linux/drivers/bluetooth/btrtl.h
Jian-Hong Pan 7af3f558ac Bluetooth: btrtl: HCI reset on close for Realtek BT chip
Realtek RTL8822BE BT chip on ASUS X420FA cannot be turned on correctly
after on-off several times. Bluetooth daemon sets BT mode failed when
this issue happens. Scanning must be active while turning off for this
bug to be hit.

bluetoothd[1576]: Failed to set mode: Failed (0x03)

If BT is turned off, then turned on again, it works correctly again.

According to the vendor driver, the HCI_QUIRK_RESET_ON_CLOSE flag is set
during probing. So, this patch makes Realtek's BT reset on close to fix
this issue.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=203429
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Reviewed-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06 12:32:50 +02:00

102 lines
2.3 KiB
C

/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Bluetooth support for Realtek devices
*
* Copyright (C) 2015 Endless Mobile, Inc.
*/
#define RTL_FRAG_LEN 252
#define rtl_dev_err(dev, fmt, ...) bt_dev_err(dev, "RTL: " fmt, ##__VA_ARGS__)
#define rtl_dev_warn(dev, fmt, ...) bt_dev_warn(dev, "RTL: " fmt, ##__VA_ARGS__)
#define rtl_dev_info(dev, fmt, ...) bt_dev_info(dev, "RTL: " fmt, ##__VA_ARGS__)
#define rtl_dev_dbg(dev, fmt, ...) bt_dev_dbg(dev, "RTL: " fmt, ##__VA_ARGS__)
struct btrtl_device_info;
struct rtl_download_cmd {
__u8 index;
__u8 data[RTL_FRAG_LEN];
} __packed;
struct rtl_download_response {
__u8 status;
__u8 index;
} __packed;
struct rtl_rom_version_evt {
__u8 status;
__u8 version;
} __packed;
struct rtl_epatch_header {
__u8 signature[8];
__le32 fw_version;
__le16 num_patches;
} __packed;
struct rtl_vendor_config_entry {
__le16 offset;
__u8 len;
__u8 data[0];
} __packed;
struct rtl_vendor_config {
__le32 signature;
__le16 total_len;
struct rtl_vendor_config_entry entry[0];
} __packed;
#if IS_ENABLED(CONFIG_BT_RTL)
struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev,
const char *postfix);
void btrtl_free(struct btrtl_device_info *btrtl_dev);
int btrtl_download_firmware(struct hci_dev *hdev,
struct btrtl_device_info *btrtl_dev);
int btrtl_setup_realtek(struct hci_dev *hdev);
int btrtl_shutdown_realtek(struct hci_dev *hdev);
int btrtl_get_uart_settings(struct hci_dev *hdev,
struct btrtl_device_info *btrtl_dev,
unsigned int *controller_baudrate,
u32 *device_baudrate, bool *flow_control);
#else
static inline struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev,
const char *postfix)
{
return ERR_PTR(-EOPNOTSUPP);
}
static inline void btrtl_free(struct btrtl_device_info *btrtl_dev)
{
}
static inline int btrtl_download_firmware(struct hci_dev *hdev,
struct btrtl_device_info *btrtl_dev)
{
return -EOPNOTSUPP;
}
static inline int btrtl_setup_realtek(struct hci_dev *hdev)
{
return -EOPNOTSUPP;
}
static inline int btrtl_shutdown_realtek(struct hci_dev *hdev)
{
return -EOPNOTSUPP;
}
static inline int btrtl_get_uart_settings(struct hci_dev *hdev,
struct btrtl_device_info *btrtl_dev,
unsigned int *controller_baudrate,
u32 *device_baudrate,
bool *flow_control)
{
return -ENOENT;
}
#endif