linux/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
Giuseppe CAVALLARO 22407e1317 stmmac: dwmac-sti: fix st,tx-retime-src check
In case of the st,tx-retime-src is missing from device-tree
(it's an optional field) the driver will invoke the strcasecmp to check
which clock has been selected and this is a bug; the else condition
is needed.

In the dwmac_setup, the "rs" variable, passed to the strcasecmp, was not
initialized and the compiler, depending on the options adopted, could
take it in some different part of the stack generating the hang in such
configuration.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-30 14:52:51 -05:00

402 lines
11 KiB
C

/*
* dwmac-sti.c - STMicroelectronics DWMAC Specific Glue layer
*
* Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited
* Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
* Contributors: Giuseppe Cavallaro <peppe.cavallaro@st.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/stmmac.h>
#include <linux/phy.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/clk.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_net.h>
#include "stmmac_platform.h"
#define DWMAC_125MHZ 125000000
#define DWMAC_50MHZ 50000000
#define DWMAC_25MHZ 25000000
#define DWMAC_2_5MHZ 2500000
#define IS_PHY_IF_MODE_RGMII(iface) (iface == PHY_INTERFACE_MODE_RGMII || \
iface == PHY_INTERFACE_MODE_RGMII_ID || \
iface == PHY_INTERFACE_MODE_RGMII_RXID || \
iface == PHY_INTERFACE_MODE_RGMII_TXID)
#define IS_PHY_IF_MODE_GBIT(iface) (IS_PHY_IF_MODE_RGMII(iface) || \
iface == PHY_INTERFACE_MODE_GMII)
/* STiH4xx register definitions (STiH415/STiH416/STiH407/STiH410 families)
*
* Below table summarizes the clock requirement and clock sources for
* supported phy interface modes with link speeds.
* ________________________________________________
*| PHY_MODE | 1000 Mbit Link | 100 Mbit Link |
* ------------------------------------------------
*| MII | n/a | 25Mhz |
*| | | txclk |
* ------------------------------------------------
*| GMII | 125Mhz | 25Mhz |
*| | clk-125/txclk | txclk |
* ------------------------------------------------
*| RGMII | 125Mhz | 25Mhz |
*| | clk-125/txclk | clkgen |
*| | clkgen | |
* ------------------------------------------------
*| RMII | n/a | 25Mhz |
*| | |clkgen/phyclk-in |
* ------------------------------------------------
*
* Register Configuration
*-------------------------------
* src |BIT(8)| BIT(7)| BIT(6)|
*-------------------------------
* txclk | 0 | n/a | 1 |
*-------------------------------
* ck_125| 0 | n/a | 0 |
*-------------------------------
* phyclk| 1 | 0 | n/a |
*-------------------------------
* clkgen| 1 | 1 | n/a |
*-------------------------------
*/
#define STIH4XX_RETIME_SRC_MASK GENMASK(8, 6)
#define STIH4XX_ETH_SEL_TX_RETIME_CLK BIT(8)
#define STIH4XX_ETH_SEL_INTERNAL_NOTEXT_PHYCLK BIT(7)
#define STIH4XX_ETH_SEL_TXCLK_NOT_CLK125 BIT(6)
/* STiD127 register definitions
*-----------------------
* src |BIT(6)| BIT(7)|
*-----------------------
* MII | 1 | n/a |
*-----------------------
* RMII | n/a | 1 |
* clkgen| | |
*-----------------------
* RMII | n/a | 0 |
* phyclk| | |
*-----------------------
* RGMII | 1 | n/a |
* clkgen| | |
*-----------------------
*/
#define STID127_RETIME_SRC_MASK GENMASK(7, 6)
#define STID127_ETH_SEL_INTERNAL_NOTEXT_PHYCLK BIT(7)
#define STID127_ETH_SEL_INTERNAL_NOTEXT_TXCLK BIT(6)
#define ENMII_MASK GENMASK(5, 5)
#define ENMII BIT(5)
#define EN_MASK GENMASK(1, 1)
#define EN BIT(1)
/*
* 3 bits [4:2]
* 000-GMII/MII
* 001-RGMII
* 010-SGMII
* 100-RMII
*/
#define MII_PHY_SEL_MASK GENMASK(4, 2)
#define ETH_PHY_SEL_RMII BIT(4)
#define ETH_PHY_SEL_SGMII BIT(3)
