linux/drivers/ata/pata_pxa.c
Robert Jarzmik 273340e8bf ata: pata_pxa: remove the dmaengine compat need
As the pxa architecture switched towards the dmaengine slave map, the
old compatibility mechanism to acquire the dma requestor line number and
priority are not needed anymore.

This patch simplifies the dma resource acquisition, using the more
generic function dma_request_slave_channel().

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-06-18 21:32:07 +02:00

337 lines
8.5 KiB
C

/*
* Generic PXA PATA driver
*
* Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/blkdev.h>
#include <linux/ata.h>
#include <linux/libata.h>
#include <linux/platform_device.h>
#include <linux/dmaengine.h>
#include <linux/gpio.h>
#include <linux/slab.h>
#include <linux/completion.h>
#include <scsi/scsi_host.h>
#include <linux/platform_data/ata-pxa.h>
#define DRV_NAME "pata_pxa"
#define DRV_VERSION "0.1"
struct pata_pxa_data {
struct dma_chan *dma_chan;
dma_cookie_t dma_cookie;
struct completion dma_done;
};
/*
* DMA interrupt handler.
*/
static void pxa_ata_dma_irq(void *d)
{
struct pata_pxa_data *pd = d;
enum dma_status status;
status = dmaengine_tx_status(pd->dma_chan, pd->dma_cookie, NULL);
if (status == DMA_ERROR || status == DMA_COMPLETE)
complete(&pd->dma_done);
}
/*
* Prepare taskfile for submission.
*/
static void pxa_qc_prep(struct ata_queued_cmd *qc)
{
struct pata_pxa_data *pd = qc->ap->private_data;
struct dma_async_tx_descriptor *tx;
enum dma_transfer_direction dir;
if (!(qc->flags & ATA_QCFLAG_DMAMAP))
return;
dir = (qc->dma_dir == DMA_TO_DEVICE ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM);
tx = dmaengine_prep_slave_sg(pd->dma_chan, qc->sg, qc->n_elem, dir,
DMA_PREP_INTERRUPT);
if (!tx) {
ata_dev_err(qc->dev, "prep_slave_sg() failed\n");
return;
}
tx->callback = pxa_ata_dma_irq;
tx->callback_param = pd;
pd->dma_cookie = dmaengine_submit(tx);
}
/*
* Configure the DMA controller, load the DMA descriptors, but don't start the
* DMA controller yet. Only issue the ATA command.
*/
static void pxa_bmdma_setup(struct ata_queued_cmd *qc)
{
qc->ap->ops->sff_exec_command(qc->ap, &qc->tf);
}
/*
* Execute the DMA transfer.
*/
static void pxa_bmdma_start(struct ata_queued_cmd *qc)
{
struct pata_pxa_data *pd = qc->ap->private_data;
init_completion(&pd->dma_done);
dma_async_issue_pending(pd->dma_chan);
}
/*
* Wait until the DMA transfer completes, then stop the DMA controller.
*/
static void pxa_bmdma_stop(struct ata_queued_cmd *qc)
{
struct pata_pxa_data *pd = qc->ap->private_data;
enum dma_status status;
status = dmaengine_tx_status(pd->dma_chan, pd->dma_cookie, NULL);
if (status != DMA_ERROR && status != DMA_COMPLETE &&
wait_for_completion_timeout(&pd->dma_done, HZ))
ata_dev_err(qc->dev, "Timeout waiting for DMA completion!");
dmaengine_terminate_all(pd->dma_chan);
}
/*
* Read DMA status. The bmdma_stop() will take care of properly finishing the
* DMA transfer so we always have DMA-complete interrupt here.
*/
static unsigned char pxa_bmdma_status(struct ata_port *ap)
{
struct pata_pxa_data *pd = ap->private_data;
unsigned char ret = ATA_DMA_INTR;
struct dma_tx_state state;
enum dma_status status;
status = dmaengine_tx_status(pd->dma_chan, pd->dma_cookie, &state);
if (status != DMA_COMPLETE)
ret |= ATA_DMA_ERR;
return ret;
}
/*
* No IRQ register present so we do nothing.
*/
static void pxa_irq_clear(struct ata_port *ap)
{
}
/*
* Check for ATAPI DMA. ATAPI DMA is unsupported by this driver. It's still
* unclear why ATAPI has DMA issues.
*/
static int pxa_check_atapi_dma(struct ata_queued_cmd *qc)
{
return -EOPNOTSUPP;
}
static struct scsi_host_template pxa_ata_sht = {
ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations pxa_ata_port_ops = {
.inherits = &ata_bmdma_port_ops,
.cable_detect = ata_cable_40wire,
.bmdma_setup = pxa_bmdma_setup,
.bmdma_start = pxa_bmdma_start,
.bmdma_stop = pxa_bmdma_stop,
.bmdma_status = pxa_bmdma_status,
.check_atapi_dma = pxa_check_atapi_dma,
.sff_irq_clear = pxa_irq_clear,
.qc_prep = pxa_qc_prep,
};
