linux/drivers/input/mouse/rpcmouse.c
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

108 lines
2.6 KiB
C

/*
* Acorn RiscPC mouse driver for Linux/ARM
*
* Copyright (c) 2000-2002 Vojtech Pavlik
* Copyright (C) 1996-2002 Russell King
*
*/
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This handles the Acorn RiscPCs mouse. We basically have a couple of
* hardware registers that track the sensor count for the X-Y movement and
* another register holding the button state. On every VSYNC interrupt we read
* the complete state and then work out if something has changed.
*/
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/ptrace.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/input.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/hardware/iomd.h>
MODULE_AUTHOR("Vojtech Pavlik, Russell King");
MODULE_DESCRIPTION("Acorn RiscPC mouse driver");
MODULE_LICENSE("GPL");
static short rpcmouse_lastx, rpcmouse_lasty;
static struct input_dev rpcmouse_dev = {
.evbit = { BIT(EV_KEY) | BIT(EV_REL) },
.keybit = { [LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT) },
.relbit = { BIT(REL_X) | BIT(REL_Y) },
.name = "Acorn RiscPC Mouse",
.phys = "rpcmouse/input0",
.id = {
.bustype = BUS_HOST,
.vendor = 0x0005,
.product = 0x0001,
.version = 0x0100,
},
};
static irqreturn_t rpcmouse_irq(int irq, void *dev_id, struct pt_regs *regs)
{
struct input_dev *dev = dev_id;
short x, y, dx, dy, b;
x = (short) iomd_readl(IOMD_MOUSEX);
y = (short) iomd_readl(IOMD_MOUSEY);
b = (short) (__raw_readl(0xe0310000) ^ 0x70);
dx = x - rpcmouse_lastx;
dy = y - rpcmouse_lasty;
rpcmouse_lastx = x;
rpcmouse_lasty = y;
input_regs(dev, regs);
input_report_rel(dev, REL_X, dx);
input_report_rel(dev, REL_Y, -dy);
input_report_key(dev, BTN_LEFT, b & 0x40);
input_report_key(dev, BTN_MIDDLE, b & 0x20);
input_report_key(dev, BTN_RIGHT, b & 0x10);
input_sync(dev);
return IRQ_HANDLED;
}
static int __init rpcmouse_init(void)
{
init_input_dev(&rpcmouse_dev);
rpcmouse_lastx = (short) iomd_readl(IOMD_MOUSEX);
rpcmouse_lasty = (short) iomd_readl(IOMD_MOUSEY);
if (request_irq(IRQ_VSYNCPULSE, rpcmouse_irq, SA_SHIRQ, "rpcmouse", &rpcmouse_dev)) {
printk(KERN_ERR "rpcmouse: unable to allocate VSYNC interrupt\n");
return -1;
}
input_register_device(&rpcmouse_dev);
printk(KERN_INFO "input: Acorn RiscPC mouse\n");
return 0;
}
static void __exit rpcmouse_exit(void)
{
input_unregister_device(&rpcmouse_dev);
free_irq(IRQ_VSYNCPULSE, &rpcmouse_dev);
}
module_init(rpcmouse_init);
module_exit(rpcmouse_exit);