linux/drivers/s390/block/dasd_3990_erp.c
Geert Uytterhoeven 816dddc3c8 s390/dasd: Fix comment spelling
Fix misspelling of "configuration".

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-03-17 20:50:19 +01:00

2855 lines
71 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Author(s)......: Horst Hummel <Horst.Hummel@de.ibm.com>
* Holger Smolinski <Holger.Smolinski@de.ibm.com>
* Bugreports.to..: <Linux390@de.ibm.com>
* Copyright IBM Corp. 2000, 2001
*
*/
#define KMSG_COMPONENT "dasd-eckd"
#include <linux/timer.h>
#include <asm/idals.h>
#define PRINTK_HEADER "dasd_erp(3990): "
#include "dasd_int.h"
#include "dasd_eckd.h"
struct DCTL_data {
unsigned char subcommand; /* e.g Inhibit Write, Enable Write,... */
unsigned char modifier; /* Subcommand modifier */
unsigned short res; /* reserved */
} __attribute__ ((packed));
/*
*****************************************************************************
* SECTION ERP HANDLING
*****************************************************************************
*/
/*
*****************************************************************************
* 24 and 32 byte sense ERP functions
*****************************************************************************
*/
/*
* DASD_3990_ERP_CLEANUP
*
* DESCRIPTION
* Removes the already build but not necessary ERP request and sets
* the status of the original cqr / erp to the given (final) status
*
* PARAMETER
* erp request to be blocked
* final_status either DASD_CQR_DONE or DASD_CQR_FAILED
*
* RETURN VALUES
* cqr original cqr
*/
static struct dasd_ccw_req *
dasd_3990_erp_cleanup(struct dasd_ccw_req * erp, char final_status)
{
struct dasd_ccw_req *cqr = erp->refers;
dasd_free_erp_request(erp, erp->memdev);
cqr->status = final_status;
return cqr;
} /* end dasd_3990_erp_cleanup */
/*
* DASD_3990_ERP_BLOCK_QUEUE
*
* DESCRIPTION
* Block the given device request queue to prevent from further
* processing until the started timer has expired or an related
* interrupt was received.
*/
static void dasd_3990_erp_block_queue(struct dasd_ccw_req *erp, int expires)
{
struct dasd_device *device = erp->startdev;
unsigned long flags;
DBF_DEV_EVENT(DBF_INFO, device,
"blocking request queue for %is", expires/HZ);
spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags);
dasd_device_set_stop_bits(device, DASD_STOPPED_PENDING);
spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags);
erp->status = DASD_CQR_FILLED;
if (erp->block)
dasd_block_set_timer(erp->block, expires);
else
dasd_device_set_timer(device, expires);
}
/*
* DASD_3990_ERP_INT_REQ
*
* DESCRIPTION
* Handles 'Intervention Required' error.
* This means either device offline or not installed.
*
* PARAMETER
* erp current erp
* RETURN VALUES
* erp modified erp
*/
static struct dasd_ccw_req *
dasd_3990_erp_int_req(struct dasd_ccw_req * erp)
{
struct dasd_device *device = erp->startdev;
/* first time set initial retry counter and erp_function */
/* and retry once without blocking queue */
/* (this enables easier enqueing of the cqr) */
if (erp->function != dasd_3990_erp_int_req) {
erp->retries = 256;
erp->function = dasd_3990_erp_int_req;
} else {
/* issue a message and wait for 'device ready' interrupt */
dev_err(&device->cdev->dev,
"is offline or not installed - "
"INTERVENTION REQUIRED!!\n");
dasd_3990_erp_block_queue(erp, 60*HZ);
}
return erp;
} /* end dasd_3990_erp_int_req */
/*
* DASD_3990_ERP_ALTERNATE_PATH
*
* DESCRIPTION
* Repeat the operation on a different channel path.
* If all alternate paths have been tried, the request is posted with a
* permanent error.
