linux/drivers/pci/ioapic.c
Linus Torvalds 193c0d6825 PCI changes for the v3.8 merge window:
Host bridge hotplug:
     - Untangle _PRT from struct pci_bus (Bjorn Helgaas)
     - Request _OSC control before scanning root bus (Taku Izumi)
     - Assign resources when adding host bridge (Yinghai Lu)
     - Remove root bus when removing host bridge (Yinghai Lu)
     - Remove _PRT during hot remove (Yinghai Lu)
 
   SRIOV
     - Add sysfs knobs to control numVFs (Don Dutile)
 
   Power management
     - Notify devices when power resource turned on (Huang Ying)
 
   Bug fixes
     - Work around broken _SEG on HP xw9300 (Bjorn Helgaas)
     - Keep runtime PM enabled for unbound PCI devices (Huang Ying)
     - Fix Optimus dual-GPU runtime D3 suspend issue (Dave Airlie)
     - Fix xen frontend shutdown issue (David Vrabel)
     - Work around PLX PCI 9050 BAR alignment erratum (Ian Abbott)
 
   Miscellaneous
     - Add GPL license for drivers/pci/ioapic (Andrew Cooks)
     - Add standard PCI-X, PCIe ASPM register #defines (Bjorn Helgaas)
     - NumaChip remote PCI support (Daniel Blueman)
     - Fix PCIe Link Capabilities Supported Link Speed definition (Jingoo Han)
     - Convert dev_printk() to dev_info(), etc (Joe Perches)
     - Add support for non PCI BAR ROM data (Matthew Garrett)
     - Add x86 support for host bridge translation offset (Mike Yoknis)
     - Report success only when every driver supports AER (Vijay Pandarathil)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJQyKwSAAoJEPGMOI97Hn6zScgQAJZK2VDfCv74mKrgSDNokIzH
 5nVDrc9AHKJm7CUODs6keJK5d4TD/za3Zao68zrYHsJJKes2ni2Z3W34HP2RXKK2
 eOmePXOHYPPZMlimP9r9cVxNu1ZJCyp/yWSBcsPF4zUgWhBWLRaSj85I049gQ0sz
 +05nZYfLjVd3HNiaXsG4CQyMrNF46XEsLhF9vs+Nr2GHPwrpzhfScgYv63oDS86C
 3ICKsjmiRUZcNelxIFYmyxa5u89QdW5XHjzc9eHGQuus24Vxw+TZzsdfc17sUJEE
 HTyXY+RjDpOVhdtwwUjrCEOiyZYvy3g9+3sKxoxgt/76ghdUaR7fxITwB97qVMFD
 T0ESlKjSV/Qv5QYdyy5uP4zwNs/PXCWXkTg/L1m71F30BxKWDa7tgiA6uK7Z7fl5
 1aokKBdk3mtJJJIDJG1YkxPXx/JItTGCNYrx7CcFj49rSjrUWLQdmrYahersRIsB
 3wiD2xTi9e4dXeP/+VGzGOWB/sHk+73jvrvZe/REa1FCnMINDz4+9V9WaGROMqyq
 MQ8kX0KfYcNVNxy1GOXjU5wLpMN/t/QbvI7gwzRP1DAUCJPoOgFy7AjvSTVG3zuy
 8CtdOFttVkUn5dqsbQR0gVbyQVTS3PGSKz5XC/s8kVDWhja0xZTBYwrskM/4zdSD
 Xf48OyYV5EjpC3FYUSiU
 =OE3Q
 -----END PGP SIGNATURE-----

Merge tag 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI update from Bjorn Helgaas:
 "Host bridge hotplug:
   - Untangle _PRT from struct pci_bus (Bjorn Helgaas)
   - Request _OSC control before scanning root bus (Taku Izumi)
   - Assign resources when adding host bridge (Yinghai Lu)
   - Remove root bus when removing host bridge (Yinghai Lu)
   - Remove _PRT during hot remove (Yinghai Lu)

  SRIOV
    - Add sysfs knobs to control numVFs (Don Dutile)

  Power management
   - Notify devices when power resource turned on (Huang Ying)

  Bug fixes
   - Work around broken _SEG on HP xw9300 (Bjorn Helgaas)
   - Keep runtime PM enabled for unbound PCI devices (Huang Ying)
   - Fix Optimus dual-GPU runtime D3 suspend issue (Dave Airlie)
   - Fix xen frontend shutdown issue (David Vrabel)
   - Work around PLX PCI 9050 BAR alignment erratum (Ian Abbott)

  Miscellaneous
   - Add GPL license for drivers/pci/ioapic (Andrew Cooks)
   - Add standard PCI-X, PCIe ASPM register #defines (Bjorn Helgaas)
   - NumaChip remote PCI support (Daniel Blueman)
   - Fix PCIe Link Capabilities Supported Link Speed definition (Jingoo
     Han)
   - Convert dev_printk() to dev_info(), etc (Joe Perches)
   - Add support for non PCI BAR ROM data (Matthew Garrett)
   - Add x86 support for host bridge translation offset (Mike Yoknis)
   - Report success only when every driver supports AER (Vijay
     Pandarathil)"

Fix up trivial conflicts.

