linux/drivers/mfd/wm8994-core.c
Linus Torvalds 2dfea3803d This is the MFD patch set for the 3.8 merge window.
We have several new drivers, most of the time coming with their sub devices
 drivers:
 
 - Austria Microsystem's AS3711
 - Nano River's viperboard
 - TI's TPS80031, AM335x TS/ADC,
 - Realtek's MMC/memstick card reader
 - Nokia's retu
 
 We also got some notable cleanups and improvements:
 
 - tps6586x got converted to IRQ domains.
 - tps65910 and tps65090 moved to the regmap IRQ API.
 - STMPE is now Device Tree aware.
 - A general twl6040 and twl-core cleanup, with moves to the regmap I/O and IRQ
   APIs and a conversion to the recently added PWM framework.
 - sta2x11 gained regmap support.
 
 Then the rest is mostly tiny cleanups and fixes, among which we have Mark's
 wm5xxx and wm8xxx patchset.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQznPnAAoJEIqAPN1PVmxKuA8P/0nOJduXFM1c0Gy+DD5DnJnG
 cXzzeSTV8iO3a3sHIye43QPJ5V2YUR5uxLTUEOo/G7my/MoZ/azeNidkUD3qLVlm
 wVIq35lcS8dWTZaY7nlpBcWc6e39UB0sEueuJNxyhOv5lnMKdi2tAow5f4vIRQnd
 Q67/EbrgqdltcOpGmVuCdQcvphvWgy+K65jzbJG5zXs7hGX13Q+M5RnYhx76kc8f
 TDd0APZ71n5/RyISFSBSu2vfl2kES6o47aMgqqXMEHri6d3puAaXM0rFoMzXg/4G
 eBdxndN25H7rW7xvt9tuUod2rn1AO7tif5d7jal3Cfj61y3iqKY30yb3OzS9XQXH
 9WZ2qDst11zvzQivxIkMGvfRXRfncNLWR4DrBSqVfSbYV2uQj2eS8C6ONwKVMXsQ
 5tjNp91PFqN19sWQjIjSMcrNswxgpvdQ9mqFTyOGmISbqrpPSTi+MuO8r9+xTfUF
 PnzUX2nVOW/i9NcI7uotjzh8jiw6t8XMVHhkehiSYR9hzCb6MaPsFPN4jWq9XA2m
 1htCHylNpHqHQ3Mup7Is6j0Li1ahdwfm4lbrgiVEA4t4Mqs5E/Ka+3V8laNAKylW
 PfCP/VmnJYzmgVTK/qobFNeKzRqR0i4WTL6T7oAxGL87Q4TJaqKpEkXWne8UXV+Q
 yIbN0fmWfCveCetM+vaf
 =F790
 -----END PGP SIGNATURE-----

Merge tag 'mfd-3.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

Pull MFS update from Samuel Ortiz:
 "This is the MFD patch set for the 3.8 merge window.

  We have several new drivers, most of the time coming with their sub
  devices drivers:

   - Austria Microsystem's AS3711
   - Nano River's viperboard
   - TI's TPS80031, AM335x TS/ADC,
   - Realtek's MMC/memstick card reader
   - Nokia's retu

  We also got some notable cleanups and improvements:

   - tps6586x got converted to IRQ domains.
   - tps65910 and tps65090 moved to the regmap IRQ API.
   - STMPE is now Device Tree aware.
   - A general twl6040 and twl-core cleanup, with moves to the regmap
     I/O and IRQ APIs and a conversion to the recently added PWM
     framework.
   - sta2x11 gained regmap support.

  Then the rest is mostly tiny cleanups and fixes, among which we have
  Mark's wm5xxx and wm8xxx patchset."

Far amount of annoying but largely trivial conflicts.  Many due to
__devinit/exit removal, others due to one or two of the new drivers also
having come in through another tree.

