linux/arch/arm/mm/proc-fa526.S
Kirill A. Shutemov 4fb2847437 ARM: 5727/1: Pass IFSR register to do_PrefetchAbort()
Instruction fault status register, IFSR, was introduced on ARMv6 to
provide status information about the last insturction fault. It
needed for proper prefetch abort handling.

Now we have three prefetch abort model:

  * legacy - for CPUs before ARMv6. They doesn't provide neither
    IFSR nor IFAR. We simulate IFSR with section translation fault
    status for them to generalize code;
  * ARMv6 - provides IFSR, but not IFAR;
  * ARMv7 - provides both IFSR and IFAR.

Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-02 22:34:32 +01:00

249 lines
5.8 KiB
ArmAsm

/*
* linux/arch/arm/mm/proc-fa526.S: MMU functions for FA526
*
* Written by : Luke Lee
* Copyright (C) 2005 Faraday Corp.
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*
* These are the low level assembler for performing cache and TLB
* functions on the fa526.
*/
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/hwcap.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include <asm/system.h>
#include "proc-macros.S"
#define CACHE_DLINESIZE 16
.text
/*
* cpu_fa526_proc_init()
*/
ENTRY(cpu_fa526_proc_init)
mov pc, lr
/*
* cpu_fa526_proc_fin()
*/
ENTRY(cpu_fa526_proc_fin)
stmfd sp!, {lr}
mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
msr cpsr_c, ip
bl fa_flush_kern_cache_all
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
bic r0, r0, #0x1000 @ ...i............
bic r0, r0, #0x000e @ ............wca.
mcr p15, 0, r0, c1, c0, 0 @ disable caches
nop
nop
ldmfd sp!, {pc}
/*
* cpu_fa526_reset(loc)
*
* Perform a soft reset of the system. Put the CPU into the
* same state as it would be if it had been reset, and branch
* to what would be the reset vector.
*
* loc: location to jump to for soft reset
*/
.align 4
ENTRY(cpu_fa526_reset)
/* TODO: Use CP8 if possible... */
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
#ifdef CONFIG_MMU
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
#endif
mrc p15, 0, ip, c1, c0, 0 @ ctrl register
bic ip, ip, #0x000f @ ............wcam
bic ip, ip, #0x1100 @ ...i...s........
bic ip, ip, #0x0800 @ BTB off
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
nop
nop
mov pc, r0
/*
* cpu_fa526_do_idle()
*/
.align 4
ENTRY(cpu_fa526_do_idle)
mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
mov pc, lr
ENTRY(cpu_fa526_dcache_clean_area)
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
subs r1, r1, #CACHE_DLINESIZE
bhi 1b
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
/* =============================== PageTable ============================== */
/*
* cpu_fa526_switch_mm(pgd)
*
* Set the translation base pointer to be as described by pgd.
*
* pgd: new page tables
*/
.align 4
ENTRY(cpu_fa526_switch_mm)
#ifdef CONFIG_MMU
mov ip, #0
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
#else
mcr p15, 0, ip, c7, c14, 0 @ clean and invalidate whole D cache
#endif
mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
mcr p15, 0, ip, c7, c5, 6 @ invalidate BTB since mm changed
mcr p15, 0, ip, c7, c10, 4 @ data write barrier
mcr p15, 0, ip, c7, c5, 4 @ prefetch flush
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
mcr p15, 0, ip, c8, c7, 0 @ invalidate UTLB
#endif
mov pc, lr
/*
* cpu_fa526_set_pte_ext(ptep, pte, ext)
*
* Set a PTE and flush it out
*/
.align 4
ENTRY(cpu_fa526_set_pte_ext)
#ifdef CONFIG_MMU
armv3_set_pte_ext
mov r0, r0
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
mov r0, #0
mcr p15, 0, r0, c7, c10, 4 @ drain WB
#endif
mov pc, lr
__INIT
.type __fa526_setup, #function
__fa526_setup:
/* On return of this routine, r0 must carry correct flags for CFG register */
mov r0, #0
mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
#endif
mcr p15, 0, r0, c7, c5, 5 @ invalidate IScratchpad RAM
mov r0, #1
mcr p15, 0, r0, c1, c1, 0 @ turn-on ECR
mov r0, #0
mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB All
mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mcr p15, 0, r0, c7, c5, 4 @ prefetch flush
mov r0, #0x1f @ Domains 0, 1 = manager, 2 = client
mcr p15, 0, r0, c3, c0 @ load domain access register
mrc p15, 0, r0, c1, c0 @ get control register v4
ldr r5, fa526_cr1_clear
bic r0, r0, r5
ldr r5, fa526_cr1_set
orr r0, r0, r5
mov pc, lr
.size __fa526_setup, . - __fa526_setup
/*
* .RVI ZFRS BLDP WCAM
* ..11 1001 .111 1101
*
*/
.type fa526_cr1_clear, #object
.type fa526_cr1_set, #object
fa526_cr1_clear:
.word 0x3f3f
fa526_cr1_set:
.word 0x397D
__INITDATA
/*
* Purpose : Function pointers used to access above functions - all calls
* come through these
*/
.type fa526_processor_functions, #object
fa526_processor_functions:
.word v4_early_abort
.word legacy_pabort
.word cpu_fa526_proc_init
.word cpu_fa526_proc_fin
.word cpu_fa526_reset
.word cpu_fa526_do_idle
.word cpu_fa526_dcache_clean_area
.word cpu_fa526_switch_mm
.word cpu_fa526_set_pte_ext
.size fa526_processor_functions, . - fa526_processor_functions
.section ".rodata"
.type cpu_arch_name, #object
cpu_arch_name:
.asciz "armv4"
.size cpu_arch_name, . - cpu_arch_name
.type cpu_elf_name, #object
cpu_elf_name:
.asciz "v4"
.size cpu_elf_name, . - cpu_elf_name
.type cpu_fa526_name, #object
cpu_fa526_name:
.asciz "FA526"
.size cpu_fa526_name, . - cpu_fa526_name
.align
.section ".proc.info.init", #alloc, #execinstr
.type __fa526_proc_info,#object
__fa526_proc_info:
.long 0x66015261
.long 0xff01fff1
.long PMD_TYPE_SECT | \
PMD_SECT_BUFFERABLE | \
PMD_SECT_CACHEABLE | \
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
.long PMD_TYPE_SECT | \
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
b __fa526_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP | HWCAP_HALF
.long cpu_fa526_name
.long fa526_processor_functions
.long fa_tlb_fns
.long fa_user_fns
.long fa_cache_fns
.size __fa526_proc_info, . - __fa526_proc_info