linux/drivers/bluetooth/btmtkuart.c
Sean Wang 22eaf6c994 Bluetooth: mediatek: add support for MediaTek MT7663U and MT7668U UART devices
This adds the support of enabling MT7663U and MT7668U Bluetooth function
running on the top of btmtkuart driver.

There are a few differences between MT766[3,8]U and MT7622 where
MT766[3,8]U are standalone devices based on UART transport while MT7622
bluetooth is a built-in device on MediaTek SoC communicating with the host
through BTIF serial transport. Thus, extra setup sequence is necessary
for these standalone devices such as remote regulator and reset control via
GPIO, baud rate changing handshake between the host and device and so on.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-03-02 19:51:23 +01:00

1104 lines
26 KiB
C

// SPDX-License-Identifier: GPL-2.0
// Copyright (c) 2018 MediaTek Inc.
/*
* Bluetooth support for MediaTek serial devices
*
* Author: Sean Wang <sean.wang@mediatek.com>
*
*/
#include <asm/unaligned.h>
#include <linux/atomic.h>
#include <linux/clk.h>
#include <linux/firmware.h>
#include <linux/gpio/consumer.h>
#include <linux/iopoll.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/pinctrl/consumer.h>
#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
#include <linux/serdev.h>
#include <linux/skbuff.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#include "h4_recv.h"
#define VERSION "0.2"
#define FIRMWARE_MT7622 "mediatek/mt7622pr2h.bin"
#define FIRMWARE_MT7663 "mediatek/mt7663pr2h.bin"
#define FIRMWARE_MT7668 "mediatek/mt7668pr2h.bin"
#define MTK_STP_TLR_SIZE 2
#define BTMTKUART_TX_STATE_ACTIVE 1
#define BTMTKUART_TX_STATE_WAKEUP 2
#define BTMTKUART_TX_WAIT_VND_EVT 3
#define BTMTKUART_REQUIRED_WAKEUP 4
#define BTMTKUART_FLAG_STANDALONE_HW BIT(0)
enum {
MTK_WMT_PATCH_DWNLD = 0x1,
MTK_WMT_TEST = 0x2,
MTK_WMT_WAKEUP = 0x3,
MTK_WMT_HIF = 0x4,
MTK_WMT_FUNC_CTRL = 0x6,
MTK_WMT_RST = 0x7,
MTK_WMT_SEMAPHORE = 0x17,
};
enum {
BTMTK_WMT_INVALID,
BTMTK_WMT_PATCH_UNDONE,
BTMTK_WMT_PATCH_DONE,
BTMTK_WMT_ON_UNDONE,
BTMTK_WMT_ON_DONE,
BTMTK_WMT_ON_PROGRESS,
};
struct mtk_stp_hdr {
u8 prefix;
__be16 dlen;
u8 cs;
} __packed;
struct btmtkuart_data {
unsigned int flags;
const char *fwname;
};
struct mtk_wmt_hdr {
u8 dir;
u8 op;
__le16 dlen;
u8 flag;
} __packed;
struct mtk_hci_wmt_cmd {
struct mtk_wmt_hdr hdr;
u8 data[256];
} __packed;
struct btmtk_hci_wmt_evt {
struct hci_event_hdr hhdr;
struct mtk_wmt_hdr whdr;
} __packed;
struct btmtk_hci_wmt_evt_funcc {
struct btmtk_hci_wmt_evt hwhdr;
__be16 status;
} __packed;
struct btmtk_tci_sleep {
u8 mode;
__le16 duration;
__le16 host_duration;
u8 host_wakeup_pin;
u8 time_compensation;
} __packed;
struct btmtk_hci_wmt_params {
u8 op;
u8 flag;
u16 dlen;
const void *data;
u32 *status;
};
struct btmtkuart_dev {
struct hci_dev *hdev;
struct serdev_device *serdev;
struct clk *clk;
struct regulator *vcc;
struct gpio_desc *reset;
struct pinctrl *pinctrl;
struct pinctrl_state *pins_runtime;
