linux/arch/m68k/amiga/config.c
Linus Torvalds 7a932e5702 asm-generic: cross-architecture timer cleanup
This cleans up two ancient timer features that were never completed in
 the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET.
 
 There was only one user left for the ARCH_USES_GETTIMEOFFSET variant
 of clocksource implementations, the ARM EBSA110 platform. Rather than
 changing to use modern timekeeping, we remove the platform entirely as
 Russell no longer uses his machine and nobody else seems to have one
 any more.
 
 The conditional code for using arch_gettimeoffset() is removed as
 a result.
 
 For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms
 not using clockevent drivers: parisc, ia64, most of m68k, and one
 Arm platform. These all do timer ticks slighly differently, and this
 gets cleaned up to the point they at least all call the same helper
 function. Instead of most platforms using 'select GENERIC_CLOCKEVENTS'
 in Kconfig, the polarity is now reversed, with the few remaining ones
 selecting LEGACY_TIMER_TICK instead.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl/Y1v8ACgkQmmx57+YA
 GNmCvQ/9EDlgCt92r8SB+LGafDtgB8TUQZeIrs9S2mByzdxwnw0lxObIXFCnhQgh
 RpG3dR+ONRDnC5eI149B377JOEFMZWe2+BtYHUHkFARtUEWatslQcz7yAGvVRK/l
 TS/qReb6piKltlzuanF1bMZbjy2OhlaDRcm+OlC3y5mALR33M4emb+rJ6cSdfk3K
 v1iZhrxtfQT77ztesh/oPkPiyQ6kNcz7SfpyYOb6f5VLlml2BZ7YwBSVyGY7urHk
 RL3XqOUP4KKlMEAI8w0E2nvft6Fk+luziBhrMYWK0GvbmI1OESENuX/c6tgT2OQ1
 DRaVHvcPG/EAY8adOKxxVyHhEJDSoz5GJV/EtjlOegsJk6RomczR1uuiT3Kvm7Ah
 PktMKv4xQht1E15KPSKbOvNIEP18w2s5z6gw+jVDv8pw42pVEQManm1D+BICqrhl
 fcpw6T1drf9UxAjwX4+zXtmNs+a+mqiFG8puU4VVgT4GpQ8umHvunXz2WUjZO0jc
 3m8ErJHBvtJwW5TOHGyXnjl9SkwPzHOfF6IcXTYWEDU4/gQIK9TwUvCjLc0lE27t
 FMCV2ds7/K1CXwRgpa5IrefSkb8yOXSbRZ56NqqF7Ekxw4J5bYRSaY7jb+qD/e+3
 5O1y+iPxFrpH+16hSahvzrtcdFNbLQvBBuRtEQOYuHLt2UJrNoU=
 =QpNs
 -----END PGP SIGNATURE-----

Merge tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann:
 "This cleans up two ancient timer features that were never completed in
  the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET.

  There was only one user left for the ARCH_USES_GETTIMEOFFSET variant
  of clocksource implementations, the ARM EBSA110 platform. Rather than
  changing to use modern timekeeping, we remove the platform entirely as
  Russell no longer uses his machine and nobody else seems to have one
  any more.

  The conditional code for using arch_gettimeoffset() is removed as a
  result.

  For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms
  not using clockevent drivers: parisc, ia64, most of m68k, and one Arm
  platform. These all do timer ticks slighly differently, and this gets
  cleaned up to the point they at least all call the same helper
  function.

  Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in
  Kconfig, the polarity is now reversed, with the few remaining ones
  selecting LEGACY_TIMER_TICK instead"

* tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  timekeeping: default GENERIC_CLOCKEVENTS to enabled
  timekeeping: remove xtime_update
  m68k: remove timer_interrupt() function
  m68k: change remaining timers to legacy_timer_tick
  m68k: m68328: use legacy_timer_tick()
  m68k: sun3/sun3c: use legacy_timer_tick
  m68k: split heartbeat out of timer function
  m68k: coldfire: use legacy_timer_tick()
  parisc: use legacy_timer_tick
  ARM: rpc: use legacy_timer_tick
  ia64: convert to legacy_timer_tick
  timekeeping: add CONFIG_LEGACY_TIMER_TICK
  timekeeping: remove arch_gettimeoffset
  net: remove am79c961a driver
  ARM: remove ebsa110 platform
2020-12-16 00:07:17 -08:00

851 lines
20 KiB
C

/*
* linux/arch/m68k/amiga/config.c
*
* Copyright (C) 1993 Hamish Macdonald
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
*/
/*
* Miscellaneous Amiga stuff
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/seq_file.h>
#include <linux/tty.h>
#include <linux/clocksource.h>
#include <linux/console.h>
#include <linux/rtc.h>
#include <linux/init.h>
#include <linux/vt_kern.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/zorro.h>
#include <linux/module.h>
#include <linux/keyboard.h>
#include <asm/bootinfo.h>
#include <asm/bootinfo-amiga.h>
#include <asm/byteorder.h>
#include <asm/setup.h>
#include <asm/amigahw.h>
#include <asm/amigaints.h>
#include <asm/irq.h>
#include <asm/machdep.h>
#include <asm/io.h>
static unsigned long amiga_model;
unsigned long amiga_eclock;
EXPORT_SYMBOL(amiga_eclock);
unsigned long amiga_colorclock;
EXPORT_SYMBOL(amiga_colorclock);
unsigned long amiga_chipset;
EXPORT_SYMBOL(amiga_chipset);
unsigned char amiga_vblank;
EXPORT_SYMBOL(amiga_vblank);
static unsigned char amiga_psfreq;
struct amiga_hw_present amiga_hw_present;
EXPORT_SYMBOL(amiga_hw_present);
static char s_a500[] __initdata = "A500";
static char s_a500p[] __initdata = "A500+";
static char s_a600[] __initdata = "A600";
static char s_a1000[] __initdata = "A1000";
static char s_a1200[] __initdata = "A1200";
static char s_a2000[] __initdata = "A2000";
static char s_a2500[] __initdata = "A2500";
static char s_a3000[] __initdata = "A3000";
static char s_a3000t[] __initdata = "A3000T";
static char s_a3000p[] __initdata = "A3000+";
static char s_a4000[] __initdata = "A4000";
static char s_a4000t[] __initdata = "A4000T";
static char s_cdtv[] __initdata = "CDTV";
static char s_cd32[] __initdata = "CD32";
static char s_draco[] __initdata = "Draco";
static char *amiga_models[] __initdata = {
[AMI_500-AMI_500] = s_a500,
[AMI_500PLUS-AMI_500] = s_a500p,
[AMI_600-AMI_500] = s_a600,
[AMI_1000-AMI_500] = s_a1000,
[AMI_1200-AMI_500] = s_a1200,
[AMI_2000-AMI_500] = s_a2000,
[AMI_2500-AMI_500] = s_a2500,
