} else /*(v == DRM_MODE_SCALE_FULLSCREEN)*/
REG_WRITE(PFIT_CONTROL, PFIT_ENABLE);
gma_power_end(dev);
}
static void oaktrail_lvds_prepare(struct drm_encoder *encoder)
{
struct drm_device *dev = encoder->dev;
struct drm_psb_private *dev_priv = dev->dev_private;
struct gma_encoder *gma_encoder = to_gma_encoder(encoder);
struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
if (!gma_power_begin(dev, true))
return;
mode_dev->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL);
mode_dev->backlight_duty_cycle = (mode_dev->saveBLC_PWM_CTL &
BACKLIGHT_DUTY_CYCLE_MASK);
oaktrail_lvds_set_power(dev, gma_encoder, false);
gma_power_end(dev);
}
static u32 oaktrail_lvds_get_max_backlight(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
u32 ret;
if (gma_power_begin(dev, false)) {
ret = ((REG_READ(BLC_PWM_CTL) &
BACKLIGHT_MODULATION_FREQ_MASK) >>
BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
gma_power_end(dev);
} else
ret = ((dev_priv->regs.saveBLC_PWM_CTL &
BACKLIGHT_MODULATION_FREQ_MASK) >>
BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
return ret;
}
static void oaktrail_lvds_commit(struct drm_encoder *encoder)
{
struct drm_device *dev = encoder->dev;
struct drm_psb_private *dev_priv = dev->dev_private;
struct gma_encoder *gma_encoder = to_gma_encoder(encoder);
struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
if (mode_dev->backlight_duty_cycle == 0)
mode_dev->backlight_duty_cycle =
oaktrail_lvds_get_max_backlight(dev);
oaktrail_lvds_set_power(dev, gma_encoder, true);
}
static const struct drm_encoder_helper_funcs oaktrail_lvds_helper_funcs = {
.dpms = oaktrail_lvds_dpms,
.mode_fixup = psb_intel_lvds_mode_fixup,
.prepare = oaktrail_lvds_prepare,
.mode_set = oaktrail_lvds_mode_set,
.commit = oaktrail_lvds_commit,
};
/* Returns the panel fixed mode from configuration. */
static void oaktrail_lvds_get_configuration_mode(struct drm_device *dev,
struct psb_intel_mode_device *mode_dev)
{
struct drm_display_mode *mode = NULL;
struct drm_psb_private *dev_priv = dev->dev_private;
struct oaktrail_timing_info *ti = &dev_priv->gct_data.DTD;
mode_dev->panel_fixed_mode = NULL;
/* Use the firmware provided data on Moorestown */
if (dev_priv->has_gct) {
mode = kzalloc(sizeof(*mode), GFP_KERNEL);
if (!mode)
return;
mode->hdisplay = (ti->hactive_hi << 8) | ti->hactive_lo;
mode->vdisplay = (ti->vactive_hi << 8) | ti->vactive_lo;
mode->hsync_start = mode->hdisplay + \
((ti->hsync_offset_hi << 8) | \
ti->hsync_offset_lo);
mode->hsync_end = mode->hsync_start + \
((ti->hsync_pulse_width_hi << 8) | \
ti->hsync_pulse_width_lo);
mode->htotal = mode->hdisplay + ((ti->hblank_hi << 8) | \
ti->hblank_lo);
mode->vsync_start = \
mode->vdisplay + ((ti->vsync_offset_hi << 4) | \
ti->vsync_offset_lo);
mode->vsync_end = \
mode->vsync_start + ((ti->vsync_pulse_width_hi << 4) | \
ti->vsync_pulse_width_lo);
mode->vtotal = mode->vdisplay + \
((ti->vblank_hi << 8) | ti->vblank_lo);
mode->clock = ti->pixel_clock * 10;
#if 0
printk(KERN_INFO "hdisplay is %d\n", mode->hdisplay);
printk(KERN_INFO "vdisplay is %d\n", mode->vdisplay);
printk(KERN_INFO "HSS is %d\n", mode->hsync_start);
printk(KERN_INFO "HSE is %d\n", mode->hsync_end);
printk(KERN_INFO "htotal is %d\n", mode->htotal);
printk(KERN_INFO "VSS is %d\n", mode->vsync_start);
printk(KERN_INFO "VSE is %d\n", mode->vsync_end);
printk(KERN_INFO "vtotal is %d\n", mode->vtotal);
printk(KERN_INFO "clock is %d\n", mode->clock);
#endif
mode_dev->panel_fixed_mode = mode;
}
/* Use the BIOS VBT mode if available */
if (mode_dev->panel_fixed_mode == NULL && mode_dev->vbt_mode)
mode_dev->panel_fixed_mode = drm_mode_duplicate(dev,
mode_dev->vbt_mode);
/* Then try the LVDS VBT mode */
if (mode_dev->panel_fixed_mode == NULL)
if (dev_priv->lfp_lvds_vbt_mode)
mode_dev->panel_fixed_mode =
drm_mode_duplicate(dev,
dev_priv->lfp_lvds_vbt_mode);
/* If we still got no mode then bail */
if (mode_dev->panel_fixed_mode == NULL)
return;
drm_mode_set_name(mode_dev->panel_fixed_mode);
drm_mode_set_crtcinfo(mode_dev->panel_fixed_mode, 0);
}
/**
* oaktrail_lvds_init - setup LVDS connectors on this device
* @dev: drm device
*
* Create the connector, register the LVDS DDC bus, and try to figure out what
* modes we can display on the LVDS panel (if present).
