linux/drivers/soc/qcom/ramp_controller.c
Linus Torvalds e4c8d01865 ARM: SoC drivers for 6.5
Nothing surprising in the SoC specific drivers, with the usual updates:
 
  * Added or improved SoC driver support for Tegra234, Exynos4121, RK3588,
    as well as multiple Mediatek and Qualcomm chips
 
  * SCMI firmware gains support for multiple SMC/HVC transport and version
    3.2 of the protocol
 
  * Cleanups amd minor changes for the reset controller, memory controller,
    firmware and sram drivers
 
  * Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
    amlogic and renesas SoC specific drivers
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSdmbIACgkQYKtH/8kJ
 UicewQ/6Aq8j5pBFYBimZoyQ0bi9z+prGrHoDDYLew2vKjtOXJl5z7ZnM3J1oyPt
 Zvis3IaGkHJCuuqotPdsquZrzHq8slzXzwkHPfHORJBC4gV0V/vMS8w32tO5FfTq
 ULrMyWnbsU7Udeywc2xuEpAoC9+bXX9brnCpa3H41peIGZKM+0g7EE6FASt3YaOk
 O+ZMSGqF8QbCqSQrUH3GudFlFMy/VxIvwuUsbLt8aNkRACunQZXVgUdArvLV49nX
 SElFN7hOVRoVDv0rgYMxlwElymrta/kMyjLba8GU1GIhzyDGozVqIJQAnsQ3f6CC
 yyzaJm27zzJH0mx9jx4W+JLBdjqDL4ctE2WyllRVIpTGYMHiMQtutHNwtNupIuD5
 j9j/fIVQWZqOdWXnA6V/CHYN1MZBRTH3KQcnLlYPC01dWKThPDnrHGfwOkfsrwtN
 zuERJJ+gd5b8KW4dmy1ueDOSB8162LxbS7iHxpOBGySmqVOYj3XUqACZhKRfXfIQ
 BVj9punCE/gO2fMb9IZByjeOzgtV+PBRmPxoglyaGkT4fVfL06kEbpKFYbXXq9b/
 aAS/U84gGr8ebWsOXszwDnBzTZRzjMVv/T9KDTTJuWbBEPNyCR7fUG0cZ50rSKnJ
 2cTPe3a0sS6LaBt71qfExCIfxG+cJ2c3N1U5/jb2C49Aob45obs=
 =zvLr
 -----END PGP SIGNATURE-----

Merge tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "Nothing surprising in the SoC specific drivers, with the usual
  updates:

   - Added or improved SoC driver support for Tegra234, Exynos4121,
     RK3588, as well as multiple Mediatek and Qualcomm chips

   - SCMI firmware gains support for multiple SMC/HVC transport and
     version 3.2 of the protocol

   - Cleanups amd minor changes for the reset controller, memory
     controller, firmware and sram drivers

   - Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
     amlogic and renesas SoC specific drivers"

* tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (118 commits)
  dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
  MAINTAINERS: add PHY-related files to Amlogic SoC file list
  drivers: meson: secure-pwrc: always enable DMA domain
  tee: optee: Use kmemdup() to replace kmalloc + memcpy
  soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer
  dt-bindings: sram: qcom,imem: document qdu1000
  soc: qcom: icc-bwmon: Fix MSM8998 count unit
  dt-bindings: soc: qcom,rpmh-rsc: Require power-domains
  soc: qcom: socinfo: Add Soc ID for IPQ5300
  dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300
  soc: qcom: Fix a IS_ERR() vs NULL bug in probe
  soc: qcom: socinfo: Add support for new fields in revision 19
  soc: qcom: socinfo: Add support for new fields in revision 18
  dt-bindings: firmware: scm: Add compatible for SDX75
  soc: qcom: mdt_loader: Fix split image detection
  dt-bindings: memory-controllers: drop unneeded quotes
  soc: rockchip: dtpm: use C99 array init syntax
  firmware: tegra: bpmp: Add support for DRAM MRQ GSCs
  soc/tegra: pmc: Use devm_clk_notifier_register()
  soc/tegra: pmc: Simplify debugfs initialization
  ...
2023-06-29 15:22:19 -07:00

