linux/drivers/clk/sunxi-ng/ccu-sun50i-a100.c
Yangtao Li fb038ce4db
clk: sunxi-ng: add support for the Allwinner A100 CCU
Add support for a100 in the sunxi-ng CCU framework.

Signed-off-by: Yangtao Li <frank@allwinnertech.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1eb41bf6c966a0e54820200650d27a5d4f2ac160.1595572867.git.frank@allwinnertech.com
2020-08-25 10:52:18 +02:00

1277 lines
39 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2020 Yangtao Li <frank@allwinnertech.com>
*/
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include "ccu_common.h"
#include "ccu_reset.h"
#include "ccu_div.h"
#include "ccu_gate.h"
#include "ccu_mp.h"
#include "ccu_mult.h"
#include "ccu_nk.h"
#include "ccu_nkm.h"
#include "ccu_nkmp.h"
#include "ccu_nm.h"
#include "ccu-sun50i-a100.h"
#define SUN50I_A100_PLL_SDM_ENABLE BIT(24)
#define SUN50I_A100_PLL_OUTPUT_ENABLE BIT(27)
#define SUN50I_A100_PLL_LOCK BIT(28)
#define SUN50I_A100_PLL_LOCK_ENABLE BIT(29)
#define SUN50I_A100_PLL_ENABLE BIT(31)
#define SUN50I_A100_PLL_PERIPH1_PATTERN0 0xd1303333
/*
* The CPU PLL is actually NP clock, with P being /1, /2 or /4. However
* P should only be used for output frequencies lower than 288 MHz.
*
* For now we can just model it as a multiplier clock, and force P to /1.
*
* The M factor is present in the register's description, but not in the
* frequency formula, and it's documented as "M is only used for backdoor
* testing", so it's not modelled and then force to 0.
*/
#define SUN50I_A100_PLL_CPUX_REG 0x000
static struct ccu_mult pll_cpux_clk = {
.enable = SUN50I_A100_PLL_OUTPUT_ENABLE,
.lock = SUN50I_A100_PLL_LOCK,
.mult = _SUNXI_CCU_MULT_MIN(8, 8, 12),
.common = {
.reg = 0x000,
.hw.init = CLK_HW_INIT("pll-cpux", "dcxo24M",
&ccu_mult_ops,
CLK_SET_RATE_UNGATE),
},
};
/* Some PLLs are input * N / div1 / P. Model them as NKMP with no K */
#define SUN50I_A100_PLL_DDR0_REG 0x010
static struct ccu_nkmp pll_ddr0_clk = {
.enable = SUN50I_A100_PLL_OUTPUT_ENABLE,
.lock = SUN50I_A100_PLL_LOCK,
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
.p = _SUNXI_CCU_DIV(0, 1), /* output divider */
.common = {
.reg = 0x010,
.hw.init = CLK_HW_INIT("pll-ddr0", "dcxo24M",
&ccu_nkmp_ops,
CLK_SET_RATE_UNGATE |
CLK_IS_CRITICAL),
},
};
#define SUN50I_A100_PLL_PERIPH0_REG 0x020
static struct ccu_nkmp pll_periph0_clk = {
.enable = SUN50I_A100_PLL_OUTPUT_ENABLE,
.lock = SUN50I_A100_PLL_LOCK,
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
.p = _SUNXI_CCU_DIV(0, 1), /* output divider */
.fixed_post_div = 2,
.common = {
.reg = 0x020,
.features = CCU_FEATURE_FIXED_POSTDIV,
.hw.init = CLK_HW_INIT("pll-periph0", "dcxo24M",
&ccu_nkmp_ops,
CLK_SET_RATE_UNGATE),
},
};
#define SUN50I_A100_PLL_PERIPH1_REG 0x028
static struct ccu_nkmp pll_periph1_clk = {
.enable = SUN50I_A100_PLL_OUTPUT_ENABLE,
.lock = SUN50I_A100_PLL_LOCK,
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
.p = _SUNXI_CCU_DIV(0, 1), /* output divider */
.fixed_post_div = 2,
.common = {
.reg = 0x028,
.features = CCU_FEATURE_FIXED_POSTDIV,
.hw.init = CLK_HW_INIT("pll-periph1", "dcxo24M",
&ccu_nkmp_ops,
CLK_SET_RATE_UNGATE),
},
};
#define SUN50I_A100_PLL_PERIPH1_PATTERN0_REG 0x128
#define SUN50I_A100_PLL_GPU_REG 0x030
static struct ccu_nkmp pll_gpu_clk = {
.enable = SUN50I_A100_PLL_OUTPUT_ENABLE,
.lock = SUN50I_A100_PLL_LOCK,
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
.p = _SUNXI_CCU_DIV(0, 1), /* output divider */
.common = {
.reg = 0x030,
.hw.init = CLK_HW_INIT("pll-gpu", "dcxo24M",
&ccu_nkmp_ops,
CLK_SET_RATE_UNGATE),
},
};
/*
* For Video PLLs, the output divider is described as "used for testing"
* in the user manual. So it's not modelled and forced to 0.
*/
#define SUN50I_A100_PLL_VIDEO0_REG 0x040
static struct ccu_nm pll_video0_clk = {
.enable = SUN50I_A100_PLL_OUTPUT_ENABLE,
.lock = SUN50I_A100_PLL_LOCK,
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
.fixed_post_div = 4,
.common = {
.reg = 0x040,
.features = CCU_FEATURE_FIXED_POSTDIV,
.hw.init = CLK_HW_INIT("pll-video0", "dcxo24M",
&ccu_nm_ops,
CLK_SET_RATE_UNGATE),
},
};
#define SUN50I_A100_PLL_VIDEO1_REG 0x048
static struct ccu_nm pll_video1_clk = {
.enable = SUN50I_A100_PLL_OUTPUT_ENABLE,
.lock = SUN50I_A100_PLL_LOCK,
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
.fixed_post_div = 4,
.common = {
.reg = 0x048,
.features = CCU_FEATURE_FIXED_POSTDIV,
.hw.init = CLK_HW_INIT("pll-video1", "dcxo24M",
&ccu_nm_ops,
CLK_SET_RATE_UNGATE),
},
};
#define SUN50I_A100_PLL_VIDEO2_REG 0x050
static struct ccu_nm pll_video2_clk = {
.enable = SUN50I_A100_PLL_OUTPUT_ENABLE,
.lock = SUN50I_A100_PLL_LOCK,
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
.fixed_post_div = 4,
.common = {
.reg = 0x050,
.features = CCU_FEATURE_FIXED_POSTDIV,
.hw.init = CLK_HW_INIT("pll-video2", "dcxo24M",
&ccu_nm_ops,
CLK_SET_RATE_UNGATE),
},
};
#define SUN50I_A100_PLL_VE_REG 0x058
static struct ccu_nkmp pll_ve_clk = {
.enable = SUN50I_A100_PLL_OUTPUT_ENABLE,
.lock = SUN50I_A100_PLL_LOCK,
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
.p = _SUNXI_CCU_DIV(0, 1), /* output divider */
.common = {
.reg = 0x058,
.hw.init = CLK_HW_INIT("pll-ve", "dcxo24M",
&ccu_nkmp_ops,
CLK_SET_RATE_UNGATE),
},
};
/*
* The COM PLL has m0 dividers in addition to the usual N, M
* factors. Since we only need 1 frequencies from this PLL: 45.1584 MHz,
* ignore it for now.
