linux/arch/arm/mm/proc-v7.S
Will Deacon bf3f0f332f ARM: 7784/1: mm: ensure SMP alternates assemble to exactly 4 bytes with Thumb-2
Commit ae8a8b9553 ("ARM: 7691/1: mm: kill unused TLB_CAN_READ_FROM_L1_CACHE
and use ALT_SMP instead") added early function returns for page table
cache flushing operations on ARMv7 SMP CPUs.

Unfortunately, when targetting Thumb-2, these `mov pc, lr' sequences
assemble to 2 bytes which can lead to corruption of the instruction
stream after code patching.

This patch fixes the alternates to use wide (32-bit) instructions for
Thumb-2, therefore ensuring that the patching code works correctly.

Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-22 14:29:09 +01:00

503 lines
14 KiB
ArmAsm

/*
* linux/arch/arm/mm/proc-v7.S
*
* Copyright (C) 2001 Deep Blue Solutions Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This is the "shell" of the ARMv7 processor support.
*/
#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
#include <asm/hwcap.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include "proc-macros.S"
#ifdef CONFIG_ARM_LPAE
#include "proc-v7-3level.S"
#else
#include "proc-v7-2level.S"
#endif
ENTRY(cpu_v7_proc_init)
mov pc, lr
ENDPROC(cpu_v7_proc_init)
ENTRY(cpu_v7_proc_fin)
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
bic r0, r0, #0x1000 @ ...i............
bic r0, r0, #0x0006 @ .............ca.
mcr p15, 0, r0, c1, c0, 0 @ disable caches
mov pc, lr
ENDPROC(cpu_v7_proc_fin)
/*
* cpu_v7_reset(loc)
*
* Perform a soft reset of the system. Put the CPU into the
* same state as it would be if it had been reset, and branch
* to what would be the reset vector.
*
* - loc - location to jump to for soft reset
*
* This code must be executed using a flat identity mapping with
* caches disabled.
*/
.align 5
.pushsection .idmap.text, "ax"
ENTRY(cpu_v7_reset)
mrc p15, 0, r1, c1, c0, 0 @ ctrl register
bic r1, r1, #0x1 @ ...............m
THUMB( bic r1, r1, #1 << 30 ) @ SCTLR.TE (Thumb exceptions)
mcr p15, 0, r1, c1, c0, 0 @ disable MMU
isb
bx r0
ENDPROC(cpu_v7_reset)
.popsection
/*
* cpu_v7_do_idle()
*
* Idle the processor (eg, wait for interrupt).
*
* IRQs are already disabled.
*/
ENTRY(cpu_v7_do_idle)
dsb @ WFI may enter a low-power mode
wfi
mov pc, lr
ENDPROC(cpu_v7_do_idle)
ENTRY(cpu_v7_dcache_clean_area)
ALT_SMP(W(nop)) @ MP extensions imply L1 PTW
ALT_UP_B(1f)
mov pc, lr
1: dcache_line_size r2, r3
2: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, r2
subs r1, r1, r2
bhi 2b
dsb
mov pc, lr
ENDPROC(cpu_v7_dcache_clean_area)
string cpu_v7_name, "ARMv7 Processor"
.align
/* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */
.globl cpu_v7_suspend_size
.equ cpu_v7_suspend_size, 4 * 8
#ifdef CONFIG_ARM_CPU_SUSPEND
ENTRY(cpu_v7_do_suspend)
stmfd sp!, {r4 - r10, lr}
mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
mrc p15, 0, r5, c13, c0, 3 @ User r/o thread ID
stmia r0!, {r4 - r5}
#ifdef CONFIG_MMU
mrc p15, 0, r6, c3, c0, 0 @ Domain ID
mrc p15, 0, r7, c2, c0, 1 @ TTB 1
mrc p15, 0, r11, c2, c0, 2 @ TTB control register
#endif
mrc p15, 0, r8, c1, c0, 0 @ Control register
mrc p15, 0, r9, c1, c0, 1 @ Auxiliary control register
mrc p15, 0, r10, c1, c0, 2 @ Co-processor access control
stmia r0, {r6 - r11}
ldmfd sp!, {r4 - r10, pc}
ENDPROC(cpu_v7_do_suspend)
ENTRY(cpu_v7_do_resume)
mov ip, #0
mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
mcr p15, 0, ip, c13, c0, 1 @ set reserved context ID
ldmia r0!, {r4 - r5}
mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
mcr p15, 0, r5, c13, c0, 3 @ User r/o thread ID
ldmia r0, {r6 - r11}
#ifdef CONFIG_MMU
mcr p15, 0, ip, c8, c7, 0 @ invalidate TLBs
mcr p15, 0, r6, c3, c0, 0 @ Domain ID
#ifndef CONFIG_ARM_LPAE
ALT_SMP(orr r1, r1, #TTB_FLAGS_SMP)
ALT_UP(orr r1, r1, #TTB_FLAGS_UP)
#endif
mcr p15, 0, r1, c2, c0, 0 @ TTB 0
mcr p15, 0, r7, c2, c0, 1 @ TTB 1
mcr p15, 0, r11, c2, c0, 2 @ TTB control register
ldr r4, =PRRR @ PRRR
ldr r5, =NMRR @ NMRR
mcr p15, 0, r4, c10, c2, 0 @ write PRRR
mcr p15, 0, r5, c10, c2, 1 @ write NMRR
#endif /* CONFIG_MMU */
mrc p15, 0, r4, c1, c0, 1 @ Read Auxiliary control register
teq r4, r9 @ Is it already set?
mcrne p15, 0, r9, c1, c0, 1 @ No, so write it
mcr p15, 0, r10, c1, c0, 2 @ Co-processor access control
isb
dsb
mov r0, r8 @ control register
b cpu_resume_mmu
ENDPROC(cpu_v7_do_resume)
#endif
#ifdef CONFIG_CPU_PJ4B
globl_equ cpu_pj4b_switch_mm, cpu_v7_switch_mm
globl_equ cpu_pj4b_set_pte_ext, cpu_v7_set_pte_ext
globl_equ cpu_pj4b_proc_init, cpu_v7_proc_init
globl_equ cpu_pj4b_proc_fin, cpu_v7_proc_fin
globl_equ cpu_pj4b_reset, cpu_v7_reset
#ifdef CONFIG_PJ4B_ERRATA_4742
ENTRY(cpu_pj4b_do_idle)
dsb @ WFI may enter a low-power mode
wfi
dsb @barrier
mov pc, lr
ENDPROC(cpu_pj4b_do_idle)
#else
globl_equ cpu_pj4b_do_idle, cpu_v7_do_idle
#endif
globl_equ cpu_pj4b_dcache_clean_area, cpu_v7_dcache_clean_area
globl_equ cpu_pj4b_do_suspend, cpu_v7_do_suspend
globl_equ cpu_pj4b_do_resume, cpu_v7_do_resume
globl_equ cpu_pj4b_suspend_size, cpu_v7_suspend_size
#endif
/*
* __v7_setup
*
* Initialise TLB, Caches, and MMU state ready to switch the MMU
* on. Return in r0 the new CP15 C1 control register setting.
*
* This should be able to cover all ARMv7 cores.
*
* It is assumed that:
* - cache type register is implemented
*/
__v7_ca5mp_setup:
__v7_ca9mp_setup:
__v7_cr7mp_setup:
mov r10, #(1 << 0) @ Cache/TLB ops broadcasting
b 1f
__v7_ca7mp_setup:
__v7_ca15mp_setup:
mov r10, #0
1:
#ifdef CONFIG_SMP
ALT_SMP(mrc p15, 0, r0, c1, c0, 1)
ALT_UP(mov r0, #(1 << 6)) @ fake it for UP
tst r0, #(1 << 6) @ SMP/nAMP mode enabled?
