linux/drivers/input/serio/maceps2.c
Bill Pemberton e2619cf78e Input: remove use of __devexit
CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24 00:05:38 -08:00

211 lines
5.4 KiB
C

/*
* SGI O2 MACE PS2 controller driver for linux
*
* Copyright (C) 2002 Vivien Chappelier
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/serio.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/err.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/ip32/mace.h>
#include <asm/ip32/ip32_ints.h>
MODULE_AUTHOR("Vivien Chappelier <vivien.chappelier@linux-mips.org");
MODULE_DESCRIPTION("SGI O2 MACE PS2 controller driver");
MODULE_LICENSE("GPL");
#define MACE_PS2_TIMEOUT 10000 /* in 50us unit */
#define PS2_STATUS_CLOCK_SIGNAL BIT(0) /* external clock signal */
#define PS2_STATUS_CLOCK_INHIBIT BIT(1) /* clken output signal */
#define PS2_STATUS_TX_INPROGRESS BIT(2) /* transmission in progress */
#define PS2_STATUS_TX_EMPTY BIT(3) /* empty transmit buffer */
#define PS2_STATUS_RX_FULL BIT(4) /* full receive buffer */
#define PS2_STATUS_RX_INPROGRESS BIT(5) /* reception in progress */
#define PS2_STATUS_ERROR_PARITY BIT(6) /* parity error */
#define PS2_STATUS_ERROR_FRAMING BIT(7) /* framing error */
#define PS2_CONTROL_TX_CLOCK_DISABLE BIT(0) /* inhibit clock signal after TX */
#define PS2_CONTROL_TX_ENABLE BIT(1) /* transmit enable */
#define PS2_CONTROL_TX_INT_ENABLE BIT(2) /* enable transmit interrupt */
#define PS2_CONTROL_RX_INT_ENABLE BIT(3) /* enable receive interrupt */
#define PS2_CONTROL_RX_CLOCK_ENABLE BIT(4) /* pause reception if set to 0 */
#define PS2_CONTROL_RESET BIT(5) /* reset */
struct maceps2_data {
struct mace_ps2port *port;
int irq;
};
static struct maceps2_data port_data[2];
static struct serio *maceps2_port[2];
static struct platform_device *maceps2_device;
static int maceps2_write(struct serio *dev, unsigned char val)
{
struct mace_ps2port *port = ((struct maceps2_data *)dev->port_data)->port;
unsigned int timeout = MACE_PS2_TIMEOUT;
do {
if (port->status & PS2_STATUS_TX_EMPTY) {
port->tx = val;
return 0;
}
udelay(50);
} while (timeout--);
return -1;
}
static irqreturn_t maceps2_interrupt(int irq, void *dev_id)
{
struct serio *dev = dev_id;
struct mace_ps2port *port = ((struct maceps2_data *)dev->port_data)->port;
unsigned long byte;
if (port->status & PS2_STATUS_RX_FULL) {
byte = port->rx;
serio_interrupt(dev, byte & 0xff, 0);
}
return IRQ_HANDLED;
}
static int maceps2_open(struct serio *dev)
{
struct maceps2_data *data = (struct maceps2_data *)dev->port_data;
if (request_irq(data->irq, maceps2_interrupt, 0, "PS2 port", dev)) {
printk(KERN_ERR "Could not allocate PS/2 IRQ\n");
return -EBUSY;
}
/* Reset port */
data->port->control = PS2_CONTROL_TX_CLOCK_DISABLE | PS2_CONTROL_RESET;
udelay(100);
/* Enable interrupts */
data->port->control = PS2_CONTROL_RX_CLOCK_ENABLE |
PS2_CONTROL_TX_ENABLE |
PS2_CONTROL_RX_INT_ENABLE;
return 0;
}
static void maceps2_close(struct serio *dev)
{
struct maceps2_data *data = (struct maceps2_data *)dev->port_data;
data->port->control = PS2_CONTROL_TX_CLOCK_DISABLE | PS2_CONTROL_RESET;
udelay(100);
free_irq(data->irq, dev);
}
static struct serio *maceps2_allocate_port(int idx)
{
struct serio *serio;
serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
if (serio) {
serio->id.type = SERIO_8042;
serio->write = maceps2_write;
serio->open = maceps2_open;
serio->close = maceps2_close;
snprintf(serio->name, sizeof(serio->name), "MACE PS/2 port%d", idx);
snprintf(serio->phys, sizeof(serio->phys), "mace/serio%d", idx);
serio->port_data = &port_data[idx];
serio->dev.parent = &maceps2_device->dev;
}
return serio;
}
static int maceps2_probe(struct platform_device *dev)
{
maceps2_port[0] = maceps2_allocate_port(0);
maceps2_port[1] = maceps2_allocate_port(1);
if (!maceps2_port[0] || !maceps2_port[1]) {
kfree(maceps2_port[0]);
kfree(maceps2_port[1]);
return -ENOMEM;
}
serio_register_port(maceps2_port[0]);
serio_register_port(maceps2_port[1]);
return 0;
}
static int maceps2_remove(struct platform_device *dev)
{
serio_unregister_port(maceps2_port[0]);
serio_unregister_port(maceps2_port[1]);
return 0;
}
static struct platform_driver maceps2_driver = {
.driver = {
.name = "maceps2",
.owner = THIS_MODULE,
},
.probe = maceps2_probe,
.remove = maceps2_remove,
};
static int __init maceps2_init(void)
{
int error;
error = platform_driver_register(&maceps2_driver);
if (error)
return error;
maceps2_device = platform_device_alloc("maceps2", -1);
if (!maceps2_device) {
error = -ENOMEM;
goto err_unregister_driver;
}
port_data[0].port = &mace->perif.ps2.keyb;
port_data[0].irq = MACEISA_KEYB_IRQ;
port_data[1].port = &mace->perif.ps2.mouse;
port_data[1].irq = MACEISA_MOUSE_IRQ;
error = platform_device_add(maceps2_device);
if (error)
goto err_free_device;
return 0;
err_free_device:
platform_device_put(maceps2_device);
err_unregister_driver:
platform_driver_unregister(&maceps2_driver);
return error;
}
static void __exit maceps2_exit(void)
{
platform_device_unregister(maceps2_device);
platform_driver_unregister(&maceps2_driver);
}
module_init(maceps2_init);
module_exit(maceps2_exit);