static int pxa_ata_probe(struct platform_device *pdev)
{
struct ata_host *host;
struct ata_port *ap;
struct pata_pxa_data *data;
struct resource *cmd_res;
struct resource *ctl_res;
struct resource *dma_res;
struct resource *irq_res;
struct pata_pxa_pdata *pdata = dev_get_platdata(&pdev->dev);
struct dma_slave_config config;
int ret = 0;
/*
* Resource validation, three resources are needed:
* - CMD port base address
* - CTL port base address
* - DMA port base address
* - IRQ pin
*/
if (pdev->num_resources != 4) {
dev_err(&pdev->dev, "invalid number of resources\n");
return -EINVAL;
}
/*
* CMD port base address
*/
cmd_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (unlikely(cmd_res == NULL))
return -EINVAL;
/*
* CTL port base address
*/
ctl_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
if (unlikely(ctl_res == NULL))
return -EINVAL;
/*
* DMA port base address
*/
dma_res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
if (unlikely(dma_res == NULL))
return -EINVAL;
/*
* IRQ pin
*/
irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (unlikely(irq_res == NULL))
return -EINVAL;
/*
* Allocate the host
*/
host = ata_host_alloc(&pdev->dev, 1);
if (!host)
return -ENOMEM;
ap = host->ports[0];
ap->ops = &pxa_ata_port_ops;
ap->pio_mask = ATA_PIO4;
ap->mwdma_mask = ATA_MWDMA2;
ap->ioaddr.cmd_addr = devm_ioremap(&pdev->dev, cmd_res->start,
resource_size(cmd_res));
ap->ioaddr.ctl_addr = devm_ioremap(&pdev->dev, ctl_res->start,
resource_size(ctl_res));
ap->ioaddr.bmdma_addr = devm_ioremap(&pdev->dev, dma_res->start,
resource_size(dma_res));
/*
* Adjust register offsets
*/
ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
ap->ioaddr.data_addr = ap->ioaddr.cmd_addr +
(ATA_REG_DATA << pdata->reg_shift);
ap->ioaddr.error_addr = ap->ioaddr.cmd_addr +
(ATA_REG_ERR << pdata->reg_shift);
ap->ioaddr.feature_addr = ap->ioaddr.cmd_addr +
(ATA_REG_FEATURE << pdata->reg_shift);
ap->ioaddr.nsect_addr = ap->ioaddr.cmd_addr +
(ATA_REG_NSECT << pdata->reg_shift);
ap->ioaddr.lbal_addr = ap->ioaddr.cmd_addr +
(ATA_REG_LBAL << pdata->reg_shift);
ap->ioaddr.lbam_addr = ap->ioaddr.cmd_addr +
(ATA_REG_LBAM << pdata->reg_shift);
ap->ioaddr.lbah_addr = ap->ioaddr.cmd_addr +
(ATA_REG_LBAH << pdata->reg_shift);
ap->ioaddr.device_addr = ap->ioaddr.cmd_addr +
(ATA_REG_DEVICE << pdata->reg_shift);
ap->ioaddr.status_addr = ap->ioaddr.cmd_addr +
(ATA_REG_STATUS << pdata->reg_shift);
ap->ioaddr.command_addr = ap->ioaddr.cmd_addr +
(ATA_REG_CMD << pdata->reg_shift);
/*
* Allocate and load driver's internal data structure
*/
data = devm_kzalloc(&pdev->dev, sizeof(struct pata_pxa_data),
GFP_KERNEL);
if (!data)
return -ENOMEM;
ap->private_data = data;
memset(&config, 0, sizeof(config));
config.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
config.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
config.src_addr = dma_res->start;
config.dst_addr = dma_res->start;
config.src_maxburst = 32;
config.dst_maxburst = 32;
/*
* Request the DMA channel
*/
data->dma_chan =
dma_request_slave_channel(&pdev->dev, "data");
if (!data->dma_chan)
return -EBUSY;
ret = dmaengine_slave_config(data->dma_chan, &config);
if (ret < 0) {
dev_err(&pdev->dev, "dma configuration failed: %d\n", ret);
return ret;
}
/*
* Activate the ATA host
*/
ret = ata_host_activate(host, irq_res->start, ata_sff_interrupt,
pdata->irq_flags, &pxa_ata_sht);
if (ret)
dma_release_channel(data->dma_chan);
return ret;
}
static int pxa_ata_remove(struct platform_device *pdev)
{
struct ata_host *host = platform_get_drvdata(pdev);
struct pata_pxa_data *data = host->ports[0]->private_data;
dma_release_channel(data->dma_chan);
ata_host_detach(host);
return 0;
}
static struct platform_driver pxa_ata_driver = {
.probe = pxa_ata_probe,
.remove = pxa_ata_remove,
.driver = {
.name = DRV_NAME,
},
};
module_platform_driver(pxa_ata_driver);
MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
MODULE_DESCRIPTION("DMA-capable driver for PATA on PXA CPU");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
MODULE_ALIAS("platform:" DRV_NAME);