linux/arch/arm/mach-pxa/corgi_pm.c
Rob Herring 23019a733b ARM: pxa: use common IOMEM definition
pxa was missed in the moving of IOMEM to a common definition, so lots of
IOMEM redefined warnings were introduced. So remove pxa IOMEM definition
and fix all the fallout.

Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Haojian Zhuang <haojian.zhuang@marvell.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: rtc-linux@googlegroups.com
Cc: alsa-devel@alsa-project.org
2012-03-25 14:36:31 -05:00

232 lines
6.2 KiB
C

/*
* Battery and Power Management code for the Sharp SL-C7xx
*
* Copyright (c) 2005 Richard Purdie
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/module.h>
#include <linux/stat.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/gpio-pxa.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/apm-emulation.h>
#include <linux/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <mach/corgi.h>
#include <mach/pxa2xx-regs.h>
#include <mach/sharpsl_pm.h>
#include "generic.h"
#define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */
#define SHARPSL_CHARGE_ON_TEMP 0xe0 /* 2.9V */
#define SHARPSL_CHARGE_ON_ACIN_HIGH 0x9b /* 6V */
#define SHARPSL_CHARGE_ON_ACIN_LOW 0x34 /* 2V */
#define SHARPSL_FATAL_ACIN_VOLT 182 /* 3.45V */
#define SHARPSL_FATAL_NOACIN_VOLT 170 /* 3.40V */
static struct gpio charger_gpios[] = {
{ CORGI_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" },
{ CORGI_GPIO_CHRG_ON, GPIOF_OUT_INIT_LOW, "Charger On" },
{ CORGI_GPIO_CHRG_UKN, GPIOF_OUT_INIT_LOW, "Charger Unknown" },
{ CORGI_GPIO_AC_IN, GPIOF_IN, "Charger Detection" },
{ CORGI_GPIO_KEY_INT, GPIOF_IN, "Key Interrupt" },
{ CORGI_GPIO_WAKEUP, GPIOF_IN, "System wakeup notification" },
};
static void corgi_charger_init(void)
{
gpio_request_array(ARRAY_AND_SIZE(charger_gpios));
}
static void corgi_measure_temp(int on)
{
gpio_set_value(CORGI_GPIO_ADC_TEMP_ON, on);
}
static void corgi_charge(int on)
{
if (on) {
if (machine_is_corgi() && (sharpsl_pm.flags & SHARPSL_SUSPENDED)) {
gpio_set_value(CORGI_GPIO_CHRG_ON, 0);
gpio_set_value(CORGI_GPIO_CHRG_UKN, 1);
} else {
gpio_set_value(CORGI_GPIO_CHRG_ON, 1);
gpio_set_value(CORGI_GPIO_CHRG_UKN, 0);
}
} else {
gpio_set_value(CORGI_GPIO_CHRG_ON, 0);
gpio_set_value(CORGI_GPIO_CHRG_UKN, 0);
}
}
static void corgi_discharge(int on)
{
gpio_set_value(CORGI_GPIO_DISCHARGE_ON, on);
}
static void corgi_presuspend(void)
{
}
static void corgi_postsuspend(void)
{
}
/*
* Check what brought us out of the suspend.
* Return: 0 to sleep, otherwise wake
*/
static int corgi_should_wakeup(unsigned int resume_on_alarm)
{
int is_resume = 0;
dev_dbg(sharpsl_pm.dev, "PEDR = %x, GPIO_AC_IN = %d, "
"GPIO_CHRG_FULL = %d, GPIO_KEY_INT = %d, GPIO_WAKEUP = %d\n",
PEDR, gpio_get_value(CORGI_GPIO_AC_IN),
gpio_get_value(CORGI_GPIO_CHRG_FULL),
gpio_get_value(CORGI_GPIO_KEY_INT),
gpio_get_value(CORGI_GPIO_WAKEUP));
if ((PEDR & GPIO_bit(CORGI_GPIO_AC_IN))) {
if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
/* charge on */
dev_dbg(sharpsl_pm.dev, "ac insert\n");
sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
} else {
/* charge off */
dev_dbg(sharpsl_pm.dev, "ac remove\n");
