linux/drivers/clk/clk-max9485.c
Daniel Mack 33f5104624 clk: Add driver for MAX9485
This patch adds a driver for MAX9485, a programmable audio clock generator.

The device requires a 27.000 MHz clock input. It can provide a gated
buffered output of its input clock and two gated outputs of a PLL that can
generate one out of 16 discrete frequencies. There is only one PLL however,
so the two gated outputs will always have the same frequency but they can
be switched individually.

The driver for this device exposes 4 clocks in total:

- MAX9485_MCLKOUT:      A gated, buffered output of the input clock
- MAX9485_CLKOUT:       A PLL that can be configured to 16 different
			discrete frequencies
- MAX9485_CLKOUT[1,2]:  Two gated outputs for MAX9485_CLKOUT

Some PLL output frequencies can be achieved with different register
settings. The driver will select the one with lowest jitter in such cases.

Signed-off-by: Daniel Mack <daniel@zonque.org>
[sboyd@kernel.org: Use local variable for val in max9485_clkout_recalc_rate()
and shorten line of max9485_of_clk_get()]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-07-06 13:44:06 -07:00

388 lines
9.9 KiB
C

// SPDX-License-Identifier: GPL-2.0
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/err.h>
#include <linux/errno.h>
#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/regulator/consumer.h>
#include <dt-bindings/clock/maxim,max9485.h>
#define MAX9485_NUM_CLKS 4
/* This chip has only one register of 8 bit width. */
#define MAX9485_FS_12KHZ (0 << 0)
#define MAX9485_FS_32KHZ (1 << 0)
#define MAX9485_FS_44_1KHZ (2 << 0)
#define MAX9485_FS_48KHZ (3 << 0)
#define MAX9485_SCALE_256 (0 << 2)
#define MAX9485_SCALE_384 (1 << 2)
#define MAX9485_SCALE_768 (2 << 2)
#define MAX9485_DOUBLE BIT(4)
#define MAX9485_CLKOUT1_ENABLE BIT(5)
#define MAX9485_CLKOUT2_ENABLE BIT(6)
#define MAX9485_MCLK_ENABLE BIT(7)
#define MAX9485_FREQ_MASK 0x1f
struct max9485_rate {
unsigned long out;
u8 reg_value;
};
/*
* Ordered by frequency. For frequency the hardware can generate with
* multiple settings, the one with lowest jitter is listed first.
*/
static const struct max9485_rate max9485_rates[] = {
{ 3072000, MAX9485_FS_12KHZ | MAX9485_SCALE_256 },
{ 4608000, MAX9485_FS_12KHZ | MAX9485_SCALE_384 },
{ 8192000, MAX9485_FS_32KHZ | MAX9485_SCALE_256 },
{ 9126000, MAX9485_FS_12KHZ | MAX9485_SCALE_768 },
{ 11289600, MAX9485_FS_44_1KHZ | MAX9485_SCALE_256 },
{ 12288000, MAX9485_FS_48KHZ | MAX9485_SCALE_256 },
{ 12288000, MAX9485_FS_32KHZ | MAX9485_SCALE_384 },
{ 16384000, MAX9485_FS_32KHZ | MAX9485_SCALE_256 | MAX9485_DOUBLE },
{ 16934400, MAX9485_FS_44_1KHZ | MAX9485_SCALE_384 },
{ 18384000, MAX9485_FS_48KHZ | MAX9485_SCALE_384 },
{ 22579200, MAX9485_FS_44_1KHZ | MAX9485_SCALE_256 | MAX9485_DOUBLE },
{ 24576000, MAX9485_FS_48KHZ | MAX9485_SCALE_256 | MAX9485_DOUBLE },
{ 24576000, MAX9485_FS_32KHZ | MAX9485_SCALE_384 | MAX9485_DOUBLE },
{ 24576000, MAX9485_FS_32KHZ | MAX9485_SCALE_768 },
{ 33868800, MAX9485_FS_44_1KHZ | MAX9485_SCALE_384 | MAX9485_DOUBLE },
{ 33868800, MAX9485_FS_44_1KHZ | MAX9485_SCALE_768 },
{ 36864000, MAX9485_FS_48KHZ | MAX9485_SCALE_384 | MAX9485_DOUBLE },
{ 36864000, MAX9485_FS_48KHZ | MAX9485_SCALE_768 },
{ 49152000, MAX9485_FS_32KHZ | MAX9485_SCALE_768 | MAX9485_DOUBLE },
{ 67737600, MAX9485_FS_44_1KHZ | MAX9485_SCALE_768 | MAX9485_DOUBLE },
{ 73728000, MAX9485_FS_48KHZ | MAX9485_SCALE_768 | MAX9485_DOUBLE },
{ } /* sentinel */
};
struct max9485_driver_data;
struct max9485_clk_hw {
struct clk_hw hw;
