linux/drivers/thermal/cpuidle_cooling.c
Linus Torvalds 667de5c684 More thermal control updates for 6.4-rc1
- Add compatible DT bindings for imx6sll and imx6ul to fix a dtbs check
    warning (Stefan Wahren).
 
  - Update the example in the DT bindings to reflect changes with the
    ADC node name for QCom TM and TM5 (Marijn Suijten).
 
  - Fix comments for the cpuidle_cooling_register() function to match the
    function prototype (Chenggang Wang).
 
  - Fix inconsistent temperature read and some Mediatek variant board
    reboot by reverting a change and handling the temperature
    differently (AngeloGioacchino Del Regno).
 
  - Fix a memory leak in the initialization error path for the Mediatek
    driver (Kang Chen).
 
  - Use of_address_to_resource() in the Mediatek driver (Rob Herring).
 
  - Fix unit address in the QCom tsens driver DT bindings (Krzysztof
    Kozlowski).
 
  - Clean up the step-wise thermal governor (Zhang Rui).
 
  - Introduce thermal_zone_device() for accessing the device field of
    struct thermal_zone_device and two drivers use it (Daniel Lezcano).
 
  - Clean up the ACPI thermal driver a bit (Daniel Lezcano).
 
  - Delete the thermal driver for Intel Menlow platforms that is not
    expected to have any users (Rafael Wysocki).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmRSa9kSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxlv8P/j84O8Sds7Zb5jA9r3RYtZ07iqMHjjV6
 EUjS+aZ33d2koQ+X2m+ZqJZ51XmbFMEmtz0jc7zoSwOReMYQhnf1dm/EFvEIJvej
 zNT1wFEhtLtVoMMsTygKywH6sTEbGCi5i+QybN+n96qOwYqI2LaSvfqygkGT9yGC
 b4H42o4S34JcV4Ofdhzd9H7p6AQheKBpvNfAF86DShVioNQZGY0KgOw73bpt+HO0
 9LASf5VN78rS++0JxoJ4tza0VMWM/UdkYmxpj4v2lq6GKUEQlu2XFGCjs3NBEaG8
 CMe4ZEqJXVgGsEwFmEgzzUi9doqFL7vQdRb9LHa/LdHBRF8Eba1VbNLHZQY0mMTZ
 4wgjdyXmuH9dt1cITNJG+ZPXC6xNbjydKgDG++hw7fZ3oOUZnZsndy1uc0Nl56ao
 pNurhxxOZIpMs/EqP8yv+4FKEk2fOQXFEC8Ppo+clKme4DWmK5/ICuiKi0eFzZcG
 kAS3wzeDgXGJyumPUP2/qIoMcKEVtbXypqlE55ILwC1DF5XE4TnMfWxVndMW52Qr
 ZYW3JcPFZdST8afFZ0yXKSF1zyXmrwG8qKCcIzO/7m0/UkHoTujrPJ0/0sQsdv9a
 nrG0P40ygVfHRCLDRjWp7VQrj0PSHdzYx/X82xkLmHxAPShJ+LuUm4dFOZ224y2b
 UnrEvlq+rVSW
 =/bW2
 -----END PGP SIGNATURE-----

Merge tag 'thermal-6.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more thermal control updates from Rafael Wysocki:
 "These are mostly cleanups on top of the previously merged thermal
  control changes plus some driver fixes and the removal of the Intel
  Menlow thermal driver.

  Specifics:

   - Add compatible DT bindings for imx6sll and imx6ul to fix a dtbs
     check warning (Stefan Wahren)

   - Update the example in the DT bindings to reflect changes with the
     ADC node name for QCom TM and TM5 (Marijn Suijten)

   - Fix comments for the cpuidle_cooling_register() function to match
     the function prototype (Chenggang Wang)

   - Fix inconsistent temperature read and some Mediatek variant board
     reboot by reverting a change and handling the temperature
     differently (AngeloGioacchino Del Regno)

   - Fix a memory leak in the initialization error path for the Mediatek
     driver (Kang Chen)

   - Use of_address_to_resource() in the Mediatek driver (Rob Herring)

   - Fix unit address in the QCom tsens driver DT bindings (Krzysztof
     Kozlowski)

   - Clean up the step-wise thermal governor (Zhang Rui)

   - Introduce thermal_zone_device() for accessing the device field of
     struct thermal_zone_device and two drivers use it (Daniel Lezcano)

   - Clean up the ACPI thermal driver a bit (Daniel Lezcano)

   - Delete the thermal driver for Intel Menlow platforms that is not
     expected to have any users (Rafael Wysocki)"