* tag 'mfd-3.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (119 commits)
  mfd: tps6507x: Convert to devm_kzalloc
  mfd: stmpe: Update DT support for stmpe driver
  mfd: wm5102: Add readback of DSP status 3 register
  mfd: arizona: Log if we fail to create the primary IRQ domain
  mfd: tps80031: MFD_TPS80031 needs to select REGMAP_IRQ
  mfd: tps80031: Add terminating entry for tps80031_id_table
  mfd: sta2x11: Fix potential NULL pointer dereference in __sta2x11_mfd_mask()
  mfd: wm5102: Add tuning for revision B
  mfd: arizona: Defer patch initialistation until after first device boot
  mfd: tps65910: Fix wrong ack_base register
  mfd: tps65910: Remove unused data
  mfd: stmpe: Get rid of irq_invert_polarity
  mfd: ab8500-core: Fix invalid free of devm_ allocated data
  mfd: wm5102: Mark DSP memory regions as volatile
  mfd: wm5102: Correct default for LDO1_CONTROL_2
  mfd: arizona: Register haptics devices
  mfd: wm8994: Make current device behaviour the default
  mfd: tps65090: MFD_TPS65090 needs to select REGMAP_IRQ
  mfd: Fix stmpe.c build when OF is not enabled
  mfd: jz4740-adc: Use devm_kzalloc
  ...
2012-12-16 18:55:20 -08:00