347 lines
9.1 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Qualcomm Ramp Controller driver
* Copyright (c) 2022, AngeloGioacchino Del Regno
* <angelogioacchino.delregno@collabora.com>
*/
#include <linux/bitfield.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/types.h>
#define RC_UPDATE_EN BIT(0)
#define RC_ROOT_EN BIT(1)
#define RC_REG_CFG_UPDATE 0x60
#define RC_CFG_UPDATE_EN BIT(8)
#define RC_CFG_ACK GENMASK(31, 16)
#define RC_DCVS_CFG_SID 2
#define RC_LINK_SID 3
#define RC_LMH_SID 6
#define RC_DFS_SID 14
#define RC_UPDATE_TIMEOUT_US 500
/**
* struct qcom_ramp_controller_desc - SoC specific parameters
* @cfg_dfs_sid: Dynamic Frequency Scaling SID configuration
* @cfg_link_sid: Link SID configuration
* @cfg_lmh_sid: Limits Management hardware SID configuration
* @cfg_ramp_en: Ramp Controller enable sequence
* @cfg_ramp_dis: Ramp Controller disable sequence
* @cmd_reg: Command register offset
* @num_dfs_sids: Number of DFS SIDs (max 8)
* @num_link_sids: Number of Link SIDs (max 3)
* @num_lmh_sids: Number of LMh SIDs (max 8)
* @num_ramp_en: Number of entries in enable sequence
* @num_ramp_dis: Number of entries in disable sequence
*/
struct qcom_ramp_controller_desc {
const struct reg_sequence *cfg_dfs_sid;
const struct reg_sequence *cfg_link_sid;
const struct reg_sequence *cfg_lmh_sid;
const struct reg_sequence *cfg_ramp_en;
const struct reg_sequence *cfg_ramp_dis;
u8 cmd_reg;
u8 num_dfs_sids;
u8 num_link_sids;
u8 num_lmh_sids;
u8 num_ramp_en;
u8 num_ramp_dis;
};
/**
* struct qcom_ramp_controller - Main driver structure
* @regmap: Regmap handle
* @desc: SoC specific parameters
*/
struct qcom_ramp_controller {
struct regmap *regmap;
const struct qcom_ramp_controller_desc *desc;
};
/**
* rc_wait_for_update() - Wait for Ramp Controller root update
* @qrc: Main driver structure
*
* Return: Zero for success or negative number for failure
*/
static int rc_wait_for_update(struct qcom_ramp_controller *qrc)
{
const struct qcom_ramp_controller_desc *d = qrc->desc;
struct regmap *r = qrc->regmap;
u32 val;
int ret;
ret = regmap_set_bits(r, d->cmd_reg, RC_ROOT_EN);
if (ret)
return ret;
return regmap_read_poll_timeout(r, d->cmd_reg, val, !(val & RC_UPDATE_EN),
1, RC_UPDATE_TIMEOUT_US);
}
/**
* rc_set_cfg_update() - Ramp Controller configuration update
* @qrc: Main driver structure
* @ce: Configuration entry to update
*
* Return: Zero for success or negative number for failure
*/
static int rc_set_cfg_update(struct qcom_ramp_controller *qrc, u8 ce)
{
const struct qcom_ramp_controller_desc *d = qrc->desc;
struct regmap *r = qrc->regmap;
u32 ack, val;
int ret;
/* The ack bit is between bits 16-31 of RC_REG_CFG_UPDATE */
ack = FIELD_PREP(RC_CFG_ACK, BIT(ce));
/* Write the configuration type first... */
ret = regmap_set_bits(r, d->cmd_reg + RC_REG_CFG_UPDATE, ce);
if (ret)
return ret;
/* ...and after that, enable the update bit to sync the changes */
