linux/fs/xfs/xfs_dquot_item_recover.c
Darrick J. Wong 9c235dfc3d xfs: dquot recovery does not validate the recovered dquot
When we're recovering ondisk quota records from the log, we need to
validate the recovered buffer contents before writing them to disk.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
2023-11-22 23:39:36 +05:30

217 lines
5.5 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2000-2006 Silicon Graphics, Inc.
* All Rights Reserved.
*/
#include "xfs.h"
#include "xfs_fs.h"
#include "xfs_shared.h"
#include "xfs_format.h"
#include "xfs_log_format.h"
#include "xfs_trans_resv.h"
#include "xfs_mount.h"
#include "xfs_inode.h"
#include "xfs_quota.h"
#include "xfs_trans.h"
#include "xfs_buf_item.h"
#include "xfs_trans_priv.h"
#include "xfs_qm.h"
#include "xfs_log.h"
#include "xfs_log_priv.h"
#include "xfs_log_recover.h"
#include "xfs_error.h"
STATIC void
xlog_recover_dquot_ra_pass2(
struct xlog *log,
struct xlog_recover_item *item)
{
struct xfs_mount *mp = log->l_mp;
struct xfs_disk_dquot *recddq;
struct xfs_dq_logformat *dq_f;
uint type;
if (mp->m_qflags == 0)
return;
recddq = item->ri_buf[1].i_addr;
if (recddq == NULL)
return;
if (item->ri_buf[1].i_len < sizeof(struct xfs_disk_dquot))
return;
type = recddq->d_type & XFS_DQTYPE_REC_MASK;
ASSERT(type);
if (log->l_quotaoffs_flag & type)
return;
dq_f = item->ri_buf[0].i_addr;
ASSERT(dq_f);
ASSERT(dq_f->qlf_len == 1);
xlog_buf_readahead(log, dq_f->qlf_blkno,
XFS_FSB_TO_BB(mp, dq_f->qlf_len),
&xfs_dquot_buf_ra_ops);
}
/*
* Recover a dquot record
*/
STATIC int
xlog_recover_dquot_commit_pass2(
struct xlog *log,
struct list_head *buffer_list,
struct xlog_recover_item *item,
xfs_lsn_t current_lsn)
{
struct xfs_mount *mp = log->l_mp;
struct xfs_buf *bp;
struct xfs_dqblk *dqb;
struct xfs_disk_dquot *ddq, *recddq;
struct xfs_dq_logformat *dq_f;
xfs_failaddr_t fa;
int error;
uint type;
/*
* Filesystems are required to send in quota flags at mount time.
*/
if (mp->m_qflags == 0)
return 0;
recddq = item->ri_buf[1].i_addr;
if (recddq == NULL) {
xfs_alert(log->l_mp, "NULL dquot in %s.", __func__);
return -EFSCORRUPTED;
}
if (item->ri_buf[1].i_len < sizeof(struct xfs_disk_dquot)) {
xfs_alert(log->l_mp, "dquot too small (%d) in %s.",
item->ri_buf[1].i_len, __func__);
return -EFSCORRUPTED;
}
/*
* This type of quotas was turned off, so ignore this record.
*/
type = recddq->d_type & XFS_DQTYPE_REC_MASK;
ASSERT(type);
if (log->l_quotaoffs_flag & type)
return 0;
/*
* At this point we know that quota was _not_ turned off.
* Since the mount flags are not indicating to us otherwise, this
* must mean that quota is on, and the dquot needs to be replayed.
* Remember that we may not have fully recovered the superblock yet,
* so we can't do the usual trick of looking at the SB quota bits.
*
* The other possibility, of course, is that the quota subsystem was
* removed since the last mount - ENOSYS.