*/
#define SUN50I_A100_PLL_COM_REG 0x060
static struct ccu_sdm_setting pll_com_sdm_table[] = {
{ .rate = 451584000, .pattern = 0xc0014396, .m = 2, .n = 37 },
};
static struct ccu_nm pll_com_clk = {
.enable = SUN50I_A100_PLL_OUTPUT_ENABLE,
.lock = SUN50I_A100_PLL_LOCK,
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
.m = _SUNXI_CCU_DIV(0, 1),
.sdm = _SUNXI_CCU_SDM(pll_com_sdm_table, BIT(24),
0x160, BIT(31)),
.common = {
.reg = 0x060,
.features = CCU_FEATURE_SIGMA_DELTA_MOD,
.hw.init = CLK_HW_INIT("pll-com", "dcxo24M",
&ccu_nm_ops,
CLK_SET_RATE_UNGATE),
},
};
#define SUN50I_A100_PLL_VIDEO3_REG 0x068
static struct ccu_nm pll_video3_clk = {
.enable = SUN50I_A100_PLL_OUTPUT_ENABLE,
.lock = SUN50I_A100_PLL_LOCK,
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
.fixed_post_div = 4,
.common = {
.reg = 0x068,
.features = CCU_FEATURE_FIXED_POSTDIV,
.hw.init = CLK_HW_INIT("pll-video3", "dcxo24M",
&ccu_nm_ops,
CLK_SET_RATE_UNGATE),
},
};
/*
* The Audio PLL has m0, m1 dividers in addition to the usual N, M
* factors. Since we only need 4 frequencies from this PLL: 22.5792 MHz,
* 24.576 MHz, 90.3168MHz and 98.304MHz ignore them for now.
* Enforce the default for them, which is m0 = 1, m1 = 0.
*/
#define SUN50I_A100_PLL_AUDIO_REG 0x078
static struct ccu_sdm_setting pll_audio_sdm_table[] = {
{ .rate = 45158400, .pattern = 0xc001bcd3, .m = 18, .n = 33 },
{ .rate = 49152000, .pattern = 0xc001eb85, .m = 20, .n = 40 },
{ .rate = 180633600, .pattern = 0xc001288d, .m = 3, .n = 22 },
{ .rate = 196608000, .pattern = 0xc001eb85, .m = 5, .n = 40 },
};
static struct ccu_nm pll_audio_clk = {
.enable = SUN50I_A100_PLL_OUTPUT_ENABLE,
.lock = SUN50I_A100_PLL_LOCK,
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
.m = _SUNXI_CCU_DIV(16, 6),
.fixed_post_div = 2,
.sdm = _SUNXI_CCU_SDM(pll_audio_sdm_table, BIT(24),
0x178, BIT(31)),
.common = {
.reg = 0x078,
.features = CCU_FEATURE_FIXED_POSTDIV |
CCU_FEATURE_SIGMA_DELTA_MOD,
.hw.init = CLK_HW_INIT("pll-audio", "dcxo24M",
&ccu_nm_ops,
CLK_SET_RATE_UNGATE),
},
};
static const char * const cpux_parents[] = { "dcxo24M", "osc32k",
"iosc", "pll-cpux",
"pll-periph0" };
static SUNXI_CCU_MUX(cpux_clk, "cpux", cpux_parents,
0x500, 24, 3, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x500, 0, 2, 0);
static SUNXI_CCU_M(cpux_apb_clk, "cpux-apb", "cpux", 0x500, 8, 2, 0);
static const char * const psi_ahb1_ahb2_parents[] = { "dcxo24M", "osc32k",
"iosc", "pll-periph0",
"pll-periph0-2x" };
static SUNXI_CCU_MP_WITH_MUX(psi_ahb1_ahb2_clk, "psi-ahb1-ahb2",
psi_ahb1_ahb2_parents, 0x510,
0, 2, /* M */
8, 2, /* P */
24, 3, /* mux */
0);
static const char * const ahb3_apb1_apb2_parents[] = { "dcxo24M", "osc32k",
"psi-ahb1-ahb2",
"pll-periph0",
"pll-periph0-2x" };
static SUNXI_CCU_MP_WITH_MUX(ahb3_clk, "ahb3", ahb3_apb1_apb2_parents, 0x51c,
0, 2, /* M */
8, 2, /* P */
24, 3, /* mux */
0);
static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", ahb3_apb1_apb2_parents, 0x520,
0, 2, /* M */
8, 2, /* P */
24, 3, /* mux */
0);
static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", ahb3_apb1_apb2_parents, 0x524,
0, 2, /* M */
8, 2, /* P */
24, 3, /* mux */
0);
static const char * const mbus_parents[] = { "dcxo24M", "pll-ddr0",
"pll-periph0",
"pll-periph0-2x" };
static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents, 0x540,
0, 3, /* M */
24, 2, /* mux */
BIT(31), /* gate */
CLK_IS_CRITICAL);
static const char * const de_parents[] = { "pll-com", "pll-periph0-2x" };
static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de0", de_parents, 0x600,
0, 4, /* M */
24, 1, /* mux */
BIT(31), /* gate */
CLK_SET_RATE_PARENT);
static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "psi-ahb1-ahb2",
0x60c, BIT(0), 0);
static const char * const g2d_parents[] = { "pll-com", "pll-periph0-2x",
"pll-video0-2x", "pll-video1-2x",
"pll-video2-2x"};
static SUNXI_CCU_M_WITH_MUX_GATE(g2d_clk, "g2d",
g2d_parents,
0x630,
0, 4, /* M */
24, 3, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_GATE(bus_g2d_clk, "bus-g2d", "psi-ahb1-ahb2",
0x63c, BIT(0), 0);
static const char * const gpu_parents[] = { "pll-gpu" };
static SUNXI_CCU_M_WITH_MUX_GATE(gpu_clk, "gpu", gpu_parents, 0x670,
0, 2, /* M */
24, 1, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "psi-ahb1-ahb2",
0x67c, BIT(0), 0);
static const char * const ce_parents[] = { "dcxo24M", "pll-periph0-2x" };
static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", ce_parents, 0x680,
0, 4, /* M */
8, 2, /* P */
24, 1, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_GATE(bus_ce_clk, "bus-ce", "psi-ahb1-ahb2",