[AMI_3000-AMI_500] = s_a3000,
[AMI_3000T-AMI_500] = s_a3000t,
[AMI_3000PLUS-AMI_500] = s_a3000p,
[AMI_4000-AMI_500] = s_a4000,
[AMI_4000T-AMI_500] = s_a4000t,
[AMI_CDTV-AMI_500] = s_cdtv,
[AMI_CD32-AMI_500] = s_cd32,
[AMI_DRACO-AMI_500] = s_draco,
};
static char amiga_model_name[13] = "Amiga ";
static void amiga_sched_init(void);
static void amiga_get_model(char *model);
static void amiga_get_hardware_list(struct seq_file *m);
extern void amiga_mksound(unsigned int count, unsigned int ticks);
static void amiga_reset(void);
extern void amiga_init_sound(void);
static void amiga_mem_console_write(struct console *co, const char *b,
unsigned int count);
#ifdef CONFIG_HEARTBEAT
static void amiga_heartbeat(int on);
#endif
static struct console amiga_console_driver = {
.name = "debug",
.flags = CON_PRINTBUFFER,
.index = -1,
};
/*
* Motherboard Resources present in all Amiga models
*/
static struct {
struct resource _ciab, _ciaa, _custom, _kickstart;
} mb_resources = {
._ciab = {
.name = "CIA B", .start = 0x00bfd000, .end = 0x00bfdfff
},
._ciaa = {
.name = "CIA A", .start = 0x00bfe000, .end = 0x00bfefff
},
._custom = {
.name = "Custom I/O", .start = 0x00dff000, .end = 0x00dfffff
},
._kickstart = {
.name = "Kickstart ROM", .start = 0x00f80000, .end = 0x00ffffff
}
};
static struct resource ram_resource[NUM_MEMINFO];
/*
* Parse an Amiga-specific record in the bootinfo
*/
int __init amiga_parse_bootinfo(const struct bi_record *record)
{
int unknown = 0;
const void *data = record->data;
switch (be16_to_cpu(record->tag)) {
case BI_AMIGA_MODEL:
amiga_model = be32_to_cpup(data);
break;
case BI_AMIGA_ECLOCK:
amiga_eclock = be32_to_cpup(data);
break;
case BI_AMIGA_CHIPSET:
amiga_chipset = be32_to_cpup(data);
break;
case BI_AMIGA_CHIP_SIZE:
amiga_chip_size = be32_to_cpup(data);
break;
case BI_AMIGA_VBLANK:
amiga_vblank = *(const __u8 *)data;
break;
case BI_AMIGA_PSFREQ:
amiga_psfreq = *(const __u8 *)data;
break;
case BI_AMIGA_AUTOCON:
#ifdef CONFIG_ZORRO
if (zorro_num_autocon < ZORRO_NUM_AUTO) {
const struct ConfigDev *cd = data;
struct zorro_dev_init *dev = &zorro_autocon_init[zorro_num_autocon++];
dev->rom = cd->cd_Rom;
dev->slotaddr = be16_to_cpu(cd->cd_SlotAddr);
dev->slotsize = be16_to_cpu(cd->cd_SlotSize);
dev->boardaddr = be32_to_cpu(cd->cd_BoardAddr);
dev->boardsize = be32_to_cpu(cd->cd_BoardSize);
} else
pr_warn("amiga_parse_bootinfo: too many AutoConfig devices\n");
#endif /* CONFIG_ZORRO */
break;
case BI_AMIGA_SERPER:
/* serial port period: ignored here */
break;
default:
unknown = 1;
}
return unknown;
}
/*
* Identify builtin hardware
*/
static void __init amiga_identify(void)
{
/* Fill in some default values, if necessary */
if (amiga_eclock == 0)
amiga_eclock = 709379;
memset(&amiga_hw_present, 0, sizeof(amiga_hw_present));
pr_info("Amiga hardware found: ");
if (amiga_model >= AMI_500 && amiga_model <= AMI_DRACO) {
pr_cont("[%s] ", amiga_models[amiga_model-AMI_500]);
