linux/drivers/acpi/acpica/dsfield.c
Bob Moore 5df7e6cb42 ACPICA: Remove obsolete ACPI_INTEGER (acpi_integer) type
This type was introduced as the code was migrated from ACPI 1.0
(with 32-bit AML integers) to ACPI 2.0 (with 64-bit integers). It
is now obsolete and this change removes it from the ACPICA code
base, replaced by u64.  The original typedef has been retained
for now for compatibility with existing device driver code.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-01-22 12:30:06 -05:00

657 lines
19 KiB
C

/******************************************************************************
*
* Module Name: dsfield - Dispatcher field routines
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include "accommon.h"
#include "amlcode.h"
#include "acdispat.h"
#include "acinterp.h"
#include "acnamesp.h"
#include "acparser.h"
#define _COMPONENT ACPI_DISPATCHER
ACPI_MODULE_NAME("dsfield")
/* Local prototypes */
static acpi_status
acpi_ds_get_field_names(struct acpi_create_field_info *info,
struct acpi_walk_state *walk_state,
union acpi_parse_object *arg);
/*******************************************************************************
*
* FUNCTION: acpi_ds_create_buffer_field
*
* PARAMETERS: Op - Current parse op (create_xXField)
* walk_state - Current state
*
* RETURN: Status
*
* DESCRIPTION: Execute the create_field operators:
* create_bit_field_op,
* create_byte_field_op,
* create_word_field_op,
* create_dword_field_op,
* create_qword_field_op,
* create_field_op (all of which define a field in a buffer)
*
******************************************************************************/
acpi_status
acpi_ds_create_buffer_field(union acpi_parse_object *op,
struct acpi_walk_state *walk_state)
{
union acpi_parse_object *arg;
struct acpi_namespace_node *node;
acpi_status status;
union acpi_operand_object *obj_desc;
union acpi_operand_object *second_desc = NULL;
u32 flags;
ACPI_FUNCTION_TRACE(ds_create_buffer_field);
/*
* Get the name_string argument (name of the new buffer_field)
*/
if (op->common.aml_opcode == AML_CREATE_FIELD_OP) {
/* For create_field, name is the 4th argument */
arg = acpi_ps_get_arg(op, 3);
} else {
/* For all other create_xXXField operators, name is the 3rd argument */
arg = acpi_ps_get_arg(op, 2);
}
if (!arg) {
return_ACPI_STATUS(AE_AML_NO_OPERAND);
}
if (walk_state->deferred_node) {
node = walk_state->deferred_node;
status = AE_OK;
} else {
/* Execute flag should always be set when this function is entered */
if (!(walk_state->parse_flags & ACPI_PARSE_EXECUTE)) {
return_ACPI_STATUS(AE_AML_INTERNAL);
}
/* Creating new namespace node, should not already exist */
flags = ACPI_NS_NO_UPSEARCH | ACPI_NS_DONT_OPEN_SCOPE |
ACPI_NS_ERROR_IF_FOUND;
/*
* Mark node temporary if we are executing a normal control
* method. (Don't mark if this is a module-level code method)
*/
if (walk_state->method_node &&
!(walk_state->parse_flags & ACPI_PARSE_MODULE_LEVEL)) {
flags |= ACPI_NS_TEMPORARY;
}
/* Enter the name_string into the namespace */
status =
acpi_ns_lookup(walk_state->scope_info,
arg->common.value.string, ACPI_TYPE_ANY,
ACPI_IMODE_LOAD_PASS1, flags, walk_state,
&node);
if (ACPI_FAILURE(status)) {
ACPI_ERROR_NAMESPACE(arg->common.value.string, status);
return_ACPI_STATUS(status);
}
}
/*
* We could put the returned object (Node) on the object stack for later,
* but for now, we will put it in the "op" object that the parser uses,
* so we can get it again at the end of this scope.
*/
op->common.node = node;
/*
* If there is no object attached to the node, this node was just created
* and we need to create the field object. Otherwise, this was a lookup
* of an existing node and we don't want to create the field object again.
*/
obj_desc = acpi_ns_get_attached_object(node);
if (obj_desc) {
return_ACPI_STATUS(AE_OK);
}
/*
* The Field definition is not fully parsed at this time.