* tag 'thermal-6.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: intel: menlow: Get rid of this driver
  ACPI: thermal: Move to dedicated function sysfs extra attr creation
  ACPI: thermal: Use thermal_zone_device()
  thermal: intel: pch_thermal: Use thermal driver device to write a trace
  thermal: core: Encapsulate tz->device field
  thermal: gov_step_wise: Adjust code logic to match comment
  thermal: gov_step_wise: Delete obsolete comment
  dt-bindings: thermal: qcom-tsens: Correct unit address
  thermal/drivers/mediatek: Use of_address_to_resource()
  thermal/drivers/mediatek: Change clk_prepare_enable to devm_clk_get_enabled in mtk_thermal_probe
  thermal/drivers/mediatek: Use devm_of_iomap to avoid resource leak in mtk_thermal_probe
  thermal/drivers/mediatek: Add temperature constraints to validate read
  Revert "thermal/drivers/mediatek: Add delay after thermal banks initialization"
  thermal/drivers/cpuidle_cooling: Delete unmatched comments
  dt-bindings: thermal: Use generic ADC node name in examples
  dt-bindings: imx-thermal: Add imx6sll and imx6ul compatible
2023-05-03 11:46:01 -07:00

271 lines
7.3 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2019 Linaro Limited.
*
* Author: Daniel Lezcano <daniel.lezcano@linaro.org>
*
*/
#define pr_fmt(fmt) "cpuidle cooling: " fmt
#include <linux/cpu.h>
#include <linux/cpu_cooling.h>
#include <linux/cpuidle.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/idle_inject.h>
#include <linux/of.h>
#include <linux/slab.h>
#include <linux/thermal.h>
/**
* struct cpuidle_cooling_device - data for the idle cooling device
* @ii_dev: an atomic to keep track of the last task exiting the idle cycle
* @state: a normalized integer giving the state of the cooling device
*/
struct cpuidle_cooling_device {
struct idle_inject_device *ii_dev;
unsigned long state;
};
/**
* cpuidle_cooling_runtime - Running time computation
* @idle_duration_us: CPU idle time to inject in microseconds
* @state: a percentile based number
*
* The running duration is computed from the idle injection duration
* which is fixed. If we reach 100% of idle injection ratio, that
* means the running duration is zero. If we have a 50% ratio
* injection, that means we have equal duration for idle and for
* running duration.
*
* The formula is deduced as follows:
*
* running = idle x ((100 / ratio) - 1)
*
* For precision purpose for integer math, we use the following:
*
* running = (idle x 100) / ratio - idle
*
* For example, if we have an injected duration of 50%, then we end up
* with 10ms of idle injection and 10ms of running duration.
*
* Return: An unsigned int for a usec based runtime duration.
*/
static unsigned int cpuidle_cooling_runtime(unsigned int idle_duration_us,
unsigned long state)
{
if (!state)
return 0;
return ((idle_duration_us * 100) / state) - idle_duration_us;
}
/**
* cpuidle_cooling_get_max_state - Get the maximum state
* @cdev : the thermal cooling device
* @state : a pointer to the state variable to be filled
*
* The function always returns 100 as the injection ratio. It is
* percentile based for consistency accross different platforms.
*
* Return: The function can not fail, it is always zero
*/
static int cpuidle_cooling_get_max_state(struct thermal_cooling_device *cdev,
unsigned long *state)
{
/*
* Depending on the configuration or the hardware, the running
* cycle and the idle cycle could be different. We want to
* unify that to an 0..100 interval, so the set state
* interface will be the same whatever the platform is.
*
* The state 100% will make the cluster 100% ... idle. A 0%
* injection ratio means no idle injection at all and 50%
* means for 10ms of idle injection, we have 10ms of running
* time.
*/
*state = 100;
return 0;
}
/**
* cpuidle_cooling_get_cur_state - Get the current cooling state
* @cdev: the thermal cooling device
* @state: a pointer to the state
*
* The function just copies the state value from the private thermal
* cooling device structure, the mapping is 1 <-> 1.
*
* Return: The function can not fail, it is always zero
*/
static int cpuidle_cooling_get_cur_state(struct thermal_cooling_device *cdev,
