Javier Martinez Canillas 16f1b4f0ba iio: accel: bma180: Add OF device ID table ... The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>		2017-03-19 10:55:17 +00:00
..
accel	iio: accel: bma180: Add OF device ID table	2017-03-19 10:55:17 +00:00
adc	iio: adc: ina2xx: Add OF device ID table	2017-03-19 10:47:53 +00:00
amplifiers	spi: Updates for v4.4	2015-11-05 13:15:12 -08:00
buffer	iio:buffer.h - split into buffer.h and buffer_impl.h	2017-01-10 19:54:55 +00:00
chemical	iio:chemical:atlas-ph-sensor: Fix use of 32 bit int to hold 16 bit big endian value	2016-10-23 22:18:27 +01:00
common	iio: hid: Add temperature sensor support	2017-03-04 18:45:26 +00:00
counter	iio: pc104: Mask PC/104 drivers via the PC104 Kconfig option	2017-03-15 21:59:08 +00:00
dac	iio: dac: mcp4725: Add OF device ID table	2017-03-19 10:51:04 +00:00
dummy	iio:dummy: Stop enabling timestamp by default.	2017-01-10 19:54:55 +00:00
frequency	iio: frequency: ad9523: use unsigned int rather then bare unsigned	2016-04-17 10:31:03 +01:00
gyro	iio: common: ssp_sensors: gyro: use devm_iio_device_register()	2017-01-28 12:16:17 +00:00
health	First set of IIO new device support, features and cleanup for the 4.12 cycle.	2017-03-06 13:17:21 +01:00
humidity	Merge 4.10-rc7 into staging-next	2017-02-06 09:36:10 +01:00
imu	iio: imu: inv_mpu6050: Add OF device ID table	2017-03-19 10:54:43 +00:00
light	iio: light: tsl2563: Add OF device ID table	2017-03-19 10:52:56 +00:00
magnetometer	iio: magnetometer: bmc150_magn_i2c: Add OF device ID table	2017-03-19 10:50:10 +00:00
orientation	iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver)	2016-11-05 17:47:47 +00:00
potentiometer	iio: max5481: Add support for Maxim digital potentiometers	2017-01-28 12:13:31 +00:00
potentiostat	iio: lmp91000: Set parent device	2017-02-19 12:01:52 +00:00
pressure	iio: pressure: hp03: Add OF device ID table	2017-03-19 10:53:39 +00:00
proximity	iio: pulsedlight-lidar-lite-v2: Set parent device	2017-02-19 12:02:31 +00:00
temperature	iio: mlx96014: Add OF device ID table	2017-03-19 10:49:24 +00:00
trigger	Immutable branch between MFD, IIO and PWM due for the v4.11 merge window	2017-01-28 18:21:49 +00:00
iio_core.h	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
iio_core_trigger.h
industrialio-buffer.c	sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>	2017-03-02 08:42:32 +01:00
industrialio-configfs.c	iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem	2015-12-05 16:25:30 +00:00
industrialio-core.c	iio:buffer.h - split into buffer.h and buffer_impl.h	2017-01-10 19:54:55 +00:00
industrialio-event.c	iio: iio_push_event(): Don't crash if the event interface is not registered	2016-09-10 16:40:44 +01:00
industrialio-sw-device.c	iio: Add support for creating IIO devices via configfs	2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c	iio: core: fix ptr_ret.cocci warnings	2016-01-20 17:09:18 -08:00
industrialio-trigger.c	iio: trigger: clean up viio_trigger_alloc()	2017-01-22 13:37:34 +00:00
industrialio-triggered-event.c	iio: Support triggered events	2015-08-27 20:47:09 +01:00
inkern.c	iio: inkern: pass through raw values if no scaling	2017-01-14 12:20:18 +00:00
Kconfig	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00
Makefile	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00