* (We must save the address of the AML for the buffer and index operands)
*/
/* Create the buffer field object */
obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_BUFFER_FIELD);
if (!obj_desc) {
status = AE_NO_MEMORY;
goto cleanup;
}
/*
* Remember location in AML stream of the field unit opcode and operands --
* since the buffer and index operands must be evaluated.
*/
second_desc = obj_desc->common.next_object;
second_desc->extra.aml_start = op->named.data;
second_desc->extra.aml_length = op->named.length;
obj_desc->buffer_field.node = node;
/* Attach constructed field descriptors to parent node */
status = acpi_ns_attach_object(node, obj_desc, ACPI_TYPE_BUFFER_FIELD);
if (ACPI_FAILURE(status)) {
goto cleanup;
}
cleanup:
/* Remove local reference to the object */
acpi_ut_remove_reference(obj_desc);
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ds_get_field_names
*
* PARAMETERS: Info - create_field info structure
* ` walk_state - Current method state
* Arg - First parser arg for the field name list
*
* RETURN: Status
*
* DESCRIPTION: Process all named fields in a field declaration. Names are
* entered into the namespace.
*
******************************************************************************/
static acpi_status
acpi_ds_get_field_names(struct acpi_create_field_info *info,
struct acpi_walk_state *walk_state,
union acpi_parse_object *arg)
{
acpi_status status;
u64 position;
ACPI_FUNCTION_TRACE_PTR(ds_get_field_names, info);
/* First field starts at bit zero */
info->field_bit_position = 0;
/* Process all elements in the field list (of parse nodes) */
while (arg) {
/*
* Three types of field elements are handled:
* 1) Offset - specifies a bit offset
* 2) access_as - changes the access mode
* 3) Name - Enters a new named field into the namespace
*/
switch (arg->common.aml_opcode) {
case AML_INT_RESERVEDFIELD_OP:
position = (u64) info->field_bit_position
+ (u64) arg->common.value.size;
if (position > ACPI_UINT32_MAX) {
ACPI_ERROR((AE_INFO,
"Bit offset within field too large (> 0xFFFFFFFF)"));
return_ACPI_STATUS(AE_SUPPORT);
}
info->field_bit_position = (u32) position;
break;
case AML_INT_ACCESSFIELD_OP:
/*
* Get a new access_type and access_attribute -- to be used for all
* field units that follow, until field end or another access_as
* keyword.
*
* In field_flags, preserve the flag bits other than the
* ACCESS_TYPE bits
*/
info->field_flags = (u8)
((info->
field_flags & ~(AML_FIELD_ACCESS_TYPE_MASK)) |
((u8) ((u32) arg->common.value.integer >> 8)));
info->attribute = (u8) (arg->common.value.integer);
break;
case AML_INT_NAMEDFIELD_OP:
/* Lookup the name, it should already exist */
status = acpi_ns_lookup(walk_state->scope_info,
(char *)&arg->named.name,
info->field_type,
ACPI_IMODE_EXECUTE,
ACPI_NS_DONT_OPEN_SCOPE,
walk_state, &info->field_node);
if (ACPI_FAILURE(status)) {
ACPI_ERROR_NAMESPACE((char *)&arg->named.name,
status);
return_ACPI_STATUS(status);
} else {
arg->common.node = info->field_node;
info->field_bit_length = arg->common.value.size;
/*
* If there is no object attached to the node, this node was
* just created and we need to create the field object.
* Otherwise, this was a lookup of an existing node and we
* don't want to create the field object again.
