linux/drivers/iio/pressure/st_pressure.h
mario tesi e5aab7b0d8 iio:st_pressure:initial lps22hh sensor support
Initial support for ST LPS22HH pressure sensor. Datasheet:
http://www2.st.com/resource/en/datasheet/lps22hh.pdf

Features:
 * pressure, temperature data and timestamping channels
 * sampling frequency selection [1..200] Hz
 * interrupt based trigger
 * over I2C or SPI interface

Signed-off-by: mario tesi <mario.tesi@st.com>
Acked-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-01-19 17:32:41 +00:00

65 lines
1.5 KiB
C

/*
* STMicroelectronics pressures driver
*
* Copyright 2013 STMicroelectronics Inc.
*
* Denis Ciocca <denis.ciocca@st.com>
* v. 1.0.0
* Licensed under the GPL-2.
*/
#ifndef ST_PRESS_H
#define ST_PRESS_H
#include <linux/types.h>
#include <linux/iio/common/st_sensors.h>
enum st_press_type {
LPS001WP,
LPS25H,
LPS331AP,
LPS22HB,
LPS33HW,
LPS35HW,
LPS22HH,
ST_PRESS_MAX,
};
#define LPS001WP_PRESS_DEV_NAME "lps001wp"
#define LPS25H_PRESS_DEV_NAME "lps25h"
#define LPS331AP_PRESS_DEV_NAME "lps331ap"
#define LPS22HB_PRESS_DEV_NAME "lps22hb"
#define LPS33HW_PRESS_DEV_NAME "lps33hw"
#define LPS35HW_PRESS_DEV_NAME "lps35hw"
#define LPS22HH_PRESS_DEV_NAME "lps22hh"
/**
* struct st_sensors_platform_data - default press platform data
* @drdy_int_pin: default press DRDY is available on INT1 pin.
*/
static const struct st_sensors_platform_data default_press_pdata = {
.drdy_int_pin = 1,
};
int st_press_common_probe(struct iio_dev *indio_dev);
void st_press_common_remove(struct iio_dev *indio_dev);
#ifdef CONFIG_IIO_BUFFER
int st_press_allocate_ring(struct iio_dev *indio_dev);
void st_press_deallocate_ring(struct iio_dev *indio_dev);
int st_press_trig_set_state(struct iio_trigger *trig, bool state);
#define ST_PRESS_TRIGGER_SET_STATE (&st_press_trig_set_state)
#else /* CONFIG_IIO_BUFFER */
static inline int st_press_allocate_ring(struct iio_dev *indio_dev)
{
return 0;
}
static inline void st_press_deallocate_ring(struct iio_dev *indio_dev)
{
}
#define ST_PRESS_TRIGGER_SET_STATE NULL
#endif /* CONFIG_IIO_BUFFER */
#endif /* ST_PRESS_H */