linux/arch/arm/mach-pxa/corgi.c
Sebastian Andrzej Siewior b459396ee9 ARM: pxa2xx: reorganize I2C files
This patch moves the platform data definition from
arch/arm/plat-pxa/include/plat/i2c.h to include/linux/i2c/pxa-i2c.h so
it can be accessed from x86 the same way as on ARM.

This change should make no functional change to the PXA code. The move
is verified by building the following defconfigs:
  cm_x2xx_defconfig corgi_defconfig em_x270_defconfig ezx_defconfig
  imote2_defconfig pxa3xx_defconfig spitz_defconfig zeus_defconfig
  raumfeld_defconfig magician_defconfig mmp2_defconfig pxa168_defconfig
  pxa910_defconfig

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-03-21 09:09:33 +00:00

751 lines
18 KiB
C

/*
* Support for Sharp SL-C7xx PDAs
* Models: SL-C700 (Corgi), SL-C750 (Shepherd), SL-C760 (Husky)
*
* Copyright (c) 2004-2005 Richard Purdie
*
* Based on Sharp's 2.4 kernel patches/lubbock.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/major.h>
#include <linux/fs.h>
#include <linux/interrupt.h>
#include <linux/mmc/host.h>
#include <linux/mtd/physmap.h>
#include <linux/pm.h>
#include <linux/gpio.h>
#include <linux/backlight.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/io.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/spi/corgi_lcd.h>
#include <linux/spi/pxa2xx_spi.h>
#include <linux/mtd/sharpsl.h>
#include <linux/input/matrix_keypad.h>
#include <video/w100fb.h>
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/pxa25x.h>
#include <mach/irda.h>
#include <mach/mmc.h>
#include <mach/udc.h>
#include <mach/corgi.h>
#include <mach/sharpsl_pm.h>
#include <asm/mach/sharpsl_param.h>
#include <asm/hardware/scoop.h>
#include "generic.h"
#include "devices.h"
static unsigned long corgi_pin_config[] __initdata = {
/* Static Memory I/O */
GPIO78_nCS_2, /* w100fb */
GPIO80_nCS_4, /* scoop */
/* SSP1 */
GPIO23_SSP1_SCLK,
GPIO25_SSP1_TXD,
GPIO26_SSP1_RXD,
GPIO24_GPIO, /* CORGI_GPIO_ADS7846_CS - SFRM as chip select */
/* I2S */
GPIO28_I2S_BITCLK_OUT,
GPIO29_I2S_SDATA_IN,
GPIO30_I2S_SDATA_OUT,
GPIO31_I2S_SYNC,
GPIO32_I2S_SYSCLK,
/* Infra-Red */
GPIO47_FICP_TXD,
GPIO46_FICP_RXD,
/* FFUART */
GPIO40_FFUART_DTR,
GPIO41_FFUART_RTS,
GPIO39_FFUART_TXD,
GPIO37_FFUART_DSR,
GPIO34_FFUART_RXD,
GPIO35_FFUART_CTS,
/* PC Card */
GPIO48_nPOE,
GPIO49_nPWE,
GPIO50_nPIOR,
GPIO51_nPIOW,
GPIO52_nPCE_1,
GPIO53_nPCE_2,
GPIO54_nPSKTSEL,
GPIO55_nPREG,
GPIO56_nPWAIT,
GPIO57_nIOIS16,
/* MMC */
GPIO6_MMC_CLK,
GPIO8_MMC_CS0,
/* GPIO Matrix Keypad */
GPIO66_GPIO | MFP_LPM_DRIVE_HIGH, /* column 0 */
GPIO67_GPIO | MFP_LPM_DRIVE_HIGH, /* column 1 */