*/
if (!acpi_ns_get_attached_object
(info->field_node)) {
status = acpi_ex_prep_field_value(info);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
}
}
/* Keep track of bit position for the next field */
position = (u64) info->field_bit_position
+ (u64) arg->common.value.size;
if (position > ACPI_UINT32_MAX) {
ACPI_ERROR((AE_INFO,
"Field [%4.4s] bit offset too large (> 0xFFFFFFFF)",
ACPI_CAST_PTR(char,
&info->field_node->
name)));
return_ACPI_STATUS(AE_SUPPORT);
}
info->field_bit_position += info->field_bit_length;
break;
default:
ACPI_ERROR((AE_INFO,
"Invalid opcode in field list: %X",
arg->common.aml_opcode));
return_ACPI_STATUS(AE_AML_BAD_OPCODE);
}
arg = arg->common.next;
}
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_ds_create_field
*
* PARAMETERS: Op - Op containing the Field definition and args
* region_node - Object for the containing Operation Region
* ` walk_state - Current method state
*
* RETURN: Status
*
* DESCRIPTION: Create a new field in the specified operation region
*
******************************************************************************/
acpi_status
acpi_ds_create_field(union acpi_parse_object *op,
struct acpi_namespace_node *region_node,
struct acpi_walk_state *walk_state)
{
acpi_status status;
union acpi_parse_object *arg;
struct acpi_create_field_info info;
ACPI_FUNCTION_TRACE_PTR(ds_create_field, op);
/* First arg is the name of the parent op_region (must already exist) */
arg = op->common.value.arg;
if (!region_node) {
status =
acpi_ns_lookup(walk_state->scope_info,
arg->common.value.name, ACPI_TYPE_REGION,
ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT,
walk_state, &region_node);
if (ACPI_FAILURE(status)) {
ACPI_ERROR_NAMESPACE(arg->common.value.name, status);
return_ACPI_STATUS(status);
}
}
/* Second arg is the field flags */
arg = arg->common.next;
info.field_flags = (u8) arg->common.value.integer;
info.attribute = 0;
/* Each remaining arg is a Named Field */
info.field_type = ACPI_TYPE_LOCAL_REGION_FIELD;
info.region_node = region_node;
status = acpi_ds_get_field_names(&info, walk_state, arg->common.next);
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ds_init_field_objects
*
* PARAMETERS: Op - Op containing the Field definition and args
* ` walk_state - Current method state
*
* RETURN: Status
*
* DESCRIPTION: For each "Field Unit" name in the argument list that is
* part of the field declaration, enter the name into the
* namespace.
*
******************************************************************************/
acpi_status
acpi_ds_init_field_objects(union acpi_parse_object *op,
struct acpi_walk_state *walk_state)
{
acpi_status status;
union acpi_parse_object *arg = NULL;
struct acpi_namespace_node *node;
u8 type = 0;
u32 flags;
ACPI_FUNCTION_TRACE_PTR(ds_init_field_objects, op);
/* Execute flag should always be set when this function is entered */
if (!(walk_state->parse_flags & ACPI_PARSE_EXECUTE)) {
if (walk_state->parse_flags & ACPI_PARSE_DEFERRED_OP) {
/* bank_field Op is deferred, just return OK */
return_ACPI_STATUS(AE_OK);
}
return_ACPI_STATUS(AE_AML_INTERNAL);
}
/*
* Get the field_list argument for this opcode. This is the start of the
* list of field elements.
*/
switch (walk_state->opcode) {
case AML_FIELD_OP:
arg = acpi_ps_get_arg(op, 2);
type = ACPI_TYPE_LOCAL_REGION_FIELD;
break;
case AML_BANK_FIELD_OP:
arg = acpi_ps_get_arg(op, 4);
type = ACPI_TYPE_LOCAL_BANK_FIELD;
break;
case AML_INDEX_FIELD_OP:
arg = acpi_ps_get_arg(op, 3);
type = ACPI_TYPE_LOCAL_INDEX_FIELD;
break;
default:
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
/* Creating new namespace node(s), should not already exist */
flags = ACPI_NS_NO_UPSEARCH | ACPI_NS_DONT_OPEN_SCOPE |
ACPI_NS_ERROR_IF_FOUND;
/*
* Mark node(s) temporary if we are executing a normal control
* method. (Don't mark if this is a module-level code method)
*/
if (walk_state->method_node &&
!(walk_state->parse_flags & ACPI_PARSE_MODULE_LEVEL)) {
flags |= ACPI_NS_TEMPORARY;
}
/*
* Walk the list of entries in the field_list
* Note: field_list can be of zero length. In this case, Arg will be NULL.
*/
while (arg) {
/*
* Ignore OFFSET and ACCESSAS terms here; we are only interested in the
* field names in order to enter them into the namespace.
