linux/include/sound/hda_verbs.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

557 lines
17 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/*
* HD-audio codec verbs
*/
#ifndef __SOUND_HDA_VERBS_H
#define __SOUND_HDA_VERBS_H
/*
* nodes
*/
#define AC_NODE_ROOT 0x00
/*
* function group types
*/
enum {
AC_GRP_AUDIO_FUNCTION = 0x01,
AC_GRP_MODEM_FUNCTION = 0x02,
};
/*
* widget types
*/
enum {
AC_WID_AUD_OUT, /* Audio Out */
AC_WID_AUD_IN, /* Audio In */
AC_WID_AUD_MIX, /* Audio Mixer */
AC_WID_AUD_SEL, /* Audio Selector */
AC_WID_PIN, /* Pin Complex */
AC_WID_POWER, /* Power */
AC_WID_VOL_KNB, /* Volume Knob */
AC_WID_BEEP, /* Beep Generator */
AC_WID_VENDOR = 0x0f /* Vendor specific */
};
/*
* GET verbs
*/
#define AC_VERB_GET_STREAM_FORMAT 0x0a00
#define AC_VERB_GET_AMP_GAIN_MUTE 0x0b00
#define AC_VERB_GET_PROC_COEF 0x0c00
#define AC_VERB_GET_COEF_INDEX 0x0d00
#define AC_VERB_PARAMETERS 0x0f00
#define AC_VERB_GET_CONNECT_SEL 0x0f01
#define AC_VERB_GET_CONNECT_LIST 0x0f02
#define AC_VERB_GET_PROC_STATE 0x0f03
#define AC_VERB_GET_SDI_SELECT 0x0f04
#define AC_VERB_GET_POWER_STATE 0x0f05
#define AC_VERB_GET_CONV 0x0f06
#define AC_VERB_GET_PIN_WIDGET_CONTROL 0x0f07
#define AC_VERB_GET_UNSOLICITED_RESPONSE 0x0f08
#define AC_VERB_GET_PIN_SENSE 0x0f09
#define AC_VERB_GET_BEEP_CONTROL 0x0f0a
#define AC_VERB_GET_EAPD_BTLENABLE 0x0f0c
#define AC_VERB_GET_DIGI_CONVERT_1 0x0f0d
#define AC_VERB_GET_DIGI_CONVERT_2 0x0f0e /* unused */
#define AC_VERB_GET_VOLUME_KNOB_CONTROL 0x0f0f
/* f10-f1a: GPIO */
#define AC_VERB_GET_GPIO_DATA 0x0f15
#define AC_VERB_GET_GPIO_MASK 0x0f16
#define AC_VERB_GET_GPIO_DIRECTION 0x0f17
#define AC_VERB_GET_GPIO_WAKE_MASK 0x0f18
#define AC_VERB_GET_GPIO_UNSOLICITED_RSP_MASK 0x0f19
#define AC_VERB_GET_GPIO_STICKY_MASK 0x0f1a
#define AC_VERB_GET_CONFIG_DEFAULT 0x0f1c
/* f20: AFG/MFG */
#define AC_VERB_GET_SUBSYSTEM_ID 0x0f20
#define AC_VERB_GET_CVT_CHAN_COUNT 0x0f2d
#define AC_VERB_GET_HDMI_DIP_SIZE 0x0f2e
#define AC_VERB_GET_HDMI_ELDD 0x0f2f
#define AC_VERB_GET_HDMI_DIP_INDEX 0x0f30
#define AC_VERB_GET_HDMI_DIP_DATA 0x0f31
#define AC_VERB_GET_HDMI_DIP_XMIT 0x0f32
#define AC_VERB_GET_HDMI_CP_CTRL 0x0f33
#define AC_VERB_GET_HDMI_CHAN_SLOT 0x0f34
#define AC_VERB_GET_DEVICE_SEL 0xf35
#define AC_VERB_GET_DEVICE_LIST 0xf36
/*
* SET verbs
*/
#define AC_VERB_SET_STREAM_FORMAT 0x200
#define AC_VERB_SET_AMP_GAIN_MUTE 0x300