struct pinctrl_state *pins_boot;
speed_t desired_speed;
speed_t curr_speed;
struct work_struct tx_work;
unsigned long tx_state;
struct sk_buff_head txq;
struct sk_buff *rx_skb;
struct sk_buff *evt_skb;
u8 stp_pad[6];
u8 stp_cursor;
u16 stp_dlen;
const struct btmtkuart_data *data;
};
#define btmtkuart_is_standalone(bdev) \
((bdev)->data->flags & BTMTKUART_FLAG_STANDALONE_HW)
#define btmtkuart_is_builtin_soc(bdev) \
!((bdev)->data->flags & BTMTKUART_FLAG_STANDALONE_HW)
static int mtk_hci_wmt_sync(struct hci_dev *hdev,
struct btmtk_hci_wmt_params *wmt_params)
{
struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
struct btmtk_hci_wmt_evt_funcc *wmt_evt_funcc;
u32 hlen, status = BTMTK_WMT_INVALID;
struct btmtk_hci_wmt_evt *wmt_evt;
struct mtk_hci_wmt_cmd wc;
struct mtk_wmt_hdr *hdr;
int err;
hlen = sizeof(*hdr) + wmt_params->dlen;
if (hlen > 255)
return -EINVAL;
hdr = (struct mtk_wmt_hdr *)&wc;
hdr->dir = 1;
hdr->op = wmt_params->op;
hdr->dlen = cpu_to_le16(wmt_params->dlen + 1);
hdr->flag = wmt_params->flag;
memcpy(wc.data, wmt_params->data, wmt_params->dlen);
set_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state);
err = __hci_cmd_send(hdev, 0xfc6f, hlen, &wc);
if (err < 0) {
clear_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state);
return err;
}
/* The vendor specific WMT commands are all answered by a vendor
* specific event and will not have the Command Status or Command
* Complete as with usual HCI command flow control.
*
* After sending the command, wait for BTMTKUART_TX_WAIT_VND_EVT
* state to be cleared. The driver specific event receive routine
* will clear that state and with that indicate completion of the
* WMT command.
*/
err = wait_on_bit_timeout(&bdev->tx_state, BTMTKUART_TX_WAIT_VND_EVT,
TASK_INTERRUPTIBLE, HCI_INIT_TIMEOUT);
if (err == -EINTR) {
bt_dev_err(hdev, "Execution of wmt command interrupted");
clear_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state);
return err;
}
if (err) {
bt_dev_err(hdev, "Execution of wmt command timed out");
clear_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state);
return -ETIMEDOUT;
}
/* Parse and handle the return WMT event */
wmt_evt = (struct btmtk_hci_wmt_evt *)bdev->evt_skb->data;
if (wmt_evt->whdr.op != hdr->op) {
bt_dev_err(hdev, "Wrong op received %d expected %d",
wmt_evt->whdr.op, hdr->op);
err = -EIO;
goto err_free_skb;
}
switch (wmt_evt->whdr.op) {
case MTK_WMT_SEMAPHORE:
if (wmt_evt->whdr.flag == 2)
status = BTMTK_WMT_PATCH_UNDONE;
else
status = BTMTK_WMT_PATCH_DONE;
break;
case MTK_WMT_FUNC_CTRL:
wmt_evt_funcc = (struct btmtk_hci_wmt_evt_funcc *)wmt_evt;
if (be16_to_cpu(wmt_evt_funcc->status) == 0x404)
status = BTMTK_WMT_ON_DONE;
else if (be16_to_cpu(wmt_evt_funcc->status) == 0x420)
status = BTMTK_WMT_ON_PROGRESS;
else
status = BTMTK_WMT_ON_UNDONE;
break;
}
if (wmt_params->status)
*wmt_params->status = status;
err_free_skb:
kfree_skb(bdev->evt_skb);
bdev->evt_skb = NULL;
return err;