orreq r0, r0, #(1 << 6) @ Enable SMP/nAMP mode
orreq r0, r0, r10 @ Enable CPU-specific SMP bits
mcreq p15, 0, r0, c1, c0, 1
#endif
b __v7_setup
__v7_pj4b_setup:
#ifdef CONFIG_CPU_PJ4B
/* Auxiliary Debug Modes Control 1 Register */
#define PJ4B_STATIC_BP (1 << 2) /* Enable Static BP */
#define PJ4B_INTER_PARITY (1 << 8) /* Disable Internal Parity Handling */
#define PJ4B_BCK_OFF_STREX (1 << 5) /* Enable the back off of STREX instr */
#define PJ4B_CLEAN_LINE (1 << 16) /* Disable data transfer for clean line */
/* Auxiliary Debug Modes Control 2 Register */
#define PJ4B_FAST_LDR (1 << 23) /* Disable fast LDR */
#define PJ4B_SNOOP_DATA (1 << 25) /* Do not interleave write and snoop data */
#define PJ4B_CWF (1 << 27) /* Disable Critical Word First feature */
#define PJ4B_OUTSDNG_NC (1 << 29) /* Disable outstanding non cacheable rqst */
#define PJ4B_L1_REP_RR (1 << 30) /* L1 replacement - Strict round robin */
#define PJ4B_AUX_DBG_CTRL2 (PJ4B_SNOOP_DATA | PJ4B_CWF |\
PJ4B_OUTSDNG_NC | PJ4B_L1_REP_RR)
/* Auxiliary Functional Modes Control Register 0 */
#define PJ4B_SMP_CFB (1 << 1) /* Set SMP mode. Join the coherency fabric */
#define PJ4B_L1_PAR_CHK (1 << 2) /* Support L1 parity checking */
#define PJ4B_BROADCAST_CACHE (1 << 8) /* Broadcast Cache and TLB maintenance */
/* Auxiliary Debug Modes Control 0 Register */
#define PJ4B_WFI_WFE (1 << 22) /* WFI/WFE - serve the DVM and back to idle */
/* Auxiliary Debug Modes Control 1 Register */
mrc p15, 1, r0, c15, c1, 1
orr r0, r0, #PJ4B_CLEAN_LINE
orr r0, r0, #PJ4B_BCK_OFF_STREX
orr r0, r0, #PJ4B_INTER_PARITY
bic r0, r0, #PJ4B_STATIC_BP
mcr p15, 1, r0, c15, c1, 1
/* Auxiliary Debug Modes Control 2 Register */
mrc p15, 1, r0, c15, c1, 2
bic r0, r0, #PJ4B_FAST_LDR
orr r0, r0, #PJ4B_AUX_DBG_CTRL2
mcr p15, 1, r0, c15, c1, 2
/* Auxiliary Functional Modes Control Register 0 */
mrc p15, 1, r0, c15, c2, 0
#ifdef CONFIG_SMP
orr r0, r0, #PJ4B_SMP_CFB
#endif
orr r0, r0, #PJ4B_L1_PAR_CHK
orr r0, r0, #PJ4B_BROADCAST_CACHE
mcr p15, 1, r0, c15, c2, 0
/* Auxiliary Debug Modes Control 0 Register */
mrc p15, 1, r0, c15, c1, 0
orr r0, r0, #PJ4B_WFI_WFE
mcr p15, 1, r0, c15, c1, 0
#endif /* CONFIG_CPU_PJ4B */
__v7_setup:
adr r12, __v7_setup_stack @ the local stack
stmia r12, {r0-r5, r7, r9, r11, lr}
bl v7_flush_dcache_louis
ldmia r12, {r0-r5, r7, r9, r11, lr}
mrc p15, 0, r0, c0, c0, 0 @ read main ID register
and r10, r0, #0xff000000 @ ARM?