0x68c, BIT(0), 0);
static const char * const ve_parents[] = { "pll-ve" };
static SUNXI_CCU_M_WITH_MUX_GATE(ve_clk, "ve", ve_parents, 0x690,
0, 3, /* M */
24, 1, /* mux */
BIT(31), /* gate */
CLK_SET_RATE_PARENT);
static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "psi-ahb1-ahb2",
0x69c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "psi-ahb1-ahb2",
0x70c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_msgbox_clk, "bus-msgbox", "psi-ahb1-ahb2",
0x71c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_spinlock_clk, "bus-spinlock", "psi-ahb1-ahb2",
0x72c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_hstimer_clk, "bus-hstimer", "psi-ahb1-ahb2",
0x73c, BIT(0), 0);
static SUNXI_CCU_GATE(avs_clk, "avs", "dcxo24M", 0x740, BIT(31), 0);
static SUNXI_CCU_GATE(bus_dbg_clk, "bus-dbg", "psi-ahb1-ahb2",
0x78c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_psi_clk, "bus-psi", "psi-ahb1-ahb2",
0x79c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_pwm_clk, "bus-pwm", "apb1", 0x7ac, BIT(0), 0);
static SUNXI_CCU_GATE(bus_iommu_clk, "bus-iommu", "apb1", 0x7bc, BIT(0), 0);
static SUNXI_CCU_GATE(mbus_dma_clk, "mbus-dma", "mbus",
0x804, BIT(0), 0);
static SUNXI_CCU_GATE(mbus_ve_clk, "mbus-ve", "mbus",
0x804, BIT(1), 0);
static SUNXI_CCU_GATE(mbus_ce_clk, "mbus-ce", "mbus",
0x804, BIT(2), 0);
static SUNXI_CCU_GATE(mbus_nand_clk, "mbus-nand", "mbus",
0x804, BIT(5), 0);
static SUNXI_CCU_GATE(mbus_csi_clk, "mbus-csi", "mbus",
0x804, BIT(8), 0);
static SUNXI_CCU_GATE(mbus_isp_clk, "mbus-isp", "mbus",
0x804, BIT(9), 0);
static SUNXI_CCU_GATE(mbus_g2d_clk, "mbus-g2d", "mbus",
0x804, BIT(10), 0);
static SUNXI_CCU_GATE(bus_dram_clk, "bus-dram", "psi-ahb1-ahb2",
0x80c, BIT(0), CLK_IS_CRITICAL);
static const char * const nand_spi_parents[] = { "dcxo24M",
"pll-periph0",
"pll-periph1",
"pll-periph0-2x",
"pll-periph1-2x" };
static SUNXI_CCU_MP_WITH_MUX_GATE(nand0_clk, "nand0", nand_spi_parents, 0x810,
0, 4, /* M */
8, 2, /* P */
24, 3, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE(nand1_clk, "nand1", nand_spi_parents, 0x814,
0, 4, /* M */
8, 2, /* P */
24, 3, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_GATE(bus_nand_clk, "bus-nand", "ahb3", 0x82c, BIT(0), 0);
static const char * const mmc_parents[] = { "dcxo24M", "pll-periph0-2x",
"pll-periph1-2x" };
static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc0_clk, "mmc0", mmc_parents, 0x830,
0, 4, /* M */
8, 2, /* P */
24, 2, /* mux */
BIT(31), /* gate */
2, /* post-div */
CLK_SET_RATE_NO_REPARENT);
static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc1_clk, "mmc1", mmc_parents, 0x834,
0, 4, /* M */
8, 2, /* P */
24, 2, /* mux */
BIT(31), /* gate */
2, /* post-div */
CLK_SET_RATE_NO_REPARENT);
static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc2_clk, "mmc2", mmc_parents, 0x838,
0, 4, /* M */
8, 2, /* P */
24, 2, /* mux */
BIT(31), /* gate */
2, /* post-div */
CLK_SET_RATE_NO_REPARENT);
static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb3", 0x84c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb3", 0x84c, BIT(1), 0);
static SUNXI_CCU_GATE(bus_mmc2_clk, "bus-mmc2", "ahb3", 0x84c, BIT(2), 0);
static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb2", 0x90c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb2", 0x90c, BIT(1), 0);
static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2", 0x90c, BIT(2), 0);
static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb2", 0x90c, BIT(3), 0);
static SUNXI_CCU_GATE(bus_uart4_clk, "bus-uart4", "apb2", 0x90c, BIT(4), 0);
static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2", 0x91c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb2", 0x91c, BIT(1), 0);
static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb2", 0x91c, BIT(2), 0);
static SUNXI_CCU_GATE(bus_i2c3_clk, "bus-i2c3", "apb2", 0x91c, BIT(3), 0);
static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", nand_spi_parents, 0x940,
0, 4, /* M */
8, 2, /* P */
24, 3, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", nand_spi_parents, 0x944,
0, 4, /* M */
8, 2, /* P */
24, 3, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE(spi2_clk, "spi2", nand_spi_parents, 0x948,
0, 4, /* M */
8, 2, /* P */
24, 3, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb3", 0x96c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_spi1_clk, "bus-spi1", "ahb3", 0x96c, BIT(1), 0);
static SUNXI_CCU_GATE(bus_spi2_clk, "bus-spi2", "ahb3", 0x96c, BIT(2), 0);
static SUNXI_CCU_GATE(emac_25m_clk, "emac-25m", "ahb3", 0x970,
BIT(31) | BIT(30), 0);