ret = regmap_set_bits(r, d->cmd_reg + RC_REG_CFG_UPDATE, RC_CFG_UPDATE_EN);
if (ret)
return ret;
/* Wait for the changes to go through */
ret = regmap_read_poll_timeout(r, d->cmd_reg + RC_REG_CFG_UPDATE, val,
val & ack, 1, RC_UPDATE_TIMEOUT_US);
if (ret)
return ret;
/*
* Configuration update success! The CFG_UPDATE register will not be
* cleared automatically upon applying the configuration, so we have
* to do that manually in order to leave the ramp controller in a
* predictable and clean state.
*/
ret = regmap_write(r, d->cmd_reg + RC_REG_CFG_UPDATE, 0);
if (ret)
return ret;
/* Wait for the update bit cleared ack */
return regmap_read_poll_timeout(r, d->cmd_reg + RC_REG_CFG_UPDATE,
val, !(val & RC_CFG_ACK), 1,
RC_UPDATE_TIMEOUT_US);
}
/**
* rc_write_cfg - Send configuration sequence
* @qrc: Main driver structure
* @seq: Register sequence to send before asking for update
* @ce: Configuration SID
* @nsids: Total number of SIDs
*
* Returns: Zero for success or negative number for error
*/
static int rc_write_cfg(struct qcom_ramp_controller *qrc,
const struct reg_sequence *seq,
u16 ce, u8 nsids)
{
int ret;
u8 i;
/* Check if, and wait until the ramp controller is ready */
ret = rc_wait_for_update(qrc);
if (ret)
return ret;
/* Write the sequence */
ret = regmap_multi_reg_write(qrc->regmap, seq, nsids);
if (ret)
return ret;
/* Pull the trigger: do config update starting from the last sid */
for (i = 0; i < nsids; i++) {
ret = rc_set_cfg_update(qrc, (u8)ce - i);
if (ret)
return ret;
}
return 0;
}
/**
* rc_ramp_ctrl_enable() - Enable Ramp up/down Control
* @qrc: Main driver structure
*
* Return: Zero for success or negative number for error
*/
static int rc_ramp_ctrl_enable(struct qcom_ramp_controller *qrc)
{
const struct qcom_ramp_controller_desc *d = qrc->desc;
int i, ret;
for (i = 0; i < d->num_ramp_en; i++) {
ret = rc_write_cfg(qrc, &d->cfg_ramp_en[i], RC_DCVS_CFG_SID, 1);
if (ret)
return ret;
}
return 0;
}
/**
* qcom_ramp_controller_start() - Initialize and start the ramp controller
* @qrc: Main driver structure
*
* The Ramp Controller needs to be initialized by programming the relevant
* registers with SoC-specific configuration: once programming is done,
* the hardware will take care of the rest (no further handling required).
*
* Return: Zero for success or negative number for error
*/
static int qcom_ramp_controller_start(struct qcom_ramp_controller *qrc)
{
const struct qcom_ramp_controller_desc *d = qrc->desc;
int ret;
/* Program LMH, DFS, Link SIDs */
ret = rc_write_cfg(qrc, d->cfg_lmh_sid, RC_LMH_SID, d->num_lmh_sids);
if (ret)
return ret;
ret = rc_write_cfg(qrc, d->cfg_dfs_sid, RC_DFS_SID, d->num_dfs_sids);
if (ret)
return ret;
ret = rc_write_cfg(qrc, d->cfg_link_sid, RC_LINK_SID, d->num_link_sids);
if (ret)
return ret;
/* Everything is ready! Enable the ramp up/down control */
return rc_ramp_ctrl_enable(qrc);
}
static const struct regmap_config qrc_regmap_config = {
.reg_bits = 32,
.reg_stride = 4,