*/
dq_f = item->ri_buf[0].i_addr;
ASSERT(dq_f);
fa = xfs_dquot_verify(mp, recddq, dq_f->qlf_id);
if (fa) {
xfs_alert(mp, "corrupt dquot ID 0x%x in log at %pS",
dq_f->qlf_id, fa);
return -EFSCORRUPTED;
}
ASSERT(dq_f->qlf_len == 1);
/*
* At this point we are assuming that the dquots have been allocated
* and hence the buffer has valid dquots stamped in it. It should,
* therefore, pass verifier validation. If the dquot is bad, then the
* we'll return an error here, so we don't need to specifically check
* the dquot in the buffer after the verifier has run.
*/
error = xfs_trans_read_buf(mp, NULL, mp->m_ddev_targp, dq_f->qlf_blkno,
XFS_FSB_TO_BB(mp, dq_f->qlf_len), 0, &bp,
&xfs_dquot_buf_ops);
if (error)
return error;
ASSERT(bp);
dqb = xfs_buf_offset(bp, dq_f->qlf_boffset);
ddq = &dqb->dd_diskdq;
/*
* If the dquot has an LSN in it, recover the dquot only if it's less
* than the lsn of the transaction we are replaying.
*/
if (xfs_has_crc(mp)) {
xfs_lsn_t lsn = be64_to_cpu(dqb->dd_lsn);
if (lsn && lsn != -1 && XFS_LSN_CMP(lsn, current_lsn) >= 0) {
goto out_release;
}
}
memcpy(ddq, recddq, item->ri_buf[1].i_len);
if (xfs_has_crc(mp)) {
xfs_update_cksum((char *)dqb, sizeof(struct xfs_dqblk),
XFS_DQUOT_CRC_OFF);
}
/* Validate the recovered dquot. */
fa = xfs_dqblk_verify(log->l_mp, dqb, dq_f->qlf_id);
if (fa) {
XFS_CORRUPTION_ERROR("Bad dquot after recovery",
XFS_ERRLEVEL_LOW, mp, dqb,
sizeof(struct xfs_dqblk));
xfs_alert(mp,
"Metadata corruption detected at %pS, dquot 0x%x",
fa, dq_f->qlf_id);
error = -EFSCORRUPTED;
goto out_release;
}
ASSERT(dq_f->qlf_size == 2);
ASSERT(bp->b_mount == mp);
bp->b_flags |= _XBF_LOGRECOVERY;
xfs_buf_delwri_queue(bp, buffer_list);
out_release:
xfs_buf_relse(bp);
return 0;
}
const struct xlog_recover_item_ops xlog_dquot_item_ops = {
.item_type = XFS_LI_DQUOT,
.ra_pass2 = xlog_recover_dquot_ra_pass2,
.commit_pass2 = xlog_recover_dquot_commit_pass2,
};
/*
* Recover QUOTAOFF records. We simply make a note of it in the xlog
* structure, so that we know not to do any dquot item or dquot buffer recovery,
* of that type.
*/
STATIC int
xlog_recover_quotaoff_commit_pass1(
struct xlog *log,
struct xlog_recover_item *item)
{
struct xfs_qoff_logformat *qoff_f = item->ri_buf[0].i_addr;
ASSERT(qoff_f);
/*
* The logitem format's flag tells us if this was user quotaoff,
* group/project quotaoff or both.
*/
if (qoff_f->qf_flags & XFS_UQUOTA_ACCT)
log->l_quotaoffs_flag |= XFS_DQTYPE_USER;
if (qoff_f->qf_flags & XFS_PQUOTA_ACCT)
log->l_quotaoffs_flag |= XFS_DQTYPE_PROJ;
if (qoff_f->qf_flags & XFS_GQUOTA_ACCT)
log->l_quotaoffs_flag |= XFS_DQTYPE_GROUP;
return 0;
}
const struct xlog_recover_item_ops xlog_quotaoff_item_ops = {
.item_type = XFS_LI_QUOTAOFF,
.commit_pass1 = xlog_recover_quotaoff_commit_pass1,
/* nothing to commit in pass2 */
};