static SUNXI_CCU_GATE(bus_emac_clk, "bus-emac", "ahb3", 0x97c, BIT(0), 0);
static const char * const ir_parents[] = { "osc32k", "iosc",
"pll-periph0", "pll-periph1" };
static SUNXI_CCU_MP_WITH_MUX_GATE(ir_rx_clk, "ir-rx", ir_parents, 0x990,
0, 4, /* M */
8, 2, /* P */
24, 3, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_GATE(bus_ir_rx_clk, "bus-ir-rx", "ahb3", 0x99c, BIT(0), 0);
static SUNXI_CCU_MP_WITH_MUX_GATE(ir_tx_clk, "ir-tx", ir_parents, 0x9c0,
0, 4, /* M */
8, 2, /* P */
24, 3, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_GATE(bus_ir_tx_clk, "bus-ir-tx", "apb1", 0x9cc, BIT(0), 0);
static SUNXI_CCU_GATE(bus_gpadc_clk, "bus-gpadc", "apb1", 0x9ec, BIT(0), 0);
static SUNXI_CCU_GATE(bus_ths_clk, "bus-ths", "apb1", 0x9fc, BIT(0), 0);
static const char * const audio_parents[] = { "pll-audio", "pll-com-audio" };
static struct ccu_div i2s0_clk = {
.enable = BIT(31),
.div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
.mux = _SUNXI_CCU_MUX(24, 2),
.common = {
.reg = 0xa10,
.hw.init = CLK_HW_INIT_PARENTS("i2s0",
audio_parents,
&ccu_div_ops,
CLK_SET_RATE_PARENT),
},
};
static struct ccu_div i2s1_clk = {
.enable = BIT(31),
.div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
.mux = _SUNXI_CCU_MUX(24, 2),
.common = {
.reg = 0xa14,
.hw.init = CLK_HW_INIT_PARENTS("i2s1",
audio_parents,
&ccu_div_ops,
CLK_SET_RATE_PARENT),
},
};
static struct ccu_div i2s2_clk = {
.enable = BIT(31),
.div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
.mux = _SUNXI_CCU_MUX(24, 2),
.common = {
.reg = 0xa18,
.hw.init = CLK_HW_INIT_PARENTS("i2s2",
audio_parents,
&ccu_div_ops,
CLK_SET_RATE_PARENT),
},
};
static struct ccu_div i2s3_clk = {
.enable = BIT(31),
.div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
.mux = _SUNXI_CCU_MUX(24, 2),
.common = {
.reg = 0xa1c,
.hw.init = CLK_HW_INIT_PARENTS("i2s3",
audio_parents,
&ccu_div_ops,
CLK_SET_RATE_PARENT),
},
};
static SUNXI_CCU_GATE(bus_i2s0_clk, "bus-i2s0", "apb1", 0xa20, BIT(0), 0);
static SUNXI_CCU_GATE(bus_i2s1_clk, "bus-i2s1", "apb1", 0xa20, BIT(1), 0);
static SUNXI_CCU_GATE(bus_i2s2_clk, "bus-i2s2", "apb1", 0xa20, BIT(2), 0);
static SUNXI_CCU_GATE(bus_i2s3_clk, "bus-i2s3", "apb1", 0xa20, BIT(3), 0);
static struct ccu_div spdif_clk = {
.enable = BIT(31),
.div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
.mux = _SUNXI_CCU_MUX(24, 2),
.common = {
.reg = 0xa24,
.hw.init = CLK_HW_INIT_PARENTS("spdif",
audio_parents,
&ccu_div_ops,
0),
},
};
static SUNXI_CCU_GATE(bus_spdif_clk, "bus-spdif", "apb1", 0xa2c, BIT(0), 0);
static struct ccu_div dmic_clk = {
.enable = BIT(31),
.div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
.mux = _SUNXI_CCU_MUX(24, 2),
.common = {
.reg = 0xa40,
.hw.init = CLK_HW_INIT_PARENTS("dmic",
audio_parents,
&ccu_div_ops,
0),
},
};
static SUNXI_CCU_GATE(bus_dmic_clk, "bus-dmic", "apb1", 0xa4c, BIT(0), 0);
static SUNXI_CCU_M_WITH_MUX_GATE(audio_codec_dac_clk, "audio-codec-dac",
audio_parents, 0xa50,
0, 4, /* M */
24, 2, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_M_WITH_MUX_GATE(audio_codec_adc_clk, "audio-codec-adc",
audio_parents, 0xa54,
0, 4, /* M */
24, 2, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_M_WITH_MUX_GATE(audio_codec_4x_clk, "audio-codec-4x",
audio_parents, 0xa58,
0, 4, /* M */
24, 2, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_GATE(bus_audio_codec_clk, "bus-audio-codec", "apb1", 0xa5c,
BIT(0), 0);
/*
* There are OHCI 12M clock source selection bits for 2 USB 2.0 ports.
* We will force them to 0 (12M divided from 48M).
*/
#define SUN50I_A100_USB0_CLK_REG 0xa70
#define SUN50I_A100_USB1_CLK_REG 0xa74
static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc12M", 0xa70, BIT(31), 0);
static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "dcxo24M", 0xa70, BIT(29), 0);
static SUNXI_CCU_GATE(usb_ohci1_clk, "usb-ohci1", "osc12M", 0xa74, BIT(31), 0);
static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "dcxo24M", 0xa74, BIT(29), 0);
static SUNXI_CCU_GATE(bus_ohci0_clk, "bus-ohci0", "ahb3", 0xa8c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_ohci1_clk, "bus-ohci1", "ahb3", 0xa8c, BIT(1), 0);
static SUNXI_CCU_GATE(bus_ehci0_clk, "bus-ehci0", "ahb3", 0xa8c, BIT(4), 0);
static SUNXI_CCU_GATE(bus_ehci1_clk, "bus-ehci1", "ahb3", 0xa8c, BIT(5), 0);
static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb3", 0xa8c, BIT(8), 0);
static SUNXI_CCU_GATE(bus_lradc_clk, "bus-lradc", "ahb3", 0xa9c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_dpss_top0_clk, "bus-dpss-top0", "ahb3",
0xabc, BIT(0), 0);