sharpsl_pm_led(SHARPSL_LED_OFF);
sharpsl_pm.machinfo->charge(0);
sharpsl_pm.charge_mode = CHRG_OFF;
}
}
if ((PEDR & GPIO_bit(CORGI_GPIO_CHRG_FULL)))
dev_dbg(sharpsl_pm.dev, "Charge full interrupt\n");
if (PEDR & GPIO_bit(CORGI_GPIO_KEY_INT))
is_resume |= GPIO_bit(CORGI_GPIO_KEY_INT);
if (PEDR & GPIO_bit(CORGI_GPIO_WAKEUP))
is_resume |= GPIO_bit(CORGI_GPIO_WAKEUP);
if (resume_on_alarm && (PEDR & PWER_RTC))
is_resume |= PWER_RTC;
dev_dbg(sharpsl_pm.dev, "is_resume: %x\n",is_resume);
return is_resume;
}
static unsigned long corgi_charger_wakeup(void)
{
unsigned long ret;
ret = (!gpio_get_value(CORGI_GPIO_AC_IN) << GPIO_bit(CORGI_GPIO_AC_IN))
| (!gpio_get_value(CORGI_GPIO_KEY_INT)
<< GPIO_bit(CORGI_GPIO_KEY_INT))
| (!gpio_get_value(CORGI_GPIO_WAKEUP)
<< GPIO_bit(CORGI_GPIO_WAKEUP));
return ret;
}
unsigned long corgipm_read_devdata(int type)
{
switch(type) {
case SHARPSL_STATUS_ACIN:
return !gpio_get_value(CORGI_GPIO_AC_IN);
case SHARPSL_STATUS_LOCK:
return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock);
case SHARPSL_STATUS_CHRGFULL:
return gpio_get_value(sharpsl_pm.machinfo->gpio_batfull);
case SHARPSL_STATUS_FATAL:
return gpio_get_value(sharpsl_pm.machinfo->gpio_fatal);
case SHARPSL_ACIN_VOLT:
return sharpsl_pm_pxa_read_max1111(MAX1111_ACIN_VOLT);
case SHARPSL_BATT_TEMP:
return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_TEMP);
case SHARPSL_BATT_VOLT:
default:
return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_VOLT);
}
}
static struct sharpsl_charger_machinfo corgi_pm_machinfo = {
.init = corgi_charger_init,
.exit = NULL,
.gpio_batlock = CORGI_GPIO_BAT_COVER,
.gpio_acin = CORGI_GPIO_AC_IN,
.gpio_batfull = CORGI_GPIO_CHRG_FULL,
.discharge = corgi_discharge,
.charge = corgi_charge,
.measure_temp = corgi_measure_temp,
.presuspend = corgi_presuspend,
.postsuspend = corgi_postsuspend,
.read_devdata = corgipm_read_devdata,
.charger_wakeup = corgi_charger_wakeup,
.should_wakeup = corgi_should_wakeup,
#if defined(CONFIG_LCD_CORGI)
.backlight_limit = corgi_lcd_limit_intensity,
#endif
.charge_on_volt = SHARPSL_CHARGE_ON_VOLT,
.charge_on_temp = SHARPSL_CHARGE_ON_TEMP,
.charge_acin_high = SHARPSL_CHARGE_ON_ACIN_HIGH,
.charge_acin_low = SHARPSL_CHARGE_ON_ACIN_LOW,
.fatal_acin_volt = SHARPSL_FATAL_ACIN_VOLT,
.fatal_noacin_volt= SHARPSL_FATAL_NOACIN_VOLT,
.bat_levels = 40,
.bat_levels_noac = sharpsl_battery_levels_noac,
.bat_levels_acin = sharpsl_battery_levels_acin,
.status_high_acin = 188,
.status_low_acin = 178,
.status_high_noac = 185,
.status_low_noac = 175,
};
static struct platform_device *corgipm_device;
static int __devinit corgipm_init(void)
{
int ret;
if (!machine_is_corgi() && !machine_is_shepherd()
&& !machine_is_husky())
return -ENODEV;
corgipm_device = platform_device_alloc("sharpsl-pm", -1);
if (!corgipm_device)
return -ENOMEM;
if (!machine_is_corgi())
corgi_pm_machinfo.batfull_irq = 1;
corgipm_device->dev.platform_data = &corgi_pm_machinfo;
ret = platform_device_add(corgipm_device);
if (ret)
platform_device_put(corgipm_device);
return ret;
}
static void corgipm_exit(void)
{
platform_device_unregister(corgipm_device);
}
module_init(corgipm_init);
module_exit(corgipm_exit);