linux/arch/arm/boot/dts/omap4-sdp.dts
Balaji T K 2562f52813 ARM: dts: omap4-sdp: Fix pin muxing for wl12xx
Mux mode for wlan/sdmmc5 should be MODE0 in pinmux_wl12xx_pins and
Enable Pull up on sdmmc5_clk to detect SDIO card.

This fixes WLAN on omap4-sdp that got broken in v3.10 when we
moved omap4 to boot using device tree only as I did not have
the WL12XX card in my omap4 SDP to test with. The commit that
attempted to make WL12XX working on omap4 SDP was 775d2418f3
(ARM: dts: Fix muxing and regulator for wl12xx on the SDIO
bus for blaze).

Signed-off-by: Balaji T K <balajitk@ti.com>
[tony@atomide.com: updated comments for the regression]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-12-02 11:38:14 -08:00

553 lines
13 KiB
Plaintext

/*
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "omap443x.dtsi"
#include "elpida_ecb240abacn.dtsi"
/ {
model = "TI OMAP4 SDP board";
compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
memory {
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
vdd_eth: fixedregulator-vdd-eth {
compatible = "regulator-fixed";
regulator-name = "VDD_ETH";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 16 0>; /* gpio line 48 */
enable-active-high;
regulator-boot-on;
};
vbat: fixedregulator-vbat {
compatible = "regulator-fixed";
regulator-name = "VBAT";
regulator-min-microvolt = <3750000>;
regulator-max-microvolt = <3750000>;
regulator-boot-on;
};
leds {
compatible = "gpio-leds";
debug0 {
label = "omap4:green:debug0";
gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; /* 61 */
};
debug1 {
label = "omap4:green:debug1";
gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; /* 30 */
};
debug2 {
label = "omap4:green:debug2";
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; /* 7 */
};
debug3 {
label = "omap4:green:debug3";
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* 8 */
};
debug4 {
label = "omap4:green:debug4";
gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; /* 50 */
};
user1 {
label = "omap4:blue:user";
gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* 169 */
};
user2 {
label = "omap4:red:user";
gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* 170 */
};
user3 {
label = "omap4:green:user";
gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* 139 */
};
};
pwmleds {
compatible = "pwm-leds";
kpad {
label = "omap4::keypad";
pwms = <&twl_pwm 0 7812500>;
max-brightness = <127>;
};
charging {
label = "omap4:green:chrg";
pwms = <&twl_pwmled 0 7812500>;
max-brightness = <255>;
};
};
backlight {
compatible = "pwm-backlight";
pwms = <&twl_pwm 1 7812500>;
brightness-levels = <
0 10 20 30 40
50 60 70 80 90
100 110 120 127
>;
default-brightness-level = <13>;
};
sound {
compatible = "ti,abe-twl6040";
ti,model = "SDP4430";
ti,jack-detection = <1>;
ti,mclk-freq = <38400000>;
ti,mcpdm = <&mcpdm>;
ti,dmic = <&dmic>;
ti,twl6040 = <&twl6040>;
/* Audio routing */
ti,audio-routing =
"Headset Stereophone", "HSOL",
"Headset Stereophone", "HSOR",
"Earphone Spk", "EP",
"Ext Spk", "HFL",
"Ext Spk", "HFR",
"Line Out", "AUXL",
"Line Out", "AUXR",
"Vibrator", "VIBRAL",
"Vibrator", "VIBRAR",
"HSMIC", "Headset Mic",
"Headset Mic", "Headset Mic Bias",
"MAINMIC", "Main Handset Mic",
"Main Handset Mic", "Main Mic Bias",
"SUBMIC", "Sub Handset Mic",
"Sub Handset Mic", "Main Mic Bias",
"AFML", "Line In",
"AFMR", "Line In",
"DMic", "Digital Mic",
"Digital Mic", "Digital Mic1 Bias";
};
/* regulator for wl12xx on sdio5 */
wl12xx_vmmc: wl12xx_vmmc {
pinctrl-names = "default";
pinctrl-0 = <&wl12xx_gpio>;
compatible = "regulator-fixed";
regulator-name = "vwl1271";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&gpio2 22 0>;
startup-delay-us = <70000>;
enable-active-high;
};
};
&omap4_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <
&twl6040_pins
&mcpdm_pins
&dmic_pins
&mcbsp1_pins
&mcbsp2_pins
&dss_hdmi_pins
&tpd12s015_pins
>;
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
0xd8 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */
