linux/arch/arm/boot/dts/imx28-cfa10036.dts
Maxime Ripard 25d6dd859e ARM: dts: mxs: add oled support for the cfa-10036
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Brian Lilly <brian@crystalfontz.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-22 09:03:40 +08:00

99 lines
1.9 KiB
Plaintext

/*
* Copyright 2012 Free Electrons
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
/include/ "imx28.dtsi"
/ {
model = "Crystalfontz CFA-10036 Board";
compatible = "crystalfontz,cfa10036", "fsl,imx28";
memory {
reg = <0x40000000 0x08000000>;
};
apb@80000000 {
apbh@80000000 {
pinctrl@80018000 {
pinctrl-names = "default";
pinctrl-0 = <&hog_pins_cfa10036>;
hog_pins_cfa10036: hog-10036@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2073 /* MX28_PAD_SSP0_D7__GPIO_2_7 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
led_pins_cfa10036: leds-10036@0 {
reg = <0>;
fsl,pinmux-ids = <
0x3043 /* MX28_PAD_AUART1_RX__GPIO_3_4 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
};
ssp0: ssp@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a
&mmc0_cd_cfg &mmc0_sck_cfg>;
bus-width = <4>;
status = "okay";
};
};
apbx@80040000 {
pwm: pwm@80064000 {
pinctrl-names = "default";
pinctrl-0 = <&pwm4_pins_a>;
status = "okay";
};
duart: serial@80074000 {
pinctrl-names = "default";
pinctrl-0 = <&duart_pins_b>;
status = "okay";
};
i2c0: i2c@80058000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_b>;
status = "okay";
ssd1307: oled@3c {
compatible = "solomon,ssd1307fb-i2c";
reg = <0x3c>;
pwms = <&pwm 4 3000>;
reset-gpios = <&gpio2 7 0>;
};
};
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins_cfa10036>;
power {
gpios = <&gpio3 4 1>;
default-state = "on";
};
};
};