}
static int mtk_setup_firmware(struct hci_dev *hdev, const char *fwname)
{
struct btmtk_hci_wmt_params wmt_params;
const struct firmware *fw;
const u8 *fw_ptr;
size_t fw_size;
int err, dlen;
u8 flag;
err = request_firmware(&fw, fwname, &hdev->dev);
if (err < 0) {
bt_dev_err(hdev, "Failed to load firmware file (%d)", err);
return err;
}
fw_ptr = fw->data;
fw_size = fw->size;
/* The size of patch header is 30 bytes, should be skip */
if (fw_size < 30) {
err = -EINVAL;
goto free_fw;
}
fw_size -= 30;
fw_ptr += 30;
flag = 1;
wmt_params.op = MTK_WMT_PATCH_DWNLD;
wmt_params.status = NULL;
while (fw_size > 0) {
dlen = min_t(int, 250, fw_size);
/* Tell device the position in sequence */
if (fw_size - dlen <= 0)
flag = 3;
else if (fw_size < fw->size - 30)
flag = 2;
wmt_params.flag = flag;
wmt_params.dlen = dlen;
wmt_params.data = fw_ptr;
err = mtk_hci_wmt_sync(hdev, &wmt_params);
if (err < 0) {
bt_dev_err(hdev, "Failed to send wmt patch dwnld (%d)",
err);
goto free_fw;
}
fw_size -= dlen;
fw_ptr += dlen;
}
wmt_params.op = MTK_WMT_RST;
wmt_params.flag = 4;
wmt_params.dlen = 0;
wmt_params.data = NULL;
wmt_params.status = NULL;
/* Activate funciton the firmware providing to */
err = mtk_hci_wmt_sync(hdev, &wmt_params);
if (err < 0) {
bt_dev_err(hdev, "Failed to send wmt rst (%d)", err);
goto free_fw;
}
/* Wait a few moments for firmware activation done */
usleep_range(10000, 12000);
free_fw:
release_firmware(fw);
return err;
}
static int btmtkuart_recv_event(struct hci_dev *hdev, struct sk_buff *skb)
{
struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
struct hci_event_hdr *hdr = (void *)skb->data;
int err;
/* Fix up the vendor event id with 0xff for vendor specific instead
* of 0xe4 so that event send via monitoring socket can be parsed
* properly.
*/
if (hdr->evt == 0xe4)
hdr->evt = HCI_EV_VENDOR;
/* When someone waits for the WMT event, the skb is being cloned
* and being processed the events from there then.
*/
if (test_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state)) {
bdev->evt_skb = skb_clone(skb, GFP_KERNEL);
if (!bdev->evt_skb) {
err = -ENOMEM;
goto err_out;
}
}
err = hci_recv_frame(hdev, skb);
if (err < 0)
goto err_free_skb;
if (hdr->evt == HCI_EV_VENDOR) {
if (test_and_clear_bit(BTMTKUART_TX_WAIT_VND_EVT,
&bdev->tx_state)) {
/* Barrier to sync with other CPUs */
smp_mb__after_atomic();
wake_up_bit(&bdev->tx_state, BTMTKUART_TX_WAIT_VND_EVT);
}
}
return 0;
err_free_skb:
kfree_skb(bdev->evt_skb);
bdev->evt_skb = NULL;
err_out:
return err;
}
static const struct h4_recv_pkt mtk_recv_pkts[] = {
{ H4_RECV_ACL, .recv = hci_recv_frame },
{ H4_RECV_SCO, .recv = hci_recv_frame },
{ H4_RECV_EVENT, .recv = btmtkuart_recv_event },
};
static void btmtkuart_tx_work(struct work_struct *work)
{
struct btmtkuart_dev *bdev = container_of(work, struct btmtkuart_dev,
tx_work);
struct serdev_device *serdev = bdev->serdev;
struct hci_dev *hdev = bdev->hdev;
while (1) {