unsigned long *state)
{
struct cpuidle_cooling_device *idle_cdev = cdev->devdata;
*state = idle_cdev->state;
return 0;
}
/**
* cpuidle_cooling_set_cur_state - Set the current cooling state
* @cdev: the thermal cooling device
* @state: the target state
*
* The function checks first if we are initiating the mitigation which
* in turn wakes up all the idle injection tasks belonging to the idle
* cooling device. In any case, it updates the internal state for the
* cooling device.
*
* Return: The function can not fail, it is always zero
*/
static int cpuidle_cooling_set_cur_state(struct thermal_cooling_device *cdev,
unsigned long state)
{
struct cpuidle_cooling_device *idle_cdev = cdev->devdata;
struct idle_inject_device *ii_dev = idle_cdev->ii_dev;
unsigned long current_state = idle_cdev->state;
unsigned int runtime_us, idle_duration_us;
idle_cdev->state = state;
idle_inject_get_duration(ii_dev, &runtime_us, &idle_duration_us);
runtime_us = cpuidle_cooling_runtime(idle_duration_us, state);
idle_inject_set_duration(ii_dev, runtime_us, idle_duration_us);
if (current_state == 0 && state > 0) {
idle_inject_start(ii_dev);
} else if (current_state > 0 && !state) {
idle_inject_stop(ii_dev);
}
return 0;
}
/**
* cpuidle_cooling_ops - thermal cooling device ops
*/
static struct thermal_cooling_device_ops cpuidle_cooling_ops = {
.get_max_state = cpuidle_cooling_get_max_state,
.get_cur_state = cpuidle_cooling_get_cur_state,
.set_cur_state = cpuidle_cooling_set_cur_state,
};
/**
* __cpuidle_cooling_register: register the cooling device
* @drv: a cpuidle driver structure pointer
* @np: a device node structure pointer used for the thermal binding
*
* This function is in charge of allocating the cpuidle cooling device
* structure, the idle injection, initialize them and register the
* cooling device to the thermal framework.
*
* Return: zero on success, a negative value returned by one of the
* underlying subsystem in case of error
*/
static int __cpuidle_cooling_register(struct device_node *np,
struct cpuidle_driver *drv)
{
struct idle_inject_device *ii_dev;
struct cpuidle_cooling_device *idle_cdev;
struct thermal_cooling_device *cdev;
struct device *dev;
unsigned int idle_duration_us = TICK_USEC;
unsigned int latency_us = UINT_MAX;
char *name;
int ret;
idle_cdev = kzalloc(sizeof(*idle_cdev), GFP_KERNEL);
if (!idle_cdev) {
ret = -ENOMEM;
goto out;
}
ii_dev = idle_inject_register(drv->cpumask);
if (!ii_dev) {
ret = -EINVAL;
goto out_kfree;
}
of_property_read_u32(np, "duration-us", &idle_duration_us);
of_property_read_u32(np, "exit-latency-us", &latency_us);
idle_inject_set_duration(ii_dev, TICK_USEC, idle_duration_us);
idle_inject_set_latency(ii_dev, latency_us);
idle_cdev->ii_dev = ii_dev;
dev = get_cpu_device(cpumask_first(drv->cpumask));
name = kasprintf(GFP_KERNEL, "idle-%s", dev_name(dev));
if (!name) {
ret = -ENOMEM;
goto out_unregister;
}
cdev = thermal_of_cooling_device_register(np, name, idle_cdev,
&cpuidle_cooling_ops);
if (IS_ERR(cdev)) {
ret = PTR_ERR(cdev);
goto out_kfree_name;
}
pr_debug("%s: Idle injection set with idle duration=%u, latency=%u\n",
name, idle_duration_us, latency_us);
kfree(name);
return 0;
out_kfree_name:
kfree(name);
out_unregister:
idle_inject_unregister(ii_dev);
out_kfree:
kfree(idle_cdev);
out:
return ret;
}
/**
* cpuidle_cooling_register - Idle cooling device initialization function
* @drv: a cpuidle driver structure pointer
*
* This function is in charge of creating a cooling device per cpuidle
* driver and register it to the thermal framework.
*/
void cpuidle_cooling_register(struct cpuidle_driver *drv)
{
struct device_node *cooling_node;
struct device_node *cpu_node;
int cpu, ret;
for_each_cpu(cpu, drv->cpumask) {
cpu_node = of_cpu_device_node_get(cpu);
cooling_node = of_get_child_by_name(cpu_node, "thermal-idle");
of_node_put(cpu_node);
if (!cooling_node) {
pr_debug("'thermal-idle' node not found for cpu%d\n", cpu);
continue;
}
ret = __cpuidle_cooling_register(cooling_node, drv);
of_node_put(cooling_node);
if (ret) {
pr_err("Failed to register the cpuidle cooling device" \
"for cpu%d: %d\n", cpu, ret);
break;
}
}
}