linux/arch/arm/mach-omap1/board-h3-mmc.c
Tony Lindgren 2a12400eed omap: Fix spotty MMC voltages
As noted by Michał Mirosław <mirqus@gmail.com>, the voltages should
cover the supported voltage range, or support only one voltage.

As all these boards are using a GPIO to enable the power, chances
are that only 3.3V cards are supported on these boards.

Reported-by: Michał Mirosław <mirqus@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-10-12 16:07:51 -07:00

70 lines
1.6 KiB
C

/*
* linux/arch/arm/mach-omap1/board-h3-mmc.c
*
* Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT
* Author: Felipe Balbi <felipe.lima@indt.org.br>
*
* This code is based on linux/arch/arm/mach-omap2/board-n800-mmc.c, which is:
* Copyright (C) 2006 Nokia Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/i2c/tps65010.h>
#include <plat/mmc.h>
#include <mach/gpio.h>
#include "board-h3.h"
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
static int mmc_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
gpio_set_value(H3_TPS_GPIO_MMC_PWR_EN, power_on);
return 0;
}
/*
* H3 could use the following functions tested:
* - mmc_get_cover_state that uses OMAP_MPUIO(1)
* - mmc_get_wp that maybe uses OMAP_MPUIO(3)
*/
static struct omap_mmc_platform_data mmc1_data = {
.nr_slots = 1,
.dma_mask = 0xffffffff,
.slots[0] = {
.set_power = mmc_set_power,
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.name = "mmcblk",
},
};
static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC];
void __init h3_mmc_init(void)
{
int ret;
ret = gpio_request(H3_TPS_GPIO_MMC_PWR_EN, "MMC power");
if (ret < 0)
return;
gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 0);
mmc_data[0] = &mmc1_data;
omap1_init_mmc(mmc_data, OMAP16XX_NR_MMC);
}
#else
void __init h3_mmc_init(void)
{
}
#endif