#define AC_VERB_SET_PROC_COEF 0x400
#define AC_VERB_SET_COEF_INDEX 0x500
#define AC_VERB_SET_CONNECT_SEL 0x701
#define AC_VERB_SET_PROC_STATE 0x703
#define AC_VERB_SET_SDI_SELECT 0x704
#define AC_VERB_SET_POWER_STATE 0x705
#define AC_VERB_SET_CHANNEL_STREAMID 0x706
#define AC_VERB_SET_PIN_WIDGET_CONTROL 0x707
#define AC_VERB_SET_UNSOLICITED_ENABLE 0x708
#define AC_VERB_SET_PIN_SENSE 0x709
#define AC_VERB_SET_BEEP_CONTROL 0x70a
#define AC_VERB_SET_EAPD_BTLENABLE 0x70c
#define AC_VERB_SET_DIGI_CONVERT_1 0x70d
#define AC_VERB_SET_DIGI_CONVERT_2 0x70e
#define AC_VERB_SET_DIGI_CONVERT_3 0x73e
#define AC_VERB_SET_VOLUME_KNOB_CONTROL 0x70f
#define AC_VERB_SET_GPIO_DATA 0x715
#define AC_VERB_SET_GPIO_MASK 0x716
#define AC_VERB_SET_GPIO_DIRECTION 0x717
#define AC_VERB_SET_GPIO_WAKE_MASK 0x718
#define AC_VERB_SET_GPIO_UNSOLICITED_RSP_MASK 0x719
#define AC_VERB_SET_GPIO_STICKY_MASK 0x71a
#define AC_VERB_SET_CONFIG_DEFAULT_BYTES_0 0x71c
#define AC_VERB_SET_CONFIG_DEFAULT_BYTES_1 0x71d
#define AC_VERB_SET_CONFIG_DEFAULT_BYTES_2 0x71e
#define AC_VERB_SET_CONFIG_DEFAULT_BYTES_3 0x71f
#define AC_VERB_SET_EAPD 0x788
#define AC_VERB_SET_CODEC_RESET 0x7ff
#define AC_VERB_SET_CVT_CHAN_COUNT 0x72d
#define AC_VERB_SET_HDMI_DIP_INDEX 0x730
#define AC_VERB_SET_HDMI_DIP_DATA 0x731
#define AC_VERB_SET_HDMI_DIP_XMIT 0x732
#define AC_VERB_SET_HDMI_CP_CTRL 0x733
#define AC_VERB_SET_HDMI_CHAN_SLOT 0x734
#define AC_VERB_SET_DEVICE_SEL 0x735
/*
* Parameter IDs
*/
#define AC_PAR_VENDOR_ID 0x00
#define AC_PAR_SUBSYSTEM_ID 0x01
#define AC_PAR_REV_ID 0x02
#define AC_PAR_NODE_COUNT 0x04
#define AC_PAR_FUNCTION_TYPE 0x05
#define AC_PAR_AUDIO_FG_CAP 0x08
#define AC_PAR_AUDIO_WIDGET_CAP 0x09
#define AC_PAR_PCM 0x0a
#define AC_PAR_STREAM 0x0b
#define AC_PAR_PIN_CAP 0x0c
#define AC_PAR_AMP_IN_CAP 0x0d
#define AC_PAR_CONNLIST_LEN 0x0e
#define AC_PAR_POWER_STATE 0x0f
#define AC_PAR_PROC_CAP 0x10
#define AC_PAR_GPIO_CAP 0x11
#define AC_PAR_AMP_OUT_CAP 0x12
#define AC_PAR_VOL_KNB_CAP 0x13
#define AC_PAR_DEVLIST_LEN 0x15
#define AC_PAR_HDMI_LPCM_CAP 0x20
/*
* AC_VERB_PARAMETERS results (32bit)
*/
/* Function Group Type */
#define AC_FGT_TYPE (0xff<<0)
#define AC_FGT_TYPE_SHIFT 0
#define AC_FGT_UNSOL_CAP (1<<8)
/* Audio Function Group Capabilities */
#define AC_AFG_OUT_DELAY (0xf<<0)
#define AC_AFG_IN_DELAY (0xf<<8)
#define AC_AFG_BEEP_GEN (1<<16)
/* Audio Widget Capabilities */