.val_bits = 32,
.max_register = 0x68,
.fast_io = true,
};
static const struct reg_sequence msm8976_cfg_dfs_sid[] = {
{ 0x10, 0xfefebff7 },
{ 0x14, 0xfdff7fef },
{ 0x18, 0xfbffdefb },
{ 0x1c, 0xb69b5555 },
{ 0x20, 0x24929249 },
{ 0x24, 0x49241112 },
{ 0x28, 0x11112111 },
{ 0x2c, 0x8102 }
};
static const struct reg_sequence msm8976_cfg_link_sid[] = {
{ 0x40, 0xfc987 }
};
static const struct reg_sequence msm8976_cfg_lmh_sid[] = {
{ 0x30, 0x77706db },
{ 0x34, 0x5550249 },
{ 0x38, 0x111 }
};
static const struct reg_sequence msm8976_cfg_ramp_en[] = {
{ 0x50, 0x800 }, /* pre_en */
{ 0x50, 0xc00 }, /* en */
{ 0x50, 0x400 } /* post_en */
};
static const struct reg_sequence msm8976_cfg_ramp_dis[] = {
{ 0x50, 0x0 }
};
static const struct qcom_ramp_controller_desc msm8976_rc_cfg = {
.cfg_dfs_sid = msm8976_cfg_dfs_sid,
.num_dfs_sids = ARRAY_SIZE(msm8976_cfg_dfs_sid),
.cfg_link_sid = msm8976_cfg_link_sid,
.num_link_sids = ARRAY_SIZE(msm8976_cfg_link_sid),
.cfg_lmh_sid = msm8976_cfg_lmh_sid,
.num_lmh_sids = ARRAY_SIZE(msm8976_cfg_lmh_sid),
.cfg_ramp_en = msm8976_cfg_ramp_en,
.num_ramp_en = ARRAY_SIZE(msm8976_cfg_ramp_en),
.cfg_ramp_dis = msm8976_cfg_ramp_dis,
.num_ramp_dis = ARRAY_SIZE(msm8976_cfg_ramp_dis),
.cmd_reg = 0x0,
};
static int qcom_ramp_controller_probe(struct platform_device *pdev)
{
struct qcom_ramp_controller *qrc;
void __iomem *base;
base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(base))
return PTR_ERR(base);
qrc = devm_kmalloc(&pdev->dev, sizeof(*qrc), GFP_KERNEL);
if (!qrc)
return -ENOMEM;
qrc->desc = device_get_match_data(&pdev->dev);
if (!qrc->desc)
return -EINVAL;
qrc->regmap = devm_regmap_init_mmio(&pdev->dev, base, &qrc_regmap_config);
if (IS_ERR(qrc->regmap))
return PTR_ERR(qrc->regmap);
platform_set_drvdata(pdev, qrc);
return qcom_ramp_controller_start(qrc);
}
static void qcom_ramp_controller_remove(struct platform_device *pdev)
{
struct qcom_ramp_controller *qrc = platform_get_drvdata(pdev);
int ret;
ret = rc_write_cfg(qrc, qrc->desc->cfg_ramp_dis,
RC_DCVS_CFG_SID, qrc->desc->num_ramp_dis);
if (ret)
dev_err(&pdev->dev, "Failed to send disable sequence\n");
}
static const struct of_device_id qcom_ramp_controller_match_table[] = {
{ .compatible = "qcom,msm8976-ramp-controller", .data = &msm8976_rc_cfg },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, qcom_ramp_controller_match_table);
static struct platform_driver qcom_ramp_controller_driver = {
.driver = {
.name = "qcom-ramp-controller",
.of_match_table = qcom_ramp_controller_match_table,
.suppress_bind_attrs = true,
},
.probe = qcom_ramp_controller_probe,
.remove_new = qcom_ramp_controller_remove,
};
static int __init qcom_ramp_controller_init(void)
{
return platform_driver_register(&qcom_ramp_controller_driver);
}
arch_initcall(qcom_ramp_controller_init);
MODULE_AUTHOR("AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>");
MODULE_DESCRIPTION("Qualcomm Ramp Controller driver");
MODULE_LICENSE("GPL");