strcat(amiga_model_name, amiga_models[amiga_model-AMI_500]);
}
switch (amiga_model) {
case AMI_UNKNOWN:
break;
case AMI_600:
case AMI_1200:
AMIGAHW_SET(A1200_IDE);
AMIGAHW_SET(PCMCIA);
fallthrough;
case AMI_500:
case AMI_500PLUS:
case AMI_1000:
case AMI_2000:
case AMI_2500:
AMIGAHW_SET(A2000_CLK); /* Is this correct for all models? */
break;
case AMI_3000:
case AMI_3000T:
AMIGAHW_SET(AMBER_FF);
AMIGAHW_SET(MAGIC_REKICK);
fallthrough;
case AMI_3000PLUS:
AMIGAHW_SET(A3000_SCSI);
AMIGAHW_SET(A3000_CLK);
AMIGAHW_SET(ZORRO3);
break;
case AMI_4000T:
AMIGAHW_SET(A4000_SCSI);
fallthrough;
case AMI_4000:
AMIGAHW_SET(A4000_IDE);
AMIGAHW_SET(A3000_CLK);
AMIGAHW_SET(ZORRO3);
break;
case AMI_CDTV:
case AMI_CD32:
AMIGAHW_SET(CD_ROM);
AMIGAHW_SET(A2000_CLK); /* Is this correct? */
break;
case AMI_DRACO:
panic("No support for Draco yet");
default:
panic("Unknown Amiga Model");
}
AMIGAHW_SET(AMI_VIDEO);
AMIGAHW_SET(AMI_BLITTER);
AMIGAHW_SET(AMI_AUDIO);
AMIGAHW_SET(AMI_FLOPPY);
AMIGAHW_SET(AMI_KEYBOARD);
AMIGAHW_SET(AMI_MOUSE);
AMIGAHW_SET(AMI_SERIAL);
AMIGAHW_SET(AMI_PARALLEL);
AMIGAHW_SET(CHIP_RAM);
AMIGAHW_SET(PAULA);
switch (amiga_chipset) {
case CS_OCS:
case CS_ECS:
case CS_AGA:
switch (amiga_custom.deniseid & 0xf) {
case 0x0c:
AMIGAHW_SET(DENISE_HR);
break;
case 0x08:
AMIGAHW_SET(LISA);
break;
default:
AMIGAHW_SET(DENISE);
break;
}
break;
}
switch ((amiga_custom.vposr>>8) & 0x7f) {
case 0x00:
AMIGAHW_SET(AGNUS_PAL);
break;
case 0x10:
AMIGAHW_SET(AGNUS_NTSC);
break;
case 0x20:
case 0x21:
AMIGAHW_SET(AGNUS_HR_PAL);
break;
case 0x30:
case 0x31:
AMIGAHW_SET(AGNUS_HR_NTSC);
break;
case 0x22:
case 0x23:
AMIGAHW_SET(ALICE_PAL);
break;
case 0x32:
case 0x33:
AMIGAHW_SET(ALICE_NTSC);
break;
}
AMIGAHW_SET(ZORRO);
#define AMIGAHW_ANNOUNCE(name, str) \
if (AMIGAHW_PRESENT(name)) \
pr_cont(str)
AMIGAHW_ANNOUNCE(AMI_VIDEO, "VIDEO ");
AMIGAHW_ANNOUNCE(AMI_BLITTER, "BLITTER ");
AMIGAHW_ANNOUNCE(AMBER_FF, "AMBER_FF ");
AMIGAHW_ANNOUNCE(AMI_AUDIO, "AUDIO ");
AMIGAHW_ANNOUNCE(AMI_FLOPPY, "FLOPPY ");
AMIGAHW_ANNOUNCE(A3000_SCSI, "A3000_SCSI ");
AMIGAHW_ANNOUNCE(A4000_SCSI, "A4000_SCSI ");
AMIGAHW_ANNOUNCE(A1200_IDE, "A1200_IDE ");
AMIGAHW_ANNOUNCE(A4000_IDE, "A4000_IDE ");
AMIGAHW_ANNOUNCE(CD_ROM, "CD_ROM ");
AMIGAHW_ANNOUNCE(AMI_KEYBOARD, "KEYBOARD ");
AMIGAHW_ANNOUNCE(AMI_MOUSE, "MOUSE ");
AMIGAHW_ANNOUNCE(AMI_SERIAL, "SERIAL ");
AMIGAHW_ANNOUNCE(AMI_PARALLEL, "PARALLEL ");
AMIGAHW_ANNOUNCE(A2000_CLK, "A2000_CLK ");
AMIGAHW_ANNOUNCE(A3000_CLK, "A3000_CLK ");
AMIGAHW_ANNOUNCE(CHIP_RAM, "CHIP_RAM ");
AMIGAHW_ANNOUNCE(PAULA, "PAULA ");
AMIGAHW_ANNOUNCE(DENISE, "DENISE ");
AMIGAHW_ANNOUNCE(DENISE_HR, "DENISE_HR ");
AMIGAHW_ANNOUNCE(LISA, "LISA ");
AMIGAHW_ANNOUNCE(AGNUS_PAL, "AGNUS_PAL ");
AMIGAHW_ANNOUNCE(AGNUS_NTSC, "AGNUS_NTSC ");
AMIGAHW_ANNOUNCE(AGNUS_HR_PAL, "AGNUS_HR_PAL ");
AMIGAHW_ANNOUNCE(AGNUS_HR_NTSC, "AGNUS_HR_NTSC ");
