linux/drivers/mfd/rohm-bd718x7.c
Leonard Crestez 2a87f09020 mfd: bd718x7: Remove hardcoded config for button press duration
The reset button on imx8mm-evk is tied to PWRON_B pin of bd71847 and the
long press duration is set to zero from OTP. The linux driver overrides
those values and breaks reset from button.

Overwriting OTP or bootloader configuration with some hardcoded defaults
is not desirable, keep already programmed values instead.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Acked-By: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-07-02 12:11:31 +01:00

178 lines
4.5 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
//
// Copyright (C) 2018 ROHM Semiconductors
//
// ROHM BD71837MWV and BD71847MWV PMIC driver
//
// Datasheet for BD71837MWV available from
// https://www.rohm.com/datasheet/BD71837MWV/bd71837mwv-e
#include <linux/gpio_keys.h>
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/mfd/rohm-bd718x7.h>
#include <linux/mfd/core.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/regmap.h>
#include <linux/types.h>
static struct gpio_keys_button button = {
.code = KEY_POWER,
.gpio = -1,
.type = EV_KEY,
};
static struct gpio_keys_platform_data bd718xx_powerkey_data = {
.buttons = &button,
.nbuttons = 1,
.name = "bd718xx-pwrkey",
};
static struct mfd_cell bd718xx_mfd_cells[] = {
{
.name = "gpio-keys",
.platform_data = &bd718xx_powerkey_data,
.pdata_size = sizeof(bd718xx_powerkey_data),
},
{ .name = "bd718xx-clk", },
{ .name = "bd718xx-pmic", },
};
static const struct regmap_irq bd718xx_irqs[] = {
REGMAP_IRQ_REG(BD718XX_INT_SWRST, 0, BD718XX_INT_SWRST_MASK),
REGMAP_IRQ_REG(BD718XX_INT_PWRBTN_S, 0, BD718XX_INT_PWRBTN_S_MASK),
REGMAP_IRQ_REG(BD718XX_INT_PWRBTN_L, 0, BD718XX_INT_PWRBTN_L_MASK),
REGMAP_IRQ_REG(BD718XX_INT_PWRBTN, 0, BD718XX_INT_PWRBTN_MASK),
REGMAP_IRQ_REG(BD718XX_INT_WDOG, 0, BD718XX_INT_WDOG_MASK),
REGMAP_IRQ_REG(BD718XX_INT_ON_REQ, 0, BD718XX_INT_ON_REQ_MASK),
REGMAP_IRQ_REG(BD718XX_INT_STBY_REQ, 0, BD718XX_INT_STBY_REQ_MASK),
};
static struct regmap_irq_chip bd718xx_irq_chip = {
.name = "bd718xx-irq",
.irqs = bd718xx_irqs,
.num_irqs = ARRAY_SIZE(bd718xx_irqs),
.num_regs = 1,
.irq_reg_stride = 1,
.status_base = BD718XX_REG_IRQ,
.mask_base = BD718XX_REG_MIRQ,
.ack_base = BD718XX_REG_IRQ,
.init_ack_masked = true,
.mask_invert = false,
};
static const struct regmap_range pmic_status_range = {
.range_min = BD718XX_REG_IRQ,
.range_max = BD718XX_REG_POW_STATE,
};
static const struct regmap_access_table volatile_regs = {
.yes_ranges = &pmic_status_range,
.n_yes_ranges = 1,
};
static const struct regmap_config bd718xx_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.volatile_table = &volatile_regs,
.max_register = BD718XX_MAX_REGISTER - 1,
.cache_type = REGCACHE_RBTREE,
};
static int bd718xx_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct bd718xx *bd718xx;
int ret;
if (!i2c->irq) {
dev_err(&i2c->dev, "No IRQ configured\n");
return -EINVAL;
}
bd718xx = devm_kzalloc(&i2c->dev, sizeof(struct bd718xx), GFP_KERNEL);
if (!bd718xx)
return -ENOMEM;
bd718xx->chip_irq = i2c->irq;
bd718xx->chip.chip_type = (unsigned int)(uintptr_t)
of_device_get_match_data(&i2c->dev);
bd718xx->chip.dev = &i2c->dev;
dev_set_drvdata(&i2c->dev, bd718xx);
bd718xx->chip.regmap = devm_regmap_init_i2c(i2c,
&bd718xx_regmap_config);
if (IS_ERR(bd718xx->chip.regmap)) {
dev_err(&i2c->dev, "regmap initialization failed\n");
return PTR_ERR(bd718xx->chip.regmap);
}
ret = devm_regmap_add_irq_chip(&i2c->dev, bd718xx->chip.regmap,
bd718xx->chip_irq, IRQF_ONESHOT, 0,
&bd718xx_irq_chip, &bd718xx->irq_data);
if (ret) {
dev_err(&i2c->dev, "Failed to add irq_chip\n");
return ret;
}
ret = regmap_irq_get_virq(bd718xx->irq_data, BD718XX_INT_PWRBTN_S);
if (ret < 0) {
dev_err(&i2c->dev, "Failed to get the IRQ\n");
return ret;
}
button.irq = ret;
ret = devm_mfd_add_devices(bd718xx->chip.dev, PLATFORM_DEVID_AUTO,
bd718xx_mfd_cells,
ARRAY_SIZE(bd718xx_mfd_cells), NULL, 0,
regmap_irq_get_domain(bd718xx->irq_data));
if (ret)
dev_err(&i2c->dev, "Failed to create subdevices\n");
return ret;
}
static const struct of_device_id bd718xx_of_match[] = {
{
.compatible = "rohm,bd71837",
.data = (void *)ROHM_CHIP_TYPE_BD71837,
},
{
.compatible = "rohm,bd71847",
.data = (void *)ROHM_CHIP_TYPE_BD71847,
},
{ }
};
MODULE_DEVICE_TABLE(of, bd718xx_of_match);
static struct i2c_driver bd718xx_i2c_driver = {
.driver = {
.name = "rohm-bd718x7",
.of_match_table = bd718xx_of_match,
},
.probe = bd718xx_i2c_probe,
};
static int __init bd718xx_i2c_init(void)
{
return i2c_add_driver(&bd718xx_i2c_driver);
}
/* Initialise early so consumer devices can complete system boot */
subsys_initcall(bd718xx_i2c_init);
static void __exit bd718xx_i2c_exit(void)
{
i2c_del_driver(&bd718xx_i2c_driver);
}
module_exit(bd718xx_i2c_exit);
MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
MODULE_DESCRIPTION("ROHM BD71837/BD71847 Power Management IC driver");
MODULE_LICENSE("GPL");