linux/drivers/dma/ste_dma40.h
Linus Walleij 42ae6f1695 dmaengine: ste_dma40: Remove platform data
The Ux500 is device tree-only since ages. Delete the
platform data header and push it into or next to the driver
instead.

Drop the non-DT probe path since this will not happen.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230417-ux500-dma40-cleanup-v3-4-60bfa6785968@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-16 23:00:19 +05:30

111 lines
3.1 KiB
C

/* SPDX-License-Identifier: GPL-2.0-only */
#ifndef STE_DMA40_H
#define STE_DMA40_H
/*
* Maxium size for a single dma descriptor
* Size is limited to 16 bits.
* Size is in the units of addr-widths (1,2,4,8 bytes)
* Larger transfers will be split up to multiple linked desc
*/
#define STEDMA40_MAX_SEG_SIZE 0xFFFF
/* dev types for memcpy */
#define STEDMA40_DEV_DST_MEMORY (-1)
#define STEDMA40_DEV_SRC_MEMORY (-1)
enum stedma40_mode {
STEDMA40_MODE_LOGICAL = 0,
STEDMA40_MODE_PHYSICAL,
STEDMA40_MODE_OPERATION,
};
enum stedma40_mode_opt {
STEDMA40_PCHAN_BASIC_MODE = 0,
STEDMA40_LCHAN_SRC_LOG_DST_LOG = 0,
STEDMA40_PCHAN_MODULO_MODE,
STEDMA40_PCHAN_DOUBLE_DST_MODE,
STEDMA40_LCHAN_SRC_PHY_DST_LOG,
STEDMA40_LCHAN_SRC_LOG_DST_PHY,
};
#define STEDMA40_ESIZE_8_BIT 0x0
#define STEDMA40_ESIZE_16_BIT 0x1
#define STEDMA40_ESIZE_32_BIT 0x2
#define STEDMA40_ESIZE_64_BIT 0x3
/* The value 4 indicates that PEN-reg shall be set to 0 */
#define STEDMA40_PSIZE_PHY_1 0x4
#define STEDMA40_PSIZE_PHY_2 0x0
#define STEDMA40_PSIZE_PHY_4 0x1
#define STEDMA40_PSIZE_PHY_8 0x2
#define STEDMA40_PSIZE_PHY_16 0x3
/*
* The number of elements differ in logical and
* physical mode
*/
#define STEDMA40_PSIZE_LOG_1 STEDMA40_PSIZE_PHY_2
#define STEDMA40_PSIZE_LOG_4 STEDMA40_PSIZE_PHY_4
#define STEDMA40_PSIZE_LOG_8 STEDMA40_PSIZE_PHY_8
#define STEDMA40_PSIZE_LOG_16 STEDMA40_PSIZE_PHY_16
/* Maximum number of possible physical channels */
#define STEDMA40_MAX_PHYS 32
enum stedma40_flow_ctrl {
STEDMA40_NO_FLOW_CTRL,
STEDMA40_FLOW_CTRL,
};
/**
* struct stedma40_half_channel_info - dst/src channel configuration
*
* @big_endian: true if the src/dst should be read as big endian
* @data_width: Data width of the src/dst hardware
* @p_size: Burst size
* @flow_ctrl: Flow control on/off.
*/
struct stedma40_half_channel_info {
bool big_endian;
enum dma_slave_buswidth data_width;
int psize;
enum stedma40_flow_ctrl flow_ctrl;
};
/**
* struct stedma40_chan_cfg - Structure to be filled by client drivers.
*
* @dir: MEM 2 MEM, PERIPH 2 MEM , MEM 2 PERIPH, PERIPH 2 PERIPH
* @high_priority: true if high-priority
* @realtime: true if realtime mode is to be enabled. Only available on DMA40
* version 3+, i.e DB8500v2+
* @mode: channel mode: physical, logical, or operation
* @mode_opt: options for the chosen channel mode
* @dev_type: src/dst device type (driver uses dir to figure out which)
* @src_info: Parameters for dst half channel
* @dst_info: Parameters for dst half channel
* @use_fixed_channel: if true, use physical channel specified by phy_channel
* @phy_channel: physical channel to use, only if use_fixed_channel is true
*
* This structure has to be filled by the client drivers.
* It is recommended to do all dma configurations for clients in the machine.
*
*/
struct stedma40_chan_cfg {
enum dma_transfer_direction dir;
bool high_priority;
bool realtime;
enum stedma40_mode mode;
enum stedma40_mode_opt mode_opt;
int dev_type;
struct stedma40_half_channel_info src_info;
struct stedma40_half_channel_info dst_info;
bool use_fixed_channel;
int phy_channel;
};
#endif /* STE_DMA40_H */