AMIGAHW_ANNOUNCE(ALICE_PAL, "ALICE_PAL ");
AMIGAHW_ANNOUNCE(ALICE_NTSC, "ALICE_NTSC ");
AMIGAHW_ANNOUNCE(MAGIC_REKICK, "MAGIC_REKICK ");
AMIGAHW_ANNOUNCE(PCMCIA, "PCMCIA ");
if (AMIGAHW_PRESENT(ZORRO))
pr_cont("ZORRO%s ", AMIGAHW_PRESENT(ZORRO3) ? "3" : "");
pr_cont("\n");
#undef AMIGAHW_ANNOUNCE
}
static unsigned long amiga_random_get_entropy(void)
{
/* VPOSR/VHPOSR provide at least 17 bits of data changing at 1.79 MHz */
return *(unsigned long *)&amiga_custom.vposr;
}
/*
* Setup the Amiga configuration info
*/
void __init config_amiga(void)
{
int i;
amiga_identify();
/* Yuk, we don't have PCI memory */
iomem_resource.name = "Memory";
for (i = 0; i < 4; i++)
request_resource(&iomem_resource, &((struct resource *)&mb_resources)[i]);
mach_sched_init = amiga_sched_init;
mach_init_IRQ = amiga_init_IRQ;
mach_get_model = amiga_get_model;
mach_get_hardware_list = amiga_get_hardware_list;
mach_reset = amiga_reset;
#if IS_ENABLED(CONFIG_INPUT_M68K_BEEP)
mach_beep = amiga_mksound;
#endif
#ifdef CONFIG_HEARTBEAT
mach_heartbeat = amiga_heartbeat;
#endif
mach_random_get_entropy = amiga_random_get_entropy;
/* Fill in the clock value (based on the 700 kHz E-Clock) */
amiga_colorclock = 5*amiga_eclock; /* 3.5 MHz */
/* clear all DMA bits */
amiga_custom.dmacon = DMAF_ALL;
/* ensure that the DMA master bit is set */
amiga_custom.dmacon = DMAF_SETCLR | DMAF_MASTER;
/* don't use Z2 RAM as system memory on Z3 capable machines */
if (AMIGAHW_PRESENT(ZORRO3)) {
int i, j;
u32 disabled_z2mem = 0;
for (i = 0; i < m68k_num_memory; i++) {
if (m68k_memory[i].addr < 16*1024*1024) {
if (i == 0) {
/* don't cut off the branch we're sitting on */
pr_warn("Warning: kernel runs in Zorro II memory\n");
continue;
}
disabled_z2mem += m68k_memory[i].size;
m68k_num_memory--;
for (j = i; j < m68k_num_memory; j++)
m68k_memory[j] = m68k_memory[j+1];
i--;
}
}
if (disabled_z2mem)
pr_info("%dK of Zorro II memory will not be used as system memory\n",
disabled_z2mem>>10);
}
/* request all RAM */
for (i = 0; i < m68k_num_memory; i++) {
ram_resource[i].name =
(m68k_memory[i].addr >= 0x01000000) ? "32-bit Fast RAM" :
(m68k_memory[i].addr < 0x00c00000) ? "16-bit Fast RAM" :
"16-bit Slow RAM";
ram_resource[i].start = m68k_memory[i].addr;
ram_resource[i].end = m68k_memory[i].addr+m68k_memory[i].size-1;
request_resource(&iomem_resource, &ram_resource[i]);
}
/* initialize chipram allocator */
amiga_chip_init();
/* our beloved beeper */
if (AMIGAHW_PRESENT(AMI_AUDIO))
amiga_init_sound();
/*
* if it is an A3000, set the magic bit that forces
* a hard rekick
*/
if (AMIGAHW_PRESENT(MAGIC_REKICK))
*(unsigned char *)ZTWO_VADDR(0xde0002) |= 0x80;
}
static u64 amiga_read_clk(struct clocksource *cs);
static struct clocksource amiga_clk = {
.name = "ciab",
.rating = 250,
.read = amiga_read_clk,
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static unsigned short jiffy_ticks;
static u32 clk_total, clk_offset;