*/
if (arg->common.aml_opcode == AML_INT_NAMEDFIELD_OP) {
status = acpi_ns_lookup(walk_state->scope_info,
(char *)&arg->named.name, type,
ACPI_IMODE_LOAD_PASS1, flags,
walk_state, &node);
if (ACPI_FAILURE(status)) {
ACPI_ERROR_NAMESPACE((char *)&arg->named.name,
status);
if (status != AE_ALREADY_EXISTS) {
return_ACPI_STATUS(status);
}
/* Name already exists, just ignore this error */
status = AE_OK;
}
arg->common.node = node;
}
/* Get the next field element in the list */
arg = arg->common.next;
}
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_ds_create_bank_field
*
* PARAMETERS: Op - Op containing the Field definition and args
* region_node - Object for the containing Operation Region
* walk_state - Current method state
*
* RETURN: Status
*
* DESCRIPTION: Create a new bank field in the specified operation region
*
******************************************************************************/
acpi_status
acpi_ds_create_bank_field(union acpi_parse_object *op,
struct acpi_namespace_node *region_node,
struct acpi_walk_state *walk_state)
{
acpi_status status;
union acpi_parse_object *arg;
struct acpi_create_field_info info;
ACPI_FUNCTION_TRACE_PTR(ds_create_bank_field, op);
/* First arg is the name of the parent op_region (must already exist) */
arg = op->common.value.arg;
if (!region_node) {
status =
acpi_ns_lookup(walk_state->scope_info,
arg->common.value.name, ACPI_TYPE_REGION,
ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT,
walk_state, &region_node);
if (ACPI_FAILURE(status)) {
ACPI_ERROR_NAMESPACE(arg->common.value.name, status);
return_ACPI_STATUS(status);
}
}
/* Second arg is the Bank Register (Field) (must already exist) */
arg = arg->common.next;
status =
acpi_ns_lookup(walk_state->scope_info, arg->common.value.string,
ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE,
ACPI_NS_SEARCH_PARENT, walk_state,
&info.register_node);
if (ACPI_FAILURE(status)) {
ACPI_ERROR_NAMESPACE(arg->common.value.string, status);
return_ACPI_STATUS(status);
}
/*
* Third arg is the bank_value
* This arg is a term_arg, not a constant
* It will be evaluated later, by acpi_ds_eval_bank_field_operands
*/
arg = arg->common.next;
/* Fourth arg is the field flags */
arg = arg->common.next;
info.field_flags = (u8) arg->common.value.integer;
/* Each remaining arg is a Named Field */
info.field_type = ACPI_TYPE_LOCAL_BANK_FIELD;
info.region_node = region_node;
/*
* Use Info.data_register_node to store bank_field Op
* It's safe because data_register_node will never be used when create bank field
* We store aml_start and aml_length in the bank_field Op for late evaluation
* Used in acpi_ex_prep_field_value(Info)
*
* TBD: Or, should we add a field in struct acpi_create_field_info, like "void *ParentOp"?
*/
info.data_register_node = (struct acpi_namespace_node *)op;
status = acpi_ds_get_field_names(&info, walk_state, arg->common.next);
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ds_create_index_field
*
* PARAMETERS: Op - Op containing the Field definition and args
* region_node - Object for the containing Operation Region
* ` walk_state - Current method state
*
* RETURN: Status
*
* DESCRIPTION: Create a new index field in the specified operation region
*
******************************************************************************/
acpi_status
acpi_ds_create_index_field(union acpi_parse_object *op,
struct acpi_namespace_node *region_node,
struct acpi_walk_state *walk_state)
{
acpi_status status;
union acpi_parse_object *arg;
struct acpi_create_field_info info;
ACPI_FUNCTION_TRACE_PTR(ds_create_index_field, op);
/* First arg is the name of the Index register (must already exist) */
arg = op->common.value.arg;
status =
acpi_ns_lookup(walk_state->scope_info, arg->common.value.string,
ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE,
ACPI_NS_SEARCH_PARENT, walk_state,
&info.register_node);
if (ACPI_FAILURE(status)) {
ACPI_ERROR_NAMESPACE(arg->common.value.string, status);
return_ACPI_STATUS(status);
}
/* Second arg is the data register (must already exist) */
arg = arg->common.next;
status =
acpi_ns_lookup(walk_state->scope_info, arg->common.value.string,
ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE,
ACPI_NS_SEARCH_PARENT, walk_state,
&info.data_register_node);
if (ACPI_FAILURE(status)) {
ACPI_ERROR_NAMESPACE(arg->common.value.string, status);
return_ACPI_STATUS(status);
}
/* Next arg is the field flags */
arg = arg->common.next;
info.field_flags = (u8) arg->common.value.integer;
/* Each remaining arg is a Named Field */
info.field_type = ACPI_TYPE_LOCAL_INDEX_FIELD;
info.region_node = region_node;
status = acpi_ds_get_field_names(&info, walk_state, arg->common.next);
return_ACPI_STATUS(status);
}