linux/arch/alpha/kernel/core_polaris.c
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

204 lines
4.5 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
* linux/arch/alpha/kernel/core_polaris.c
*
* POLARIS chip-specific code
*/
#define __EXTERN_INLINE inline
#include <asm/io.h>
#include <asm/core_polaris.h>
#undef __EXTERN_INLINE
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <asm/ptrace.h>
#include "proto.h"
#include "pci_impl.h"
/*
* BIOS32-style PCI interface:
*/
#define DEBUG_CONFIG 0
#if DEBUG_CONFIG
# define DBG_CFG(args) printk args
#else
# define DBG_CFG(args)
#endif
/*
* Given a bus, device, and function number, compute resulting
* configuration space address. This is fairly straightforward
* on POLARIS, since the chip itself generates Type 0 or Type 1
* cycles automatically depending on the bus number (Bus 0 is
* hardwired to Type 0, all others are Type 1. Peer bridges
* are not supported).
*
* All types:
*
* 3 3 3 3|3 3 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
* 9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |1|1|1|1|1|0|0|1|1|1|1|1|1|1|1|0|B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|x|x|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*
* 23:16 bus number (8 bits = 128 possible buses)
* 15:11 Device number (5 bits)
* 10:8 function number
* 7:2 register number
*
* Notes:
* The function number selects which function of a multi-function device
* (e.g., scsi and ethernet).
*
* The register selects a DWORD (32 bit) register offset. Hence it
* doesn't get shifted by 2 bits as we want to "drop" the bottom two
* bits.
*/
static int
mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
unsigned long *pci_addr, u8 *type1)
{
u8 bus = pbus->number;
*type1 = (bus == 0) ? 0 : 1;
*pci_addr = (bus << 16) | (device_fn << 8) | (where) |
POLARIS_DENSE_CONFIG_BASE;
DBG_CFG(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x,"
" returning address 0x%p\n"
bus, device_fn, where, *pci_addr));
return 0;
}
static int
polaris_read_config(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 *value)
{
unsigned long addr;
unsigned char type1;
if (mk_conf_addr(bus, devfn, where, &addr, &type1))
return PCIBIOS_DEVICE_NOT_FOUND;
switch (size) {
case 1:
*value = __kernel_ldbu(*(vucp)addr);
break;
case 2:
*value = __kernel_ldwu(*(vusp)addr);
break;
case 4:
*value = *(vuip)addr;
break;
}
return PCIBIOS_SUCCESSFUL;
}
static int
polaris_write_config(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 value)
{
unsigned long addr;
unsigned char type1;
if (mk_conf_addr(bus, devfn, where, &addr, &type1))
return PCIBIOS_DEVICE_NOT_FOUND;
switch (size) {
case 1:
__kernel_stb(value, *(vucp)addr);
mb();
__kernel_ldbu(*(vucp)addr);
break;
case 2:
__kernel_stw(value, *(vusp)addr);
mb();
__kernel_ldwu(*(vusp)addr);
break;
case 4:
*(vuip)addr = value;
mb();
*(vuip)addr;
break;
}
return PCIBIOS_SUCCESSFUL;
}
struct pci_ops polaris_pci_ops =
{
.read = polaris_read_config,
.write = polaris_write_config,
};
void __init
polaris_init_arch(void)
{
struct pci_controller *hose;
/* May need to initialize error reporting (see PCICTL0/1), but
* for now assume that the firmware has done the right thing
* already.
*/
#if 0
printk("polaris_init_arch(): trusting firmware for setup\n");
#endif
/*
* Create our single hose.
*/
pci_isa_hose = hose = alloc_pci_controller();
hose->io_space = &ioport_resource;
hose->mem_space = &iomem_resource;
hose->index = 0;
hose->sparse_mem_base = 0;
hose->dense_mem_base = POLARIS_DENSE_MEM_BASE - IDENT_ADDR;
hose->sparse_io_base = 0;
hose->dense_io_base = POLARIS_DENSE_IO_BASE - IDENT_ADDR;
hose->sg_isa = hose->sg_pci = NULL;
/* The I/O window is fixed at 2G @ 2G. */
__direct_map_base = 0x80000000;
__direct_map_size = 0x80000000;
}
static inline void
polaris_pci_clr_err(void)
{
*(vusp)POLARIS_W_STATUS;
/* Write 1's to settable bits to clear errors */
*(vusp)POLARIS_W_STATUS = 0x7800;
mb();
*(vusp)POLARIS_W_STATUS;
}
void
polaris_machine_check(unsigned long vector, unsigned long la_ptr,
struct pt_regs * regs)
{
/* Clear the error before any reporting. */
mb();
mb();
draina();
polaris_pci_clr_err();
wrmces(0x7);
mb();
process_mcheck_info(vector, la_ptr, regs, "POLARIS",
mcheck_expected(0));
}