mirror of
https://github.com/torvalds/linux
synced 2024-10-08 04:12:40 +00:00
484468fb0f
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Acked-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230718143027.1064731-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
291 lines
8.5 KiB
C
291 lines
8.5 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* xHCI host controller driver for R-Car SoCs
|
|
*
|
|
* Copyright (C) 2014 Renesas Electronics Corporation
|
|
*/
|
|
|
|
#include <linux/firmware.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/of.h>
|
|
#include <linux/usb/phy.h>
|
|
|
|
#include "xhci.h"
|
|
#include "xhci-plat.h"
|
|
#include "xhci-rzv2m.h"
|
|
|
|
#define XHCI_RCAR_FIRMWARE_NAME_V1 "r8a779x_usb3_v1.dlmem"
|
|
#define XHCI_RCAR_FIRMWARE_NAME_V3 "r8a779x_usb3_v3.dlmem"
|
|
|
|
/*
|
|
* - The V3 firmware is for all R-Car Gen3
|
|
* - The V2 firmware is possible to use on R-Car Gen2. However, the V2 causes
|
|
* performance degradation. So, this driver continues to use the V1 if R-Car
|
|
* Gen2.
|
|
* - The V1 firmware is impossible to use on R-Car Gen3.
|
|
*/
|
|
MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V1);
|
|
MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V3);
|
|
|
|
/*** Register Offset ***/
|
|
#define RCAR_USB3_AXH_STA 0x104 /* AXI Host Control Status */
|
|
#define RCAR_USB3_INT_ENA 0x224 /* Interrupt Enable */
|
|
#define RCAR_USB3_DL_CTRL 0x250 /* FW Download Control & Status */
|
|
#define RCAR_USB3_FW_DATA0 0x258 /* FW Data0 */
|
|
|
|
#define RCAR_USB3_LCLK 0xa44 /* LCLK Select */
|
|
#define RCAR_USB3_CONF1 0xa48 /* USB3.0 Configuration1 */
|
|
#define RCAR_USB3_CONF2 0xa5c /* USB3.0 Configuration2 */
|
|
#define RCAR_USB3_CONF3 0xaa8 /* USB3.0 Configuration3 */
|
|
#define RCAR_USB3_RX_POL 0xab0 /* USB3.0 RX Polarity */
|
|
#define RCAR_USB3_TX_POL 0xab8 /* USB3.0 TX Polarity */
|
|
|
|
/*** Register Settings ***/
|
|
/* AXI Host Control Status */
|
|
#define RCAR_USB3_AXH_STA_B3_PLL_ACTIVE 0x00010000
|
|
#define RCAR_USB3_AXH_STA_B2_PLL_ACTIVE 0x00000001
|
|
#define RCAR_USB3_AXH_STA_PLL_ACTIVE_MASK (RCAR_USB3_AXH_STA_B3_PLL_ACTIVE | \
|
|
RCAR_USB3_AXH_STA_B2_PLL_ACTIVE)
|
|
|
|
/* Interrupt Enable */
|
|
#define RCAR_USB3_INT_XHC_ENA 0x00000001
|
|
#define RCAR_USB3_INT_PME_ENA 0x00000002
|
|
#define RCAR_USB3_INT_HSE_ENA 0x00000004
|
|
#define RCAR_USB3_INT_ENA_VAL (RCAR_USB3_INT_XHC_ENA | \
|
|
RCAR_USB3_INT_PME_ENA | RCAR_USB3_INT_HSE_ENA)
|
|
|
|
/* FW Download Control & Status */
|
|
#define RCAR_USB3_DL_CTRL_ENABLE 0x00000001
|
|
#define RCAR_USB3_DL_CTRL_FW_SUCCESS 0x00000010
|
|
#define RCAR_USB3_DL_CTRL_FW_SET_DATA0 0x00000100
|
|
|
|
/* LCLK Select */
|
|
#define RCAR_USB3_LCLK_ENA_VAL 0x01030001
|
|
|
|
/* USB3.0 Configuration */
|
|
#define RCAR_USB3_CONF1_VAL 0x00030204
|
|
#define RCAR_USB3_CONF2_VAL 0x00030300
|
|
#define RCAR_USB3_CONF3_VAL 0x13802007
|
|
|
|
/* USB3.0 Polarity */
|
|
#define RCAR_USB3_RX_POL_VAL BIT(21)
|
|
#define RCAR_USB3_TX_POL_VAL BIT(4)
|
|
|
|
static void xhci_rcar_start_gen2(struct usb_hcd *hcd)
|
|
{
|
|
/* LCLK Select */
|
|
writel(RCAR_USB3_LCLK_ENA_VAL, hcd->regs + RCAR_USB3_LCLK);
|
|
/* USB3.0 Configuration */
|
|
writel(RCAR_USB3_CONF1_VAL, hcd->regs + RCAR_USB3_CONF1);
|
|
writel(RCAR_USB3_CONF2_VAL, hcd->regs + RCAR_USB3_CONF2);
|
|
writel(RCAR_USB3_CONF3_VAL, hcd->regs + RCAR_USB3_CONF3);
|
|
/* USB3.0 Polarity */
|
|
writel(RCAR_USB3_RX_POL_VAL, hcd->regs + RCAR_USB3_RX_POL);
|
|
writel(RCAR_USB3_TX_POL_VAL, hcd->regs + RCAR_USB3_TX_POL);
|
|
}
|
|
|
|
static int xhci_rcar_is_gen2(struct device *dev)
|
|
{
|
|