* tag 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits)
  PCI: Use phys_addr_t for physical ROM address
  x86/PCI: Add NumaChip remote PCI support
  ath9k: Use standard #defines for PCIe Capability ASPM fields
  iwlwifi: Use standard #defines for PCIe Capability ASPM fields
  iwlwifi: collapse wrapper for pcie_capability_read_word()
  iwlegacy: Use standard #defines for PCIe Capability ASPM fields
  iwlegacy: collapse wrapper for pcie_capability_read_word()
  cxgb3: Use standard #defines for PCIe Capability ASPM fields
  PCI: Add standard PCIe Capability Link ASPM field names
  PCI/portdrv: Use PCI Express Capability accessors
  PCI: Use standard PCIe Capability Link register field names
  x86: Use PCI setup data
  PCI: Add support for non-BAR ROMs
  PCI: Add pcibios_add_device
  EFI: Stash ROMs if they're not in the PCI BAR
  PCI: Add and use standard PCI-X Capability register names
  PCI/PM: Keep runtime PM enabled for unbound PCI devices
  xen-pcifront: Handle backend CLOSED without CLOSING
  PCI: SRIOV control and status via sysfs (documentation)
  PCI/AER: Report success only when every device has AER-aware driver
  ...
2012-12-13 12:14:47 -08:00

130 lines
2.8 KiB
C

/*
* IOAPIC/IOxAPIC/IOSAPIC driver
*
* Copyright (C) 2009 Fujitsu Limited.
* (c) Copyright 2009 Hewlett-Packard Development Company, L.P.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* This driver manages PCI I/O APICs added by hotplug after boot. We try to
* claim all I/O APIC PCI devices, but those present at boot were registered
* when we parsed the ACPI MADT, so we'll fail when we try to re-register
* them.
*/
#include <linux/pci.h>
#include <linux/module.h>
#include <linux/acpi.h>
#include <linux/slab.h>
#include <acpi/acpi_bus.h>
struct ioapic {
acpi_handle handle;
u32 gsi_base;
};
static int ioapic_probe(struct pci_dev *dev, const struct pci_device_id *ent)
{
acpi_handle handle;
acpi_status status;
unsigned long long gsb;
struct ioapic *ioapic;
int ret;
char *type;
struct resource *res;
handle = DEVICE_ACPI_HANDLE(&dev->dev);
if (!handle)
return -EINVAL;
status = acpi_evaluate_integer(handle, "_GSB", NULL, &gsb);
if (ACPI_FAILURE(status))
return -EINVAL;
/*
* The previous code in acpiphp evaluated _MAT if _GSB failed, but
* ACPI spec 4.0 sec 6.2.2 requires _GSB for hot-pluggable I/O APICs.
*/
ioapic = kzalloc(sizeof(*ioapic), GFP_KERNEL);
if (!ioapic)
return -ENOMEM;
ioapic->handle = handle;
ioapic->gsi_base = (u32) gsb;
if (dev->class == PCI_CLASS_SYSTEM_PIC_IOAPIC)
type = "IOAPIC";
else
type = "IOxAPIC";
ret = pci_enable_device(dev);
if (ret < 0)
goto exit_free;
pci_set_master(dev);
if (pci_request_region(dev, 0, type))
goto exit_disable;
res = &dev->resource[0];
if (acpi_register_ioapic(ioapic->handle, res->start, ioapic->gsi_base))
goto exit_release;
pci_set_drvdata(dev, ioapic);
dev_info(&dev->dev, "%s at %pR, GSI %u\n", type, res, ioapic->gsi_base);
return 0;
exit_release:
pci_release_region(dev, 0);
exit_disable:
pci_disable_device(dev);
exit_free:
kfree(ioapic);
return -ENODEV;
}
static void ioapic_remove(struct pci_dev *dev)
{
struct ioapic *ioapic = pci_get_drvdata(dev);
acpi_unregister_ioapic(ioapic->handle, ioapic->gsi_base);
pci_release_region(dev, 0);
pci_disable_device(dev);
kfree(ioapic);
}
static DEFINE_PCI_DEVICE_TABLE(ioapic_devices) = {
{ PCI_DEVICE_CLASS(PCI_CLASS_SYSTEM_PIC_IOAPIC, ~0) },
{ PCI_DEVICE_CLASS(PCI_CLASS_SYSTEM_PIC_IOXAPIC, ~0) },
{ }
};
MODULE_DEVICE_TABLE(pci, ioapic_devices);
static struct pci_driver ioapic_driver = {
.name = "ioapic",
.id_table = ioapic_devices,
.probe = ioapic_probe,
.remove = ioapic_remove,
};
static int __init ioapic_init(void)
{
return pci_register_driver(&ioapic_driver);
}
static void __exit ioapic_exit(void)
{
pci_unregister_driver(&ioapic_driver);
}
module_init(ioapic_init);
module_exit(ioapic_exit);
MODULE_LICENSE("GPL");