GPIO68_GPIO | MFP_LPM_DRIVE_HIGH, /* column 2 */
GPIO69_GPIO | MFP_LPM_DRIVE_HIGH, /* column 3 */
GPIO70_GPIO | MFP_LPM_DRIVE_HIGH, /* column 4 */
GPIO71_GPIO | MFP_LPM_DRIVE_HIGH, /* column 5 */
GPIO72_GPIO | MFP_LPM_DRIVE_HIGH, /* column 6 */
GPIO73_GPIO | MFP_LPM_DRIVE_HIGH, /* column 7 */
GPIO74_GPIO | MFP_LPM_DRIVE_HIGH, /* column 8 */
GPIO75_GPIO | MFP_LPM_DRIVE_HIGH, /* column 9 */
GPIO76_GPIO | MFP_LPM_DRIVE_HIGH, /* column 10 */
GPIO77_GPIO | MFP_LPM_DRIVE_HIGH, /* column 11 */
GPIO58_GPIO, /* row 0 */
GPIO59_GPIO, /* row 1 */
GPIO60_GPIO, /* row 2 */
GPIO61_GPIO, /* row 3 */
GPIO62_GPIO, /* row 4 */
GPIO63_GPIO, /* row 5 */
GPIO64_GPIO, /* row 6 */
GPIO65_GPIO, /* row 7 */
/* GPIO */
GPIO9_GPIO, /* CORGI_GPIO_nSD_DETECT */
GPIO7_GPIO, /* CORGI_GPIO_nSD_WP */
GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH, /* CORGI_GPIO_MAIN_BAT_{LOW,COVER} */
GPIO13_GPIO | MFP_LPM_KEEP_OUTPUT, /* CORGI_GPIO_LED_ORANGE */
GPIO21_GPIO, /* CORGI_GPIO_ADC_TEMP */
GPIO22_GPIO, /* CORGI_GPIO_IR_ON */
GPIO33_GPIO, /* CORGI_GPIO_SD_PWR */
GPIO38_GPIO | MFP_LPM_KEEP_OUTPUT, /* CORGI_GPIO_CHRG_ON */
GPIO43_GPIO | MFP_LPM_KEEP_OUTPUT, /* CORGI_GPIO_CHRG_UKN */
GPIO44_GPIO, /* CORGI_GPIO_HSYNC */
GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH, /* CORGI_GPIO_KEY_INT */
GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, /* CORGI_GPIO_AC_IN */
GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH, /* CORGI_GPIO_WAKEUP */
};
/*
* Corgi SCOOP Device
*/
static struct resource corgi_scoop_resources[] = {
[0] = {
.start = 0x10800000,
.end = 0x10800fff,
.flags = IORESOURCE_MEM,
},
};
static struct scoop_config corgi_scoop_setup = {
.io_dir = CORGI_SCOOP_IO_DIR,
.io_out = CORGI_SCOOP_IO_OUT,
.gpio_base = CORGI_SCOOP_GPIO_BASE,
};
struct platform_device corgiscoop_device = {
.name = "sharp-scoop",
.id = -1,
.dev = {
.platform_data = &corgi_scoop_setup,
},
.num_resources = ARRAY_SIZE(corgi_scoop_resources),
.resource = corgi_scoop_resources,
};
static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
{
.dev = &corgiscoop_device.dev,
.irq = CORGI_IRQ_GPIO_CF_IRQ,
.cd_irq = CORGI_IRQ_GPIO_CF_CD,
.cd_irq_str = "PCMCIA0 CD",
},
};
static struct scoop_pcmcia_config corgi_pcmcia_config = {
.devs = &corgi_pcmcia_scoop[0],
.num_devs = 1,
};
static struct w100_mem_info corgi_fb_mem = {
.ext_cntl = 0x00040003,
.sdram_mode_reg = 0x00650021,
.ext_timing_cntl = 0x10002a4a,
.io_cntl = 0x7ff87012,
.size = 0x1fffff,
};
static struct w100_gen_regs corgi_fb_regs = {
.lcd_format = 0x00000003,
.lcdd_cntl1 = 0x01CC0000,
.lcdd_cntl2 = 0x0003FFFF,
.genlcd_cntl1 = 0x00FFFF0D,
.genlcd_cntl2 = 0x003F3003,