teq r10, #0x41000000
bne 3f
and r5, r0, #0x00f00000 @ variant
and r6, r0, #0x0000000f @ revision
orr r6, r6, r5, lsr #20-4 @ combine variant and revision
ubfx r0, r0, #4, #12 @ primary part number
/* Cortex-A8 Errata */
ldr r10, =0x00000c08 @ Cortex-A8 primary part number
teq r0, r10
bne 2f
#if defined(CONFIG_ARM_ERRATA_430973) && !defined(CONFIG_ARCH_MULTIPLATFORM)
teq r5, #0x00100000 @ only present in r1p*
mrceq p15, 0, r10, c1, c0, 1 @ read aux control register
orreq r10, r10, #(1 << 6) @ set IBE to 1
mcreq p15, 0, r10, c1, c0, 1 @ write aux control register
#endif
#ifdef CONFIG_ARM_ERRATA_458693
teq r6, #0x20 @ only present in r2p0
mrceq p15, 0, r10, c1, c0, 1 @ read aux control register
orreq r10, r10, #(1 << 5) @ set L1NEON to 1
orreq r10, r10, #(1 << 9) @ set PLDNOP to 1
mcreq p15, 0, r10, c1, c0, 1 @ write aux control register
#endif
#ifdef CONFIG_ARM_ERRATA_460075
teq r6, #0x20 @ only present in r2p0
mrceq p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register
tsteq r10, #1 << 22
orreq r10, r10, #(1 << 22) @ set the Write Allocate disable bit
mcreq p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register
#endif
b 3f
/* Cortex-A9 Errata */
2: ldr r10, =0x00000c09 @ Cortex-A9 primary part number
teq r0, r10
bne 3f
#ifdef CONFIG_ARM_ERRATA_742230
cmp r6, #0x22 @ only present up to r2p2
mrcle p15, 0, r10, c15, c0, 1 @ read diagnostic register
orrle r10, r10, #1 << 4 @ set bit #4
mcrle p15, 0, r10, c15, c0, 1 @ write diagnostic register
#endif
#ifdef CONFIG_ARM_ERRATA_742231
teq r6, #0x20 @ present in r2p0
teqne r6, #0x21 @ present in r2p1
teqne r6, #0x22 @ present in r2p2
mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register
orreq r10, r10, #1 << 12 @ set bit #12
orreq r10, r10, #1 << 22 @ set bit #22
mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register
#endif
#ifdef CONFIG_ARM_ERRATA_743622
teq r5, #0x00200000 @ only present in r2p*
mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register
orreq r10, r10, #1 << 6 @ set bit #6
mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register
#endif
#if defined(CONFIG_ARM_ERRATA_751472) && defined(CONFIG_SMP)
ALT_SMP(cmp r6, #0x30) @ present prior to r3p0
ALT_UP_B(1f)
mrclt p15, 0, r10, c15, c0, 1 @ read diagnostic register
orrlt r10, r10, #1 << 11 @ set bit #11
mcrlt p15, 0, r10, c15, c0, 1 @ write diagnostic register
1:
#endif
3: mov r10, #0
mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate
dsb
#ifdef CONFIG_MMU
mcr p15, 0, r10, c8, c7, 0 @ invalidate I + D TLBs
v7_ttb_setup r10, r4, r8, r5 @ TTBCR, TTBRx setup
ldr r5, =PRRR @ PRRR
ldr r6, =NMRR @ NMRR
mcr p15, 0, r5, c10, c2, 0 @ write PRRR
mcr p15, 0, r6, c10, c2, 1 @ write NMRR
#endif
#ifndef CONFIG_ARM_THUMBEE
mrc p15, 0, r0, c0, c1, 0 @ read ID_PFR0 for ThumbEE
and r0, r0, #(0xf << 12) @ ThumbEE enabled field
teq r0, #(1 << 12) @ check if ThumbEE is present
bne 1f
mov r5, #0
mcr p14, 6, r5, c1, c0, 0 @ Initialize TEEHBR to 0
mrc p14, 6, r0, c0, c0, 0 @ load TEECR
orr r0, r0, #1 @ set the 1st bit in order to
mcr p14, 6, r0, c0, c0, 0 @ stop userspace TEEHBR access
1:
#endif
adr r5, v7_crval
ldmia r5, {r5, r6}
#ifdef CONFIG_CPU_ENDIAN_BE8
orr r6, r6, #1 << 25 @ big-endian page tables
#endif
#ifdef CONFIG_SWP_EMULATE
orr r5, r5, #(1 << 10) @ set SW bit in "clear"
bic r6, r6, #(1 << 10) @ clear it in "mmuset"
#endif
