linux/arch/arm/mach-s3c2443/clock.c
Yauhen Kharuzhy 95d6791b4f ARM: S3C24XX: Add address map and clock definitions for HSMMC0
Define maps for HSMMC devices.

S3C2443 has one HSMMC device with base address 0x4A800000.
S3C2416 has HSMMC0 at 0x4AC00000 and HSMMC1 at 0x4A800000.

So suppose that S3C2443 has only HSMMC1.

Define clock for hsmmc0 device and register it.

Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-06 14:09:18 +09:00

377 lines
8.9 KiB
C

/* linux/arch/arm/mach-s3c2443/clock.c
*
* Copyright (c) 2007, 2010 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2443 Clock control support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/sysdev.h>
#include <linux/clk.h>
#include <linux/mutex.h>
#include <linux/serial_core.h>
#include <linux/io.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <mach/regs-s3c2443-clock.h>
#include <plat/cpu-freq.h>
#include <plat/s3c2443.h>
#include <plat/clock.h>
#include <plat/clock-clksrc.h>
#include <plat/cpu.h>
/* We currently have to assume that the system is running
* from the XTPll input, and that all ***REFCLKs are being
* fed from it, as we cannot read the state of OM[4] from
* software.
*
* It would be possible for each board initialisation to
* set the correct muxing at initialisation
*/
/* clock selections */
static struct clk clk_i2s_ext = {
.name = "i2s-ext",
.id = -1,
};
/* armdiv
*
* this clock is sourced from msysclk and can have a number of
* divider values applied to it to then be fed into armclk.
*/
/* armdiv divisor table */
static unsigned int armdiv[16] = {
[S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 1,
[S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 2,
[S3C2443_CLKDIV0_ARMDIV_3 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 3,
[S3C2443_CLKDIV0_ARMDIV_4 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 4,
[S3C2443_CLKDIV0_ARMDIV_6 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 6,
[S3C2443_CLKDIV0_ARMDIV_8 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 8,
[S3C2443_CLKDIV0_ARMDIV_12 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 12,
[S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 16,
};
static inline unsigned int s3c2443_fclk_div(unsigned long clkcon0)
{
clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT];
}
static unsigned long s3c2443_armclk_roundrate(struct clk *clk,
unsigned long rate)
{
unsigned long parent = clk_get_rate(clk->parent);
unsigned long calc;
unsigned best = 256; /* bigger than any value */
unsigned div;
int ptr;
for (ptr = 0; ptr < ARRAY_SIZE(armdiv); ptr++) {
div = armdiv[ptr];
calc = parent / div;
if (calc <= rate && div < best)
best = div;
}
return parent / best;
}
static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
{
unsigned long parent = clk_get_rate(clk->parent);
unsigned long calc;
unsigned div;
unsigned best = 256; /* bigger than any value */
int ptr;
int val = -1;
for (ptr = 0; ptr < ARRAY_SIZE(armdiv); ptr++) {
div = armdiv[ptr];
calc = parent / div;
if (calc <= rate && div < best) {
best = div;
val = ptr;
}
}
if (val >= 0) {
unsigned long clkcon0;
clkcon0 = __raw_readl(S3C2443_CLKDIV0);
clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
__raw_writel(clkcon0, S3C2443_CLKDIV0);
}
return (val == -1) ? -EINVAL : 0;
}
static struct clk clk_armdiv = {
.name = "armdiv",
.id = -1,
.parent = &clk_msysclk.clk,
.ops = &(struct clk_ops) {
.round_rate = s3c2443_armclk_roundrate,
.set_rate = s3c2443_armclk_setrate,
},
};
/* armclk
*
* this is the clock fed into the ARM core itself, from armdiv or from hclk.
*/
static struct clk *clk_arm_sources[] = {
[0] = &clk_armdiv,
[1] = &clk_h,
};
static struct clksrc_clk clk_arm = {
.clk = {
.name = "armclk",
.id = -1,
},
.sources = &(struct clksrc_sources) {
.sources = clk_arm_sources,
.nr_sources = ARRAY_SIZE(clk_arm_sources),
},
.reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 },
};
/* hsspi
*
* high-speed spi clock, sourced from esysclk
*/
static struct clksrc_clk clk_hsspi = {
.clk = {
.name = "hsspi",
.id = -1,
.parent = &clk_esysclk.clk,