clear_bit(BTMTKUART_TX_STATE_WAKEUP, &bdev->tx_state);
while (1) {
struct sk_buff *skb = skb_dequeue(&bdev->txq);
int len;
if (!skb)
break;
len = serdev_device_write_buf(serdev, skb->data,
skb->len);
hdev->stat.byte_tx += len;
skb_pull(skb, len);
if (skb->len > 0) {
skb_queue_head(&bdev->txq, skb);
break;
}
switch (hci_skb_pkt_type(skb)) {
case HCI_COMMAND_PKT:
hdev->stat.cmd_tx++;
break;
case HCI_ACLDATA_PKT:
hdev->stat.acl_tx++;
break;
case HCI_SCODATA_PKT:
hdev->stat.sco_tx++;
break;
}
kfree_skb(skb);
}
if (!test_bit(BTMTKUART_TX_STATE_WAKEUP, &bdev->tx_state))
break;
}
clear_bit(BTMTKUART_TX_STATE_ACTIVE, &bdev->tx_state);
}
static void btmtkuart_tx_wakeup(struct btmtkuart_dev *bdev)
{
if (test_and_set_bit(BTMTKUART_TX_STATE_ACTIVE, &bdev->tx_state))
set_bit(BTMTKUART_TX_STATE_WAKEUP, &bdev->tx_state);
schedule_work(&bdev->tx_work);
}
static const unsigned char *
mtk_stp_split(struct btmtkuart_dev *bdev, const unsigned char *data, int count,
int *sz_h4)
{
struct mtk_stp_hdr *shdr;
/* The cursor is reset when all the data of STP is consumed out */
if (!bdev->stp_dlen && bdev->stp_cursor >= 6)
bdev->stp_cursor = 0;
/* Filling pad until all STP info is obtained */
while (bdev->stp_cursor < 6 && count > 0) {
bdev->stp_pad[bdev->stp_cursor] = *data;
bdev->stp_cursor++;
data++;
count--;
}
/* Retrieve STP info and have a sanity check */
if (!bdev->stp_dlen && bdev->stp_cursor >= 6) {
shdr = (struct mtk_stp_hdr *)&bdev->stp_pad[2];
bdev->stp_dlen = be16_to_cpu(shdr->dlen) & 0x0fff;
/* Resync STP when unexpected data is being read */
if (shdr->prefix != 0x80 || bdev->stp_dlen > 2048) {
bt_dev_err(bdev->hdev, "stp format unexpect (%d, %d)",
shdr->prefix, bdev->stp_dlen);
bdev->stp_cursor = 2;
bdev->stp_dlen = 0;
}
}
/* Directly quit when there's no data found for H4 can process */
if (count <= 0)
return NULL;
/* Tranlate to how much the size of data H4 can handle so far */
*sz_h4 = min_t(int, count, bdev->stp_dlen);
/* Update the remaining size of STP packet */
bdev->stp_dlen -= *sz_h4;
/* Data points to STP payload which can be handled by H4 */
return data;
}
static int btmtkuart_recv(struct hci_dev *hdev, const u8 *data, size_t count)
{
struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
const unsigned char *p_left = data, *p_h4;
int sz_left = count, sz_h4, adv;
int err;
while (sz_left > 0) {
/* The serial data received from MT7622 BT controller is
* at all time padded around with the STP header and tailer.
*
* A full STP packet is looking like
* -----------------------------------
* | STP header | H:4 | STP tailer |
* -----------------------------------
* but it doesn't guarantee to contain a full H:4 packet which
* means that it's possible for multiple STP packets forms a
* full H:4 packet that means extra STP header + length doesn't
* indicate a full H:4 frame, things can fragment. Whose length
* recorded in STP header just shows up the most length the
* H:4 engine can handle currently.
