linux/drivers/iio/gyro/ssp_gyro_sensor.c
Alexandru Ardelean 17395ce299 iio: make use of devm_iio_kfifo_buffer_setup() helper
All drivers that already call devm_iio_kfifo_allocate() &
iio_device_attach_buffer() are simple to convert to
iio_device_attach_kfifo_buffer() in a single go.

This change does that; the unwind order is preserved.
What is important, is that the devm_iio_kfifo_buffer_setup() be called
after the indio_dev->modes is assigned, to make sure that
INDIO_BUFFER_SOFTWARE flag is set and not overridden by the assignment to
indio_dev->modes.

Also, the INDIO_BUFFER_SOFTWARE has been removed from the assignments of
'indio_dev->modes' because it is set by devm_iio_kfifo_buffer_setup().

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>x
Link: https://lore.kernel.org/r/20210215104043.91251-4-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-11 20:47:01 +00:00

145 lines
3.6 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2014, Samsung Electronics Co. Ltd. All Rights Reserved.
*/
#include <linux/iio/common/ssp_sensors.h>
#include <linux/iio/iio.h>
#include <linux/iio/buffer.h>
#include <linux/iio/kfifo_buf.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include "../common/ssp_sensors/ssp_iio_sensor.h"
#define SSP_CHANNEL_COUNT 3
#define SSP_GYROSCOPE_NAME "ssp-gyroscope"
static const char ssp_gyro_name[] = SSP_GYROSCOPE_NAME;
enum ssp_gyro_3d_channel {
SSP_CHANNEL_SCAN_INDEX_X,
SSP_CHANNEL_SCAN_INDEX_Y,
SSP_CHANNEL_SCAN_INDEX_Z,
SSP_CHANNEL_SCAN_INDEX_TIME,
};
static int ssp_gyro_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val,
int *val2, long mask)
{
u32 t;
struct ssp_data *data = dev_get_drvdata(indio_dev->dev.parent->parent);
switch (mask) {
case IIO_CHAN_INFO_SAMP_FREQ:
t = ssp_get_sensor_delay(data, SSP_GYROSCOPE_SENSOR);
ssp_convert_to_freq(t, val, val2);
return IIO_VAL_INT_PLUS_MICRO;
default:
break;
}
return -EINVAL;
}
static int ssp_gyro_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int val,
int val2, long mask)
{
int ret;
struct ssp_data *data = dev_get_drvdata(indio_dev->dev.parent->parent);
switch (mask) {
case IIO_CHAN_INFO_SAMP_FREQ:
ret = ssp_convert_to_time(val, val2);
ret = ssp_change_delay(data, SSP_GYROSCOPE_SENSOR, ret);
if (ret < 0)
dev_err(&indio_dev->dev, "gyro sensor enable fail\n");
return ret;
default:
break;
}
return -EINVAL;
}
static const struct iio_info ssp_gyro_iio_info = {
.read_raw = &ssp_gyro_read_raw,
.write_raw = &ssp_gyro_write_raw,
};
static const unsigned long ssp_gyro_scan_mask[] = { 0x07, 0, };
static const struct iio_chan_spec ssp_gyro_channels[] = {
SSP_CHANNEL_AG(IIO_ANGL_VEL, IIO_MOD_X, SSP_CHANNEL_SCAN_INDEX_X),
SSP_CHANNEL_AG(IIO_ANGL_VEL, IIO_MOD_Y, SSP_CHANNEL_SCAN_INDEX_Y),
SSP_CHANNEL_AG(IIO_ANGL_VEL, IIO_MOD_Z, SSP_CHANNEL_SCAN_INDEX_Z),
SSP_CHAN_TIMESTAMP(SSP_CHANNEL_SCAN_INDEX_TIME),
};
static int ssp_process_gyro_data(struct iio_dev *indio_dev, void *buf,
int64_t timestamp)
{
return ssp_common_process_data(indio_dev, buf, SSP_GYROSCOPE_SIZE,
timestamp);
}
static const struct iio_buffer_setup_ops ssp_gyro_buffer_ops = {
.postenable = &ssp_common_buffer_postenable,
.postdisable = &ssp_common_buffer_postdisable,
};
static int ssp_gyro_probe(struct platform_device *pdev)
{
int ret;
struct iio_dev *indio_dev;
struct ssp_sensor_data *spd;
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*spd));
if (!indio_dev)
return -ENOMEM;
spd = iio_priv(indio_dev);
spd->process_data = ssp_process_gyro_data;
spd->type = SSP_GYROSCOPE_SENSOR;
indio_dev->name = ssp_gyro_name;
indio_dev->info = &ssp_gyro_iio_info;
indio_dev->channels = ssp_gyro_channels;
indio_dev->num_channels = ARRAY_SIZE(ssp_gyro_channels);
indio_dev->available_scan_masks = ssp_gyro_scan_mask;
ret = devm_iio_kfifo_buffer_setup(&pdev->dev, indio_dev,
INDIO_BUFFER_SOFTWARE,
&ssp_gyro_buffer_ops);
if (ret)
return ret;
platform_set_drvdata(pdev, indio_dev);
ret = devm_iio_device_register(&pdev->dev, indio_dev);
if (ret < 0)
return ret;
/* ssp registering should be done after all iio setup */
ssp_register_consumer(indio_dev, SSP_GYROSCOPE_SENSOR);
return 0;
}
static struct platform_driver ssp_gyro_driver = {
.driver = {
.name = SSP_GYROSCOPE_NAME,
},
.probe = ssp_gyro_probe,
};
module_platform_driver(ssp_gyro_driver);
MODULE_AUTHOR("Karol Wrona <k.wrona@samsung.com>");
MODULE_DESCRIPTION("Samsung sensorhub gyroscopes driver");
MODULE_LICENSE("GPL");