750 lines
18 KiB
C

/*
* wm8994-core.c -- Device access for Wolfson WM8994
*
* Copyright 2009 Wolfson Microelectronics PLC.
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/err.h>
#include <linux/delay.h>
#include <linux/mfd/core.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/regulator/machine.h>
#include <linux/mfd/wm8994/core.h>
#include <linux/mfd/wm8994/pdata.h>
#include <linux/mfd/wm8994/registers.h>
#include "wm8994.h"
/**
* wm8994_reg_read: Read a single WM8994 register.
*
* @wm8994: Device to read from.
* @reg: Register to read.
*/
int wm8994_reg_read(struct wm8994 *wm8994, unsigned short reg)
{
unsigned int val;
int ret;
ret = regmap_read(wm8994->regmap, reg, &val);
if (ret < 0)
return ret;
else
return val;
}
EXPORT_SYMBOL_GPL(wm8994_reg_read);
/**
* wm8994_bulk_read: Read multiple WM8994 registers
*
* @wm8994: Device to read from
* @reg: First register
* @count: Number of registers
* @buf: Buffer to fill. The data will be returned big endian.
*/
int wm8994_bulk_read(struct wm8994 *wm8994, unsigned short reg,
int count, u16 *buf)
{
return regmap_bulk_read(wm8994->regmap, reg, buf, count);
}
/**
* wm8994_reg_write: Write a single WM8994 register.
*
* @wm8994: Device to write to.
* @reg: Register to write to.
* @val: Value to write.
*/
int wm8994_reg_write(struct wm8994 *wm8994, unsigned short reg,
unsigned short val)
{
return regmap_write(wm8994->regmap, reg, val);
}
EXPORT_SYMBOL_GPL(wm8994_reg_write);
/**
* wm8994_bulk_write: Write multiple WM8994 registers
*
* @wm8994: Device to write to
* @reg: First register
* @count: Number of registers
* @buf: Buffer to write from. Data must be big-endian formatted.
*/
int wm8994_bulk_write(struct wm8994 *wm8994, unsigned short reg,
int count, const u16 *buf)
{
return regmap_raw_write(wm8994->regmap, reg, buf, count * sizeof(u16));
}
EXPORT_SYMBOL_GPL(wm8994_bulk_write);
/**
* wm8994_set_bits: Set the value of a bitfield in a WM8994 register
*
* @wm8994: Device to write to.
* @reg: Register to write to.
* @mask: Mask of bits to set.
* @val: Value to set (unshifted)
*/
int wm8994_set_bits(struct wm8994 *wm8994, unsigned short reg,
unsigned short mask, unsigned short val)
{
return regmap_update_bits(wm8994->regmap, reg, mask, val);
}
EXPORT_SYMBOL_GPL(wm8994_set_bits);
static struct mfd_cell wm8994_regulator_devs[] = {
{
.name = "wm8994-ldo",
.id = 1,
.pm_runtime_no_callbacks = true,
},
{
.name = "wm8994-ldo",
.id = 2,
.pm_runtime_no_callbacks = true,
},
};
static struct resource wm8994_codec_resources[] = {
{
.start = WM8994_IRQ_TEMP_SHUT,
.end = WM8994_IRQ_TEMP_WARN,
.flags = IORESOURCE_IRQ,
},
};
static struct resource wm8994_gpio_resources[] = {
{
.start = WM8994_IRQ_GPIO(1),
.end = WM8994_IRQ_GPIO(11),
.flags = IORESOURCE_IRQ,
},
};
static struct mfd_cell wm8994_devs[] = {
{
.name = "wm8994-codec",
.num_resources = ARRAY_SIZE(wm8994_codec_resources),
.resources = wm8994_codec_resources,
},
{
.name = "wm8994-gpio",
.num_resources = ARRAY_SIZE(wm8994_gpio_resources),
.resources = wm8994_gpio_resources,
.pm_runtime_no_callbacks = true,
},
};
/*
* Supplies for the main bulk of CODEC; the LDO supplies are ignored
* and should be handled via the standard regulator API supply
* management.
*/
static const char *wm1811_main_supplies[] = {
"DBVDD1",
"DBVDD2",
"DBVDD3",
"DCVDD",
"AVDD1",
"AVDD2",
"CPVDD",
"SPKVDD1",
"SPKVDD2",
};
static const char *wm8994_main_supplies[] = {
"DBVDD",
"DCVDD",
"AVDD1",
"AVDD2",
"CPVDD",
"SPKVDD1",
"SPKVDD2",
};
static const char *wm8958_main_supplies[] = {
"DBVDD1",
"DBVDD2",
"DBVDD3",
"DCVDD",
"AVDD1",
"AVDD2",
"CPVDD",
"SPKVDD1",
"SPKVDD2",
};
#ifdef CONFIG_PM
static int wm8994_suspend(struct device *dev)
{
struct wm8994 *wm8994 = dev_get_drvdata(dev);
int ret;
/* Don't actually go through with the suspend if the CODEC is
* still active (eg, for audio passthrough from CP. */
ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_1);
if (ret < 0) {
dev_err(dev, "Failed to read power status: %d\n", ret);
} else if (ret & WM8994_VMID_SEL_MASK) {
dev_dbg(dev, "CODEC still active, ignoring suspend\n");
return 0;
