linux/arch/powerpc/kvm/Makefile
Bharata B Rao ca9f494267 KVM: PPC: Book3S HV: Support for running secure guests
A pseries guest can be run as secure guest on Ultravisor-enabled
POWER platforms. On such platforms, this driver will be used to manage
the movement of guest pages between the normal memory managed by
hypervisor (HV) and secure memory managed by Ultravisor (UV).

HV is informed about the guest's transition to secure mode via hcalls:

H_SVM_INIT_START: Initiate securing a VM
H_SVM_INIT_DONE: Conclude securing a VM

As part of H_SVM_INIT_START, register all existing memslots with
the UV. H_SVM_INIT_DONE call by UV informs HV that transition of
the guest to secure mode is complete.

These two states (transition to secure mode STARTED and transition
to secure mode COMPLETED) are recorded in kvm->arch.secure_guest.
Setting these states will cause the assembly code that enters the
guest to call the UV_RETURN ucall instead of trying to enter the
guest directly.

Migration of pages betwen normal and secure memory of secure
guest is implemented in H_SVM_PAGE_IN and H_SVM_PAGE_OUT hcalls.

H_SVM_PAGE_IN: Move the content of a normal page to secure page
H_SVM_PAGE_OUT: Move the content of a secure page to normal page

Private ZONE_DEVICE memory equal to the amount of secure memory
available in the platform for running secure guests is created.
Whenever a page belonging to the guest becomes secure, a page from
this private device memory is used to represent and track that secure
page on the HV side. The movement of pages between normal and secure
memory is done via migrate_vma_pages() using UV_PAGE_IN and
UV_PAGE_OUT ucalls.

In order to prevent the device private pages (that correspond to pages
of secure guest) from participating in KSM merging, H_SVM_PAGE_IN
calls ksm_madvise() under read version of mmap_sem. However
ksm_madvise() needs to be under write lock.  Hence we call
kvmppc_svm_page_in with mmap_sem held for writing, and it then
downgrades to a read lock after calling ksm_madvise.

[paulus@ozlabs.org - roll in patch "KVM: PPC: Book3S HV: Take write
 mmap_sem when calling ksm_madvise"]

Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2019-11-28 16:30:02 +11:00

139 lines
3.2 KiB
Makefile

# SPDX-License-Identifier: GPL-2.0
#
# Makefile for Kernel-based Virtual Machine module
#
ccflags-y := -Ivirt/kvm -Iarch/powerpc/kvm
KVM := ../../../virt/kvm
common-objs-y = $(KVM)/kvm_main.o $(KVM)/eventfd.o
common-objs-$(CONFIG_KVM_VFIO) += $(KVM)/vfio.o
common-objs-$(CONFIG_KVM_MMIO) += $(KVM)/coalesced_mmio.o
common-objs-y += powerpc.o emulate_loadstore.o
obj-$(CONFIG_KVM_EXIT_TIMING) += timing.o
obj-$(CONFIG_KVM_BOOK3S_HANDLER) += book3s_exports.o
AFLAGS_booke_interrupts.o := -I$(objtree)/$(obj)
kvm-e500-objs := \
$(common-objs-y) \
emulate.o \
booke.o \
booke_emulate.o \
booke_interrupts.o \
e500.o \
e500_mmu.o \
e500_mmu_host.o \
e500_emulate.o
kvm-objs-$(CONFIG_KVM_E500V2) := $(kvm-e500-objs)
kvm-e500mc-objs := \
$(common-objs-y) \
emulate.o \
booke.o \
booke_emulate.o \
bookehv_interrupts.o \
e500mc.o \
e500_mmu.o \
e500_mmu_host.o \
e500_emulate.o
kvm-objs-$(CONFIG_KVM_E500MC) := $(kvm-e500mc-objs)
kvm-book3s_64-builtin-objs-$(CONFIG_SPAPR_TCE_IOMMU) := \
book3s_64_vio_hv.o
kvm-pr-y := \
fpu.o \
emulate.o \
book3s_paired_singles.o \
book3s_pr.o \
book3s_pr_papr.o \
book3s_emulate.o \
book3s_interrupts.o \
book3s_mmu_hpte.o \
book3s_64_mmu_host.o \
book3s_64_mmu.o \
book3s_32_mmu.o
kvm-book3s_64-builtin-objs-$(CONFIG_KVM_BOOK3S_64_HANDLER) += \
tm.o
ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
kvm-book3s_64-builtin-objs-$(CONFIG_KVM_BOOK3S_64_HANDLER) += \
book3s_rmhandlers.o
endif
kvm-hv-y += \
book3s_hv.o \
book3s_hv_interrupts.o \
book3s_64_mmu_hv.o \
book3s_64_mmu_radix.o \
book3s_hv_nested.o
kvm-hv-$(CONFIG_PPC_UV) += \
book3s_hv_uvmem.o
kvm-hv-$(CONFIG_PPC_TRANSACTIONAL_MEM) += \
book3s_hv_tm.o
kvm-book3s_64-builtin-xics-objs-$(CONFIG_KVM_XICS) := \
book3s_hv_rm_xics.o book3s_hv_rm_xive.o
kvm-book3s_64-builtin-tm-objs-$(CONFIG_PPC_TRANSACTIONAL_MEM) += \
book3s_hv_tm_builtin.o
ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
kvm-book3s_64-builtin-objs-$(CONFIG_KVM_BOOK3S_64_HANDLER) += \
book3s_hv_hmi.o \
book3s_hv_rmhandlers.o \
book3s_hv_rm_mmu.o \
book3s_hv_ras.o \
book3s_hv_builtin.o \
$(kvm-book3s_64-builtin-tm-objs-y) \
$(kvm-book3s_64-builtin-xics-objs-y)
endif
kvm-book3s_64-objs-$(CONFIG_KVM_XICS) += \
book3s_xics.o
kvm-book3s_64-objs-$(CONFIG_KVM_XIVE) += book3s_xive.o book3s_xive_native.o
kvm-book3s_64-objs-$(CONFIG_SPAPR_TCE_IOMMU) += book3s_64_vio.o
kvm-book3s_64-module-objs := \
$(common-objs-y) \
book3s.o \
book3s_rtas.o \
$(kvm-book3s_64-objs-y)
kvm-objs-$(CONFIG_KVM_BOOK3S_64) := $(kvm-book3s_64-module-objs)
kvm-book3s_32-objs := \
$(common-objs-y) \
emulate.o \
fpu.o \
book3s_paired_singles.o \
book3s.o \
book3s_pr.o \
book3s_emulate.o \
book3s_interrupts.o \
book3s_mmu_hpte.o \
book3s_32_mmu_host.o \
book3s_32_mmu.o
kvm-objs-$(CONFIG_KVM_BOOK3S_32) := $(kvm-book3s_32-objs)
kvm-objs-$(CONFIG_KVM_MPIC) += mpic.o
kvm-objs-$(CONFIG_HAVE_KVM_IRQ_ROUTING) += $(KVM)/irqchip.o
kvm-objs := $(kvm-objs-m) $(kvm-objs-y)
obj-$(CONFIG_KVM_E500V2) += kvm.o
obj-$(CONFIG_KVM_E500MC) += kvm.o
obj-$(CONFIG_KVM_BOOK3S_64) += kvm.o
obj-$(CONFIG_KVM_BOOK3S_32) += kvm.o
obj-$(CONFIG_KVM_BOOK3S_64_PR) += kvm-pr.o
obj-$(CONFIG_KVM_BOOK3S_64_HV) += kvm-hv.o
obj-y += $(kvm-book3s_64-builtin-objs-y)