.genlcd_cntl3 = 0x000102aa,
};
static struct w100_gpio_regs corgi_fb_gpio = {
.init_data1 = 0x000000bf,
.init_data2 = 0x00000000,
.gpio_dir1 = 0x00000000,
.gpio_oe1 = 0x03c0feff,
.gpio_dir2 = 0x00000000,
.gpio_oe2 = 0x00000000,
};
static struct w100_mode corgi_fb_modes[] = {
{
.xres = 480,
.yres = 640,
.left_margin = 0x56,
.right_margin = 0x55,
.upper_margin = 0x03,
.lower_margin = 0x00,
.crtc_ss = 0x82360056,
.crtc_ls = 0xA0280000,
.crtc_gs = 0x80280028,
.crtc_vpos_gs = 0x02830002,
.crtc_rev = 0x00400008,
.crtc_dclk = 0xA0000000,
.crtc_gclk = 0x8015010F,
.crtc_goe = 0x80100110,
.crtc_ps1_active = 0x41060010,
.pll_freq = 75,
.fast_pll_freq = 100,
.sysclk_src = CLK_SRC_PLL,
.sysclk_divider = 0,
.pixclk_src = CLK_SRC_PLL,
.pixclk_divider = 2,
.pixclk_divider_rotated = 6,
},{
.xres = 240,
.yres = 320,
.left_margin = 0x27,
.right_margin = 0x2e,
.upper_margin = 0x01,
.lower_margin = 0x00,
.crtc_ss = 0x81170027,
.crtc_ls = 0xA0140000,
.crtc_gs = 0xC0140014,
.crtc_vpos_gs = 0x00010141,
.crtc_rev = 0x00400008,
.crtc_dclk = 0xA0000000,
.crtc_gclk = 0x8015010F,
.crtc_goe = 0x80100110,
.crtc_ps1_active = 0x41060010,
.pll_freq = 0,
.fast_pll_freq = 0,
.sysclk_src = CLK_SRC_XTAL,
.sysclk_divider = 0,
.pixclk_src = CLK_SRC_XTAL,
.pixclk_divider = 1,
.pixclk_divider_rotated = 1,
},
};
static struct w100fb_mach_info corgi_fb_info = {
.init_mode = INIT_MODE_ROTATED,
.mem = &corgi_fb_mem,
.regs = &corgi_fb_regs,
.modelist = &corgi_fb_modes[0],
.num_modes = 2,
.gpio = &corgi_fb_gpio,
.xtal_freq = 12500000,
.xtal_dbl = 0,
};
static struct resource corgi_fb_resources[] = {
[0] = {
.start = 0x08000000,
.end = 0x08ffffff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device corgifb_device = {
.name = "w100fb",
.id = -1,
.num_resources = ARRAY_SIZE(corgi_fb_resources),
.resource = corgi_fb_resources,
.dev = {
.platform_data = &corgi_fb_info,
},
};
/*
* Corgi Keyboard Device
*/
#define CORGI_KEY_CALENDER KEY_F1
#define CORGI_KEY_ADDRESS KEY_F2
#define CORGI_KEY_FN KEY_F3
#define CORGI_KEY_CANCEL KEY_F4
#define CORGI_KEY_OFF KEY_SUSPEND
#define CORGI_KEY_EXOK KEY_F5
#define CORGI_KEY_EXCANCEL KEY_F6
#define CORGI_KEY_EXJOGDOWN KEY_F7
#define CORGI_KEY_EXJOGUP KEY_F8
#define CORGI_KEY_JAP1 KEY_LEFTCTRL
#define CORGI_KEY_JAP2 KEY_LEFTALT
#define CORGI_KEY_MAIL KEY_F10
#define CORGI_KEY_OK KEY_F11
#define CORGI_KEY_MENU KEY_F12
static const uint32_t corgikbd_keymap[] = {
KEY(0, 1, KEY_1),
KEY(0, 2, KEY_3),
KEY(0, 3, KEY_5),
KEY(0, 4, KEY_6),
KEY(0, 5, KEY_7),
KEY(0, 6, KEY_9),
KEY(0, 7, KEY_0),
KEY(0, 8, KEY_BACKSPACE),
KEY(1, 1, KEY_2),
KEY(1, 2, KEY_4),