struct device_node *node = dev->of_node;
|
|
|
|
return of_device_is_compatible(node, "renesas,xhci-r8a7790") ||
|
|
of_device_is_compatible(node, "renesas,xhci-r8a7791") ||
|
|
of_device_is_compatible(node, "renesas,xhci-r8a7793") ||
|
|
of_device_is_compatible(node, "renesas,rcar-gen2-xhci");
|
|
}
|
|
|
|
static void xhci_rcar_start(struct usb_hcd *hcd)
|
|
{
|
|
u32 temp;
|
|
|
|
if (hcd->regs != NULL) {
|
|
/* Interrupt Enable */
|
|
temp = readl(hcd->regs + RCAR_USB3_INT_ENA);
|
|
temp |= RCAR_USB3_INT_ENA_VAL;
|
|
writel(temp, hcd->regs + RCAR_USB3_INT_ENA);
|
|
if (xhci_rcar_is_gen2(hcd->self.controller))
|
|
xhci_rcar_start_gen2(hcd);
|
|
}
|
|
}
|
|
|
|
static int xhci_rcar_download_firmware(struct usb_hcd *hcd)
|
|
{
|
|
struct device *dev = hcd->self.controller;
|
|
void __iomem *regs = hcd->regs;
|
|
struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
|
|
const struct firmware *fw;
|
|
int retval, index, j;
|
|
u32 data, val, temp;
|
|
|
|
/*
|
|
* According to the datasheet, "Upon the completion of FW Download,
|
|
* there is no need to write or reload FW".
|
|
*/
|
|
if (readl(regs + RCAR_USB3_DL_CTRL) & RCAR_USB3_DL_CTRL_FW_SUCCESS)
|
|
return 0;
|
|
|
|
/* request R-Car USB3.0 firmware */
|
|
retval = request_firmware(&fw, priv->firmware_name, dev);
|
|
if (retval)
|
|
return retval;
|
|
|
|
/* download R-Car USB3.0 firmware */
|
|
temp = readl(regs + RCAR_USB3_DL_CTRL);
|
|
temp |= RCAR_USB3_DL_CTRL_ENABLE;
|
|
writel(temp, regs + RCAR_USB3_DL_CTRL);
|
|
|
|
for (index = 0; index < fw->size; index += 4) {
|
|
/* to avoid reading beyond the end of the buffer */
|
|
for (data = 0, j = 3; j >= 0; j--) {
|
|
if ((j + index) < fw->size)
|
|
data |= fw->data[index + j] << (8 * j);
|
|
}
|
|
writel(data, regs + RCAR_USB3_FW_DATA0);
|
|
temp = readl(regs + RCAR_USB3_DL_CTRL);
|
|
temp |= RCAR_USB3_DL_CTRL_FW_SET_DATA0;
|
|
writel(temp, regs + RCAR_USB3_DL_CTRL);
|
|
|
|
retval = readl_poll_timeout_atomic(regs + RCAR_USB3_DL_CTRL,
|
|
val, !(val & RCAR_USB3_DL_CTRL_FW_SET_DATA0),
|
|
1, 10000);
|
|
if (retval < 0)
|
|
break;
|
|
}
|
|
|
|
temp = readl(regs + RCAR_USB3_DL_CTRL);
|
|
temp &= ~RCAR_USB3_DL_CTRL_ENABLE;
|
|
writel(temp, regs + RCAR_USB3_DL_CTRL);
|
|
|
|
retval = readl_poll_timeout_atomic((regs + RCAR_USB3_DL_CTRL),
|
|
val, val & RCAR_USB3_DL_CTRL_FW_SUCCESS, 1, 10000);
|
|
|
|
release_firmware(fw);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static bool xhci_rcar_wait_for_pll_active(struct usb_hcd *hcd)
|
|
{
|
|
int retval;
|
|
u32 val, mask = RCAR_USB3_AXH_STA_PLL_ACTIVE_MASK;
|
|
|
|
retval = readl_poll_timeout_atomic(hcd->regs + RCAR_USB3_AXH_STA,
|
|
val, (val & mask) == mask, 1, 1000);
|
|
return !retval;
|
|
}
|
|
|
|
/* This function needs to initialize a "phy" of usb before */
|
|
static int xhci_rcar_init_quirk(struct usb_hcd *hcd)
|
|
{
|
|
/* If hcd->regs is NULL, we don't just call the following function */
|
|
if (!hcd->regs)
|
|
return 0;
|
|
|
|
if (!xhci_rcar_wait_for_pll_active(hcd))
|
|
return -ETIMEDOUT;
|
|
|
|
return xhci_rcar_download_firmware(hcd);
|
|
}
|
|
|
|
static int xhci_rcar_resume_quirk(struct usb_hcd *hcd)
|
|
{
|
|
int ret;
|
|
|
|
ret = xhci_rcar_download_firmware(hcd);
|
|
if (!ret)
|
|
xhci_rcar_start(hcd);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* On R-Car Gen2 and Gen3, the AC64 bit (bit 0) of HCCPARAMS1 is set
|
|
* to 1. However, these SoCs don't support 64-bit address memory
|
|
* pointers. So, this driver clears the AC64 bit of xhci->hcc_params
|
|
* to call dma_set_coherent_mask(dev, DMA_BIT_MASK(32)) in
|
|
* xhci_gen_setup() by using the XHCI_NO_64BIT_SUPPORT quirk.