#define AC_WCAP_STEREO (1<<0) /* stereo I/O */
#define AC_WCAP_IN_AMP (1<<1) /* AMP-in present */
#define AC_WCAP_OUT_AMP (1<<2) /* AMP-out present */
#define AC_WCAP_AMP_OVRD (1<<3) /* AMP-parameter override */
#define AC_WCAP_FORMAT_OVRD (1<<4) /* format override */
#define AC_WCAP_STRIPE (1<<5) /* stripe */
#define AC_WCAP_PROC_WID (1<<6) /* Proc Widget */
#define AC_WCAP_UNSOL_CAP (1<<7) /* Unsol capable */
#define AC_WCAP_CONN_LIST (1<<8) /* connection list */
#define AC_WCAP_DIGITAL (1<<9) /* digital I/O */
#define AC_WCAP_POWER (1<<10) /* power control */
#define AC_WCAP_LR_SWAP (1<<11) /* L/R swap */
#define AC_WCAP_CP_CAPS (1<<12) /* content protection */
#define AC_WCAP_CHAN_CNT_EXT (7<<13) /* channel count ext */
#define AC_WCAP_DELAY (0xf<<16)
#define AC_WCAP_DELAY_SHIFT 16
#define AC_WCAP_TYPE (0xf<<20)
#define AC_WCAP_TYPE_SHIFT 20
/* supported PCM rates and bits */
#define AC_SUPPCM_RATES (0xfff << 0)
#define AC_SUPPCM_BITS_8 (1<<16)
#define AC_SUPPCM_BITS_16 (1<<17)
#define AC_SUPPCM_BITS_20 (1<<18)
#define AC_SUPPCM_BITS_24 (1<<19)
#define AC_SUPPCM_BITS_32 (1<<20)
/* supported PCM stream format */
#define AC_SUPFMT_PCM (1<<0)
#define AC_SUPFMT_FLOAT32 (1<<1)
#define AC_SUPFMT_AC3 (1<<2)
/* GP I/O count */
#define AC_GPIO_IO_COUNT (0xff<<0)
#define AC_GPIO_O_COUNT (0xff<<8)
#define AC_GPIO_O_COUNT_SHIFT 8
#define AC_GPIO_I_COUNT (0xff<<16)
#define AC_GPIO_I_COUNT_SHIFT 16
#define AC_GPIO_UNSOLICITED (1<<30)
#define AC_GPIO_WAKE (1<<31)
/* Converter stream, channel */
#define AC_CONV_CHANNEL (0xf<<0)
#define AC_CONV_STREAM (0xf<<4)
#define AC_CONV_STREAM_SHIFT 4
/* Input converter SDI select */
#define AC_SDI_SELECT (0xf<<0)
/* stream format id */
#define AC_FMT_CHAN_SHIFT 0
#define AC_FMT_CHAN_MASK (0x0f << 0)
#define AC_FMT_BITS_SHIFT 4
#define AC_FMT_BITS_MASK (7 << 4)
#define AC_FMT_BITS_8 (0 << 4)
#define AC_FMT_BITS_16 (1 << 4)
#define AC_FMT_BITS_20 (2 << 4)
#define AC_FMT_BITS_24 (3 << 4)
#define AC_FMT_BITS_32 (4 << 4)
#define AC_FMT_DIV_SHIFT 8
#define AC_FMT_DIV_MASK (7 << 8)
#define AC_FMT_MULT_SHIFT 11
#define AC_FMT_MULT_MASK (7 << 11)
#define AC_FMT_BASE_SHIFT 14
#define AC_FMT_BASE_48K (0 << 14)
#define AC_FMT_BASE_44K (1 << 14)
#define AC_FMT_TYPE_SHIFT 15
#define AC_FMT_TYPE_PCM (0 << 15)
#define AC_FMT_TYPE_NON_PCM (1 << 15)
/* Unsolicited response control */
#define AC_UNSOL_TAG (0x3f<<0)
