linux/arch/arm/mach-realview/Kconfig
Catalin Marinas 2503a5ecd8 ARM: 6201/1: RealView: Do not use outer_sync() on ARM11MPCore boards with L220
RealView boards with certain revisions of the L220 cache controller (ARM11*
processors only) may have issues (hardware deadlock) with the recent changes to
the mb() barrier implementation (DSB followed by an L2 cache sync). The patch
redefines the RealView ARM11MPCore mandatory barriers without the outer_sync()
call.

Cc: <stable@kernel.org>
Tested-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-02 10:10:09 +01:00

93 lines
2.8 KiB
Plaintext

menu "RealView platform type"
depends on ARCH_REALVIEW
config MACH_REALVIEW_EB
bool "Support RealView/EB platform"
select ARM_GIC
help
Include support for the ARM(R) RealView Emulation Baseboard platform.
config REALVIEW_EB_A9MP
bool "Support Multicore Cortex-A9"
depends on MACH_REALVIEW_EB
select CPU_V7
help
Enable support for the Cortex-A9MPCore tile on the Realview platform.
config REALVIEW_EB_ARM11MP
bool "Support ARM11MPCore tile"
depends on MACH_REALVIEW_EB
select CPU_V6
select ARCH_HAS_BARRIERS if SMP
help
Enable support for the ARM11MPCore tile on the Realview platform.
config REALVIEW_EB_ARM11MP_REVB
bool "Support ARM11MPCore RevB tile"
depends on REALVIEW_EB_ARM11MP
help
Enable support for the ARM11MPCore RevB tile on the Realview
platform. Since there are device address differences, a
kernel built with this option enabled is not compatible with
other revisions of the ARM11MPCore tile.
config MACH_REALVIEW_PB11MP
bool "Support RealView/PB11MPCore platform"
select CPU_V6
select ARM_GIC
select HAVE_PATA_PLATFORM
select ARCH_HAS_BARRIERS if SMP
help
Include support for the ARM(R) RealView MPCore Platform Baseboard.
PB11MPCore is a platform with an on-board ARM11MPCore and has
support for PCI-E and Compact Flash.
config MACH_REALVIEW_PB1176
bool "Support RealView/PB1176 platform"
select CPU_V6
select ARM_GIC
help
Include support for the ARM(R) RealView ARM1176 Platform Baseboard.
config REALVIEW_PB1176_SECURE_FLASH
bool "Allow access to the secure flash memory block"
depends on MACH_REALVIEW_PB1176
default n
help
Select this option if Linux will only run in secure mode on the
RealView PB1176 platform and access to the secure flash memory
block (64MB @ 0x3c000000) is required.
config MACH_REALVIEW_PBA8
bool "Support RealView/PB-A8 platform"
select CPU_V7
select ARM_GIC
select HAVE_PATA_PLATFORM
help
Include support for the ARM(R) RealView Cortex-A8 Platform Baseboard.
PB-A8 is a platform with an on-board Cortex-A8 and has support for
PCI-E and Compact Flash.
config MACH_REALVIEW_PBX
bool "Support RealView/PBX platform"
select ARM_GIC
select HAVE_PATA_PLATFORM
select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
select ZONE_DMA if SPARSEMEM
help
Include support for the ARM(R) RealView PBX platform.
config REALVIEW_HIGH_PHYS_OFFSET
bool "High physical base address for the RealView platform"
depends on MMU && !MACH_REALVIEW_PB1176
default y
help
RealView boards other than PB1176 have the RAM available at
0x70000000, 256MB of which being mirrored at 0x00000000. If
the board supports 512MB of RAM, this option allows the
memory to be accessed contiguously at the high physical
offset. On the PBX board, disabling this option allows 1GB of
RAM to be used with SPARSEMEM.
endmenu