static SUNXI_CCU_GATE(bus_dpss_top1_clk, "bus-dpss-top1", "ahb3",
0xacc, BIT(0), 0);
static const char * const mipi_dsi_parents[] = { "dcxo24M", "pll-periph0-2x",
"pll-periph0" };
static SUNXI_CCU_M_WITH_MUX_GATE(mipi_dsi_clk, "mipi-dsi",
mipi_dsi_parents,
0xb24,
0, 4, /* M */
24, 2, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_GATE(bus_mipi_dsi_clk, "bus-mipi-dsi", "ahb3",
0xb4c, BIT(0), 0);
static const char * const tcon_lcd_parents[] = { "pll-video0-4x",
"pll-video1-4x",
"pll-video2-4x",
"pll-video3-4x",
"pll-periph0-2x" };
static SUNXI_CCU_MP_WITH_MUX_GATE(tcon_lcd_clk, "tcon-lcd0",
tcon_lcd_parents, 0xb60,
0, 4, /* M */
8, 2, /* P */
24, 3, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_GATE(bus_tcon_lcd_clk, "bus-tcon-lcd0", "ahb3",
0xb7c, BIT(0), 0);
static const char * const ledc_parents[] = { "dcxo24M",
"pll-periph0" };
static SUNXI_CCU_MP_WITH_MUX_GATE(ledc_clk, "ledc",
ledc_parents, 0xbf0,
0, 4, /* M */
8, 2, /* P */
24, 3, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_GATE(bus_ledc_clk, "bus-ledc", "ahb3", 0xbfc, BIT(0), 0);
static const char * const csi_top_parents[] = { "pll-periph0-2x",
"pll-video0-2x",
"pll-video1-2x",
"pll-video2-2x",
"pll-video3-2x" };
static SUNXI_CCU_M_WITH_MUX_GATE(csi_top_clk, "csi-top",
csi_top_parents, 0xc04,
0, 4, /* M */
24, 3, /* mux */
BIT(31), /* gate */
0);
static const char * const csi0_mclk_parents[] = { "dcxo24M", "pll-video2",
"pll-video3", "pll-video0",
"pll-video1" };
static SUNXI_CCU_M_WITH_MUX_GATE(csi0_mclk_clk, "csi0-mclk",
csi0_mclk_parents, 0xc08,
0, 5, /* M */
24, 3, /* mux */
BIT(31), /* gate */
0);
static const char * const csi1_mclk_parents[] = { "dcxo24M", "pll-video3",
"pll-video0", "pll-video1",
"pll-video2" };
static SUNXI_CCU_M_WITH_MUX_GATE(csi1_mclk_clk, "csi1-mclk",
csi1_mclk_parents, 0xc0c,
0, 5, /* M */
24, 3, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_GATE(bus_csi_clk, "bus-csi", "ahb3", 0xc1c, BIT(0), 0);
static const char * const csi_isp_parents[] = { "pll-periph0-2x",
"pll-video0-2x",
"pll-video1-2x",
"pll-video2-2x",
"pll-video3-2x" };
static SUNXI_CCU_M_WITH_MUX_GATE(csi_isp_clk, "csi-isp",
csi_isp_parents, 0xc20,
0, 5, /* M */
24, 3, /* mux */
BIT(31), /* gate */
0);
/* Fixed factor clocks */
static CLK_FIXED_FACTOR_FW_NAME(osc12M_clk, "osc12M", "hosc", 2, 1, 0);
static CLK_FIXED_FACTOR_HW(pll_com_audio_clk, "pll-com-audio",
&pll_com_clk.common.hw,
5, 1, CLK_SET_RATE_PARENT);
static CLK_FIXED_FACTOR_HW(pll_periph0_2x_clk, "pll-periph0-2x",
&pll_periph0_clk.common.hw,
1, 2, 0);
static CLK_FIXED_FACTOR_HW(pll_periph1_2x_clk, "pll-periph1-2x",
&pll_periph1_clk.common.hw,
1, 2, 0);
static const struct clk_hw *pll_video0_parents[] = {
&pll_video0_clk.common.hw
};
static CLK_FIXED_FACTOR_HWS(pll_video0_4x_clk, "pll-video0-4x",
pll_video0_parents,
1, 4, CLK_SET_RATE_PARENT);
static CLK_FIXED_FACTOR_HWS(pll_video0_2x_clk, "pll-video0-2x",
pll_video0_parents,
1, 2, CLK_SET_RATE_PARENT);
static const struct clk_hw *pll_video1_parents[] = {
&pll_video1_clk.common.hw
};
static CLK_FIXED_FACTOR_HWS(pll_video1_4x_clk, "pll-video1-4x",
pll_video1_parents,
1, 4, CLK_SET_RATE_PARENT);
static CLK_FIXED_FACTOR_HWS(pll_video1_2x_clk, "pll-video1-2x",
pll_video1_parents,
1, 2, CLK_SET_RATE_PARENT);
static const struct clk_hw *pll_video2_parents[] = {
&pll_video2_clk.common.hw
};
static CLK_FIXED_FACTOR_HWS(pll_video2_4x_clk, "pll-video2-4x",
pll_video2_parents,
1, 4, CLK_SET_RATE_PARENT);
static CLK_FIXED_FACTOR_HWS(pll_video2_2x_clk, "pll-video2-2x",
pll_video2_parents,
1, 2, CLK_SET_RATE_PARENT);
static const struct clk_hw *pll_video3_parents[] = {
&pll_video3_clk.common.hw
};
static CLK_FIXED_FACTOR_HWS(pll_video3_4x_clk, "pll-video3-4x",
pll_video3_parents,
1, 4, CLK_SET_RATE_PARENT);
static CLK_FIXED_FACTOR_HWS(pll_video3_2x_clk, "pll-video3-2x",
pll_video3_parents,
1, 2, CLK_SET_RATE_PARENT);
static struct ccu_common *sun50i_a100_ccu_clks[] = {
&pll_cpux_clk.common,
&pll_ddr0_clk.common,
&pll_periph0_clk.common,
&pll_periph1_clk.common,
&pll_gpu_clk.common,
&pll_video0_clk.common,
&pll_video1_clk.common,
&pll_video2_clk.common,
&pll_video3_clk.common,
&pll_ve_clk.common,
&pll_com_clk.common,
&pll_audio_clk.common,
&cpux_clk.common,
&axi_clk.common,
&cpux_apb_clk.common,
&psi_ahb1_ahb2_clk.common,
&ahb3_clk.common,
&apb1_clk.common,
&apb2_clk.common,
&mbus_clk.common,
&de_clk.common,
&bus_de_clk.common,
&g2d_clk.common,
&bus_g2d_clk.common,
&gpu_clk.common,
&bus_gpu_clk.common,
&ce_clk.common,
&bus_ce_clk.common,
&ve_clk.common,
&bus_ve_clk.common,
&bus_dma_clk.common,
&bus_msgbox_clk.common,
