mirror of
https://github.com/torvalds/linux
synced 2024-09-25 05:50:57 +00:00
20f18ff32f
The Arcom/Eurotech Viper needs some extra care to run. On this board, the PC104 connector is actually wired to the second PCMCIA slot. Therefore, this second socket needs to be enabled, despite not being managed by the PCMCIA code. I'd rather have the MECR setup in the platform support code so I could, for example, use the PC104 bus without having the PCMCIA module loaded. Signed-off-by: Marc Zyngier <marc.zyngier@altran.com>
78 lines
2.9 KiB
Makefile
78 lines
2.9 KiB
Makefile
#
|
|
# Makefile for the kernel pcmcia subsystem (c/o David Hinds)
|
|
#
|
|
|
|
ifeq ($(CONFIG_PCMCIA_DEBUG),y)
|
|
EXTRA_CFLAGS += -DDEBUG
|
|
endif
|
|
|
|
pcmcia_core-y += cs.o cistpl.o rsrc_mgr.o socket_sysfs.o
|
|
pcmcia_core-$(CONFIG_CARDBUS) += cardbus.o
|
|
obj-$(CONFIG_PCCARD) += pcmcia_core.o
|
|
|
|
pcmcia-y += ds.o pcmcia_resource.o
|
|
pcmcia-$(CONFIG_PCMCIA_IOCTL) += pcmcia_ioctl.o
|
|
obj-$(CONFIG_PCMCIA) += pcmcia.o
|
|
|
|
obj-$(CONFIG_PCCARD_NONSTATIC) += rsrc_nonstatic.o
|
|
|
|
|
|
# socket drivers
|
|
|
|
obj-$(CONFIG_YENTA) += yenta_socket.o
|
|
|
|
obj-$(CONFIG_PD6729) += pd6729.o
|
|
obj-$(CONFIG_I82365) += i82365.o
|
|
obj-$(CONFIG_I82092) += i82092.o
|
|
obj-$(CONFIG_TCIC) += tcic.o
|
|
obj-$(CONFIG_PCMCIA_M8XX) += m8xx_pcmcia.o
|
|
obj-$(CONFIG_HD64465_PCMCIA) += hd64465_ss.o
|
|
obj-$(CONFIG_PCMCIA_SA1100) += sa11xx_core.o sa1100_cs.o
|
|
obj-$(CONFIG_PCMCIA_SA1111) += sa11xx_core.o sa1111_cs.o
|
|
obj-$(CONFIG_PCMCIA_PXA2XX) += pxa2xx_core.o pxa2xx_cs.o
|
|
obj-$(CONFIG_M32R_PCC) += m32r_pcc.o
|
|
obj-$(CONFIG_M32R_CFC) += m32r_cfc.o
|
|
obj-$(CONFIG_PCMCIA_AU1X00) += au1x00_ss.o
|
|
obj-$(CONFIG_PCMCIA_VRC4171) += vrc4171_card.o
|
|
obj-$(CONFIG_PCMCIA_VRC4173) += vrc4173_cardu.o
|
|
obj-$(CONFIG_OMAP_CF) += omap_cf.o
|
|
obj-$(CONFIG_BFIN_CFPCMCIA) += bfin_cf_pcmcia.o
|
|
obj-$(CONFIG_AT91_CF) += at91_cf.o
|
|
obj-$(CONFIG_ELECTRA_CF) += electra_cf.o
|
|
|
|
sa11xx_core-y += soc_common.o sa11xx_base.o
|
|
pxa2xx_core-y += soc_common.o pxa2xx_base.o
|
|
|
|
au1x00_ss-y += au1000_generic.o
|
|
au1x00_ss-$(CONFIG_MIPS_PB1000) += au1000_pb1x00.o
|
|
au1x00_ss-$(CONFIG_MIPS_PB1100) += au1000_pb1x00.o
|
|
au1x00_ss-$(CONFIG_MIPS_PB1200) += au1000_db1x00.o
|
|
au1x00_ss-$(CONFIG_MIPS_PB1500) += au1000_pb1x00.o
|
|
au1x00_ss-$(CONFIG_MIPS_DB1000) += au1000_db1x00.o
|
|
au1x00_ss-$(CONFIG_MIPS_DB1100) += au1000_db1x00.o
|
|
au1x00_ss-$(CONFIG_MIPS_DB1200) += au1000_db1x00.o
|
|
au1x00_ss-$(CONFIG_MIPS_DB1500) += au1000_db1x00.o
|
|
au1x00_ss-$(CONFIG_MIPS_DB1550) += au1000_db1x00.o
|
|
au1x00_ss-$(CONFIG_MIPS_XXS1500) += au1000_xxs1500.o
|
|
|
|
sa1111_cs-y += sa1111_generic.o
|
|
sa1111_cs-$(CONFIG_ASSABET_NEPONSET) += sa1100_neponset.o
|
|
sa1111_cs-$(CONFIG_SA1100_BADGE4) += sa1100_badge4.o
|
|
sa1111_cs-$(CONFIG_SA1100_JORNADA720) += sa1100_jornada720.o
|
|
|
|
sa1100_cs-y += sa1100_generic.o
|
|
sa1100_cs-$(CONFIG_SA1100_ASSABET) += sa1100_assabet.o
|
|
sa1100_cs-$(CONFIG_SA1100_CERF) += sa1100_cerf.o
|
|
sa1100_cs-$(CONFIG_SA1100_COLLIE) += pxa2xx_sharpsl.o
|
|
sa1100_cs-$(CONFIG_SA1100_H3600) += sa1100_h3600.o
|
|
sa1100_cs-$(CONFIG_SA1100_SHANNON) += sa1100_shannon.o
|
|
sa1100_cs-$(CONFIG_SA1100_SIMPAD) += sa1100_simpad.o
|
|
|
|
pxa2xx_cs-$(CONFIG_ARCH_LUBBOCK) += pxa2xx_lubbock.o sa1111_generic.o
|
|
pxa2xx_cs-$(CONFIG_MACH_MAINSTONE) += pxa2xx_mainstone.o
|
|
pxa2xx_cs-$(CONFIG_PXA_SHARPSL) += pxa2xx_sharpsl.o
|
|
pxa2xx_cs-$(CONFIG_MACH_ARMCORE) += pxa2xx_cm_x270.o
|
|
pxa2xx_cs-$(CONFIG_ARCH_VIPER) += pxa2xx_viper.o
|
|
pxa2xx_cs-$(CONFIG_MACH_PALMTX) += pxa2xx_palmtx.o
|
|
|