KEY(1, 3, KEY_R),
KEY(1, 4, KEY_Y),
KEY(1, 5, KEY_8),
KEY(1, 6, KEY_I),
KEY(1, 7, KEY_O),
KEY(1, 8, KEY_P),
KEY(2, 0, KEY_TAB),
KEY(2, 1, KEY_Q),
KEY(2, 2, KEY_E),
KEY(2, 3, KEY_T),
KEY(2, 4, KEY_G),
KEY(2, 5, KEY_U),
KEY(2, 6, KEY_J),
KEY(2, 7, KEY_K),
KEY(3, 0, CORGI_KEY_CALENDER),
KEY(3, 1, KEY_W),
KEY(3, 2, KEY_S),
KEY(3, 3, KEY_F),
KEY(3, 4, KEY_V),
KEY(3, 5, KEY_H),
KEY(3, 6, KEY_M),
KEY(3, 7, KEY_L),
KEY(3, 9, KEY_RIGHTSHIFT),
KEY(4, 0, CORGI_KEY_ADDRESS),
KEY(4, 1, KEY_A),
KEY(4, 2, KEY_D),
KEY(4, 3, KEY_C),
KEY(4, 4, KEY_B),
KEY(4, 5, KEY_N),
KEY(4, 6, KEY_DOT),
KEY(4, 8, KEY_ENTER),
KEY(4, 10, KEY_LEFTSHIFT),
KEY(5, 0, CORGI_KEY_MAIL),
KEY(5, 1, KEY_Z),
KEY(5, 2, KEY_X),
KEY(5, 3, KEY_MINUS),
KEY(5, 4, KEY_SPACE),
KEY(5, 5, KEY_COMMA),
KEY(5, 7, KEY_UP),
KEY(5, 11, CORGI_KEY_FN),
KEY(6, 0, KEY_SYSRQ),
KEY(6, 1, CORGI_KEY_JAP1),
KEY(6, 2, CORGI_KEY_JAP2),
KEY(6, 3, CORGI_KEY_CANCEL),
KEY(6, 4, CORGI_KEY_OK),
KEY(6, 5, CORGI_KEY_MENU),
KEY(6, 6, KEY_LEFT),
KEY(6, 7, KEY_DOWN),
KEY(6, 8, KEY_RIGHT),
KEY(7, 0, CORGI_KEY_OFF),
KEY(7, 1, CORGI_KEY_EXOK),
KEY(7, 2, CORGI_KEY_EXCANCEL),
KEY(7, 3, CORGI_KEY_EXJOGDOWN),
KEY(7, 4, CORGI_KEY_EXJOGUP),
};
static struct matrix_keymap_data corgikbd_keymap_data = {
.keymap = corgikbd_keymap,
.keymap_size = ARRAY_SIZE(corgikbd_keymap),
};
static const int corgikbd_row_gpios[] =
{ 58, 59, 60, 61, 62, 63, 64, 65 };
static const int corgikbd_col_gpios[] =
{ 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77 };
static struct matrix_keypad_platform_data corgikbd_pdata = {
.keymap_data = &corgikbd_keymap_data,
.row_gpios = corgikbd_row_gpios,
.col_gpios = corgikbd_col_gpios,
.num_row_gpios = ARRAY_SIZE(corgikbd_row_gpios),
.num_col_gpios = ARRAY_SIZE(corgikbd_col_gpios),
.col_scan_delay_us = 10,
.debounce_ms = 10,
.wakeup = 1,
};
static struct platform_device corgikbd_device = {
.name = "matrix-keypad",
.id = -1,
.dev = {
.platform_data = &corgikbd_pdata,
},
};
/*
* Corgi LEDs
*/
static struct gpio_led corgi_gpio_leds[] = {
{
.name = "corgi:amber:charge",
.default_trigger = "sharpsl-charge",
.gpio = CORGI_GPIO_LED_ORANGE,
},
{
.name = "corgi:green:mail",
.default_trigger = "nand-disk",
.gpio = CORGI_GPIO_LED_GREEN,
},
};
static struct gpio_led_platform_data corgi_gpio_leds_info = {
.leds = corgi_gpio_leds,
.num_leds = ARRAY_SIZE(corgi_gpio_leds),
};
static struct platform_device corgiled_device = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &corgi_gpio_leds_info,
},
};
/*
* MMC/SD Device
*
* The card detect interrupt isn't debounced so we delay it by 250ms
* to give the card a chance to fully insert/eject.