}
ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_4);
if (ret < 0) {
dev_err(dev, "Failed to read power status: %d\n", ret);
} else if (ret & (WM8994_AIF2ADCL_ENA | WM8994_AIF2ADCR_ENA |
WM8994_AIF1ADC2L_ENA | WM8994_AIF1ADC2R_ENA |
WM8994_AIF1ADC1L_ENA | WM8994_AIF1ADC1R_ENA)) {
dev_dbg(dev, "CODEC still active, ignoring suspend\n");
return 0;
}
ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_5);
if (ret < 0) {
dev_err(dev, "Failed to read power status: %d\n", ret);
} else if (ret & (WM8994_AIF2DACL_ENA | WM8994_AIF2DACR_ENA |
WM8994_AIF1DAC2L_ENA | WM8994_AIF1DAC2R_ENA |
WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA)) {
dev_dbg(dev, "CODEC still active, ignoring suspend\n");
return 0;
}
switch (wm8994->type) {
case WM8958:
case WM1811:
ret = wm8994_reg_read(wm8994, WM8958_MIC_DETECT_1);
if (ret < 0) {
dev_err(dev, "Failed to read power status: %d\n", ret);
} else if (ret & WM8958_MICD_ENA) {
dev_dbg(dev, "CODEC still active, ignoring suspend\n");
return 0;
}
break;
default:
break;
}
switch (wm8994->type) {
case WM1811:
ret = wm8994_reg_read(wm8994, WM8994_ANTIPOP_2);
if (ret < 0) {
dev_err(dev, "Failed to read jackdet: %d\n", ret);
} else if (ret & WM1811_JACKDET_MODE_MASK) {
dev_dbg(dev, "CODEC still active, ignoring suspend\n");
return 0;
}
break;
default:
break;
}
switch (wm8994->type) {
case WM1811:
ret = wm8994_reg_read(wm8994, WM8994_ANTIPOP_2);
if (ret < 0) {
dev_err(dev, "Failed to read jackdet: %d\n", ret);
} else if (ret & WM1811_JACKDET_MODE_MASK) {
dev_dbg(dev, "CODEC still active, ignoring suspend\n");
return 0;
}
break;
default:
break;
}
/* Disable LDO pulldowns while the device is suspended if we
* don't know that something will be driving them. */
if (!wm8994->ldo_ena_always_driven)
wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD,
WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD);
/* Explicitly put the device into reset in case regulators
* don't get disabled in order to ensure consistent restart.
*/
wm8994_reg_write(wm8994, WM8994_SOFTWARE_RESET,
wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET));
regcache_mark_dirty(wm8994->regmap);
/* Restore GPIO registers to prevent problems with mismatched
* pin configurations.
*/
ret = regcache_sync_region(wm8994->regmap, WM8994_GPIO_1,
WM8994_GPIO_11);
if (ret != 0)
dev_err(dev, "Failed to restore GPIO registers: %d\n", ret);
/* In case one of the GPIOs is used as a wake input. */
ret = regcache_sync_region(wm8994->regmap,
WM8994_INTERRUPT_STATUS_1_MASK,
WM8994_INTERRUPT_STATUS_1_MASK);
if (ret != 0)
dev_err(dev, "Failed to restore interrupt mask: %d\n", ret);
regcache_cache_only(wm8994->regmap, true);
wm8994->suspended = true;
ret = regulator_bulk_disable(wm8994->num_supplies,
wm8994->supplies);
if (ret != 0) {
dev_err(dev, "Failed to disable supplies: %d\n", ret);
return ret;
}
return 0;
}
static int wm8994_resume(struct device *dev)
{
struct wm8994 *wm8994 = dev_get_drvdata(dev);
int ret;
/* We may have lied to the PM core about suspending */
if (!wm8994->suspended)
return 0;
ret = regulator_bulk_enable(wm8994->num_supplies,
wm8994->supplies);
if (ret != 0) {
dev_err(dev, "Failed to enable supplies: %d\n", ret);
return ret;
}
regcache_cache_only(wm8994->regmap, false);
ret = regcache_sync(wm8994->regmap);
if (ret != 0) {
dev_err(dev, "Failed to restore register map: %d\n", ret);
goto err_enable;
}
/* Disable LDO pulldowns while the device is active */
wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD,
0);
wm8994->suspended = false;
return 0;
err_enable:
regulator_bulk_disable(wm8994->num_supplies, wm8994->supplies);
return ret;
}
#endif
#ifdef CONFIG_REGULATOR
static int wm8994_ldo_in_use(struct wm8994_pdata *pdata, int ldo)
{
struct wm8994_ldo_pdata *ldo_pdata;
if (!pdata)
return 0;
ldo_pdata = &pdata->ldo[ldo];
if (!ldo_pdata->init_data)
return 0;
return ldo_pdata->init_data->num_consumer_supplies != 0;
}
#else
static int wm8994_ldo_in_use(struct wm8994_pdata *pdata, int ldo)
{
return 0;
}
#endif
static const struct reg_default wm8994_revc_patch[] = {
{ 0x102, 0x3 },