struct clk_init_data init;
u8 enable_bit;
struct max9485_driver_data *drvdata;
};
struct max9485_driver_data {
struct clk *xclk;
struct i2c_client *client;
u8 reg_value;
struct regulator *supply;
struct gpio_desc *reset_gpio;
struct max9485_clk_hw hw[MAX9485_NUM_CLKS];
};
static inline struct max9485_clk_hw *to_max9485_clk(struct clk_hw *hw)
{
return container_of(hw, struct max9485_clk_hw, hw);
}
static int max9485_update_bits(struct max9485_driver_data *drvdata,
u8 mask, u8 value)
{
int ret;
drvdata->reg_value &= ~mask;
drvdata->reg_value |= value;
dev_dbg(&drvdata->client->dev,
"updating mask 0x%02x value 0x%02x -> 0x%02x\n",
mask, value, drvdata->reg_value);
ret = i2c_master_send(drvdata->client,
&drvdata->reg_value,
sizeof(drvdata->reg_value));
return ret < 0 ? ret : 0;
}
static int max9485_clk_prepare(struct clk_hw *hw)
{
struct max9485_clk_hw *clk_hw = to_max9485_clk(hw);
return max9485_update_bits(clk_hw->drvdata,
clk_hw->enable_bit,
clk_hw->enable_bit);
}
static void max9485_clk_unprepare(struct clk_hw *hw)
{
struct max9485_clk_hw *clk_hw = to_max9485_clk(hw);
max9485_update_bits(clk_hw->drvdata, clk_hw->enable_bit, 0);
}
/*
* CLKOUT - configurable clock output
*/
static int max9485_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct max9485_clk_hw *clk_hw = to_max9485_clk(hw);
const struct max9485_rate *entry;
for (entry = max9485_rates; entry->out != 0; entry++)
if (entry->out == rate)
break;
if (entry->out == 0)
return -EINVAL;
return max9485_update_bits(clk_hw->drvdata,
MAX9485_FREQ_MASK,
entry->reg_value);
}
static unsigned long max9485_clkout_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct max9485_clk_hw *clk_hw = to_max9485_clk(hw);
struct max9485_driver_data *drvdata = clk_hw->drvdata;
u8 val = drvdata->reg_value & MAX9485_FREQ_MASK;
const struct max9485_rate *entry;
for (entry = max9485_rates; entry->out != 0; entry++)
if (val == entry->reg_value)
return entry->out;
return 0;
}
static long max9485_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *parent_rate)
{
const struct max9485_rate *curr, *prev = NULL;
for (curr = max9485_rates; curr->out != 0; curr++) {
/* Exact matches */
if (curr->out == rate)
return rate;
/*
* Find the first entry that has a frequency higher than the
* requested one.
*/
if (curr->out > rate) {
unsigned int mid;
/*
* If this is the first entry, clamp the value to the
* lowest possible frequency.
*/
if (!prev)
return curr->out;
/*
* Otherwise, determine whether the previous entry or
* current one is closer.
*/
mid = prev->out + ((curr->out - prev->out) / 2);
return (mid > rate) ? prev->out : curr->out;
}
prev = curr;
}
/* If the last entry was still too high, clamp the value */
return prev->out;
}
struct max9485_clk {
const char *name;
int parent_index;
const struct clk_ops ops;
u8 enable_bit;
};
static const struct max9485_clk max9485_clks[MAX9485_NUM_CLKS] = {
[MAX9485_MCLKOUT] = {
.name = "mclkout",
.parent_index = -1,
.enable_bit = MAX9485_MCLK_ENABLE,
.ops = {
.prepare = max9485_clk_prepare,
.unprepare = max9485_clk_unprepare,
},
},
[MAX9485_CLKOUT] = {
.name = "clkout",
.parent_index = -1,
.ops = {
.set_rate = max9485_clkout_set_rate,
.round_rate = max9485_clkout_round_rate,
.recalc_rate = max9485_clkout_recalc_rate,
},
},
[MAX9485_CLKOUT1] = {
.name = "clkout1",
.parent_index = MAX9485_CLKOUT,
.enable_bit = MAX9485_CLKOUT1_ENABLE,
.ops = {
.prepare = max9485_clk_prepare,
.unprepare = max9485_clk_unprepare,
},
},
[MAX9485_CLKOUT2] = {
.name = "clkout2",
.parent_index = MAX9485_CLKOUT,