*/
static struct pxamci_platform_data corgi_mci_platform_data = {
.detect_delay_ms = 250,
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.gpio_card_detect = CORGI_GPIO_nSD_DETECT,
.gpio_card_ro = CORGI_GPIO_nSD_WP,
.gpio_power = CORGI_GPIO_SD_PWR,
};
/*
* Irda
*/
static struct pxaficp_platform_data corgi_ficp_platform_data = {
.gpio_pwdown = CORGI_GPIO_IR_ON,
.transceiver_cap = IR_SIRMODE | IR_OFF,
};
/*
* USB Device Controller
*/
static struct pxa2xx_udc_mach_info udc_info __initdata = {
.gpio_vbus = -1,
/* no connect GPIO; corgi can't tell connection status */
.gpio_pullup = CORGI_GPIO_USB_PULLUP,
};
#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MASTER)
static struct pxa2xx_spi_master corgi_spi_info = {
.num_chipselect = 3,
};
static void corgi_wait_for_hsync(void)
{
while (gpio_get_value(CORGI_GPIO_HSYNC))
cpu_relax();
while (!gpio_get_value(CORGI_GPIO_HSYNC))
cpu_relax();
}
static struct ads7846_platform_data corgi_ads7846_info = {
.model = 7846,
.vref_delay_usecs = 100,
.x_plate_ohms = 419,
.y_plate_ohms = 486,
.gpio_pendown = CORGI_GPIO_TP_INT,
.wait_for_sync = corgi_wait_for_hsync,
};
static struct pxa2xx_spi_chip corgi_ads7846_chip = {
.gpio_cs = CORGI_GPIO_ADS7846_CS,
};
static void corgi_bl_kick_battery(void)
{
void (*kick_batt)(void);
kick_batt = symbol_get(sharpsl_battery_kick);
if (kick_batt) {
kick_batt();
symbol_put(sharpsl_battery_kick);
}
}
static struct corgi_lcd_platform_data corgi_lcdcon_info = {
.init_mode = CORGI_LCD_MODE_VGA,
.max_intensity = 0x2f,
.default_intensity = 0x1f,
.limit_mask = 0x0b,
.gpio_backlight_cont = CORGI_GPIO_BACKLIGHT_CONT,
.gpio_backlight_on = -1,
.kick_battery = corgi_bl_kick_battery,
};
static struct pxa2xx_spi_chip corgi_lcdcon_chip = {
.gpio_cs = CORGI_GPIO_LCDCON_CS,
};
static struct pxa2xx_spi_chip corgi_max1111_chip = {
.gpio_cs = CORGI_GPIO_MAX1111_CS,
};
static struct spi_board_info corgi_spi_devices[] = {
{
.modalias = "ads7846",
.max_speed_hz = 1200000,
.bus_num = 1,
.chip_select = 0,
.platform_data = &corgi_ads7846_info,
.controller_data= &corgi_ads7846_chip,
.irq = gpio_to_irq(CORGI_GPIO_TP_INT),
}, {
.modalias = "corgi-lcd",
.max_speed_hz = 50000,
.bus_num = 1,
.chip_select = 1,
.platform_data = &corgi_lcdcon_info,
.controller_data= &corgi_lcdcon_chip,
}, {
.modalias = "max1111",
.max_speed_hz = 450000,
.bus_num = 1,
.chip_select = 2,
.controller_data= &corgi_max1111_chip,
},
};
static void __init corgi_init_spi(void)
{
pxa2xx_set_spi_info(1, &corgi_spi_info);
spi_register_board_info(ARRAY_AND_SIZE(corgi_spi_devices));
}
#else
static inline void corgi_init_spi(void) {}
#endif
static struct mtd_partition sharpsl_nand_partitions[] = {
{
.name = "System Area",
.offset = 0,
.size = 7 * 1024 * 1024,
},
{
.name = "Root Filesystem",
.offset = 7 * 1024 * 1024,
.size = 25 * 1024 * 1024,
},
{
.name = "Home Filesystem",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
},
};
static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
static struct nand_bbt_descr sharpsl_bbt = {
.options = 0,
.offs = 4,
.len = 2,
.pattern = scan_ff_pattern
};
static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = {
.badblock_pattern = &sharpsl_bbt,
.partitions = sharpsl_nand_partitions,
.nr_partitions = ARRAY_SIZE(sharpsl_nand_partitions),
};
static struct resource sharpsl_nand_resources[] = {