#define AC_UNSOL_ENABLED (1<<7)
#define AC_USRSP_EN AC_UNSOL_ENABLED
/* Unsolicited responses */
#define AC_UNSOL_RES_TAG (0x3f<<26)
#define AC_UNSOL_RES_TAG_SHIFT 26
#define AC_UNSOL_RES_SUBTAG (0x1f<<21)
#define AC_UNSOL_RES_SUBTAG_SHIFT 21
#define AC_UNSOL_RES_DE (0x3f<<15) /* Device Entry
* (for DP1.2 MST)
*/
#define AC_UNSOL_RES_DE_SHIFT 15
#define AC_UNSOL_RES_IA (1<<2) /* Inactive (for DP1.2 MST) */
#define AC_UNSOL_RES_ELDV (1<<1) /* ELD Data valid (for HDMI) */
#define AC_UNSOL_RES_PD (1<<0) /* pinsense detect */
#define AC_UNSOL_RES_CP_STATE (1<<1) /* content protection */
#define AC_UNSOL_RES_CP_READY (1<<0) /* content protection */
/* Pin widget capabilies */
#define AC_PINCAP_IMP_SENSE (1<<0) /* impedance sense capable */
#define AC_PINCAP_TRIG_REQ (1<<1) /* trigger required */
#define AC_PINCAP_PRES_DETECT (1<<2) /* presence detect capable */
#define AC_PINCAP_HP_DRV (1<<3) /* headphone drive capable */
#define AC_PINCAP_OUT (1<<4) /* output capable */
#define AC_PINCAP_IN (1<<5) /* input capable */
#define AC_PINCAP_BALANCE (1<<6) /* balanced I/O capable */
/* Note: This LR_SWAP pincap is defined in the Realtek ALC883 specification,
* but is marked reserved in the Intel HDA specification.
*/
#define AC_PINCAP_LR_SWAP (1<<7) /* L/R swap */
/* Note: The same bit as LR_SWAP is newly defined as HDMI capability
* in HD-audio specification
*/
#define AC_PINCAP_HDMI (1<<7) /* HDMI pin */
#define AC_PINCAP_DP (1<<24) /* DisplayPort pin, can
* coexist with AC_PINCAP_HDMI
*/
#define AC_PINCAP_VREF (0x37<<8)
#define AC_PINCAP_VREF_SHIFT 8
#define AC_PINCAP_EAPD (1<<16) /* EAPD capable */
#define AC_PINCAP_HBR (1<<27) /* High Bit Rate */
/* Vref status (used in pin cap) */
#define AC_PINCAP_VREF_HIZ (1<<0) /* Hi-Z */
#define AC_PINCAP_VREF_50 (1<<1) /* 50% */
#define AC_PINCAP_VREF_GRD (1<<2) /* ground */
#define AC_PINCAP_VREF_80 (1<<4) /* 80% */
#define AC_PINCAP_VREF_100 (1<<5) /* 100% */
/* Amplifier capabilities */
#define AC_AMPCAP_OFFSET (0x7f<<0) /* 0dB offset */
#define AC_AMPCAP_OFFSET_SHIFT 0
#define AC_AMPCAP_NUM_STEPS (0x7f<<8) /* number of steps */
#define AC_AMPCAP_NUM_STEPS_SHIFT 8
#define AC_AMPCAP_STEP_SIZE (0x7f<<16) /* step size 0-32dB
* in 0.25dB
*/
#define AC_AMPCAP_STEP_SIZE_SHIFT 16
#define AC_AMPCAP_MUTE (1<<31) /* mute capable */
#define AC_AMPCAP_MUTE_SHIFT 31
/* driver-specific amp-caps: using bits 24-30 */
