linux/drivers/scsi/lpfc/lpfc_bsg.h
James Smart c749593703 [SCSI] lpfc 8.3.12: BSG Fixes and enhancements
- Add memcpy to mailbox completion to transfer reply correctly.
- Add support for BSG mailbox commands (dump, update_cfg, and
   event_log_status).
- Add warning message and refuse mailbox command while mgmt is blocked.
- Add checks for memory allocation failure.
- Add check for sli4 dump zero BDE size.
- Only copy data if mailbox commands succeed.
- Add support for Read Event Log mailbox command.

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11 13:45:38 -05:00

112 lines
3.1 KiB
C

/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
* Copyright (C) 2010 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
* This program is free software; you can redistribute it and/or *
* modify it under the terms of version 2 of the GNU General *
* Public License as published by the Free Software Foundation. *
* This program is distributed in the hope that it will be useful. *
* ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
* WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
* FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
* DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
* TO BE LEGALLY INVALID. See the GNU General Public License for *
* more details, a copy of which can be found in the file COPYING *
* included with this package. *
*******************************************************************/
/* bsg definitions
* No pointers to user data are allowed, all application buffers and sizes will
* derived through the bsg interface.
*
* These are the vendor unique structures passed in using the bsg
* FC_BSG_HST_VENDOR message code type.
*/
#define LPFC_BSG_VENDOR_SET_CT_EVENT 1
#define LPFC_BSG_VENDOR_GET_CT_EVENT 2
#define LPFC_BSG_VENDOR_SEND_MGMT_RESP 3
#define LPFC_BSG_VENDOR_DIAG_MODE 4
#define LPFC_BSG_VENDOR_DIAG_TEST 5
#define LPFC_BSG_VENDOR_GET_MGMT_REV 6
#define LPFC_BSG_VENDOR_MBOX 7
#define LPFC_BSG_VENDOR_MENLO_CMD 8
#define LPFC_BSG_VENDOR_MENLO_DATA 9
struct set_ct_event {
uint32_t command;
uint32_t type_mask;
uint32_t ev_req_id;
uint32_t ev_reg_id;
};
struct get_ct_event {
uint32_t command;
uint32_t ev_reg_id;
uint32_t ev_req_id;
};
struct get_ct_event_reply {
uint32_t immed_data;
uint32_t type;
};
struct send_mgmt_resp {
uint32_t command;
uint32_t tag;
};
#define INTERNAL_LOOP_BACK 0x1 /* adapter short cuts the loop internally */
#define EXTERNAL_LOOP_BACK 0x2 /* requires an external loopback plug */
struct diag_mode_set {
uint32_t command;
uint32_t type;
uint32_t timeout;
};
struct diag_mode_test {
uint32_t command;
};
#define LPFC_WWNN_TYPE 0
#define LPFC_WWPN_TYPE 1
struct get_mgmt_rev {
uint32_t command;
};
#define MANAGEMENT_MAJOR_REV 1
#define MANAGEMENT_MINOR_REV 0
/* the MgmtRevInfo structure */
struct MgmtRevInfo {
uint32_t a_Major;
uint32_t a_Minor;
};
struct get_mgmt_rev_reply {
struct MgmtRevInfo info;
};
#define BSG_MBOX_SIZE 4096 /* mailbox command plus extended data */
struct dfc_mbox_req {
uint32_t command;
uint32_t mbOffset;
uint32_t inExtWLen;
uint32_t outExtWLen;
};
/* Used for menlo command or menlo data. The xri is only used for menlo data */
struct menlo_command {
uint32_t cmd;
uint32_t xri;
};
struct menlo_response {
uint32_t xri; /* return the xri of the iocb exchange */
};