.enable_bit = MAX9485_CLKOUT2_ENABLE,
.ops = {
.prepare = max9485_clk_prepare,
.unprepare = max9485_clk_unprepare,
},
},
};
static struct clk_hw *
max9485_of_clk_get(struct of_phandle_args *clkspec, void *data)
{
struct max9485_driver_data *drvdata = data;
unsigned int idx = clkspec->args[0];
return &drvdata->hw[idx].hw;
}
static int max9485_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct max9485_driver_data *drvdata;
struct device *dev = &client->dev;
const char *xclk_name;
int i, ret;
drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
if (!drvdata)
return -ENOMEM;
drvdata->xclk = devm_clk_get(dev, "xclk");
if (IS_ERR(drvdata->xclk))
return PTR_ERR(drvdata->xclk);
xclk_name = __clk_get_name(drvdata->xclk);
drvdata->supply = devm_regulator_get(dev, "vdd");
if (IS_ERR(drvdata->supply))
return PTR_ERR(drvdata->supply);
ret = regulator_enable(drvdata->supply);
if (ret < 0)
return ret;
drvdata->reset_gpio =
devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
if (IS_ERR(drvdata->reset_gpio))
return PTR_ERR(drvdata->reset_gpio);
i2c_set_clientdata(client, drvdata);
drvdata->client = client;
ret = i2c_master_recv(drvdata->client, &drvdata->reg_value,
sizeof(drvdata->reg_value));
if (ret < 0) {
dev_warn(dev, "Unable to read device register: %d\n", ret);
return ret;
}
for (i = 0; i < MAX9485_NUM_CLKS; i++) {
int parent_index = max9485_clks[i].parent_index;
const char *name;
if (of_property_read_string_index(dev->of_node,
"clock-output-names",
i, &name) == 0) {
drvdata->hw[i].init.name = name;
} else {
drvdata->hw[i].init.name = max9485_clks[i].name;
}
drvdata->hw[i].init.ops = &max9485_clks[i].ops;
drvdata->hw[i].init.num_parents = 1;
drvdata->hw[i].init.flags = 0;
if (parent_index > 0) {
drvdata->hw[i].init.parent_names =
&drvdata->hw[parent_index].init.name;
drvdata->hw[i].init.flags |= CLK_SET_RATE_PARENT;
} else {
drvdata->hw[i].init.parent_names = &xclk_name;
}
drvdata->hw[i].enable_bit = max9485_clks[i].enable_bit;
drvdata->hw[i].hw.init = &drvdata->hw[i].init;
drvdata->hw[i].drvdata = drvdata;
ret = devm_clk_hw_register(dev, &drvdata->hw[i].hw);
if (ret < 0)
return ret;
}
return devm_of_clk_add_hw_provider(dev, max9485_of_clk_get, drvdata);
}
static int __maybe_unused max9485_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct max9485_driver_data *drvdata = i2c_get_clientdata(client);
gpiod_set_value_cansleep(drvdata->reset_gpio, 0);
return 0;
}
static int __maybe_unused max9485_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct max9485_driver_data *drvdata = i2c_get_clientdata(client);
int ret;
gpiod_set_value_cansleep(drvdata->reset_gpio, 1);
ret = i2c_master_send(client, &drvdata->reg_value,
sizeof(drvdata->reg_value));
return ret < 0 ? ret : 0;
}
static const struct dev_pm_ops max9485_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(max9485_suspend, max9485_resume)
};
static const struct of_device_id max9485_dt_ids[] = {
{ .compatible = "maxim,max9485", },
{ }
};
MODULE_DEVICE_TABLE(of, max9485_dt_ids);
static const struct i2c_device_id max9485_i2c_ids[] = {
{ .name = "max9485", },
{ }
};
MODULE_DEVICE_TABLE(i2c, max9485_i2c_ids);
static struct i2c_driver max9485_driver = {
.driver = {
.name = "max9485",
.pm = &max9485_pm_ops,
.of_match_table = max9485_dt_ids,
},
.probe = max9485_i2c_probe,
.id_table = max9485_i2c_ids,
};
module_i2c_driver(max9485_driver);
MODULE_AUTHOR("Daniel Mack <daniel@zonque.org>");
MODULE_DESCRIPTION("MAX9485 Programmable Audio Clock Generator");
MODULE_LICENSE("GPL v2");