{
.start = 0x0C000000,
.end = 0x0C000FFF,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device sharpsl_nand_device = {
.name = "sharpsl-nand",
.id = -1,
.resource = sharpsl_nand_resources,
.num_resources = ARRAY_SIZE(sharpsl_nand_resources),
.dev.platform_data = &sharpsl_nand_platform_data,
};
static struct mtd_partition sharpsl_rom_parts[] = {
{
.name ="Boot PROM Filesystem",
.offset = 0x00120000,
.size = MTDPART_SIZ_FULL,
},
};
static struct physmap_flash_data sharpsl_rom_data = {
.width = 2,
.nr_parts = ARRAY_SIZE(sharpsl_rom_parts),
.parts = sharpsl_rom_parts,
};
static struct resource sharpsl_rom_resources[] = {
{
.start = 0x00000000,
.end = 0x007fffff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device sharpsl_rom_device = {
.name = "physmap-flash",
.id = -1,
.resource = sharpsl_rom_resources,
.num_resources = ARRAY_SIZE(sharpsl_rom_resources),
.dev.platform_data = &sharpsl_rom_data,
};
static struct platform_device *devices[] __initdata = {
&corgiscoop_device,
&corgifb_device,
&corgikbd_device,
&corgiled_device,
&sharpsl_nand_device,
&sharpsl_rom_device,
};
static struct i2c_board_info __initdata corgi_i2c_devices[] = {
{ I2C_BOARD_INFO("wm8731", 0x1b) },
};
static void corgi_poweroff(void)
{
if (!machine_is_corgi())
/* Green LED off tells the bootloader to halt */
gpio_set_value(CORGI_GPIO_LED_GREEN, 0);
arm_machine_restart('h', NULL);
}
static void corgi_restart(char mode, const char *cmd)
{
if (!machine_is_corgi())
/* Green LED on tells the bootloader to reboot */
gpio_set_value(CORGI_GPIO_LED_GREEN, 1);
arm_machine_restart('h', cmd);
}
static void __init corgi_init(void)
{
pm_power_off = corgi_poweroff;
arm_pm_restart = corgi_restart;
/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
PCFR |= PCFR_OPDE;
pxa2xx_mfp_config(ARRAY_AND_SIZE(corgi_pin_config));
/* allow wakeup from various GPIOs */
gpio_set_wake(CORGI_GPIO_KEY_INT, 1);
gpio_set_wake(CORGI_GPIO_WAKEUP, 1);
gpio_set_wake(CORGI_GPIO_AC_IN, 1);
gpio_set_wake(CORGI_GPIO_CHRG_FULL, 1);
if (!machine_is_corgi())
gpio_set_wake(CORGI_GPIO_MAIN_BAT_LOW, 1);
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
corgi_init_spi();
pxa_set_udc_info(&udc_info);
pxa_set_mci_info(&corgi_mci_platform_data);
pxa_set_ficp_info(&corgi_ficp_platform_data);
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(corgi_i2c_devices));
platform_scoop_config = &corgi_pcmcia_config;
if (machine_is_husky())
sharpsl_nand_partitions[1].size = 53 * 1024 * 1024;
platform_add_devices(devices, ARRAY_SIZE(devices));
}
static void __init fixup_corgi(struct machine_desc *desc,
struct tag *tags, char **cmdline, struct meminfo *mi)
{
sharpsl_save_param();
mi->nr_banks=1;
mi->bank[0].start = 0xa0000000;
if (machine_is_corgi())
mi->bank[0].size = (32*1024*1024);
else
mi->bank[0].size = (64*1024*1024);
}
#ifdef CONFIG_MACH_CORGI
MACHINE_START(CORGI, "SHARP Corgi")
.fixup = fixup_corgi,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
MACHINE_END
#endif
#ifdef CONFIG_MACH_SHEPHERD
MACHINE_START(SHEPHERD, "SHARP Shepherd")
.fixup = fixup_corgi,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
MACHINE_END
#endif
#ifdef CONFIG_MACH_HUSKY
MACHINE_START(HUSKY, "SHARP Husky")
.fixup = fixup_corgi,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
MACHINE_END
#endif