0xda (PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */
0xdc (PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */
0xde (PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
>;
};
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */
0x102 (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */
0x104 (PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
0x106 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
>;
};
uart4_pins: pinmux_uart4_pins {
pinctrl-single,pins = <
0x11c (PIN_INPUT | MUX_MODE0) /* uart4_rx.uart4_rx */
0x11e (PIN_OUTPUT | MUX_MODE0) /* uart4_tx.uart4_tx */
>;
};
twl6040_pins: pinmux_twl6040_pins {
pinctrl-single,pins = <
0xe0 (PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */
0x160 (PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */
>;
};
mcpdm_pins: pinmux_mcpdm_pins {
pinctrl-single,pins = <
0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */
0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */
0xca (PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */
0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */
0xce (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
>;
};
dmic_pins: pinmux_dmic_pins {
pinctrl-single,pins = <
0xd0 (PIN_OUTPUT | MUX_MODE0) /* abe_dmic_clk1.abe_dmic_clk1 */
0xd2 (PIN_INPUT | MUX_MODE0) /* abe_dmic_din1.abe_dmic_din1 */
0xd4 (PIN_INPUT | MUX_MODE0) /* abe_dmic_din2.abe_dmic_din2 */
0xd6 (PIN_INPUT | MUX_MODE0) /* abe_dmic_din3.abe_dmic_din3 */
>;
};
mcbsp1_pins: pinmux_mcbsp1_pins {
pinctrl-single,pins = <
0xbe (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
0xc4 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
>;
};
mcbsp2_pins: pinmux_mcbsp2_pins {
pinctrl-single,pins = <
0xb6 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
0xb8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dr.abe_mcbsp2_dr */
0xba (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dx.abe_mcbsp2_dx */
0xbc (PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx.abe_mcbsp2_fsx */
>;
};
mcspi1_pins: pinmux_mcspi1_pins {
pinctrl-single,pins = <
0xf2 (PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */
0xf4 (PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
0xf6 (PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
0xf8 (PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
>;
};
dss_hdmi_pins: pinmux_dss_hdmi_pins {
pinctrl-single,pins = <
0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
0x5c (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */
0x5e (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */
>;
};
tpd12s015_pins: pinmux_tpd12s015_pins {
pinctrl-single,pins = <
0x22 (PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */
0x48 (PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */
0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
0xe2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
0xe4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
0xe6 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
0xe8 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
>;
};
i2c3_pins: pinmux_i2c3_pins {
pinctrl-single,pins = <
0xea (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
0xec (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
>;
};
i2c4_pins: pinmux_i2c4_pins {
pinctrl-single,pins = <
0xee (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
>;
};
/* wl12xx GPIO output for WLAN_EN */
wl12xx_gpio: pinmux_wl12xx_gpio {
pinctrl-single,pins = <
0x3c (PIN_OUTPUT | MUX_MODE3) /* gpmc_nwp.gpio_54 */
>;
};
/* wl12xx GPIO inputs and SDIO pins */
wl12xx_pins: pinmux_wl12xx_pins {
pinctrl-single,pins = <
0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
0x112 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
>;
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
clock-frequency = <400000>;
twl: twl@48 {
reg = <0x48>;
/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
interrupt-parent = <&gic>;