*/
p_h4 = mtk_stp_split(bdev, p_left, sz_left, &sz_h4);
if (!p_h4)
break;
adv = p_h4 - p_left;
sz_left -= adv;
p_left += adv;
bdev->rx_skb = h4_recv_buf(bdev->hdev, bdev->rx_skb, p_h4,
sz_h4, mtk_recv_pkts,
ARRAY_SIZE(mtk_recv_pkts));
if (IS_ERR(bdev->rx_skb)) {
err = PTR_ERR(bdev->rx_skb);
bt_dev_err(bdev->hdev,
"Frame reassembly failed (%d)", err);
bdev->rx_skb = NULL;
return err;
}
sz_left -= sz_h4;
p_left += sz_h4;
}
return 0;
}
static int btmtkuart_receive_buf(struct serdev_device *serdev, const u8 *data,
size_t count)
{
struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev);
int err;
err = btmtkuart_recv(bdev->hdev, data, count);
if (err < 0)
return err;
bdev->hdev->stat.byte_rx += count;
return count;
}
static void btmtkuart_write_wakeup(struct serdev_device *serdev)
{
struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev);
btmtkuart_tx_wakeup(bdev);
}
static const struct serdev_device_ops btmtkuart_client_ops = {
.receive_buf = btmtkuart_receive_buf,
.write_wakeup = btmtkuart_write_wakeup,
};
static int btmtkuart_open(struct hci_dev *hdev)
{
struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
struct device *dev;
int err;
err = serdev_device_open(bdev->serdev);
if (err) {
bt_dev_err(hdev, "Unable to open UART device %s",
dev_name(&bdev->serdev->dev));
goto err_open;
}
if (btmtkuart_is_standalone(bdev)) {
if (bdev->curr_speed != bdev->desired_speed)
err = serdev_device_set_baudrate(bdev->serdev,
115200);
else
err = serdev_device_set_baudrate(bdev->serdev,
bdev->desired_speed);
if (err < 0) {
bt_dev_err(hdev, "Unable to set baudrate UART device %s",
dev_name(&bdev->serdev->dev));
goto err_serdev_close;
}
serdev_device_set_flow_control(bdev->serdev, false);
}
bdev->stp_cursor = 2;
bdev->stp_dlen = 0;
dev = &bdev->serdev->dev;
/* Enable the power domain and clock the device requires */
pm_runtime_enable(dev);
err = pm_runtime_get_sync(dev);
if (err < 0) {
pm_runtime_put_noidle(dev);
goto err_disable_rpm;
}
err = clk_prepare_enable(bdev->clk);
if (err < 0)
goto err_put_rpm;
return 0;
err_put_rpm:
pm_runtime_put_sync(dev);
err_disable_rpm:
pm_runtime_disable(dev);
err_serdev_close:
serdev_device_close(bdev->serdev);
err_open:
return err;
}
static int btmtkuart_close(struct hci_dev *hdev)
{
struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
struct device *dev = &bdev->serdev->dev;
/* Shutdown the clock and power domain the device requires */
clk_disable_unprepare(bdev->clk);
pm_runtime_put_sync(dev);
pm_runtime_disable(dev);
serdev_device_close(bdev->serdev);
return 0;
}
static int btmtkuart_flush(struct hci_dev *hdev)
{
struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
/* Flush any pending characters */
serdev_device_write_flush(bdev->serdev);
skb_queue_purge(&bdev->txq);
cancel_work_sync(&bdev->tx_work);
kfree_skb(bdev->rx_skb);
bdev->rx_skb = NULL;
bdev->stp_cursor = 2;
bdev->stp_dlen = 0;
return 0;
}
static int btmtkuart_func_query(struct hci_dev *hdev)
{
struct btmtk_hci_wmt_params wmt_params;
int status, err;
u8 param = 0;
/* Query whether the function is enabled */
wmt_params.op = MTK_WMT_FUNC_CTRL;
wmt_params.flag = 4;
wmt_params.dlen = sizeof(param);
wmt_params.data = &param;
wmt_params.status = &status;
err = mtk_hci_wmt_sync(hdev, &wmt_params);
if (err < 0) {
bt_dev_err(hdev, "Failed to query function status (%d)", err);
return err;
}
return status;
}
static int btmtkuart_change_baudrate(struct hci_dev *hdev)
{
struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
struct btmtk_hci_wmt_params wmt_params;
u32 baudrate;
u8 param;
int err;
/* Indicate the device to enter the probe state the host is
* ready to change a new baudrate.
