linux/arch/arm/boot/dts/qcom-msm8660.dtsi
Rohit Vaswani 2ab27991c0 ARM: dts: qcom: Add nodes necessary for SMP boot
Add the necessary nodes to support SMP on MSM8660, MSM8960, and
MSM8974/APQ8074. While we're here also add in the error
interrupts for the Krait cache error detection.

Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org>
[sboyd: Split into separate patch, add error interrupts]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-02-20 10:00:07 -06:00

88 lines
1.7 KiB
Plaintext

/dts-v1/;
/include/ "skeleton.dtsi"
#include <dt-bindings/clock/qcom,gcc-msm8660.h>
/ {
model = "Qualcomm MSM8660";
compatible = "qcom,msm8660";
interrupt-parent = <&intc>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
compatible = "qcom,scorpion";
enable-method = "qcom,gcc-msm8660";
cpu@0 {
device_type = "cpu";
reg = <0>;
next-level-cache = <&L2>;
};
cpu@1 {
device_type = "cpu";
reg = <1>;
next-level-cache = <&L2>;
};
L2: l2-cache {
compatible = "cache";
cache-level = <2>;
};
};
intc: interrupt-controller@2080000 {
compatible = "qcom,msm-8660-qgic";
interrupt-controller;
#interrupt-cells = <3>;
reg = < 0x02080000 0x1000 >,
< 0x02081000 0x1000 >;
};
timer@2000000 {
compatible = "qcom,scss-timer", "qcom,msm-timer";
interrupts = <1 0 0x301>,
<1 1 0x301>,
<1 2 0x301>;
reg = <0x02000000 0x100>;
clock-frequency = <27000000>,
<32768>;
cpu-offset = <0x40000>;
};
msmgpio: gpio@800000 {
compatible = "qcom,msm-gpio";
reg = <0x00800000 0x4000>;
gpio-controller;
#gpio-cells = <2>;
ngpio = <173>;
interrupts = <0 16 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
};
gcc: clock-controller@900000 {
compatible = "qcom,gcc-msm8660";
#clock-cells = <1>;
#reset-cells = <1>;
reg = <0x900000 0x4000>;
};
serial@19c40000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x19c40000 0x1000>,
<0x19c00000 0x1000>;
interrupts = <0 195 0x0>;
clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
clock-names = "core", "iface";
};
qcom,ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
};
};