{ 0x56, 0x3 },
{ 0x817, 0x0 },
{ 0x102, 0x0 },
};
static const struct reg_default wm8958_reva_patch[] = {
{ 0x102, 0x3 },
{ 0xcb, 0x81 },
{ 0x817, 0x0 },
{ 0x102, 0x0 },
};
static const struct reg_default wm1811_reva_patch[] = {
{ 0x102, 0x3 },
{ 0x56, 0xc07 },
{ 0x5d, 0x7e },
{ 0x5e, 0x0 },
{ 0x102, 0x0 },
};
/*
* Instantiate the generic non-control parts of the device.
*/
static int wm8994_device_init(struct wm8994 *wm8994, int irq)
{
struct wm8994_pdata *pdata;
struct regmap_config *regmap_config;
const struct reg_default *regmap_patch = NULL;
const char *devname;
int ret, i, patch_regs;
int pulls = 0;
if (dev_get_platdata(wm8994->dev)) {
pdata = dev_get_platdata(wm8994->dev);
wm8994->pdata = *pdata;
}
pdata = &wm8994->pdata;
dev_set_drvdata(wm8994->dev, wm8994);
/* Add the on-chip regulators first for bootstrapping */
ret = mfd_add_devices(wm8994->dev, -1,
wm8994_regulator_devs,
ARRAY_SIZE(wm8994_regulator_devs),
NULL, 0, NULL);
if (ret != 0) {
dev_err(wm8994->dev, "Failed to add children: %d\n", ret);
goto err;
}
switch (wm8994->type) {
case WM1811:
wm8994->num_supplies = ARRAY_SIZE(wm1811_main_supplies);
break;
case WM8994:
wm8994->num_supplies = ARRAY_SIZE(wm8994_main_supplies);
break;
case WM8958:
wm8994->num_supplies = ARRAY_SIZE(wm8958_main_supplies);
break;
default:
BUG();
goto err;
}
wm8994->supplies = devm_kzalloc(wm8994->dev,
sizeof(struct regulator_bulk_data) *
wm8994->num_supplies, GFP_KERNEL);
if (!wm8994->supplies) {
ret = -ENOMEM;
goto err;
}
switch (wm8994->type) {
case WM1811:
for (i = 0; i < ARRAY_SIZE(wm1811_main_supplies); i++)
wm8994->supplies[i].supply = wm1811_main_supplies[i];
break;
case WM8994:
for (i = 0; i < ARRAY_SIZE(wm8994_main_supplies); i++)
wm8994->supplies[i].supply = wm8994_main_supplies[i];
break;
case WM8958:
for (i = 0; i < ARRAY_SIZE(wm8958_main_supplies); i++)
wm8994->supplies[i].supply = wm8958_main_supplies[i];
break;
default:
BUG();
goto err;
}
ret = regulator_bulk_get(wm8994->dev, wm8994->num_supplies,
wm8994->supplies);
if (ret != 0) {
dev_err(wm8994->dev, "Failed to get supplies: %d\n", ret);
goto err;
}
ret = regulator_bulk_enable(wm8994->num_supplies,
wm8994->supplies);
if (ret != 0) {
dev_err(wm8994->dev, "Failed to enable supplies: %d\n", ret);
goto err_get;
}
ret = wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET);
if (ret < 0) {
dev_err(wm8994->dev, "Failed to read ID register\n");
goto err_enable;
}
switch (ret) {
case 0x1811:
devname = "WM1811";
if (wm8994->type != WM1811)
dev_warn(wm8994->dev, "Device registered as type %d\n",
wm8994->type);
wm8994->type = WM1811;
break;
case 0x8994:
devname = "WM8994";
if (wm8994->type != WM8994)
dev_warn(wm8994->dev, "Device registered as type %d\n",
wm8994->type);
wm8994->type = WM8994;
break;
case 0x8958:
devname = "WM8958";
if (wm8994->type != WM8958)
dev_warn(wm8994->dev, "Device registered as type %d\n",
wm8994->type);
wm8994->type = WM8958;
break;
default:
dev_err(wm8994->dev, "Device is not a WM8994, ID is %x\n",
ret);
ret = -EINVAL;
goto err_enable;
}
ret = wm8994_reg_read(wm8994, WM8994_CHIP_REVISION);
if (ret < 0) {
dev_err(wm8994->dev, "Failed to read revision register: %d\n",
ret);
goto err_enable;
}
wm8994->revision = ret & WM8994_CHIP_REV_MASK;
wm8994->cust_id = (ret & WM8994_CUST_ID_MASK) >> WM8994_CUST_ID_SHIFT;
switch (wm8994->type) {
case WM8994:
switch (wm8994->revision) {
case 0:
case 1:
dev_warn(wm8994->dev,
"revision %c not fully supported\n",
'A' + wm8994->revision);
break;
case 2:
case 3:
default:
regmap_patch = wm8994_revc_patch;
patch_regs = ARRAY_SIZE(wm8994_revc_patch);
break;
}
break;
case WM8958:
switch (wm8994->revision) {
case 0:
regmap_patch = wm8958_reva_patch;
patch_regs = ARRAY_SIZE(wm8958_reva_patch);
break;
default:
break;
}
break;
case WM1811:
/* Revision C did not change the relevant layer */
if (wm8994->revision > 1)
wm8994->revision++;
regmap_patch = wm1811_reva_patch;
patch_regs = ARRAY_SIZE(wm1811_reva_patch);
break;
default:
break;
}
dev_info(wm8994->dev, "%s revision %c CUST_ID %02x\n", devname,
'A' + wm8994->revision, wm8994->cust_id);
switch (wm8994->type) {