#define ETH_PHY_SEL_RGMII BIT(2)
#define ETH_PHY_SEL_GMII 0x0
#define ETH_PHY_SEL_MII 0x0
struct sti_dwmac {
int interface; /* MII interface */
bool ext_phyclk; /* Clock from external PHY */
u32 tx_retime_src; /* TXCLK Retiming*/
struct clk *clk; /* PHY clock */
u32 ctrl_reg; /* GMAC glue-logic control register */
int clk_sel_reg; /* GMAC ext clk selection register */
struct device *dev;
struct regmap *regmap;
u32 speed;
void (*fix_retime_src)(void *priv, unsigned int speed);
};
struct sti_dwmac_of_data {
void (*fix_retime_src)(void *priv, unsigned int speed);
};
static u32 phy_intf_sels[] = {
[PHY_INTERFACE_MODE_MII] = ETH_PHY_SEL_MII,
[PHY_INTERFACE_MODE_GMII] = ETH_PHY_SEL_GMII,
[PHY_INTERFACE_MODE_RGMII] = ETH_PHY_SEL_RGMII,
[PHY_INTERFACE_MODE_RGMII_ID] = ETH_PHY_SEL_RGMII,
[PHY_INTERFACE_MODE_SGMII] = ETH_PHY_SEL_SGMII,
[PHY_INTERFACE_MODE_RMII] = ETH_PHY_SEL_RMII,
};
enum {
TX_RETIME_SRC_NA = 0,
TX_RETIME_SRC_TXCLK = 1,
TX_RETIME_SRC_CLK_125,
TX_RETIME_SRC_PHYCLK,
TX_RETIME_SRC_CLKGEN,
};
static u32 stih4xx_tx_retime_val[] = {
[TX_RETIME_SRC_TXCLK] = STIH4XX_ETH_SEL_TXCLK_NOT_CLK125,
[TX_RETIME_SRC_CLK_125] = 0x0,
[TX_RETIME_SRC_PHYCLK] = STIH4XX_ETH_SEL_TX_RETIME_CLK,
[TX_RETIME_SRC_CLKGEN] = STIH4XX_ETH_SEL_TX_RETIME_CLK
| STIH4XX_ETH_SEL_INTERNAL_NOTEXT_PHYCLK,
};
static void stih4xx_fix_retime_src(void *priv, u32 spd)
{
struct sti_dwmac *dwmac = priv;
u32 src = dwmac->tx_retime_src;
u32 reg = dwmac->ctrl_reg;
u32 freq = 0;
if (dwmac->interface == PHY_INTERFACE_MODE_MII) {
src = TX_RETIME_SRC_TXCLK;
} else if (dwmac->interface == PHY_INTERFACE_MODE_RMII) {
if (dwmac->ext_phyclk) {
src = TX_RETIME_SRC_PHYCLK;
} else {
src = TX_RETIME_SRC_CLKGEN;
freq = DWMAC_50MHZ;
}
} else if (IS_PHY_IF_MODE_RGMII(dwmac->interface)) {
/* On GiGa clk source can be either ext or from clkgen */
if (spd == SPEED_1000) {
freq = DWMAC_125MHZ;
} else {
/* Switch to clkgen for these speeds */
src = TX_RETIME_SRC_CLKGEN;
if (spd == SPEED_100)
freq = DWMAC_25MHZ;
else if (spd == SPEED_10)
freq = DWMAC_2_5MHZ;
}
}
if (src == TX_RETIME_SRC_CLKGEN && dwmac->clk && freq)
clk_set_rate(dwmac->clk, freq);
regmap_update_bits(dwmac->regmap, reg, STIH4XX_RETIME_SRC_MASK,
stih4xx_tx_retime_val[src]);
}
static void stid127_fix_retime_src(void *priv, u32 spd)
{
struct sti_dwmac *dwmac = priv;
u32 reg = dwmac->ctrl_reg;
u32 freq = 0;
u32 val = 0;
if (dwmac->interface == PHY_INTERFACE_MODE_MII) {
val = STID127_ETH_SEL_INTERNAL_NOTEXT_TXCLK;
} else if (dwmac->interface == PHY_INTERFACE_MODE_RMII) {
if (!dwmac->ext_phyclk) {
val = STID127_ETH_SEL_INTERNAL_NOTEXT_PHYCLK;
freq = DWMAC_50MHZ;
}
} else if (IS_PHY_IF_MODE_RGMII(dwmac->interface)) {
val = STID127_ETH_SEL_INTERNAL_NOTEXT_TXCLK;
if (spd == SPEED_1000)
freq = DWMAC_125MHZ;
else if (spd == SPEED_100)
freq = DWMAC_25MHZ;
else if (spd == SPEED_10)
freq = DWMAC_2_5MHZ;
}
if (dwmac->clk && freq)
clk_set_rate(dwmac->clk, freq);
regmap_update_bits(dwmac->regmap, reg, STID127_RETIME_SRC_MASK, val);
}
static int sti_dwmac_init(struct platform_device *pdev, void *priv)
{
struct sti_dwmac *dwmac = priv;
struct regmap *regmap = dwmac->regmap;
int iface = dwmac->interface;
struct device *dev = dwmac->dev;
struct device_node *np = dev->of_node;
u32 reg = dwmac->ctrl_reg;
u32 val;
if (dwmac->clk)
clk_prepare_enable(dwmac->clk);
if (of_property_read_bool(np, "st,gmac_en"))
regmap_update_bits(regmap, reg, EN_MASK, EN);
regmap_update_bits(regmap, reg, MII_PHY_SEL_MASK, phy_intf_sels[iface]);
val = (iface == PHY_INTERFACE_MODE_REVMII) ? 0 : ENMII;
regmap_update_bits(regmap, reg, ENMII_MASK, val);
dwmac->fix_retime_src(priv, dwmac->speed);
return 0;
}