mrc p15, 0, r0, c1, c0, 0 @ read control register
bic r0, r0, r5 @ clear bits them
orr r0, r0, r6 @ set them
THUMB( orr r0, r0, #1 << 30 ) @ Thumb exceptions
mov pc, lr @ return to head.S:__ret
ENDPROC(__v7_setup)
.align 2
__v7_setup_stack:
.space 4 * 11 @ 11 registers
__INITDATA
@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
define_processor_functions v7, dabort=v7_early_abort, pabort=v7_pabort, suspend=1
#ifdef CONFIG_CPU_PJ4B
define_processor_functions pj4b, dabort=v7_early_abort, pabort=v7_pabort, suspend=1
#endif
.section ".rodata"
string cpu_arch_name, "armv7"
string cpu_elf_name, "v7"
.align
.section ".proc.info.init", #alloc, #execinstr
/*
* Standard v7 proc info content
*/
.macro __v7_proc initfunc, mm_mmuflags = 0, io_mmuflags = 0, hwcaps = 0, proc_fns = v7_processor_functions
ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \
PMD_SECT_AF | PMD_FLAGS_SMP | \mm_mmuflags)
ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \
PMD_SECT_AF | PMD_FLAGS_UP | \mm_mmuflags)
.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ | PMD_SECT_AF | \io_mmuflags
W(b) \initfunc
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_FAST_MULT | \
HWCAP_EDSP | HWCAP_TLS | \hwcaps
.long cpu_v7_name
.long \proc_fns
.long v7wbi_tlb_fns
.long v6_user_fns
.long v7_cache_fns
.endm
#ifndef CONFIG_ARM_LPAE
/*
* ARM Ltd. Cortex A5 processor.
*/
.type __v7_ca5mp_proc_info, #object
__v7_ca5mp_proc_info:
.long 0x410fc050
.long 0xff0ffff0
__v7_proc __v7_ca5mp_setup
.size __v7_ca5mp_proc_info, . - __v7_ca5mp_proc_info
/*
* ARM Ltd. Cortex A9 processor.
*/
.type __v7_ca9mp_proc_info, #object
__v7_ca9mp_proc_info:
.long 0x410fc090
.long 0xff0ffff0
__v7_proc __v7_ca9mp_setup
.size __v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info
#endif /* CONFIG_ARM_LPAE */
/*
* Marvell PJ4B processor.
*/
#ifdef CONFIG_CPU_PJ4B
.type __v7_pj4b_proc_info, #object
__v7_pj4b_proc_info:
.long 0x560f5800
.long 0xff0fff00
__v7_proc __v7_pj4b_setup, proc_fns = pj4b_processor_functions
.size __v7_pj4b_proc_info, . - __v7_pj4b_proc_info
#endif
/*
* ARM Ltd. Cortex R7 processor.
*/
.type __v7_cr7mp_proc_info, #object
__v7_cr7mp_proc_info:
.long 0x410fc170
.long 0xff0ffff0
__v7_proc __v7_cr7mp_setup
.size __v7_cr7mp_proc_info, . - __v7_cr7mp_proc_info
/*
* ARM Ltd. Cortex A7 processor.
*/
.type __v7_ca7mp_proc_info, #object
__v7_ca7mp_proc_info:
.long 0x410fc070
.long 0xff0ffff0
__v7_proc __v7_ca7mp_setup
.size __v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info
/*
* ARM Ltd. Cortex A15 processor.
*/
.type __v7_ca15mp_proc_info, #object
__v7_ca15mp_proc_info:
.long 0x410fc0f0
.long 0xff0ffff0
__v7_proc __v7_ca15mp_setup
.size __v7_ca15mp_proc_info, . - __v7_ca15mp_proc_info
/*
* Qualcomm Inc. Krait processors.
*/
.type __krait_proc_info, #object
__krait_proc_info:
.long 0x510f0400 @ Required ID value
.long 0xff0ffc00 @ Mask for ID
/*
* Some Krait processors don't indicate support for SDIV and UDIV
* instructions in the ARM instruction set, even though they actually
* do support them.
*/
__v7_proc __v7_setup, hwcaps = HWCAP_IDIV
.size __krait_proc_info, . - __krait_proc_info
/*
* Match any ARMv7 processor core.
*/
.type __v7_proc_info, #object
__v7_proc_info:
.long 0x000f0000 @ Required ID value
.long 0x000f0000 @ Mask for ID
__v7_proc __v7_setup
.size __v7_proc_info, . - __v7_proc_info