linux/arch/powerpc/mm/init_32.c
Thomas Gleixner 2874c5fd28 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:32 -07:00

185 lines
4.6 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* PowerPC version
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
*
* Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
* and Cort Dougan (PReP) (cort@cs.nmt.edu)
* Copyright (C) 1996 Paul Mackerras
* PPC44x/36-bit changes by Matt Porter (mporter@mvista.com)
*
* Derived from "arch/i386/mm/init.c"
* Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
*/
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/stddef.h>
#include <linux/init.h>
#include <linux/highmem.h>
#include <linux/initrd.h>
#include <linux/pagemap.h>
#include <linux/memblock.h>
#include <linux/gfp.h>
#include <linux/slab.h>
#include <linux/hugetlb.h>
#include <asm/pgalloc.h>
#include <asm/prom.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/mmu.h>
#include <asm/smp.h>
#include <asm/machdep.h>
#include <asm/btext.h>
#include <asm/tlb.h>
#include <asm/sections.h>
#include <asm/hugetlb.h>
#include <asm/kup.h>
#include <asm/kasan.h>
#include <mm/mmu_decl.h>
#if defined(CONFIG_KERNEL_START_BOOL) || defined(CONFIG_LOWMEM_SIZE_BOOL)
/* The amount of lowmem must be within 0xF0000000 - KERNELBASE. */
#if (CONFIG_LOWMEM_SIZE > (0xF0000000 - PAGE_OFFSET))
#error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_KERNEL_START"
#endif
#endif
#define MAX_LOW_MEM CONFIG_LOWMEM_SIZE
phys_addr_t total_memory;
phys_addr_t total_lowmem;
phys_addr_t memstart_addr = (phys_addr_t)~0ull;
EXPORT_SYMBOL(memstart_addr);
phys_addr_t kernstart_addr;
EXPORT_SYMBOL(kernstart_addr);
#ifdef CONFIG_RELOCATABLE
/* Used in __va()/__pa() */
long long virt_phys_offset;
EXPORT_SYMBOL(virt_phys_offset);
#endif
phys_addr_t lowmem_end_addr;
int boot_mapsize;
#ifdef CONFIG_PPC_PMAC
unsigned long agp_special_page;
EXPORT_SYMBOL(agp_special_page);
#endif
void MMU_init(void);
/*
* this tells the system to map all of ram with the segregs
* (i.e. page tables) instead of the bats.
* -- Cort
*/
int __map_without_bats;
int __map_without_ltlbs;
/* max amount of low RAM to map in */
unsigned long __max_low_memory = MAX_LOW_MEM;
/*
* Check for command-line options that affect what MMU_init will do.
*/
static void __init MMU_setup(void)
{
/* Check for nobats option (used in mapin_ram). */
if (strstr(boot_command_line, "nobats")) {
__map_without_bats = 1;
}
if (strstr(boot_command_line, "noltlbs")) {
__map_without_ltlbs = 1;
}
if (debug_pagealloc_enabled()) {
__map_without_bats = 1;
__map_without_ltlbs = 1;
}
if (strict_kernel_rwx_enabled() && !IS_ENABLED(CONFIG_PPC_8xx))
__map_without_ltlbs = 1;
}
/*
* MMU_init sets up the basic memory mappings for the kernel,
* including both RAM and possibly some I/O regions,
* and sets up the page tables and the MMU hardware ready to go.
*/
void __init MMU_init(void)
{
if (ppc_md.progress)
ppc_md.progress("MMU:enter", 0x111);
/* parse args from command line */
MMU_setup();
/*
* Reserve gigantic pages for hugetlb. This MUST occur before
* lowmem_end_addr is initialized below.
*/
if (memblock.memory.cnt > 1) {
#ifndef CONFIG_WII
memblock_enforce_memory_limit(memblock.memory.regions[0].size);
pr_warn("Only using first contiguous memory region\n");
#else
wii_memory_fixups();
#endif
}
total_lowmem = total_memory = memblock_end_of_DRAM() - memstart_addr;
lowmem_end_addr = memstart_addr + total_lowmem;
#ifdef CONFIG_FSL_BOOKE
/* Freescale Book-E parts expect lowmem to be mapped by fixed TLB
* entries, so we need to adjust lowmem to match the amount we can map
* in the fixed entries */
adjust_total_lowmem();
#endif /* CONFIG_FSL_BOOKE */
if (total_lowmem > __max_low_memory) {
total_lowmem = __max_low_memory;
lowmem_end_addr = memstart_addr + total_lowmem;
#ifndef CONFIG_HIGHMEM
total_memory = total_lowmem;
memblock_enforce_memory_limit(total_lowmem);
#endif /* CONFIG_HIGHMEM */
}
/* Initialize the MMU hardware */
if (ppc_md.progress)
ppc_md.progress("MMU:hw init", 0x300);
MMU_init_hw();
/* Map in all of RAM starting at KERNELBASE */
if (ppc_md.progress)
ppc_md.progress("MMU:mapin", 0x301);
mapin_ram();
/* Initialize early top-down ioremap allocator */
ioremap_bot = IOREMAP_TOP;
if (ppc_md.progress)
ppc_md.progress("MMU:exit", 0x211);
/* From now on, btext is no longer BAT mapped if it was at all */
#ifdef CONFIG_BOOTX_TEXT
btext_unmap();
#endif
kasan_mmu_init();
setup_kup();
/* Shortly after that, the entire linear mapping will be available */
memblock_set_current_limit(lowmem_end_addr);
}