*/
baudrate = cpu_to_le32(bdev->desired_speed);
wmt_params.op = MTK_WMT_HIF;
wmt_params.flag = 1;
wmt_params.dlen = 4;
wmt_params.data = &baudrate;
wmt_params.status = NULL;
err = mtk_hci_wmt_sync(hdev, &wmt_params);
if (err < 0) {
bt_dev_err(hdev, "Failed to device baudrate (%d)", err);
return err;
}
err = serdev_device_set_baudrate(bdev->serdev,
bdev->desired_speed);
if (err < 0) {
bt_dev_err(hdev, "Failed to set up host baudrate (%d)",
err);
return err;
}
serdev_device_set_flow_control(bdev->serdev, false);
/* Send a dummy byte 0xff to activate the new baudrate */
param = 0xff;
err = serdev_device_write(bdev->serdev, &param, sizeof(param),
MAX_SCHEDULE_TIMEOUT);
if (err < 0 || err < sizeof(param))
return err;
serdev_device_wait_until_sent(bdev->serdev, 0);
/* Wait some time for the device changing baudrate done */
usleep_range(20000, 22000);
/* Test the new baudrate */
wmt_params.op = MTK_WMT_TEST;
wmt_params.flag = 7;
wmt_params.dlen = 0;
wmt_params.data = NULL;
wmt_params.status = NULL;
err = mtk_hci_wmt_sync(hdev, &wmt_params);
if (err < 0) {
bt_dev_err(hdev, "Failed to test new baudrate (%d)",
err);
return err;
}
bdev->curr_speed = bdev->desired_speed;
return 0;
}
static int btmtkuart_setup(struct hci_dev *hdev)
{
struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
struct btmtk_hci_wmt_params wmt_params;
ktime_t calltime, delta, rettime;
struct btmtk_tci_sleep tci_sleep;
unsigned long long duration;
struct sk_buff *skb;
int err, status;
u8 param = 0x1;
calltime = ktime_get();
/* Wakeup MCUSYS is required for certain devices before we start to
* do any setups.
*/
if (test_bit(BTMTKUART_REQUIRED_WAKEUP, &bdev->tx_state)) {
wmt_params.op = MTK_WMT_WAKEUP;
wmt_params.flag = 3;
wmt_params.dlen = 0;
wmt_params.data = NULL;
wmt_params.status = NULL;
err = mtk_hci_wmt_sync(hdev, &wmt_params);
if (err < 0) {
bt_dev_err(hdev, "Failed to wakeup the chip (%d)", err);
return err;
}
clear_bit(BTMTKUART_REQUIRED_WAKEUP, &bdev->tx_state);
}
if (btmtkuart_is_standalone(bdev))
btmtkuart_change_baudrate(hdev);
/* Query whether the firmware is already download */
wmt_params.op = MTK_WMT_SEMAPHORE;
wmt_params.flag = 1;
wmt_params.dlen = 0;
wmt_params.data = NULL;
wmt_params.status = &status;
err = mtk_hci_wmt_sync(hdev, &wmt_params);
if (err < 0) {
bt_dev_err(hdev, "Failed to query firmware status (%d)", err);
return err;
}
if (status == BTMTK_WMT_PATCH_DONE) {
bt_dev_info(hdev, "Firmware already downloaded");
goto ignore_setup_fw;
}
/* Setup a firmware which the device definitely requires */
err = mtk_setup_firmware(hdev, bdev->data->fwname);
if (err < 0)
return err;
ignore_setup_fw:
/* Query whether the device is already enabled */
err = readx_poll_timeout(btmtkuart_func_query, hdev, status,
status < 0 || status != BTMTK_WMT_ON_PROGRESS,
2000, 5000000);
/* -ETIMEDOUT happens */
if (err < 0)
return err;
/* The other errors happen in btusb_mtk_func_query */
if (status < 0)
return status;
if (status == BTMTK_WMT_ON_DONE) {
bt_dev_info(hdev, "function already on");
goto ignore_func_on;
}
/* Enable Bluetooth protocol */
wmt_params.op = MTK_WMT_FUNC_CTRL;
wmt_params.flag = 0;
wmt_params.dlen = sizeof(param);
wmt_params.data = &param;
wmt_params.status = NULL;
err = mtk_hci_wmt_sync(hdev, &wmt_params);
if (err < 0) {
bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err);
return err;
}
ignore_func_on:
/* Apply the low power environment setup */
tci_sleep.mode = 0x5;
tci_sleep.duration = cpu_to_le16(0x640);
tci_sleep.host_duration = cpu_to_le16(0x640);
tci_sleep.host_wakeup_pin = 0;
tci_sleep.time_compensation = 0;
skb = __hci_cmd_sync(hdev, 0xfc7a, sizeof(tci_sleep), &tci_sleep,
HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
err = PTR_ERR(skb);
bt_dev_err(hdev, "Failed to apply low power setting (%d)", err);
return err;
}
kfree_skb(skb);
rettime = ktime_get();
delta = ktime_sub(rettime, calltime);
duration = (unsigned long long)ktime_to_ns(delta) >> 10;