};
twl6040: twl@4b {
compatible = "ti,twl6040";
reg = <0x4b>;
/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
interrupt-parent = <&gic>;
ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */
vio-supply = <&v1v8>;
v2v1-supply = <&v2v1>;
enable-active-high;
/* regulators for vibra motor */
vddvibl-supply = <&vbat>;
vddvibr-supply = <&vbat>;
vibra {
/* Vibra driver, motor resistance parameters */
ti,vibldrv-res = <8>;
ti,vibrdrv-res = <3>;
ti,viblmotor-res = <10>;
ti,vibrmotor-res = <10>;
};
};
};
#include "twl6030.dtsi"
#include "twl6030_omap4.dtsi"
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
clock-frequency = <400000>;
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins>;
clock-frequency = <400000>;
/*
* Temperature Sensor
* http://www.ti.com/lit/ds/symlink/tmp105.pdf
*/
tmp105@48 {
compatible = "ti,tmp105";
reg = <0x48>;
};
/*
* Ambient Light Sensor
* http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf
*/
bh1780@29 {
compatible = "rohm,bh1780";
reg = <0x29>;
};
};
&i2c4 {
pinctrl-names = "default";
pinctrl-0 = <&i2c4_pins>;
clock-frequency = <400000>;
/*
* 3-Axis Digital Compass
* http://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf
*/
hmc5843@1e {
compatible = "honeywell,hmc5843";
reg = <0x1e>;
};
};
&mcspi1 {
pinctrl-names = "default";
pinctrl-0 = <&mcspi1_pins>;
eth@0 {
compatible = "ks8851";
spi-max-frequency = <24000000>;
reg = <0>;
interrupt-parent = <&gpio2>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>; /* gpio line 34 */
vdd-supply = <&vdd_eth>;
};
};
&mmc1 {
vmmc-supply = <&vmmc>;
bus-width = <8>;
};
&mmc2 {
vmmc-supply = <&vaux1>;
bus-width = <8>;
ti,non-removable;
};
&mmc3 {
status = "disabled";
};
&mmc4 {
status = "disabled";
};
&mmc5 {
pinctrl-names = "default";
pinctrl-0 = <&wl12xx_pins>;
vmmc-supply = <&wl12xx_vmmc>;
non-removable;
bus-width = <4>;
cap-power-off-card;
};
&emif1 {
cs1-used;
device-handle = <&elpida_ECB240ABACN>;
};
&emif2 {
cs1-used;
device-handle = <&elpida_ECB240ABACN>;
};
&keypad {
keypad,num-rows = <8>;
keypad,num-columns = <8>;
linux,keymap = <0x00000012 /* KEY_E */
0x00010013 /* KEY_R */
0x00020014 /* KEY_T */
0x00030066 /* KEY_HOME */
0x0004003f /* KEY_F5 */
0x000500f0 /* KEY_UNKNOWN */
0x00060017 /* KEY_I */
0x0007002a /* KEY_LEFTSHIFT */
0x01000020 /* KEY_D*/
0x01010021 /* KEY_F */
0x01020022 /* KEY_G */
0x010300e7 /* KEY_SEND */
0x01040040 /* KEY_F6 */
0x010500f0 /* KEY_UNKNOWN */
0x01060025 /* KEY_K */
0x0107001c /* KEY_ENTER */
0x0200002d /* KEY_X */
0x0201002e /* KEY_C */
0x0202002f /* KEY_V */
0x0203006b /* KEY_END */
0x02040041 /* KEY_F7 */
0x020500f0 /* KEY_UNKNOWN */
0x02060034 /* KEY_DOT */
0x0207003a /* KEY_CAPSLOCK */
0x0300002c /* KEY_Z */
0x0301004e /* KEY_KPLUS */
0x03020030 /* KEY_B */
0x0303003b /* KEY_F1 */
0x03040042 /* KEY_F8 */
0x030500f0 /* KEY_UNKNOWN */
0x03060018 /* KEY_O */
0x03070039 /* KEY_SPACE */
0x04000011 /* KEY_W */
0x04010015 /* KEY_Y */
0x04020016 /* KEY_U */
0x0403003c /* KEY_F2 */
0x04040073 /* KEY_VOLUMEUP */
0x040500f0 /* KEY_UNKNOWN */
0x04060026 /* KEY_L */
0x04070069 /* KEY_LEFT */
0x0500001f /* KEY_S */
0x05010023 /* KEY_H */
0x05020024 /* KEY_J */
0x0503003d /* KEY_F3 */
0x05040043 /* KEY_F9 */
0x05050072 /* KEY_VOLUMEDOWN */
0x05060032 /* KEY_M */
0x0507006a /* KEY_RIGHT */
0x06000010 /* KEY_Q */
0x0601001e /* KEY_A */
0x06020031 /* KEY_N */
0x0603009e /* KEY_BACK */
0x0604000e /* KEY_BACKSPACE */
0x060500f0 /* KEY_UNKNOWN */
0x06060019 /* KEY_P */
0x06070067 /* KEY_UP */
0x07000094 /* KEY_PROG1 */
0x07010095 /* KEY_PROG2 */
0x070200ca /* KEY_PROG3 */
0x070300cb /* KEY_PROG4 */
0x0704003e /* KEY_F4 */
0x070500f0 /* KEY_UNKNOWN */
0x07060160 /* KEY_OK */
0x0707006c>; /* KEY_DOWN */
linux,input-no-autorepeat;
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&uart4_pins>;
};
&mcbsp3 {
status = "disabled";
};
&twl_usb_comparator {
usb-supply = <&vusb>;
};
&usb_otg_hs {
interface-type = <1>;
mode = <3>;
power = <50>;
};