static irqreturn_t ciab_timer_handler(int irq, void *dev_id)
{
clk_total += jiffy_ticks;
clk_offset = 0;
legacy_timer_tick(1);
timer_heartbeat();
return IRQ_HANDLED;
}
static void __init amiga_sched_init(void)
{
static struct resource sched_res = {
.name = "timer", .start = 0x00bfd400, .end = 0x00bfd5ff,
};
jiffy_ticks = DIV_ROUND_CLOSEST(amiga_eclock, HZ);
if (request_resource(&mb_resources._ciab, &sched_res))
pr_warn("Cannot allocate ciab.ta{lo,hi}\n");
ciab.cra &= 0xC0; /* turn off timer A, continuous mode, from Eclk */
ciab.talo = jiffy_ticks % 256;
ciab.tahi = jiffy_ticks / 256;
/* install interrupt service routine for CIAB Timer A
*
* Please don't change this to use ciaa, as it interferes with the
* SCSI code. We'll have to take a look at this later
*/
if (request_irq(IRQ_AMIGA_CIAB_TA, ciab_timer_handler, IRQF_TIMER,
"timer", NULL))
pr_err("Couldn't register timer interrupt\n");
/* start timer */
ciab.cra |= 0x11;
clocksource_register_hz(&amiga_clk, amiga_eclock);
}
static u64 amiga_read_clk(struct clocksource *cs)
{
unsigned short hi, lo, hi2;
unsigned long flags;
u32 ticks;
local_irq_save(flags);
/* read CIA B timer A current value */
hi = ciab.tahi;
lo = ciab.talo;
hi2 = ciab.tahi;
if (hi != hi2) {
lo = ciab.talo;
hi = hi2;
}
ticks = hi << 8 | lo;
if (ticks > jiffy_ticks / 2)
/* check for pending interrupt */
if (cia_set_irq(&ciab_base, 0) & CIA_ICR_TA)
clk_offset = jiffy_ticks;
ticks = jiffy_ticks - ticks;
ticks += clk_offset + clk_total;
local_irq_restore(flags);
return ticks;
}
static void amiga_reset(void) __noreturn;
static void amiga_reset(void)
{
unsigned long jmp_addr040 = virt_to_phys(&&jmp_addr_label040);
unsigned long jmp_addr = virt_to_phys(&&jmp_addr_label);
local_irq_disable();
if (CPU_IS_040_OR_060)
/* Setup transparent translation registers for mapping
* of 16 MB kernel segment before disabling translation
*/
asm volatile ("\n"
" move.l %0,%%d0\n"
" and.l #0xff000000,%%d0\n"
" or.w #0xe020,%%d0\n" /* map 16 MB, enable, cacheable */
" .chip 68040\n"
" movec %%d0,%%itt0\n"
" movec %%d0,%%dtt0\n"
" .chip 68k\n"
" jmp %0@\n"
: /* no outputs */
: "a" (jmp_addr040)
: "d0");
else
/* for 680[23]0, just disable translation and jump to the physical
* address of the label
*/
asm volatile ("\n"
" pmove %%tc,%@\n"
" bclr #7,%@\n"
" pmove %@,%%tc\n"
" jmp %0@\n"
: /* no outputs */
: "a" (jmp_addr));
jmp_addr_label040:
/* disable translation on '040 now */
asm volatile ("\n"
" moveq #0,%%d0\n"
" .chip 68040\n"
" movec %%d0,%%tc\n" /* disable MMU */
" .chip 68k\n"
: /* no outputs */
: /* no inputs */
: "d0");
jmp_addr_label:
/* pickup reset address from AmigaOS ROM, reset devices and jump
* to reset address
*/
asm volatile ("\n"
" move.w #0x2700,%sr\n"
" lea 0x01000000,%a0\n"
" sub.l %a0@(-0x14),%a0\n"
" move.l %a0@(4),%a0\n"
" subq.l #2,%a0\n"
" jra 1f\n"
/* align on a longword boundary */
" " __ALIGN_STR "\n"
"1:\n"
" reset\n"
" jmp %a0@");