bt_dev_info(hdev, "Device setup in %llu usecs", duration);
return 0;
}
static int btmtkuart_shutdown(struct hci_dev *hdev)
{
struct btmtk_hci_wmt_params wmt_params;
u8 param = 0x0;
int err;
/* Disable the device */
wmt_params.op = MTK_WMT_FUNC_CTRL;
wmt_params.flag = 0;
wmt_params.dlen = sizeof(param);
wmt_params.data = &param;
wmt_params.status = NULL;
err = mtk_hci_wmt_sync(hdev, &wmt_params);
if (err < 0) {
bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err);
return err;
}
return 0;
}
static int btmtkuart_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
{
struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
struct mtk_stp_hdr *shdr;
int err, dlen, type = 0;
/* Prepend skb with frame type */
memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
/* Make sure that there is enough rooms for STP header and trailer */
if (unlikely(skb_headroom(skb) < sizeof(*shdr)) ||
(skb_tailroom(skb) < MTK_STP_TLR_SIZE)) {
err = pskb_expand_head(skb, sizeof(*shdr), MTK_STP_TLR_SIZE,
GFP_ATOMIC);
if (err < 0)
return err;
}
/* Add the STP header */
dlen = skb->len;
shdr = skb_push(skb, sizeof(*shdr));
shdr->prefix = 0x80;
shdr->dlen = cpu_to_be16((dlen & 0x0fff) | (type << 12));
shdr->cs = 0; /* MT7622 doesn't care about checksum value */
/* Add the STP trailer */
skb_put_zero(skb, MTK_STP_TLR_SIZE);
skb_queue_tail(&bdev->txq, skb);
btmtkuart_tx_wakeup(bdev);
return 0;
}
static int btmtkuart_parse_dt(struct serdev_device *serdev)
{
struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev);
struct device_node *node = serdev->dev.of_node;
u32 speed = 921600;
int err;
if (btmtkuart_is_standalone(bdev)) {
of_property_read_u32(node, "current-speed", &speed);
bdev->desired_speed = speed;
bdev->vcc = devm_regulator_get(&serdev->dev, "vcc");
if (IS_ERR(bdev->vcc)) {
err = PTR_ERR(bdev->vcc);
return err;
}
bdev->pinctrl = devm_pinctrl_get(&serdev->dev);
if (IS_ERR(bdev->pinctrl)) {
err = PTR_ERR(bdev->pinctrl);
return err;
}
bdev->pins_boot = pinctrl_lookup_state(bdev->pinctrl,
"default");
if (IS_ERR(bdev->pins_boot)) {
err = PTR_ERR(bdev->pins_boot);
return err;
}
bdev->pins_runtime = pinctrl_lookup_state(bdev->pinctrl,
"runtime");
if (IS_ERR(bdev->pins_runtime)) {
err = PTR_ERR(bdev->pins_runtime);
return err;
}
bdev->reset = devm_gpiod_get_optional(&serdev->dev, "reset",
GPIOD_OUT_LOW);
if (IS_ERR(bdev->reset)) {
err = PTR_ERR(bdev->reset);
return err;
}
} else if (btmtkuart_is_builtin_soc(bdev)) {
bdev->clk = devm_clk_get(&serdev->dev, "ref");
if (IS_ERR(bdev->clk))
return PTR_ERR(bdev->clk);
}
return 0;
}
static int btmtkuart_probe(struct serdev_device *serdev)
{
struct btmtkuart_dev *bdev;
struct hci_dev *hdev;
int err;
bdev = devm_kzalloc(&serdev->dev, sizeof(*bdev), GFP_KERNEL);
if (!bdev)
return -ENOMEM;
bdev->data = of_device_get_match_data(&serdev->dev);
if (!bdev->data)
return -ENODEV;
bdev->serdev = serdev;
serdev_device_set_drvdata(serdev, bdev);
serdev_device_set_client_ops(serdev, &btmtkuart_client_ops);
err = btmtkuart_parse_dt(serdev);
if (err < 0)
return err;
INIT_WORK(&bdev->tx_work, btmtkuart_tx_work);
skb_queue_head_init(&bdev->txq);
/* Initialize and register HCI device */
hdev = hci_alloc_dev();
if (!hdev) {
dev_err(&serdev->dev, "Can't allocate HCI device\n");
return -ENOMEM;
}
bdev->hdev = hdev;
hdev->bus = HCI_UART;
hci_set_drvdata(hdev, bdev);
hdev->open = btmtkuart_open;
hdev->close = btmtkuart_close;
hdev->flush = btmtkuart_flush;
hdev->setup = btmtkuart_setup;
hdev->shutdown = btmtkuart_shutdown;
hdev->send = btmtkuart_send_frame;
SET_HCIDEV_DEV(hdev, &serdev->dev);
hdev->manufacturer = 70;
set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
if (btmtkuart_is_standalone(bdev)) {
/* Switch to the specific pin state for the booting requires */
pinctrl_select_state(bdev->pinctrl, bdev->pins_boot);
/* Power on */
err = regulator_enable(bdev->vcc);
if (err < 0)
return err;
/* Reset if the reset-gpios is available otherwise the board
* -level design should be guaranteed.