#define AC_AMPCAP_MIN_MUTE (1 << 30) /* min-volume = mute */
/* Connection list */
#define AC_CLIST_LENGTH (0x7f<<0)
#define AC_CLIST_LONG (1<<7)
/* Supported power status */
#define AC_PWRST_D0SUP (1<<0)
#define AC_PWRST_D1SUP (1<<1)
#define AC_PWRST_D2SUP (1<<2)
#define AC_PWRST_D3SUP (1<<3)
#define AC_PWRST_D3COLDSUP (1<<4)
#define AC_PWRST_S3D3COLDSUP (1<<29)
#define AC_PWRST_CLKSTOP (1<<30)
#define AC_PWRST_EPSS (1U<<31)
/* Power state values */
#define AC_PWRST_SETTING (0xf<<0)
#define AC_PWRST_ACTUAL (0xf<<4)
#define AC_PWRST_ACTUAL_SHIFT 4
#define AC_PWRST_D0 0x00
#define AC_PWRST_D1 0x01
#define AC_PWRST_D2 0x02
#define AC_PWRST_D3 0x03
#define AC_PWRST_ERROR (1<<8)
#define AC_PWRST_CLK_STOP_OK (1<<9)
#define AC_PWRST_SETTING_RESET (1<<10)
/* Processing capabilies */
#define AC_PCAP_BENIGN (1<<0)
#define AC_PCAP_NUM_COEF (0xff<<8)
#define AC_PCAP_NUM_COEF_SHIFT 8
/* Volume knobs capabilities */
#define AC_KNBCAP_NUM_STEPS (0x7f<<0)
#define AC_KNBCAP_DELTA (1<<7)
/* HDMI LPCM capabilities */
#define AC_LPCMCAP_48K_CP_CHNS (0x0f<<0) /* max channels w/ CP-on */
#define AC_LPCMCAP_48K_NO_CHNS (0x0f<<4) /* max channels w/o CP-on */
#define AC_LPCMCAP_48K_20BIT (1<<8) /* 20b bitrate supported */
#define AC_LPCMCAP_48K_24BIT (1<<9) /* 24b bitrate supported */
#define AC_LPCMCAP_96K_CP_CHNS (0x0f<<10) /* max channels w/ CP-on */
#define AC_LPCMCAP_96K_NO_CHNS (0x0f<<14) /* max channels w/o CP-on */
#define AC_LPCMCAP_96K_20BIT (1<<18) /* 20b bitrate supported */
#define AC_LPCMCAP_96K_24BIT (1<<19) /* 24b bitrate supported */
#define AC_LPCMCAP_192K_CP_CHNS (0x0f<<20) /* max channels w/ CP-on */
#define AC_LPCMCAP_192K_NO_CHNS (0x0f<<24) /* max channels w/o CP-on */
#define AC_LPCMCAP_192K_20BIT (1<<28) /* 20b bitrate supported */
#define AC_LPCMCAP_192K_24BIT (1<<29) /* 24b bitrate supported */
#define AC_LPCMCAP_44K (1<<30) /* 44.1kHz support */
#define AC_LPCMCAP_44K_MS (1<<31) /* 44.1kHz-multiplies support */
/* Display pin's device list length */
#define AC_DEV_LIST_LEN_MASK 0x3f
#define AC_MAX_DEV_LIST_LEN 64
/*
* Control Parameters
*/
/* Amp gain/mute */
#define AC_AMP_MUTE (1<<7)
#define AC_AMP_GAIN (0x7f)
#define AC_AMP_GET_INDEX (0xf<<0)
#define AC_AMP_GET_LEFT (1<<13)
#define AC_AMP_GET_RIGHT (0<<13)
#define AC_AMP_GET_OUTPUT (1<<15)
#define AC_AMP_GET_INPUT (0<<15)
#define AC_AMP_SET_INDEX (0xf<<8)
#define AC_AMP_SET_INDEX_SHIFT 8