static void sti_dwmac_exit(struct platform_device *pdev, void *priv)
{
struct sti_dwmac *dwmac = priv;
if (dwmac->clk)
clk_disable_unprepare(dwmac->clk);
}
static int sti_dwmac_parse_data(struct sti_dwmac *dwmac,
struct platform_device *pdev)
{
struct resource *res;
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct regmap *regmap;
int err;
if (!np)
return -EINVAL;
/* clk selection from extra syscfg register */
dwmac->clk_sel_reg = -ENXIO;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sti-clkconf");
if (res)
dwmac->clk_sel_reg = res->start;
regmap = syscon_regmap_lookup_by_phandle(np, "st,syscon");
if (IS_ERR(regmap))
return PTR_ERR(regmap);
err = of_property_read_u32_index(np, "st,syscon", 1, &dwmac->ctrl_reg);
if (err) {
dev_err(dev, "Can't get sysconfig ctrl offset (%d)\n", err);
return err;
}
dwmac->dev = dev;
dwmac->interface = of_get_phy_mode(np);
dwmac->regmap = regmap;
dwmac->ext_phyclk = of_property_read_bool(np, "st,ext-phyclk");
dwmac->tx_retime_src = TX_RETIME_SRC_NA;
dwmac->speed = SPEED_100;
if (IS_PHY_IF_MODE_GBIT(dwmac->interface)) {
const char *rs;
dwmac->tx_retime_src = TX_RETIME_SRC_CLKGEN;
err = of_property_read_string(np, "st,tx-retime-src", &rs);
if (err < 0) {
dev_warn(dev, "Use internal clock source\n");
} else {
if (!strcasecmp(rs, "clk_125"))
dwmac->tx_retime_src = TX_RETIME_SRC_CLK_125;
else if (!strcasecmp(rs, "txclk"))
dwmac->tx_retime_src = TX_RETIME_SRC_TXCLK;
}
dwmac->speed = SPEED_1000;
}
dwmac->clk = devm_clk_get(dev, "sti-ethclk");
if (IS_ERR(dwmac->clk)) {
dev_warn(dev, "No phy clock provided...\n");
dwmac->clk = NULL;
}
return 0;
}
static int sti_dwmac_probe(struct platform_device *pdev)
{
struct plat_stmmacenet_data *plat_dat;
const struct sti_dwmac_of_data *data;
struct stmmac_resources stmmac_res;
struct sti_dwmac *dwmac;
int ret;
data = of_device_get_match_data(&pdev->dev);
if (!data) {
dev_err(&pdev->dev, "No OF match data provided\n");
return -EINVAL;
}
ret = stmmac_get_platform_resources(pdev, &stmmac_res);
if (ret)
return ret;
plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
if (IS_ERR(plat_dat))
return PTR_ERR(plat_dat);
dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
if (!dwmac)
return -ENOMEM;
ret = sti_dwmac_parse_data(dwmac, pdev);
if (ret) {
dev_err(&pdev->dev, "Unable to parse OF data\n");
return ret;
}
dwmac->fix_retime_src = data->fix_retime_src;
plat_dat->bsp_priv = dwmac;
plat_dat->init = sti_dwmac_init;
plat_dat->exit = sti_dwmac_exit;
plat_dat->fix_mac_speed = data->fix_retime_src;
ret = sti_dwmac_init(pdev, plat_dat->bsp_priv);
if (ret)
return ret;
return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
}
static const struct sti_dwmac_of_data stih4xx_dwmac_data = {
.fix_retime_src = stih4xx_fix_retime_src,
};
static const struct sti_dwmac_of_data stid127_dwmac_data = {
.fix_retime_src = stid127_fix_retime_src,
};
static const struct of_device_id sti_dwmac_match[] = {
{ .compatible = "st,stih415-dwmac", .data = &stih4xx_dwmac_data},
{ .compatible = "st,stih416-dwmac", .data = &stih4xx_dwmac_data},
{ .compatible = "st,stid127-dwmac", .data = &stid127_dwmac_data},
{ .compatible = "st,stih407-dwmac", .data = &stih4xx_dwmac_data},
{ }
};
MODULE_DEVICE_TABLE(of, sti_dwmac_match);
static struct platform_driver sti_dwmac_driver = {
.probe = sti_dwmac_probe,
.remove = stmmac_pltfr_remove,
.driver = {
.name = "sti-dwmac",
.pm = &stmmac_pltfr_pm_ops,
.of_match_table = sti_dwmac_match,
},
};
module_platform_driver(sti_dwmac_driver);
MODULE_AUTHOR("Srinivas Kandagatla <srinivas.kandagatla@st.com>");
MODULE_DESCRIPTION("STMicroelectronics DWMAC Specific Glue layer");
MODULE_LICENSE("GPL");