for (;;)
;
}
/*
* Debugging
*/
#define SAVEKMSG_MAXMEM 128*1024
#define SAVEKMSG_MAGIC1 0x53415645 /* 'SAVE' */
#define SAVEKMSG_MAGIC2 0x4B4D5347 /* 'KMSG' */
struct savekmsg {
unsigned long magic1; /* SAVEKMSG_MAGIC1 */
unsigned long magic2; /* SAVEKMSG_MAGIC2 */
unsigned long magicptr; /* address of magic1 */
unsigned long size;
char data[];
};
static struct savekmsg *savekmsg;
static void amiga_mem_console_write(struct console *co, const char *s,
unsigned int count)
{
if (savekmsg->size + count <= SAVEKMSG_MAXMEM-sizeof(struct savekmsg)) {
memcpy(savekmsg->data + savekmsg->size, s, count);
savekmsg->size += count;
}
}
static int __init amiga_savekmsg_setup(char *arg)
{
bool registered;
if (!MACH_IS_AMIGA || strcmp(arg, "mem"))
return 0;
if (amiga_chip_size < SAVEKMSG_MAXMEM) {
pr_err("Not enough chipram for debugging\n");
return -ENOMEM;
}
/* Just steal the block, the chipram allocator isn't functional yet */
amiga_chip_size -= SAVEKMSG_MAXMEM;
savekmsg = ZTWO_VADDR(CHIP_PHYSADDR + amiga_chip_size);
savekmsg->magic1 = SAVEKMSG_MAGIC1;
savekmsg->magic2 = SAVEKMSG_MAGIC2;
savekmsg->magicptr = ZTWO_PADDR(savekmsg);
savekmsg->size = 0;
registered = !!amiga_console_driver.write;
amiga_console_driver.write = amiga_mem_console_write;
if (!registered)
register_console(&amiga_console_driver);
return 0;
}
early_param("debug", amiga_savekmsg_setup);
static void amiga_serial_putc(char c)
{
amiga_custom.serdat = (unsigned char)c | 0x100;
while (!(amiga_custom.serdatr & 0x2000))
;
}
static void amiga_serial_console_write(struct console *co, const char *s,
unsigned int count)
{
while (count--) {
if (*s == '\n')
amiga_serial_putc('\r');
amiga_serial_putc(*s++);
}
}
#if 0
void amiga_serial_puts(const char *s)
{
amiga_serial_console_write(NULL, s, strlen(s));
}
int amiga_serial_console_wait_key(struct console *co)
{
int ch;
while (!(amiga_custom.intreqr & IF_RBF))
barrier();
ch = amiga_custom.serdatr & 0xff;
/* clear the interrupt, so that another character can be read */
amiga_custom.intreq = IF_RBF;
return ch;
}
void amiga_serial_gets(struct console *co, char *s, int len)
{
int ch, cnt = 0;
while (1) {
ch = amiga_serial_console_wait_key(co);
/* Check for backspace. */
if (ch == 8 || ch == 127) {
if (cnt == 0) {
amiga_serial_putc('\007');
continue;
}
cnt--;
amiga_serial_puts("\010 \010");
continue;
}
/* Check for enter. */
if (ch == 10 || ch == 13)
break;
/* See if line is too long. */
if (cnt >= len + 1) {
amiga_serial_putc(7);
cnt--;
continue;
}
/* Store and echo character. */
s[cnt++] = ch;
amiga_serial_putc(ch);
}
/* Print enter. */
amiga_serial_puts("\r\n");
s[cnt] = 0;
}
#endif
static int __init amiga_debug_setup(char *arg)
{
bool registered;
if (!MACH_IS_AMIGA || strcmp(arg, "ser"))
return 0;
/* no initialization required (?) */
registered = !!amiga_console_driver.write;
amiga_console_driver.write = amiga_serial_console_write;
if (!registered)
