linux/arch/powerpc/platforms/embedded6xx/storcenter.c
Jon Loeliger 0367aad1ad [POWERPC] Fix storcenter DTS typos, feedback, IRQs.
Cleaned up IRQ layout and removed unsused ISU allocations.
Fixed RTC address typo from /dts-v1/ conversion.
Incorporated list suggestions to use an "iomega," vendor prefix,
and to use a node reference rather than a hard path.

Signed-off-by: Jon Loeliger <jdl@@jdl.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-05 23:33:46 -06:00

178 lines
3.8 KiB
C

/*
* Board setup routines for the storcenter
*
* Copyright 2007 (C) Oyvind Repvik (nail@nslu2-linux.org)
* Copyright 2007 Andy Wilcox, Jon Loeliger
*
* Based on linkstation.c by G. Liakhovetski
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of
* any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/initrd.h>
#include <linux/mtd/physmap.h>
#include <linux/of_platform.h>
#include <asm/system.h>
#include <asm/time.h>
#include <asm/prom.h>
#include <asm/mpic.h>
#include <asm/pci-bridge.h>
#include "mpc10x.h"
#ifdef CONFIG_MTD_PHYSMAP
static struct mtd_partition storcenter_physmap_partitions[] = {
{
.name = "kernel",
.offset = 0x000000,
.size = 0x170000,
},
{
.name = "rootfs",
.offset = 0x170000,
.size = 0x590000,
},
{
.name = "uboot",
.offset = 0x700000,
.size = 0x040000,
},
{
.name = "config",
.offset = 0x740000,
.size = 0x0c0000,
},
};
#endif
static __initdata struct of_device_id storcenter_of_bus[] = {
{ .name = "soc", },
{},
};
static int __init storcenter_device_probe(void)
{
of_platform_bus_probe(NULL, storcenter_of_bus, NULL);
return 0;
}
machine_device_initcall(storcenter, storcenter_device_probe);
static int __init storcenter_add_bridge(struct device_node *dev)
{
#ifdef CONFIG_PCI
int len;
struct pci_controller *hose;
const int *bus_range;
printk("Adding PCI host bridge %s\n", dev->full_name);
hose = pcibios_alloc_controller(dev);
if (hose == NULL)
return -ENOMEM;
bus_range = of_get_property(dev, "bus-range", &len);
hose->first_busno = bus_range ? bus_range[0] : 0;
hose->last_busno = bus_range ? bus_range[1] : 0xff;
setup_indirect_pci(hose, MPC10X_MAPB_CNFG_ADDR, MPC10X_MAPB_CNFG_DATA, 0);
/* Interpret the "ranges" property */
/* This also maps the I/O region and sets isa_io/mem_base */
pci_process_bridge_OF_ranges(hose, dev, 1);
#endif
return 0;
}
static void __init storcenter_setup_arch(void)
{
struct device_node *np;
#ifdef CONFIG_MTD_PHYSMAP
physmap_set_partitions(storcenter_physmap_partitions,
ARRAY_SIZE(storcenter_physmap_partitions));
#endif
/* Lookup PCI host bridges */
for_each_compatible_node(np, "pci", "mpc10x-pci")
storcenter_add_bridge(np);
printk(KERN_INFO "IOMEGA StorCenter\n");
}
/*
* Interrupt setup and service. Interrrupts on the turbostation come
* from the four PCI slots plus onboard 8241 devices: I2C, DUART.
*/
static void __init storcenter_init_IRQ(void)
{
struct mpic *mpic;
struct device_node *dnp;
const void *prop;
int size;
phys_addr_t paddr;
dnp = of_find_node_by_type(NULL, "open-pic");
if (dnp == NULL)
return;
prop = of_get_property(dnp, "reg", &size);
if (prop == NULL) {
of_node_put(dnp);
return;
}
paddr = (phys_addr_t)of_translate_address(dnp, prop);
mpic = mpic_alloc(dnp, paddr, MPIC_PRIMARY | MPIC_WANTS_RESET,
16, 32, " OpenPIC ");
of_node_put(dnp);
BUG_ON(mpic == NULL);
/*
* 16 Serial Interrupts followed by 16 Internal Interrupts.
* I2C is the second internal, so it is at 17, 0x11020.
*/
mpic_assign_isu(mpic, 0, paddr + 0x10200);
mpic_assign_isu(mpic, 1, paddr + 0x11000);
mpic_init(mpic);
}
static void storcenter_restart(char *cmd)
{
local_irq_disable();
/* Set exception prefix high - to the firmware */
_nmask_and_or_msr(0, MSR_IP);
/* Wait for reset to happen */
for (;;) ;
}
static int __init storcenter_probe(void)
{
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "iomega,storcenter");
}
define_machine(storcenter){
.name = "IOMEGA StorCenter",
.probe = storcenter_probe,
.setup_arch = storcenter_setup_arch,
.init_IRQ = storcenter_init_IRQ,
.get_irq = mpic_get_irq,
.restart = storcenter_restart,
.calibrate_decr = generic_calibrate_decr,
};