*
* PARAMETER
* erp pointer to the current ERP
*
* RETURN VALUES
* erp modified pointer to the ERP
*/
static void
dasd_3990_erp_alternate_path(struct dasd_ccw_req * erp)
{
struct dasd_device *device = erp->startdev;
__u8 opm;
unsigned long flags;
/* try alternate valid path */
spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags);
opm = ccw_device_get_path_mask(device->cdev);
spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags);
if (erp->lpm == 0)
erp->lpm = dasd_path_get_opm(device) &
~(erp->irb.esw.esw0.sublog.lpum);
else
erp->lpm &= ~(erp->irb.esw.esw0.sublog.lpum);
if ((erp->lpm & opm) != 0x00) {
DBF_DEV_EVENT(DBF_WARNING, device,
"try alternate lpm=%x (lpum=%x / opm=%x)",
erp->lpm, erp->irb.esw.esw0.sublog.lpum, opm);
/* reset status to submit the request again... */
erp->status = DASD_CQR_FILLED;
erp->retries = 10;
} else {
dev_err(&device->cdev->dev,
"The DASD cannot be reached on any path (lpum=%x"
"/opm=%x)\n", erp->irb.esw.esw0.sublog.lpum, opm);
/* post request with permanent error */
erp->status = DASD_CQR_FAILED;
}
} /* end dasd_3990_erp_alternate_path */
/*
* DASD_3990_ERP_DCTL
*
* DESCRIPTION
* Setup cqr to do the Diagnostic Control (DCTL) command with an
* Inhibit Write subcommand (0x20) and the given modifier.
*
* PARAMETER
* erp pointer to the current (failed) ERP
* modifier subcommand modifier
*
* RETURN VALUES
* dctl_cqr pointer to NEW dctl_cqr
*
*/
static struct dasd_ccw_req *
dasd_3990_erp_DCTL(struct dasd_ccw_req * erp, char modifier)
{
struct dasd_device *device = erp->startdev;
struct DCTL_data *DCTL_data;
struct ccw1 *ccw;
struct dasd_ccw_req *dctl_cqr;
dctl_cqr = dasd_alloc_erp_request((char *) &erp->magic, 1,
sizeof(struct DCTL_data),
device);
if (IS_ERR(dctl_cqr)) {
dev_err(&device->cdev->dev,
"Unable to allocate DCTL-CQR\n");
erp->status = DASD_CQR_FAILED;
return erp;
}
DCTL_data = dctl_cqr->data;
DCTL_data->subcommand = 0x02; /* Inhibit Write */
DCTL_data->modifier = modifier;
ccw = dctl_cqr->cpaddr;
memset(ccw, 0, sizeof(struct ccw1));
ccw->cmd_code = CCW_CMD_DCTL;
ccw->count = 4;
ccw->cda = (__u32)(addr_t) DCTL_data;
dctl_cqr->flags = erp->flags;
dctl_cqr->function = dasd_3990_erp_DCTL;
dctl_cqr->refers = erp;
dctl_cqr->startdev = device;
dctl_cqr->memdev = device;
dctl_cqr->magic = erp->magic;
dctl_cqr->expires = 5 * 60 * HZ;
dctl_cqr->retries = 2;
dctl_cqr->buildclk = get_tod_clock();
dctl_cqr->status = DASD_CQR_FILLED;
return dctl_cqr;
} /* end dasd_3990_erp_DCTL */
/*
* DASD_3990_ERP_ACTION_1
*
* DESCRIPTION
* Setup ERP to do the ERP action 1 (see Reference manual).
* Repeat the operation on a different channel path.
* As deviation from the recommended recovery action, we reset the path mask
* after we have tried each path and go through all paths a second time.
* This will cover situations where only one path at a time is actually down,
* but all paths fail and recover just with the same sequence and timing as
* we try to use them (flapping links).
* If all alternate paths have been tried twice, the request is posted with
* a permanent error.
*
* PARAMETER
* erp pointer to the current ERP
*
* RETURN VALUES
* erp pointer to the ERP
*
*/
static struct dasd_ccw_req *dasd_3990_erp_action_1_sec(struct dasd_ccw_req *erp)
{
erp->function = dasd_3990_erp_action_1_sec;
dasd_3990_erp_alternate_path(erp);
return erp;
}
static struct dasd_ccw_req *dasd_3990_erp_action_1(struct dasd_ccw_req *erp)
{
erp->function = dasd_3990_erp_action_1;
dasd_3990_erp_alternate_path(erp);
if (erp->status == DASD_CQR_FAILED &&
!test_bit(DASD_CQR_VERIFY_PATH, &erp->flags)) {
erp->status = DASD_CQR_FILLED;
erp->retries = 10;
erp->lpm = dasd_path_get_opm(erp->startdev);
erp->function = dasd_3990_erp_action_1_sec;
}
return erp;
} /* end dasd_3990_erp_action_1(b) */
/*
* DASD_3990_ERP_ACTION_4
*
* DESCRIPTION
* Setup ERP to do the ERP action 4 (see Reference manual).
* Set the current request to PENDING to block the CQR queue for that device
* until the state change interrupt appears.
* Use a timer (20 seconds) to retry the cqr if the interrupt is still
* missing.
