linux/arch/powerpc/kernel/fsl_booke_entry_mapping.S
Matthew McClintock 77154a2026 powerpc/fsl-booke: Fix address issue when using relocatable kernels
When booting a relocatable kernel it needs to jump to the correct
start address, which for BookE parts is usually unchanged
regardless of the physical memory offset.

Recent changes cause problems with how we calculate the start
address, it was always adding the RMO into the start address
which is incorrect. This patch only adds in the RMO offset
if we are in the kexec code path, as it needs the RMO to work
correctly.

Instead of adding the RMO offset in in the common code path, we
can just set r6 to the RMO offset in the kexec code path instead
of to zero, and finally perform the masking in the common code
path

Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-07-11 11:04:08 -05:00

236 lines
5.5 KiB
ArmAsm

/* 1. Find the index of the entry we're executing in */
bl invstr /* Find our address */
invstr: mflr r6 /* Make it accessible */
mfmsr r7
rlwinm r4,r7,27,31,31 /* extract MSR[IS] */
mfspr r7, SPRN_PID0
slwi r7,r7,16
or r7,r7,r4
mtspr SPRN_MAS6,r7
tlbsx 0,r6 /* search MSR[IS], SPID=PID0 */
mfspr r7,SPRN_MAS1
andis. r7,r7,MAS1_VALID@h
bne match_TLB
mfspr r7,SPRN_MMUCFG
rlwinm r7,r7,21,28,31 /* extract MMUCFG[NPIDS] */
cmpwi r7,3
bne match_TLB /* skip if NPIDS != 3 */
mfspr r7,SPRN_PID1
slwi r7,r7,16
or r7,r7,r4
mtspr SPRN_MAS6,r7
tlbsx 0,r6 /* search MSR[IS], SPID=PID1 */
mfspr r7,SPRN_MAS1
andis. r7,r7,MAS1_VALID@h
bne match_TLB
mfspr r7, SPRN_PID2
slwi r7,r7,16
or r7,r7,r4
mtspr SPRN_MAS6,r7
tlbsx 0,r6 /* Fall through, we had to match */
match_TLB:
mfspr r7,SPRN_MAS0
rlwinm r3,r7,16,20,31 /* Extract MAS0(Entry) */
mfspr r7,SPRN_MAS1 /* Insure IPROT set */
oris r7,r7,MAS1_IPROT@h
mtspr SPRN_MAS1,r7
tlbwe
/* 2. Invalidate all entries except the entry we're executing in */
mfspr r9,SPRN_TLB1CFG
andi. r9,r9,0xfff
li r6,0 /* Set Entry counter to 0 */
1: lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
rlwimi r7,r6,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r6) */
mtspr SPRN_MAS0,r7
tlbre
mfspr r7,SPRN_MAS1
rlwinm r7,r7,0,2,31 /* Clear MAS1 Valid and IPROT */
cmpw r3,r6
beq skpinv /* Dont update the current execution TLB */
mtspr SPRN_MAS1,r7
tlbwe
isync
skpinv: addi r6,r6,1 /* Increment */
cmpw r6,r9 /* Are we done? */
bne 1b /* If not, repeat */
/* Invalidate TLB0 */
li r6,0x04
tlbivax 0,r6
TLBSYNC
/* Invalidate TLB1 */
li r6,0x0c
tlbivax 0,r6
TLBSYNC
/* 3. Setup a temp mapping and jump to it */
andi. r5, r3, 0x1 /* Find an entry not used and is non-zero */
addi r5, r5, 0x1
lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */
mtspr SPRN_MAS0,r7
tlbre
/* grab and fixup the RPN */
mfspr r6,SPRN_MAS1 /* extract MAS1[SIZE] */
rlwinm r6,r6,25,27,31
li r8,-1
addi r6,r6,10
slw r6,r8,r6 /* convert to mask */
bl 1f /* Find our address */
1: mflr r7
mfspr r8,SPRN_MAS3
#ifdef CONFIG_PHYS_64BIT
mfspr r23,SPRN_MAS7
#endif
and r8,r6,r8
subfic r9,r6,-4096
and r9,r9,r7
or r25,r8,r9
ori r8,r25,(MAS3_SX|MAS3_SW|MAS3_SR)