&bus_spinlock_clk.common,
&bus_hstimer_clk.common,
&avs_clk.common,
&bus_dbg_clk.common,
&bus_psi_clk.common,
&bus_pwm_clk.common,
&bus_iommu_clk.common,
&mbus_dma_clk.common,
&mbus_ve_clk.common,
&mbus_ce_clk.common,
&mbus_nand_clk.common,
&mbus_csi_clk.common,
&mbus_isp_clk.common,
&mbus_g2d_clk.common,
&bus_dram_clk.common,
&nand0_clk.common,
&nand1_clk.common,
&bus_nand_clk.common,
&mmc0_clk.common,
&mmc1_clk.common,
&mmc2_clk.common,
&bus_mmc0_clk.common,
&bus_mmc1_clk.common,
&bus_mmc2_clk.common,
&bus_uart0_clk.common,
&bus_uart1_clk.common,
&bus_uart2_clk.common,
&bus_uart3_clk.common,
&bus_uart4_clk.common,
&bus_i2c0_clk.common,
&bus_i2c1_clk.common,
&bus_i2c2_clk.common,
&bus_i2c3_clk.common,
&spi0_clk.common,
&spi1_clk.common,
&spi2_clk.common,
&bus_spi0_clk.common,
&bus_spi1_clk.common,
&bus_spi2_clk.common,
&emac_25m_clk.common,
&bus_emac_clk.common,
&ir_rx_clk.common,
&bus_ir_rx_clk.common,
&ir_tx_clk.common,
&bus_ir_tx_clk.common,
&bus_gpadc_clk.common,
&bus_ths_clk.common,
&i2s0_clk.common,
&i2s1_clk.common,
&i2s2_clk.common,
&i2s3_clk.common,
&bus_i2s0_clk.common,
&bus_i2s1_clk.common,
&bus_i2s2_clk.common,
&bus_i2s3_clk.common,
&spdif_clk.common,
&bus_spdif_clk.common,
&dmic_clk.common,
&bus_dmic_clk.common,
&audio_codec_dac_clk.common,
&audio_codec_adc_clk.common,
&audio_codec_4x_clk.common,
&bus_audio_codec_clk.common,
&usb_ohci0_clk.common,
&usb_phy0_clk.common,
&usb_ohci1_clk.common,
&usb_phy1_clk.common,
&bus_ohci0_clk.common,
&bus_ohci1_clk.common,
&bus_ehci0_clk.common,
&bus_ehci1_clk.common,
&bus_otg_clk.common,
&bus_lradc_clk.common,
&bus_dpss_top0_clk.common,
&bus_dpss_top1_clk.common,
&mipi_dsi_clk.common,
&bus_mipi_dsi_clk.common,
&tcon_lcd_clk.common,
&bus_tcon_lcd_clk.common,
&ledc_clk.common,
&bus_ledc_clk.common,
&csi_top_clk.common,
&csi0_mclk_clk.common,
&csi1_mclk_clk.common,
&bus_csi_clk.common,
&csi_isp_clk.common,
};
static struct clk_hw_onecell_data sun50i_a100_hw_clks = {
.hws = {
[CLK_OSC12M] = &osc12M_clk.hw,
[CLK_PLL_CPUX] = &pll_cpux_clk.common.hw,
[CLK_PLL_DDR0] = &pll_ddr0_clk.common.hw,
[CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw,
[CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw,
[CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw,
[CLK_PLL_PERIPH1_2X] = &pll_periph1_2x_clk.hw,
[CLK_PLL_GPU] = &pll_gpu_clk.common.hw,
[CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw,
[CLK_PLL_VIDEO0_2X] = &pll_video0_2x_clk.hw,
[CLK_PLL_VIDEO0_4X] = &pll_video0_4x_clk.hw,
[CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw,
[CLK_PLL_VIDEO1_2X] = &pll_video1_2x_clk.hw,
[CLK_PLL_VIDEO1_4X] = &pll_video1_4x_clk.hw,
[CLK_PLL_VIDEO2] = &pll_video2_clk.common.hw,
[CLK_PLL_VIDEO2_2X] = &pll_video2_2x_clk.hw,
[CLK_PLL_VIDEO2_4X] = &pll_video2_4x_clk.hw,
[CLK_PLL_VIDEO3] = &pll_video3_clk.common.hw,
[CLK_PLL_VIDEO3_2X] = &pll_video3_2x_clk.hw,
[CLK_PLL_VIDEO3_4X] = &pll_video3_4x_clk.hw,
[CLK_PLL_VE] = &pll_ve_clk.common.hw,
[CLK_PLL_COM] = &pll_com_clk.common.hw,
[CLK_PLL_COM_AUDIO] = &pll_com_audio_clk.hw,
[CLK_PLL_AUDIO] = &pll_audio_clk.common.hw,
[CLK_CPUX] = &cpux_clk.common.hw,
[CLK_AXI] = &axi_clk.common.hw,
[CLK_CPUX_APB] = &cpux_apb_clk.common.hw,
[CLK_PSI_AHB1_AHB2] = &psi_ahb1_ahb2_clk.common.hw,
[CLK_AHB3] = &ahb3_clk.common.hw,
[CLK_APB1] = &apb1_clk.common.hw,
[CLK_APB2] = &apb2_clk.common.hw,
[CLK_MBUS] = &mbus_clk.common.hw,
[CLK_DE] = &de_clk.common.hw,
[CLK_BUS_DE] = &bus_de_clk.common.hw,
[CLK_G2D] = &g2d_clk.common.hw,
[CLK_BUS_G2D] = &bus_g2d_clk.common.hw,
[CLK_GPU] = &gpu_clk.common.hw,
[CLK_BUS_GPU] = &bus_gpu_clk.common.hw,
[CLK_CE] = &ce_clk.common.hw,
[CLK_BUS_CE] = &bus_ce_clk.common.hw,
[CLK_VE] = &ve_clk.common.hw,
[CLK_BUS_VE] = &bus_ve_clk.common.hw,
[CLK_BUS_DMA] = &bus_dma_clk.common.hw,
[CLK_BUS_MSGBOX] = &bus_msgbox_clk.common.hw,
[CLK_BUS_SPINLOCK] = &bus_spinlock_clk.common.hw,
[CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw,
[CLK_AVS] = &avs_clk.common.hw,
[CLK_BUS_DBG] = &bus_dbg_clk.common.hw,
[CLK_BUS_PSI] = &bus_psi_clk.common.hw,
[CLK_BUS_PWM] = &bus_pwm_clk.common.hw,
[CLK_BUS_IOMMU] = &bus_iommu_clk.common.hw,
[CLK_MBUS_DMA] = &mbus_dma_clk.common.hw,
[CLK_MBUS_VE] = &mbus_ve_clk.common.hw,
[CLK_MBUS_CE] = &mbus_ce_clk.common.hw,
[CLK_MBUS_NAND] = &mbus_nand_clk.common.hw,
[CLK_MBUS_CSI] = &mbus_csi_clk.common.hw,
[CLK_MBUS_ISP] = &mbus_isp_clk.common.hw,
[CLK_MBUS_G2D] = &mbus_g2d_clk.common.hw,
[CLK_BUS_DRAM] = &bus_dram_clk.common.hw,
[CLK_NAND0] = &nand0_clk.common.hw,
[CLK_NAND1] = &nand1_clk.common.hw,
[CLK_BUS_NAND] = &bus_nand_clk.common.hw,