#define AC_AMP_SET_RIGHT (1<<12)
#define AC_AMP_SET_LEFT (1<<13)
#define AC_AMP_SET_INPUT (1<<14)
#define AC_AMP_SET_OUTPUT (1<<15)
/* DIGITAL1 bits */
#define AC_DIG1_ENABLE (1<<0)
#define AC_DIG1_V (1<<1)
#define AC_DIG1_VCFG (1<<2)
#define AC_DIG1_EMPHASIS (1<<3)
#define AC_DIG1_COPYRIGHT (1<<4)
#define AC_DIG1_NONAUDIO (1<<5)
#define AC_DIG1_PROFESSIONAL (1<<6)
#define AC_DIG1_LEVEL (1<<7)
/* DIGITAL2 bits */
#define AC_DIG2_CC (0x7f<<0)
/* DIGITAL3 bits */
#define AC_DIG3_ICT (0xf<<0)
#define AC_DIG3_KAE (1<<7)
/* Pin widget control - 8bit */
#define AC_PINCTL_EPT (0x3<<0)
#define AC_PINCTL_EPT_NATIVE 0
#define AC_PINCTL_EPT_HBR 3
#define AC_PINCTL_VREFEN (0x7<<0)
#define AC_PINCTL_VREF_HIZ 0 /* Hi-Z */
#define AC_PINCTL_VREF_50 1 /* 50% */
#define AC_PINCTL_VREF_GRD 2 /* ground */
#define AC_PINCTL_VREF_80 4 /* 80% */
#define AC_PINCTL_VREF_100 5 /* 100% */
#define AC_PINCTL_IN_EN (1<<5)
#define AC_PINCTL_OUT_EN (1<<6)
#define AC_PINCTL_HP_EN (1<<7)
/* Pin sense - 32bit */
#define AC_PINSENSE_IMPEDANCE_MASK (0x7fffffff)
#define AC_PINSENSE_PRESENCE (1<<31)
#define AC_PINSENSE_ELDV (1<<30) /* ELD valid (HDMI) */
/* EAPD/BTL enable - 32bit */
#define AC_EAPDBTL_BALANCED (1<<0)
#define AC_EAPDBTL_EAPD (1<<1)
#define AC_EAPDBTL_LR_SWAP (1<<2)
/* HDMI ELD data */
#define AC_ELDD_ELD_VALID (1<<31)
#define AC_ELDD_ELD_DATA 0xff
/* HDMI DIP size */
#define AC_DIPSIZE_ELD_BUF (1<<3) /* ELD buf size of packet size */
#define AC_DIPSIZE_PACK_IDX (0x07<<0) /* packet index */
/* HDMI DIP index */
#define AC_DIPIDX_PACK_IDX (0x07<<5) /* packet idnex */
#define AC_DIPIDX_BYTE_IDX (0x1f<<0) /* byte index */
/* HDMI DIP xmit (transmit) control */
#define AC_DIPXMIT_MASK (0x3<<6)
#define AC_DIPXMIT_DISABLE (0x0<<6) /* disable xmit */
#define AC_DIPXMIT_ONCE (0x2<<6) /* xmit once then disable */
#define AC_DIPXMIT_BEST (0x3<<6) /* best effort */
/* HDMI content protection (CP) control */
#define AC_CPCTRL_CES (1<<9) /* current encryption state */
#define AC_CPCTRL_READY (1<<8) /* ready bit */
#define AC_CPCTRL_SUBTAG (0x1f<<3) /* subtag for unsol-resp */
#define AC_CPCTRL_STATE (3<<0) /* current CP request state */
/* Converter channel <-> HDMI slot mapping */
#define AC_CVTMAP_HDMI_SLOT (0xf<<0) /* HDMI slot number */
#define AC_CVTMAP_CHAN (0xf<<4) /* converter channel number */
/* configuration default - 32bit */
#define AC_DEFCFG_SEQUENCE (0xf<<0)