/* Just modify the entry ID and EPN for the temp mapping */
lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */
mtspr SPRN_MAS0,r7
xori r6,r4,1 /* Setup TMP mapping in the other Address space */
slwi r6,r6,12
oris r6,r6,(MAS1_VALID|MAS1_IPROT)@h
ori r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_4K))@l
mtspr SPRN_MAS1,r6
mfspr r6,SPRN_MAS2
li r7,0 /* temp EPN = 0 */
rlwimi r7,r6,0,20,31
mtspr SPRN_MAS2,r7
mtspr SPRN_MAS3,r8
tlbwe
xori r6,r4,1
slwi r6,r6,5 /* setup new context with other address space */
bl 1f /* Find our address */
1: mflr r9
rlwimi r7,r9,0,20,31
addi r7,r7,(2f - 1b)
mtspr SPRN_SRR0,r7
mtspr SPRN_SRR1,r6
rfi
2:
/* 4. Clear out PIDs & Search info */
li r6,0
mtspr SPRN_MAS6,r6
mtspr SPRN_PID0,r6
mfspr r7,SPRN_MMUCFG
rlwinm r7,r7,21,28,31 /* extract MMUCFG[NPIDS] */
cmpwi r7,3
bne 2f /* skip if NPIDS != 3 */
mtspr SPRN_PID1,r6
mtspr SPRN_PID2,r6
/* 5. Invalidate mapping we started in */
2:
lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */
mtspr SPRN_MAS0,r7
tlbre
mfspr r6,SPRN_MAS1
rlwinm r6,r6,0,2,0 /* clear IPROT */
mtspr SPRN_MAS1,r6
tlbwe
/* Invalidate TLB1 */
li r9,0x0c
tlbivax 0,r9
TLBSYNC
/* The mapping only needs to be cache-coherent on SMP */
#ifdef CONFIG_SMP
#define M_IF_SMP MAS2_M
#else
#define M_IF_SMP 0
#endif
#if defined(ENTRY_MAPPING_BOOT_SETUP)
/* 6. Setup KERNELBASE mapping in TLB1[0] */
lis r6,0x1000 /* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */
mtspr SPRN_MAS0,r6
lis r6,(MAS1_VALID|MAS1_IPROT)@h
ori r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_64M))@l
mtspr SPRN_MAS1,r6
lis r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@h
ori r6,r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@l
mtspr SPRN_MAS2,r6
mtspr SPRN_MAS3,r8
tlbwe
/* 7. Jump to KERNELBASE mapping */
lis r6,(KERNELBASE & ~0xfff)@h
ori r6,r6,(KERNELBASE & ~0xfff)@l
#elif defined(ENTRY_MAPPING_KEXEC_SETUP)
/*
* 6. Setup a 1:1 mapping in TLB1. Esel 0 is unsued, 1 or 2 contains the tmp
* mapping so we start at 3. We setup 8 mappings, each 256MiB in size. This
* will cover the first 2GiB of memory.
*/
lis r10, (MAS1_VALID|MAS1_IPROT)@h
ori r10,r10, (MAS1_TSIZE(BOOK3E_PAGESZ_256M))@l
li r11, 0
li r0, 8
mtctr r0
next_tlb_setup:
addi r0, r11, 3
rlwinm r0, r0, 16, 4, 15 // Compute esel
rlwinm r9, r11, 28, 0, 3 // Compute [ER]PN
oris r0, r0, (MAS0_TLBSEL(1))@h
mtspr SPRN_MAS0,r0
mtspr SPRN_MAS1,r10
mtspr SPRN_MAS2,r9
ori r9, r9, (MAS3_SX|MAS3_SW|MAS3_SR)
mtspr SPRN_MAS3,r9
tlbwe
addi r11, r11, 1
bdnz+ next_tlb_setup
/* 7. Jump to our 1:1 mapping */
mr r6, r25
#else
#error You need to specify the mapping or not use this at all.
#endif
lis r7,MSR_KERNEL@h
ori r7,r7,MSR_KERNEL@l
bl 1f /* Find our address */
1: mflr r9
rlwimi r6,r9,0,20,31
addi r6,r6,(2f - 1b)
mtspr SPRN_SRR0,r6
mtspr SPRN_SRR1,r7
rfi /* start execution out of TLB1[0] entry */
/* 8. Clear out the temp mapping */
2: lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */
mtspr SPRN_MAS0,r7
tlbre
mfspr r8,SPRN_MAS1
rlwinm r8,r8,0,2,0 /* clear IPROT */
mtspr SPRN_MAS1,r8
tlbwe
/* Invalidate TLB1 */
li r9,0x0c
tlbivax 0,r9
TLBSYNC