*
* PARAMETER
* sense sense data of the actual error
* erp pointer to the current ERP
*
* RETURN VALUES
* erp pointer to the ERP
*
*/
static struct dasd_ccw_req *
dasd_3990_erp_action_4(struct dasd_ccw_req * erp, char *sense)
{
struct dasd_device *device = erp->startdev;
/* first time set initial retry counter and erp_function */
/* and retry once without waiting for state change pending */
/* interrupt (this enables easier enqueing of the cqr) */
if (erp->function != dasd_3990_erp_action_4) {
DBF_DEV_EVENT(DBF_INFO, device, "%s",
"dasd_3990_erp_action_4: first time retry");
erp->retries = 256;
erp->function = dasd_3990_erp_action_4;
} else {
if (sense && (sense[25] == 0x1D)) { /* state change pending */
DBF_DEV_EVENT(DBF_INFO, device,
"waiting for state change pending "
"interrupt, %d retries left",
erp->retries);
dasd_3990_erp_block_queue(erp, 30*HZ);
} else if (sense && (sense[25] == 0x1E)) { /* busy */
DBF_DEV_EVENT(DBF_INFO, device,
"busy - redriving request later, "
"%d retries left",
erp->retries);
dasd_3990_erp_block_queue(erp, HZ);
} else {
/* no state change pending - retry */
DBF_DEV_EVENT(DBF_INFO, device,
"redriving request immediately, "
"%d retries left",
erp->retries);
erp->status = DASD_CQR_FILLED;
}
}
return erp;
} /* end dasd_3990_erp_action_4 */
/*
*****************************************************************************
* 24 byte sense ERP functions (only)
*****************************************************************************
*/
/*
* DASD_3990_ERP_ACTION_5
*
* DESCRIPTION
* Setup ERP to do the ERP action 5 (see Reference manual).
* NOTE: Further handling is done in xxx_further_erp after the retries.
*
* PARAMETER
* erp pointer to the current ERP
*
* RETURN VALUES
* erp pointer to the ERP
*
*/
static struct dasd_ccw_req *
dasd_3990_erp_action_5(struct dasd_ccw_req * erp)
{
/* first of all retry */
erp->retries = 10;
erp->function = dasd_3990_erp_action_5;
return erp;
} /* end dasd_3990_erp_action_5 */
/*
* DASD_3990_HANDLE_ENV_DATA
*
* DESCRIPTION
* Handles 24 byte 'Environmental data present'.
* Does a analysis of the sense data (message Format)
* and prints the error messages.
*
* PARAMETER
* sense current sense data
*
* RETURN VALUES
* void
*/
static void
dasd_3990_handle_env_data(struct dasd_ccw_req * erp, char *sense)
{
struct dasd_device *device = erp->startdev;
char msg_format = (sense[7] & 0xF0);
char msg_no = (sense[7] & 0x0F);
char errorstring[ERRORLENGTH];
switch (msg_format) {
case 0x00: /* Format 0 - Program or System Checks */
if (sense[1] & 0x10) { /* check message to operator bit */
switch (msg_no) {
case 0x00: /* No Message */
break;
case 0x01:
dev_warn(&device->cdev->dev,
"FORMAT 0 - Invalid Command\n");
break;
case 0x02:
dev_warn(&device->cdev->dev,
"FORMAT 0 - Invalid Command "
"Sequence\n");
break;
case 0x03:
dev_warn(&device->cdev->dev,
"FORMAT 0 - CCW Count less than "
"required\n");
break;
case 0x04:
dev_warn(&device->cdev->dev,
"FORMAT 0 - Invalid Parameter\n");
break;
case 0x05:
dev_warn(&device->cdev->dev,
"FORMAT 0 - Diagnostic of Special"
" Command Violates File Mask\n");
break;
case 0x07:
dev_warn(&device->cdev->dev,
"FORMAT 0 - Channel Returned with "
"Incorrect retry CCW\n");
break;
case 0x08:
dev_warn(&device->cdev->dev,
"FORMAT 0 - Reset Notification\n");
break;
case 0x09:
dev_warn(&device->cdev->dev,
"FORMAT 0 - Storage Path Restart\n");
break;
case 0x0A:
dev_warn(&device->cdev->dev,
"FORMAT 0 - Channel requested "
"... %02x\n", sense[8]);
break;
case 0x0B:
dev_warn(&device->cdev->dev,
"FORMAT 0 - Invalid Defective/"