*/
if (bdev->reset) {
gpiod_set_value_cansleep(bdev->reset, 1);
usleep_range(1000, 2000);
gpiod_set_value_cansleep(bdev->reset, 0);
}
/* Wait some time until device got ready and switch to the pin
* mode the device requires for UART transfers.
*/
msleep(50);
pinctrl_select_state(bdev->pinctrl, bdev->pins_runtime);
/* A standalone device doesn't depends on power domain on SoC,
* so mark it as no callbacks.
*/
pm_runtime_no_callbacks(&serdev->dev);
set_bit(BTMTKUART_REQUIRED_WAKEUP, &bdev->tx_state);
}
err = hci_register_dev(hdev);
if (err < 0) {
dev_err(&serdev->dev, "Can't register HCI device\n");
hci_free_dev(hdev);
goto err_regulator_disable;
}
return 0;
err_regulator_disable:
if (btmtkuart_is_standalone(bdev)) {
pinctrl_select_state(bdev->pinctrl, bdev->pins_boot);
regulator_disable(bdev->vcc);
}
return err;
}
static void btmtkuart_remove(struct serdev_device *serdev)
{
struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev);
struct hci_dev *hdev = bdev->hdev;
if (btmtkuart_is_standalone(bdev)) {
pinctrl_select_state(bdev->pinctrl, bdev->pins_boot);
regulator_disable(bdev->vcc);
}
hci_unregister_dev(hdev);
hci_free_dev(hdev);
}
static const struct btmtkuart_data mt7622_data = {
.fwname = FIRMWARE_MT7622,
};
static const struct btmtkuart_data mt7663_data = {
.flags = BTMTKUART_FLAG_STANDALONE_HW,
.fwname = FIRMWARE_MT7663,
};
static const struct btmtkuart_data mt7668_data = {
.flags = BTMTKUART_FLAG_STANDALONE_HW,
.fwname = FIRMWARE_MT7668,
};
#ifdef CONFIG_OF
static const struct of_device_id mtk_of_match_table[] = {
{ .compatible = "mediatek,mt7622-bluetooth", .data = &mt7622_data},
{ .compatible = "mediatek,mt7663u-bluetooth", .data = &mt7663_data},
{ .compatible = "mediatek,mt7668u-bluetooth", .data = &mt7668_data},
{ }
};
MODULE_DEVICE_TABLE(of, mtk_of_match_table);
#endif
static struct serdev_device_driver btmtkuart_driver = {
.probe = btmtkuart_probe,
.remove = btmtkuart_remove,
.driver = {
.name = "btmtkuart",
.of_match_table = of_match_ptr(mtk_of_match_table),
},
};
module_serdev_device_driver(btmtkuart_driver);
MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
MODULE_DESCRIPTION("MediaTek Bluetooth Serial driver ver " VERSION);
MODULE_VERSION(VERSION);
MODULE_LICENSE("GPL");
MODULE_FIRMWARE(FIRMWARE_MT7622);
MODULE_FIRMWARE(FIRMWARE_MT7663);
MODULE_FIRMWARE(FIRMWARE_MT7668);