[CLK_MMC0] = &mmc0_clk.common.hw,
[CLK_MMC1] = &mmc1_clk.common.hw,
[CLK_MMC2] = &mmc2_clk.common.hw,
[CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw,
[CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw,
[CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw,
[CLK_BUS_UART0] = &bus_uart0_clk.common.hw,
[CLK_BUS_UART1] = &bus_uart1_clk.common.hw,
[CLK_BUS_UART2] = &bus_uart2_clk.common.hw,
[CLK_BUS_UART3] = &bus_uart3_clk.common.hw,
[CLK_BUS_UART4] = &bus_uart4_clk.common.hw,
[CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw,
[CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw,
[CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw,
[CLK_BUS_I2C3] = &bus_i2c3_clk.common.hw,
[CLK_SPI0] = &spi0_clk.common.hw,
[CLK_SPI1] = &spi1_clk.common.hw,
[CLK_SPI2] = &spi2_clk.common.hw,
[CLK_BUS_SPI0] = &bus_spi0_clk.common.hw,
[CLK_BUS_SPI1] = &bus_spi1_clk.common.hw,
[CLK_BUS_SPI2] = &bus_spi2_clk.common.hw,
[CLK_EMAC_25M] = &emac_25m_clk.common.hw,
[CLK_BUS_EMAC] = &bus_emac_clk.common.hw,
[CLK_IR_RX] = &ir_rx_clk.common.hw,
[CLK_BUS_IR_RX] = &bus_ir_rx_clk.common.hw,
[CLK_IR_TX] = &ir_tx_clk.common.hw,
[CLK_BUS_IR_TX] = &bus_ir_tx_clk.common.hw,
[CLK_BUS_GPADC] = &bus_gpadc_clk.common.hw,
[CLK_BUS_THS] = &bus_ths_clk.common.hw,
[CLK_I2S0] = &i2s0_clk.common.hw,
[CLK_I2S1] = &i2s1_clk.common.hw,
[CLK_I2S2] = &i2s2_clk.common.hw,
[CLK_I2S3] = &i2s3_clk.common.hw,
[CLK_BUS_I2S0] = &bus_i2s0_clk.common.hw,
[CLK_BUS_I2S1] = &bus_i2s1_clk.common.hw,
[CLK_BUS_I2S2] = &bus_i2s2_clk.common.hw,
[CLK_BUS_I2S3] = &bus_i2s3_clk.common.hw,
[CLK_SPDIF] = &spdif_clk.common.hw,
[CLK_BUS_SPDIF] = &bus_spdif_clk.common.hw,
[CLK_DMIC] = &dmic_clk.common.hw,
[CLK_BUS_DMIC] = &bus_dmic_clk.common.hw,
[CLK_AUDIO_DAC] = &audio_codec_dac_clk.common.hw,
[CLK_AUDIO_ADC] = &audio_codec_adc_clk.common.hw,
[CLK_AUDIO_4X] = &audio_codec_4x_clk.common.hw,
[CLK_BUS_AUDIO_CODEC] = &bus_audio_codec_clk.common.hw,
[CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
[CLK_USB_PHY0] = &usb_phy0_clk.common.hw,
[CLK_USB_OHCI1] = &usb_ohci1_clk.common.hw,
[CLK_USB_PHY1] = &usb_phy1_clk.common.hw,
[CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw,
[CLK_BUS_OHCI1] = &bus_ohci1_clk.common.hw,
[CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw,
[CLK_BUS_EHCI1] = &bus_ehci1_clk.common.hw,
[CLK_BUS_OTG] = &bus_otg_clk.common.hw,
[CLK_BUS_LRADC] = &bus_lradc_clk.common.hw,
[CLK_BUS_DPSS_TOP0] = &bus_dpss_top0_clk.common.hw,
[CLK_BUS_DPSS_TOP1] = &bus_dpss_top1_clk.common.hw,
[CLK_MIPI_DSI] = &mipi_dsi_clk.common.hw,
[CLK_BUS_MIPI_DSI] = &bus_mipi_dsi_clk.common.hw,
[CLK_TCON_LCD] = &tcon_lcd_clk.common.hw,
[CLK_BUS_TCON_LCD] = &bus_tcon_lcd_clk.common.hw,
[CLK_LEDC] = &ledc_clk.common.hw,
[CLK_BUS_LEDC] = &bus_ledc_clk.common.hw,
[CLK_CSI_TOP] = &csi_top_clk.common.hw,
[CLK_CSI0_MCLK] = &csi0_mclk_clk.common.hw,
[CLK_CSI1_MCLK] = &csi1_mclk_clk.common.hw,
[CLK_BUS_CSI] = &bus_csi_clk.common.hw,
[CLK_CSI_ISP] = &csi_isp_clk.common.hw,
},
.num = CLK_NUMBER,
};
static struct ccu_reset_map sun50i_a100_ccu_resets[] = {
[RST_MBUS] = { 0x540, BIT(30) },
[RST_BUS_DE] = { 0x60c, BIT(16) },
[RST_BUS_G2D] = { 0x63c, BIT(16) },
[RST_BUS_GPU] = { 0x67c, BIT(16) },
[RST_BUS_CE] = { 0x68c, BIT(16) },
[RST_BUS_VE] = { 0x69c, BIT(16) },
[RST_BUS_DMA] = { 0x70c, BIT(16) },
[RST_BUS_MSGBOX] = { 0x71c, BIT(16) },
[RST_BUS_SPINLOCK] = { 0x72c, BIT(16) },
[RST_BUS_HSTIMER] = { 0x73c, BIT(16) },
[RST_BUS_DBG] = { 0x78c, BIT(16) },
[RST_BUS_PSI] = { 0x79c, BIT(16) },
[RST_BUS_PWM] = { 0x7ac, BIT(16) },
[RST_BUS_DRAM] = { 0x80c, BIT(16) },
[RST_BUS_NAND] = { 0x82c, BIT(16) },
[RST_BUS_MMC0] = { 0x84c, BIT(16) },
[RST_BUS_MMC1] = { 0x84c, BIT(17) },
[RST_BUS_MMC2] = { 0x84c, BIT(18) },
[RST_BUS_UART0] = { 0x90c, BIT(16) },
[RST_BUS_UART1] = { 0x90c, BIT(17) },
[RST_BUS_UART2] = { 0x90c, BIT(18) },
[RST_BUS_UART3] = { 0x90c, BIT(19) },
[RST_BUS_UART4] = { 0x90c, BIT(20) },
[RST_BUS_I2C0] = { 0x91c, BIT(16) },
[RST_BUS_I2C1] = { 0x91c, BIT(17) },
[RST_BUS_I2C2] = { 0x91c, BIT(18) },
[RST_BUS_I2C3] = { 0x91c, BIT(19) },
[RST_BUS_SPI0] = { 0x96c, BIT(16) },
[RST_BUS_SPI1] = { 0x96c, BIT(17) },
[RST_BUS_SPI2] = { 0x96c, BIT(18) },
[RST_BUS_EMAC] = { 0x97c, BIT(16) },
[RST_BUS_IR_RX] = { 0x99c, BIT(16) },
[RST_BUS_IR_TX] = { 0x9cc, BIT(16) },
[RST_BUS_GPADC] = { 0x9ec, BIT(16) },
[RST_BUS_THS] = { 0x9fc, BIT(16) },
[RST_BUS_I2S0] = { 0xa20, BIT(16) },
[RST_BUS_I2S1] = { 0xa20, BIT(17) },
[RST_BUS_I2S2] = { 0xa20, BIT(18) },
[RST_BUS_I2S3] = { 0xa20, BIT(19) },
[RST_BUS_SPDIF] = { 0xa2c, BIT(16) },