register_console(&amiga_console_driver);
return 0;
}
early_param("debug", amiga_debug_setup);
#ifdef CONFIG_HEARTBEAT
static void amiga_heartbeat(int on)
{
if (on)
ciaa.pra &= ~2;
else
ciaa.pra |= 2;
}
#endif
/*
* Amiga specific parts of /proc
*/
static void amiga_get_model(char *model)
{
strcpy(model, amiga_model_name);
}
static void amiga_get_hardware_list(struct seq_file *m)
{
if (AMIGAHW_PRESENT(CHIP_RAM))
seq_printf(m, "Chip RAM:\t%ldK\n", amiga_chip_size>>10);
seq_printf(m, "PS Freq:\t%dHz\nEClock Freq:\t%ldHz\n",
amiga_psfreq, amiga_eclock);
if (AMIGAHW_PRESENT(AMI_VIDEO)) {
char *type;
switch (amiga_chipset) {
case CS_OCS:
type = "OCS";
break;
case CS_ECS:
type = "ECS";
break;
case CS_AGA:
type = "AGA";
break;
default:
type = "Old or Unknown";
break;
}
seq_printf(m, "Graphics:\t%s\n", type);
}
#define AMIGAHW_ANNOUNCE(name, str) \
if (AMIGAHW_PRESENT(name)) \
seq_printf (m, "\t%s\n", str)
seq_puts(m, "Detected hardware:\n");
AMIGAHW_ANNOUNCE(AMI_VIDEO, "Amiga Video");
AMIGAHW_ANNOUNCE(AMI_BLITTER, "Blitter");
AMIGAHW_ANNOUNCE(AMBER_FF, "Amber Flicker Fixer");
AMIGAHW_ANNOUNCE(AMI_AUDIO, "Amiga Audio");
AMIGAHW_ANNOUNCE(AMI_FLOPPY, "Floppy Controller");
AMIGAHW_ANNOUNCE(A3000_SCSI, "SCSI Controller WD33C93 (A3000 style)");
AMIGAHW_ANNOUNCE(A4000_SCSI, "SCSI Controller NCR53C710 (A4000T style)");
AMIGAHW_ANNOUNCE(A1200_IDE, "IDE Interface (A1200 style)");
AMIGAHW_ANNOUNCE(A4000_IDE, "IDE Interface (A4000 style)");
AMIGAHW_ANNOUNCE(CD_ROM, "Internal CD ROM drive");
AMIGAHW_ANNOUNCE(AMI_KEYBOARD, "Keyboard");
AMIGAHW_ANNOUNCE(AMI_MOUSE, "Mouse Port");
AMIGAHW_ANNOUNCE(AMI_SERIAL, "Serial Port");
AMIGAHW_ANNOUNCE(AMI_PARALLEL, "Parallel Port");
AMIGAHW_ANNOUNCE(A2000_CLK, "Hardware Clock (A2000 style)");
AMIGAHW_ANNOUNCE(A3000_CLK, "Hardware Clock (A3000 style)");
AMIGAHW_ANNOUNCE(CHIP_RAM, "Chip RAM");
AMIGAHW_ANNOUNCE(PAULA, "Paula 8364");
AMIGAHW_ANNOUNCE(DENISE, "Denise 8362");
AMIGAHW_ANNOUNCE(DENISE_HR, "Denise 8373");
AMIGAHW_ANNOUNCE(LISA, "Lisa 8375");
AMIGAHW_ANNOUNCE(AGNUS_PAL, "Normal/Fat PAL Agnus 8367/8371");
AMIGAHW_ANNOUNCE(AGNUS_NTSC, "Normal/Fat NTSC Agnus 8361/8370");
AMIGAHW_ANNOUNCE(AGNUS_HR_PAL, "Fat Hires PAL Agnus 8372");
AMIGAHW_ANNOUNCE(AGNUS_HR_NTSC, "Fat Hires NTSC Agnus 8372");
AMIGAHW_ANNOUNCE(ALICE_PAL, "PAL Alice 8374");
AMIGAHW_ANNOUNCE(ALICE_NTSC, "NTSC Alice 8374");
AMIGAHW_ANNOUNCE(MAGIC_REKICK, "Magic Hard Rekick");
AMIGAHW_ANNOUNCE(PCMCIA, "PCMCIA Slot");
#ifdef CONFIG_ZORRO
if (AMIGAHW_PRESENT(ZORRO))
seq_printf(m, "\tZorro II%s AutoConfig: %d Expansion "
"Device%s\n",
AMIGAHW_PRESENT(ZORRO3) ? "I" : "",
zorro_num_autocon, zorro_num_autocon == 1 ? "" : "s");
#endif /* CONFIG_ZORRO */
#undef AMIGAHW_ANNOUNCE
}
/*
* The Amiga keyboard driver needs key_maps, but we cannot export it in
* drivers/char/defkeymap.c, as it is autogenerated
*/
#ifdef CONFIG_HW_CONSOLE
EXPORT_SYMBOL_GPL(key_maps);
#endif