*/
void oaktrail_lvds_init(struct drm_device *dev,
struct psb_intel_mode_device *mode_dev)
{
struct gma_encoder *gma_encoder;
struct gma_connector *gma_connector;
struct drm_connector *connector;
struct drm_encoder *encoder;
struct drm_psb_private *dev_priv = dev->dev_private;
struct edid *edid;
struct i2c_adapter *i2c_adap;
struct drm_display_mode *scan; /* *modes, *bios_mode; */
gma_encoder = kzalloc(sizeof(struct gma_encoder), GFP_KERNEL);
if (!gma_encoder)
return;
gma_connector = kzalloc(sizeof(struct gma_connector), GFP_KERNEL);
if (!gma_connector)
goto failed_connector;
connector = &gma_connector->base;
encoder = &gma_encoder->base;
dev_priv->is_lvds_on = true;
drm_connector_init(dev, connector,
&psb_intel_lvds_connector_funcs,
DRM_MODE_CONNECTOR_LVDS);
drm_encoder_init(dev, encoder, &psb_intel_lvds_enc_funcs,
DRM_MODE_ENCODER_LVDS);
gma_connector_attach_encoder(gma_connector, gma_encoder);
gma_encoder->type = INTEL_OUTPUT_LVDS;
drm_encoder_helper_add(encoder, &oaktrail_lvds_helper_funcs);
drm_connector_helper_add(connector,
&psb_intel_lvds_connector_helper_funcs);
connector->display_info.subpixel_order = SubPixelHorizontalRGB;
connector->interlace_allowed = false;
connector->doublescan_allowed = false;
drm_object_attach_property(&connector->base,
dev->mode_config.scaling_mode_property,
DRM_MODE_SCALE_FULLSCREEN);
drm_object_attach_property(&connector->base,
dev_priv->backlight_property,
BRIGHTNESS_MAX_LEVEL);
mode_dev->panel_wants_dither = false;
if (dev_priv->has_gct)
mode_dev->panel_wants_dither = (dev_priv->gct_data.
Panel_Port_Control & MRST_PANEL_8TO6_DITHER_ENABLE);
if (dev_priv->lvds_dither)
mode_dev->panel_wants_dither = 1;
/*
* LVDS discovery:
* 1) check for EDID on DDC
* 2) check for VBT data
* 3) check to see if LVDS is already on
* if none of the above, no panel
* 4) make sure lid is open
* if closed, act like it's not there for now
*/
mutex_lock(&dev->mode_config.mutex);
i2c_adap = i2c_get_adapter(dev_priv->ops->i2c_bus);
if (i2c_adap == NULL)
dev_err(dev->dev, "No ddc adapter available!\n");
/*
* Attempt to get the fixed panel mode from DDC. Assume that the
* preferred mode is the right one.
*/
if (i2c_adap) {
edid = drm_get_edid(connector, i2c_adap);
if (edid) {
drm_mode_connector_update_edid_property(connector,
edid);
drm_add_edid_modes(connector, edid);
kfree(edid);
}
list_for_each_entry(scan, &connector->probed_modes, head) {
if (scan->type & DRM_MODE_TYPE_PREFERRED) {
mode_dev->panel_fixed_mode =
drm_mode_duplicate(dev, scan);
goto out; /* FIXME: check for quirks */
}
}
}
/*
* If we didn't get EDID, try geting panel timing
* from configuration data
*/
oaktrail_lvds_get_configuration_mode(dev, mode_dev);
if (mode_dev->panel_fixed_mode) {
mode_dev->panel_fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
goto out; /* FIXME: check for quirks */
}
/* If we still don't have a mode after all that, give up. */
if (!mode_dev->panel_fixed_mode) {
dev_err(dev->dev, "Found no modes on the lvds, ignoring the LVDS\n");
goto failed_find;
}
out:
mutex_unlock(&dev->mode_config.mutex);
drm_sysfs_connector_add(connector);
return;
failed_find:
mutex_unlock(&dev->mode_config.mutex);
dev_dbg(dev->dev, "No LVDS modes found, disabling.\n");
if (gma_encoder->ddc_bus)
psb_intel_i2c_destroy(gma_encoder->ddc_bus);
/* failed_ddc: */
drm_encoder_cleanup(encoder);
drm_connector_cleanup(connector);
kfree(gma_connector);
failed_connector:
kfree(gma_encoder);
}