|
|
*
|
|
* And, since the firmware/internal CPU control the USBSTS.STS_HALT
|
|
* and the process speed is down when the roothub port enters U3,
|
|
* long delay for the handshake of STS_HALT is neeed in xhci_suspend()
|
|
* by using the XHCI_SLOW_SUSPEND quirk.
|
|
*/
|
|
#define SET_XHCI_PLAT_PRIV_FOR_RCAR(firmware) \
|
|
.firmware_name = firmware, \
|
|
.quirks = XHCI_NO_64BIT_SUPPORT | XHCI_TRUST_TX_LENGTH | \
|
|
XHCI_SLOW_SUSPEND, \
|
|
.init_quirk = xhci_rcar_init_quirk, \
|
|
.plat_start = xhci_rcar_start, \
|
|
.resume_quirk = xhci_rcar_resume_quirk,
|
|
|
|
static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen2 = {
|
|
SET_XHCI_PLAT_PRIV_FOR_RCAR(XHCI_RCAR_FIRMWARE_NAME_V1)
|
|
};
|
|
|
|
static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen3 = {
|
|
SET_XHCI_PLAT_PRIV_FOR_RCAR(XHCI_RCAR_FIRMWARE_NAME_V3)
|
|
};
|
|
|
|
static const struct xhci_plat_priv xhci_plat_renesas_rzv2m = {
|
|
.quirks = XHCI_NO_64BIT_SUPPORT | XHCI_TRUST_TX_LENGTH |
|
|
XHCI_SLOW_SUSPEND,
|
|
.init_quirk = xhci_rzv2m_init_quirk,
|
|
.plat_start = xhci_rzv2m_start,
|
|
};
|
|
|
|
static const struct of_device_id usb_xhci_of_match[] = {
|
|
{
|
|
.compatible = "renesas,xhci-r8a7790",
|
|
.data = &xhci_plat_renesas_rcar_gen2,
|
|
}, {
|
|
.compatible = "renesas,xhci-r8a7791",
|
|
.data = &xhci_plat_renesas_rcar_gen2,
|
|
}, {
|
|
.compatible = "renesas,xhci-r8a7793",
|
|
.data = &xhci_plat_renesas_rcar_gen2,
|
|
}, {
|
|
.compatible = "renesas,xhci-r8a7795",
|
|
.data = &xhci_plat_renesas_rcar_gen3,
|
|
}, {
|
|
.compatible = "renesas,xhci-r8a7796",
|
|
.data = &xhci_plat_renesas_rcar_gen3,
|
|
}, {
|
|
.compatible = "renesas,rcar-gen2-xhci",
|
|
.data = &xhci_plat_renesas_rcar_gen2,
|
|
}, {
|
|
.compatible = "renesas,rcar-gen3-xhci",
|
|
.data = &xhci_plat_renesas_rcar_gen3,
|
|
}, {
|
|
.compatible = "renesas,rzv2m-xhci",
|
|
.data = &xhci_plat_renesas_rzv2m,
|
|
},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, usb_xhci_of_match);
|
|
|
|
static int xhci_renesas_probe(struct platform_device *pdev)
|
|
{
|
|
const struct xhci_plat_priv *priv_match;
|
|
|
|
priv_match = of_device_get_match_data(&pdev->dev);
|
|
|
|
return xhci_plat_probe(pdev, NULL, priv_match);
|
|
}
|
|
|
|
static struct platform_driver usb_xhci_renesas_driver = {
|
|
.probe = xhci_renesas_probe,
|
|
.remove_new = xhci_plat_remove,
|
|
.shutdown = usb_hcd_platform_shutdown,
|
|
.driver = {
|
|
.name = "xhci-renesas-hcd",
|
|
.pm = &xhci_plat_pm_ops,
|
|
.of_match_table = usb_xhci_of_match,
|
|
},
|
|
};
|
|
module_platform_driver(usb_xhci_renesas_driver);
|
|
|
|
MODULE_DESCRIPTION("xHCI Platform Host Controller Driver for Renesas R-Car and RZ");
|
|
MODULE_LICENSE("GPL");
|