.ctrlbit = S3C2443_SCLKCON_HSSPICLK,
.enable = s3c2443_clkcon_enable_s,
},
.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
};
/* clk_hsmcc_div
*
* this clock is sourced from epll, and is fed through a divider,
* to a mux controlled by sclkcon where either it or a extclk can
* be fed to the hsmmc block
*/
static struct clksrc_clk clk_hsmmc_div = {
.clk = {
.name = "hsmmc-div",
.id = 1,
.parent = &clk_esysclk.clk,
},
.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 },
};
static int s3c2443_setparent_hsmmc(struct clk *clk, struct clk *parent)
{
unsigned long clksrc = __raw_readl(S3C2443_SCLKCON);
clksrc &= ~(S3C2443_SCLKCON_HSMMCCLK_EXT |
S3C2443_SCLKCON_HSMMCCLK_EPLL);
if (parent == &clk_epll)
clksrc |= S3C2443_SCLKCON_HSMMCCLK_EPLL;
else if (parent == &clk_ext)
clksrc |= S3C2443_SCLKCON_HSMMCCLK_EXT;
else
return -EINVAL;
if (clk->usage > 0) {
__raw_writel(clksrc, S3C2443_SCLKCON);
}
clk->parent = parent;
return 0;
}
static int s3c2443_enable_hsmmc(struct clk *clk, int enable)
{
return s3c2443_setparent_hsmmc(clk, clk->parent);
}
static struct clk clk_hsmmc = {
.name = "hsmmc-if",
.id = 1,
.parent = &clk_hsmmc_div.clk,
.enable = s3c2443_enable_hsmmc,
.ops = &(struct clk_ops) {
.set_parent = s3c2443_setparent_hsmmc,
},
};
/* i2s_eplldiv
*
* This clock is the output from the I2S divisor of ESYSCLK, and is separate
* from the mux that comes after it (cannot merge into one single clock)
*/
static struct clksrc_clk clk_i2s_eplldiv = {
.clk = {
.name = "i2s-eplldiv",
.id = -1,
.parent = &clk_esysclk.clk,
},
.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, },
};
/* i2s-ref
*
* i2s bus reference clock, selectable from external, esysclk or epllref
*
* Note, this used to be two clocks, but was compressed into one.
*/
struct clk *clk_i2s_srclist[] = {
[0] = &clk_i2s_eplldiv.clk,
[1] = &clk_i2s_ext,
[2] = &clk_epllref.clk,
[3] = &clk_epllref.clk,
};
static struct clksrc_clk clk_i2s = {
.clk = {
.name = "i2s-if",
.id = -1,
.ctrlbit = S3C2443_SCLKCON_I2SCLK,
.enable = s3c2443_clkcon_enable_s,
},
.sources = &(struct clksrc_sources) {
.sources = clk_i2s_srclist,
.nr_sources = ARRAY_SIZE(clk_i2s_srclist),
},
.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 },
};
/* standard clock definitions */
static struct clk init_clocks_off[] = {
{
.name = "sdi",
.id = -1,
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_SDI,
}, {
.name = "iis",
.id = -1,
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_IIS,
}, {
.name = "spi",
.id = 0,
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_SPI0,
}, {
.name = "spi",
.id = 1,
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_SPI1,
}
};
static struct clk init_clocks[] = {
};
/* clocks to add straight away */
static struct clksrc_clk *clksrcs[] __initdata = {
&clk_arm,
&clk_i2s_eplldiv,
&clk_i2s,
&clk_hsspi,
&clk_hsmmc_div,
};
static struct clk *clks[] __initdata = {
&clk_hsmmc,
&clk_armdiv,
};
void __init_or_cpufreq s3c2443_setup_clocks(void)
{
s3c2443_common_setup_clocks(s3c2443_get_mpll, s3c2443_fclk_div);
}
void __init s3c2443_init_clocks(int xtal)
{
unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
int ptr;
clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
clk_epll.parent = &clk_epllref.clk;
s3c2443_common_init_clocks(xtal, s3c2443_get_mpll, s3c2443_fclk_div);
s3c2443_setup_clocks();
s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
s3c_register_clksrc(clksrcs[ptr], 1);
/* register clocks from clock array */
s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
/* We must be careful disabling the clocks we are not intending to
* be using at boot time, as subsystems such as the LCD which do
* their own DMA requests to the bus can cause the system to lockup
* if they where in the middle of requesting bus access.
*
* Disabling the LCD clock if the LCD is active is very dangerous,
* and therefore the bootloader should be careful to not enable
* the LCD clock if it is not needed.
*/
/* install (and disable) the clocks we do not need immediately */
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_pwmclk_init();
}