#define AC_DEFCFG_DEF_ASSOC (0xf<<4)
#define AC_DEFCFG_ASSOC_SHIFT 4
#define AC_DEFCFG_MISC (0xf<<8)
#define AC_DEFCFG_MISC_SHIFT 8
#define AC_DEFCFG_MISC_NO_PRESENCE (1<<0)
#define AC_DEFCFG_COLOR (0xf<<12)
#define AC_DEFCFG_COLOR_SHIFT 12
#define AC_DEFCFG_CONN_TYPE (0xf<<16)
#define AC_DEFCFG_CONN_TYPE_SHIFT 16
#define AC_DEFCFG_DEVICE (0xf<<20)
#define AC_DEFCFG_DEVICE_SHIFT 20
#define AC_DEFCFG_LOCATION (0x3f<<24)
#define AC_DEFCFG_LOCATION_SHIFT 24
#define AC_DEFCFG_PORT_CONN (0x3<<30)
#define AC_DEFCFG_PORT_CONN_SHIFT 30
/* Display pin's device list entry */
#define AC_DE_PD (1<<0)
#define AC_DE_ELDV (1<<1)
#define AC_DE_IA (1<<2)
/* device device types (0x0-0xf) */
enum {
AC_JACK_LINE_OUT,
AC_JACK_SPEAKER,
AC_JACK_HP_OUT,
AC_JACK_CD,
AC_JACK_SPDIF_OUT,
AC_JACK_DIG_OTHER_OUT,
AC_JACK_MODEM_LINE_SIDE,
AC_JACK_MODEM_HAND_SIDE,
AC_JACK_LINE_IN,
AC_JACK_AUX,
AC_JACK_MIC_IN,
AC_JACK_TELEPHONY,
AC_JACK_SPDIF_IN,
AC_JACK_DIG_OTHER_IN,
AC_JACK_OTHER = 0xf,
};
/* jack connection types (0x0-0xf) */
enum {
AC_JACK_CONN_UNKNOWN,
AC_JACK_CONN_1_8,
AC_JACK_CONN_1_4,
AC_JACK_CONN_ATAPI,
AC_JACK_CONN_RCA,
AC_JACK_CONN_OPTICAL,
AC_JACK_CONN_OTHER_DIGITAL,
AC_JACK_CONN_OTHER_ANALOG,
AC_JACK_CONN_DIN,
AC_JACK_CONN_XLR,
AC_JACK_CONN_RJ11,
AC_JACK_CONN_COMB,
AC_JACK_CONN_OTHER = 0xf,
};
/* jack colors (0x0-0xf) */
enum {
AC_JACK_COLOR_UNKNOWN,
AC_JACK_COLOR_BLACK,
AC_JACK_COLOR_GREY,
AC_JACK_COLOR_BLUE,
AC_JACK_COLOR_GREEN,
AC_JACK_COLOR_RED,
AC_JACK_COLOR_ORANGE,
AC_JACK_COLOR_YELLOW,
AC_JACK_COLOR_PURPLE,
AC_JACK_COLOR_PINK,
AC_JACK_COLOR_WHITE = 0xe,
AC_JACK_COLOR_OTHER,
};
/* Jack location (0x0-0x3f) */
/* common case */
enum {
AC_JACK_LOC_NONE,
AC_JACK_LOC_REAR,
AC_JACK_LOC_FRONT,
AC_JACK_LOC_LEFT,
AC_JACK_LOC_RIGHT,
AC_JACK_LOC_TOP,
AC_JACK_LOC_BOTTOM,
};
/* bits 4-5 */
enum {
AC_JACK_LOC_EXTERNAL = 0x00,
AC_JACK_LOC_INTERNAL = 0x10,
AC_JACK_LOC_SEPARATE = 0x20,
AC_JACK_LOC_OTHER = 0x30,
};
enum {
/* external on primary chasis */
AC_JACK_LOC_REAR_PANEL = 0x07,
AC_JACK_LOC_DRIVE_BAY,
/* internal */
AC_JACK_LOC_RISER = 0x17,
AC_JACK_LOC_HDMI,
AC_JACK_LOC_ATAPI,
/* others */
AC_JACK_LOC_MOBILE_IN = 0x37,
AC_JACK_LOC_MOBILE_OUT,
};
/* Port connectivity (0-3) */
enum {
AC_JACK_PORT_COMPLEX,
AC_JACK_PORT_NONE,
AC_JACK_PORT_FIXED,
AC_JACK_PORT_BOTH,
};
/* max. codec address */
#define HDA_MAX_CODEC_ADDRESS 0x0f
#endif /* __SOUND_HDA_VERBS_H */