linux/arch/x86/include/asm/visws/cobalt.h
H. Peter Anvin 05e4d3169b x86: drop double underscores from header guards
Drop double underscores from header guards in arch/x86/include.  They
are used inconsistently, and are not necessary.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-10-23 00:01:39 -07:00

126 lines
3.5 KiB
C

#ifndef _ASM_X86_VISWS_COBALT_H
#define _ASM_X86_VISWS_COBALT_H
#include <asm/fixmap.h>
/*
* Cobalt SGI Visual Workstation system ASIC
*/
#define CO_CPU_NUM_PHYS 0x1e00
#define CO_CPU_TAB_PHYS (CO_CPU_NUM_PHYS + 2)
#define CO_CPU_MAX 4
#define CO_CPU_PHYS 0xc2000000
#define CO_APIC_PHYS 0xc4000000
/* see set_fixmap() and asm/fixmap.h */
#define CO_CPU_VADDR (fix_to_virt(FIX_CO_CPU))
#define CO_APIC_VADDR (fix_to_virt(FIX_CO_APIC))
/* Cobalt CPU registers -- relative to CO_CPU_VADDR, use co_cpu_*() */
#define CO_CPU_REV 0x08
#define CO_CPU_CTRL 0x10
#define CO_CPU_STAT 0x20
#define CO_CPU_TIMEVAL 0x30
/* CO_CPU_CTRL bits */
#define CO_CTRL_TIMERUN 0x04 /* 0 == disabled */
#define CO_CTRL_TIMEMASK 0x08 /* 0 == unmasked */
/* CO_CPU_STATUS bits */
#define CO_STAT_TIMEINTR 0x02 /* (r) 1 == int pend, (w) 0 == clear */
/* CO_CPU_TIMEVAL value */
#define CO_TIME_HZ 100000000 /* Cobalt core rate */
/* Cobalt APIC registers -- relative to CO_APIC_VADDR, use co_apic_*() */
#define CO_APIC_HI(n) (((n) * 0x10) + 4)
#define CO_APIC_LO(n) ((n) * 0x10)
#define CO_APIC_ID 0x0ffc
/* CO_APIC_ID bits */
#define CO_APIC_ENABLE 0x00000100
/* CO_APIC_LO bits */
#define CO_APIC_MASK 0x00010000 /* 0 = enabled */
#define CO_APIC_LEVEL 0x00008000 /* 0 = edge */
/*
* Where things are physically wired to Cobalt
* #defines with no board _<type>_<rev>_ are common to all (thus far)
*/
#define CO_APIC_IDE0 4
#define CO_APIC_IDE1 2 /* Only on 320 */
#define CO_APIC_8259 12 /* serial, floppy, par-l-l */
/* Lithium PCI Bridge A -- "the one with 82557 Ethernet" */
#define CO_APIC_PCIA_BASE0 0 /* and 1 */ /* slot 0, line 0 */
#define CO_APIC_PCIA_BASE123 5 /* and 6 */ /* slot 0, line 1 */
#define CO_APIC_PIIX4_USB 7 /* this one is weird */
/* Lithium PCI Bridge B -- "the one with PIIX4" */
#define CO_APIC_PCIB_BASE0 8 /* and 9-12 *//* slot 0, line 0 */
#define CO_APIC_PCIB_BASE123 13 /* 14.15 */ /* slot 0, line 1 */
#define CO_APIC_VIDOUT0 16
#define CO_APIC_VIDOUT1 17
#define CO_APIC_VIDIN0 18
#define CO_APIC_VIDIN1 19
#define CO_APIC_LI_AUDIO 22
#define CO_APIC_AS 24
#define CO_APIC_RE 25
#define CO_APIC_CPU 28 /* Timer and Cache interrupt */
#define CO_APIC_NMI 29
#define CO_APIC_LAST CO_APIC_NMI
/*
* This is how irqs are assigned on the Visual Workstation.
* Legacy devices get irq's 1-15 (system clock is 0 and is CO_APIC_CPU).
* All other devices (including PCI) go to Cobalt and are irq's 16 on up.
*/
#define CO_IRQ_APIC0 16 /* irq of apic entry 0 */
#define IS_CO_APIC(irq) ((irq) >= CO_IRQ_APIC0)
#define CO_IRQ(apic) (CO_IRQ_APIC0 + (apic)) /* apic ent to irq */
#define CO_APIC(irq) ((irq) - CO_IRQ_APIC0) /* irq to apic ent */
#define CO_IRQ_IDE0 14 /* knowledge of... */
#define CO_IRQ_IDE1 15 /* ... ide driver defaults! */
#define CO_IRQ_8259 CO_IRQ(CO_APIC_8259)
#ifdef CONFIG_X86_VISWS_APIC
static inline void co_cpu_write(unsigned long reg, unsigned long v)
{
*((volatile unsigned long *)(CO_CPU_VADDR+reg))=v;
}
static inline unsigned long co_cpu_read(unsigned long reg)
{
return *((volatile unsigned long *)(CO_CPU_VADDR+reg));
}
static inline void co_apic_write(unsigned long reg, unsigned long v)
{
*((volatile unsigned long *)(CO_APIC_VADDR+reg))=v;
}
static inline unsigned long co_apic_read(unsigned long reg)
{
return *((volatile unsigned long *)(CO_APIC_VADDR+reg));
}
#endif
extern char visws_board_type;
#define VISWS_320 0
#define VISWS_540 1
extern char visws_board_rev;
#endif /* _ASM_X86_VISWS_COBALT_H */