case WM1811:
regmap_config = &wm1811_regmap_config;
break;
case WM8994:
regmap_config = &wm8994_regmap_config;
break;
case WM8958:
regmap_config = &wm8958_regmap_config;
break;
default:
dev_err(wm8994->dev, "Unknown device type %d\n", wm8994->type);
return -EINVAL;
}
ret = regmap_reinit_cache(wm8994->regmap, regmap_config);
if (ret != 0) {
dev_err(wm8994->dev, "Failed to reinit register cache: %d\n",
ret);
return ret;
}
if (regmap_patch) {
ret = regmap_register_patch(wm8994->regmap, regmap_patch,
patch_regs);
if (ret != 0) {
dev_err(wm8994->dev, "Failed to register patch: %d\n",
ret);
goto err;
}
}
wm8994->irq_base = pdata->irq_base;
wm8994->gpio_base = pdata->gpio_base;
/* GPIO configuration is only applied if it's non-zero */
for (i = 0; i < ARRAY_SIZE(pdata->gpio_defaults); i++) {
if (pdata->gpio_defaults[i]) {
wm8994_set_bits(wm8994, WM8994_GPIO_1 + i,
0xffff, pdata->gpio_defaults[i]);
}
}
wm8994->ldo_ena_always_driven = pdata->ldo_ena_always_driven;
if (pdata->spkmode_pu)
pulls |= WM8994_SPKMODE_PU;
/* Disable unneeded pulls */
wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD |
WM8994_SPKMODE_PU | WM8994_CSNADDR_PD,
pulls);
/* In some system designs where the regulators are not in use,
* we can achieve a small reduction in leakage currents by
* floating LDO outputs. This bit makes no difference if the
* LDOs are enabled, it only affects cases where the LDOs were
* in operation and are then disabled.
*/
for (i = 0; i < WM8994_NUM_LDO_REGS; i++) {
if (wm8994_ldo_in_use(pdata, i))
wm8994_set_bits(wm8994, WM8994_LDO_1 + i,
WM8994_LDO1_DISCH, WM8994_LDO1_DISCH);
else
wm8994_set_bits(wm8994, WM8994_LDO_1 + i,
WM8994_LDO1_DISCH, 0);
}
wm8994_irq_init(wm8994);
ret = mfd_add_devices(wm8994->dev, -1,
wm8994_devs, ARRAY_SIZE(wm8994_devs),
NULL, 0, NULL);
if (ret != 0) {
dev_err(wm8994->dev, "Failed to add children: %d\n", ret);
goto err_irq;
}
pm_runtime_enable(wm8994->dev);
pm_runtime_idle(wm8994->dev);
return 0;
err_irq:
wm8994_irq_exit(wm8994);
err_enable:
regulator_bulk_disable(wm8994->num_supplies,
wm8994->supplies);
err_get:
regulator_bulk_free(wm8994->num_supplies, wm8994->supplies);
err:
mfd_remove_devices(wm8994->dev);
return ret;
}
static void wm8994_device_exit(struct wm8994 *wm8994)
{
pm_runtime_disable(wm8994->dev);
mfd_remove_devices(wm8994->dev);
wm8994_irq_exit(wm8994);
regulator_bulk_disable(wm8994->num_supplies,
wm8994->supplies);
regulator_bulk_free(wm8994->num_supplies, wm8994->supplies);
}
static const struct of_device_id wm8994_of_match[] = {
{ .compatible = "wlf,wm1811", },
{ .compatible = "wlf,wm8994", },
{ .compatible = "wlf,wm8958", },
{ }
};
MODULE_DEVICE_TABLE(of, wm8994_of_match);
static int wm8994_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct wm8994 *wm8994;
int ret;
wm8994 = devm_kzalloc(&i2c->dev, sizeof(struct wm8994), GFP_KERNEL);
if (wm8994 == NULL)
return -ENOMEM;
i2c_set_clientdata(i2c, wm8994);
wm8994->dev = &i2c->dev;
wm8994->irq = i2c->irq;
wm8994->type = id->driver_data;
wm8994->regmap = devm_regmap_init_i2c(i2c, &wm8994_base_regmap_config);
if (IS_ERR(wm8994->regmap)) {
ret = PTR_ERR(wm8994->regmap);
dev_err(wm8994->dev, "Failed to allocate register map: %d\n",
ret);
return ret;
}
return wm8994_device_init(wm8994, i2c->irq);
}
static int wm8994_i2c_remove(struct i2c_client *i2c)
{
struct wm8994 *wm8994 = i2c_get_clientdata(i2c);
wm8994_device_exit(wm8994);
return 0;
}
static const struct i2c_device_id wm8994_i2c_id[] = {
{ "wm1811", WM1811 },
{ "wm1811a", WM1811 },
{ "wm8994", WM8994 },
{ "wm8958", WM8958 },
{ }
};
MODULE_DEVICE_TABLE(i2c, wm8994_i2c_id);
static UNIVERSAL_DEV_PM_OPS(wm8994_pm_ops, wm8994_suspend, wm8994_resume,
NULL);
static struct i2c_driver wm8994_i2c_driver = {
.driver = {
.name = "wm8994",
.owner = THIS_MODULE,
.pm = &wm8994_pm_ops,
.of_match_table = wm8994_of_match,
},
.probe = wm8994_i2c_probe,
.remove = wm8994_i2c_remove,
.id_table = wm8994_i2c_id,
};
module_i2c_driver(wm8994_i2c_driver);
MODULE_DESCRIPTION("Core support for the WM8994 audio CODEC");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");