[RST_BUS_DMIC] = { 0xa4c, BIT(16) },
[RST_BUS_AUDIO_CODEC] = { 0xa5c, BIT(16) },
[RST_USB_PHY0] = { 0xa70, BIT(30) },
[RST_USB_PHY1] = { 0xa74, BIT(30) },
[RST_BUS_OHCI0] = { 0xa8c, BIT(16) },
[RST_BUS_OHCI1] = { 0xa8c, BIT(17) },
[RST_BUS_EHCI0] = { 0xa8c, BIT(20) },
[RST_BUS_EHCI1] = { 0xa8c, BIT(21) },
[RST_BUS_OTG] = { 0xa8c, BIT(24) },
[RST_BUS_LRADC] = { 0xa9c, BIT(16) },
[RST_BUS_DPSS_TOP0] = { 0xabc, BIT(16) },
[RST_BUS_DPSS_TOP1] = { 0xacc, BIT(16) },
[RST_BUS_MIPI_DSI] = { 0xb4c, BIT(16) },
[RST_BUS_TCON_LCD] = { 0xb7c, BIT(16) },
[RST_BUS_LVDS] = { 0xbac, BIT(16) },
[RST_BUS_LEDC] = { 0xbfc, BIT(16) },
[RST_BUS_CSI] = { 0xc1c, BIT(16) },
[RST_BUS_CSI_ISP] = { 0xc2c, BIT(16) },
};
static const struct sunxi_ccu_desc sun50i_a100_ccu_desc = {
.ccu_clks = sun50i_a100_ccu_clks,
.num_ccu_clks = ARRAY_SIZE(sun50i_a100_ccu_clks),
.hw_clks = &sun50i_a100_hw_clks,
.resets = sun50i_a100_ccu_resets,
.num_resets = ARRAY_SIZE(sun50i_a100_ccu_resets),
};
static const u32 sun50i_a100_pll_regs[] = {
SUN50I_A100_PLL_CPUX_REG,
SUN50I_A100_PLL_DDR0_REG,
SUN50I_A100_PLL_PERIPH0_REG,
SUN50I_A100_PLL_PERIPH1_REG,
SUN50I_A100_PLL_GPU_REG,
SUN50I_A100_PLL_VIDEO0_REG,
SUN50I_A100_PLL_VIDEO1_REG,
SUN50I_A100_PLL_VIDEO2_REG,
SUN50I_A100_PLL_VIDEO3_REG,
SUN50I_A100_PLL_VE_REG,
SUN50I_A100_PLL_COM_REG,
SUN50I_A100_PLL_AUDIO_REG,
};
static const u32 sun50i_a100_pll_video_regs[] = {
SUN50I_A100_PLL_VIDEO0_REG,
SUN50I_A100_PLL_VIDEO1_REG,
SUN50I_A100_PLL_VIDEO2_REG,
SUN50I_A100_PLL_VIDEO3_REG,
};
static const u32 sun50i_a100_usb2_clk_regs[] = {
SUN50I_A100_USB0_CLK_REG,
SUN50I_A100_USB1_CLK_REG,
};
static struct ccu_pll_nb sun50i_a100_pll_cpu_nb = {
.common = &pll_cpux_clk.common,
/* copy from pll_cpux_clk */
.enable = BIT(27),
.lock = BIT(28),
};
static struct ccu_mux_nb sun50i_a100_cpu_nb = {
.common = &cpux_clk.common,
.cm = &cpux_clk.mux,
.delay_us = 1,
.bypass_index = 4, /* index of pll periph0 */
};
static int sun50i_a100_ccu_probe(struct platform_device *pdev)
{
void __iomem *reg;
u32 val;
int i, ret;
reg = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(reg))
return PTR_ERR(reg);
/*
* Enable lock and enable bits on all PLLs.
*
* Due to the current design, multiple PLLs share one power switch,
* so switching PLL is easy to cause stability problems.
* When initializing, we enable them by default. When disable,
* we only turn off the output of PLL.
*/
for (i = 0; i < ARRAY_SIZE(sun50i_a100_pll_regs); i++) {
val = readl(reg + sun50i_a100_pll_regs[i]);
val |= SUN50I_A100_PLL_LOCK_ENABLE | SUN50I_A100_PLL_ENABLE;
writel(val, reg + sun50i_a100_pll_regs[i]);
}
/*
* In order to pass the EMI certification, the SDM function of
* the peripheral 1 bus is enabled, and the frequency is still
* calculated using the previous division factor.
*/
writel(SUN50I_A100_PLL_PERIPH1_PATTERN0,
reg + SUN50I_A100_PLL_PERIPH1_PATTERN0_REG);
val = readl(reg + SUN50I_A100_PLL_PERIPH1_REG);
val |= SUN50I_A100_PLL_SDM_ENABLE;
writel(val, reg + SUN50I_A100_PLL_PERIPH1_REG);
/*
* Force the output divider of video PLLs to 0.
*
* See the comment before pll-video0 definition for the reason.
*/
for (i = 0; i < ARRAY_SIZE(sun50i_a100_pll_video_regs); i++) {
val = readl(reg + sun50i_a100_pll_video_regs[i]);
val &= ~BIT(0);
writel(val, reg + sun50i_a100_pll_video_regs[i]);
}
/*
* Enforce m1 = 0, m0 = 1 for Audio PLL
*
* See the comment before pll-audio definition for the reason.
*/
val = readl(reg + SUN50I_A100_PLL_AUDIO_REG);
val &= ~BIT(1);
val |= BIT(0);
writel(val, reg + SUN50I_A100_PLL_AUDIO_REG);
/*
* Force OHCI 12M clock sources to 00 (12MHz divided from 48MHz)
*
* This clock mux is still mysterious, and the code just enforces
* it to have a valid clock parent.
*/
for (i = 0; i < ARRAY_SIZE(sun50i_a100_usb2_clk_regs); i++) {
val = readl(reg + sun50i_a100_usb2_clk_regs[i]);
val &= ~GENMASK(25, 24);
writel(val, reg + sun50i_a100_usb2_clk_regs[i]);
}
ret = sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_a100_ccu_desc);
if (ret)
return ret;
/* Gate then ungate PLL CPU after any rate changes */
ccu_pll_notifier_register(&sun50i_a100_pll_cpu_nb);
/* Reparent CPU during PLL CPU rate changes */
ccu_mux_notifier_register(pll_cpux_clk.common.hw.clk,
&sun50i_a100_cpu_nb);
return 0;
}
static const struct of_device_id sun50i_a100_ccu_ids[] = {
{ .compatible = "allwinner,sun50i-a100-ccu" },
{ }
};
static struct platform_driver sun50i_a100_ccu_driver = {
.probe = sun50i_a100_ccu_probe,
.driver = {
.name = "sun50i-a100-ccu",
.of_match_table = sun50i_a100_ccu_ids,
},
};
module_platform_driver(sun50i_a100_ccu_driver);