"Alternate Track Pointer\n");
break;
case 0x0C:
dev_warn(&device->cdev->dev,
"FORMAT 0 - DPS Installation "
"Check\n");
break;
case 0x0E:
dev_warn(&device->cdev->dev,
"FORMAT 0 - Command Invalid on "
"Secondary Address\n");
break;
case 0x0F:
dev_warn(&device->cdev->dev,
"FORMAT 0 - Status Not As "
"Required: reason %02x\n",
sense[8]);
break;
default:
dev_warn(&device->cdev->dev,
"FORMAT 0 - Reserved\n");
}
} else {
switch (msg_no) {
case 0x00: /* No Message */
break;
case 0x01:
dev_warn(&device->cdev->dev,
"FORMAT 0 - Device Error "
"Source\n");
break;
case 0x02:
dev_warn(&device->cdev->dev,
"FORMAT 0 - Reserved\n");
break;
case 0x03:
dev_warn(&device->cdev->dev,
"FORMAT 0 - Device Fenced - "
"device = %02x\n", sense[4]);
break;
case 0x04:
dev_warn(&device->cdev->dev,
"FORMAT 0 - Data Pinned for "
"Device\n");
break;
default:
dev_warn(&device->cdev->dev,
"FORMAT 0 - Reserved\n");
}
}
break;
case 0x10: /* Format 1 - Device Equipment Checks */
switch (msg_no) {
case 0x00: /* No Message */
break;
case 0x01:
dev_warn(&device->cdev->dev,
"FORMAT 1 - Device Status 1 not as "
"expected\n");
break;
case 0x03:
dev_warn(&device->cdev->dev,
"FORMAT 1 - Index missing\n");
break;
case 0x04:
dev_warn(&device->cdev->dev,
"FORMAT 1 - Interruption cannot be "
"reset\n");
break;
case 0x05:
dev_warn(&device->cdev->dev,
"FORMAT 1 - Device did not respond to "
"selection\n");
break;
case 0x06:
dev_warn(&device->cdev->dev,
"FORMAT 1 - Device check-2 error or Set "
"Sector is not complete\n");
break;
case 0x07:
dev_warn(&device->cdev->dev,
"FORMAT 1 - Head address does not "
"compare\n");
break;
case 0x08:
dev_warn(&device->cdev->dev,
"FORMAT 1 - Device status 1 not valid\n");
break;
case 0x09:
dev_warn(&device->cdev->dev,
"FORMAT 1 - Device not ready\n");
break;
case 0x0A:
dev_warn(&device->cdev->dev,
"FORMAT 1 - Track physical address did "
"not compare\n");
break;
case 0x0B:
dev_warn(&device->cdev->dev,
"FORMAT 1 - Missing device address bit\n");
break;
case 0x0C:
dev_warn(&device->cdev->dev,
"FORMAT 1 - Drive motor switch is off\n");
break;
case 0x0D:
dev_warn(&device->cdev->dev,
"FORMAT 1 - Seek incomplete\n");
break;
case 0x0E:
dev_warn(&device->cdev->dev,
"FORMAT 1 - Cylinder address did not "
"compare\n");
break;
case 0x0F:
dev_warn(&device->cdev->dev,
"FORMAT 1 - Offset active cannot be "
"reset\n");
break;
default:
dev_warn(&device->cdev->dev,
"FORMAT 1 - Reserved\n");
}
break;
case 0x20: /* Format 2 - 3990 Equipment Checks */
switch (msg_no) {
case 0x08:
dev_warn(&device->cdev->dev,
"FORMAT 2 - 3990 check-2 error\n");
break;
case 0x0E:
dev_warn(&device->cdev->dev,
"FORMAT 2 - Support facility errors\n");
break;
case 0x0F:
dev_warn(&device->cdev->dev,
"FORMAT 2 - Microcode detected error "
"%02x\n",
sense[8]);
break;
default:
dev_warn(&device->cdev->dev,
"FORMAT 2 - Reserved\n");
}
break;
case 0x30: /* Format 3 - 3990 Control Checks */
switch (msg_no) {
case 0x0F:
dev_warn(&device->cdev->dev,
"FORMAT 3 - Allegiance terminated\n");
break;
default:
dev_warn(&device->cdev->dev,
"FORMAT 3 - Reserved\n");
}
break;
case 0x40: /* Format 4 - Data Checks */
switch (msg_no) {
case 0x00:
dev_warn(&device->cdev->dev,
"FORMAT 4 - Home address area error\n");
break;
case 0x01:
dev_warn(&device->cdev->dev,
"FORMAT 4 - Count area error\n");
break;
case 0x02:
dev_warn(&device->cdev->dev,
"FORMAT 4 - Key area error\n");
break;
case 0x03:
dev_warn(&device->cdev->dev,
"FORMAT 4 - Data area error\n");
break;
case 0x04:
dev_warn(&device->cdev->dev,
"FORMAT 4 - No sync byte in home address "
"area\n");
break;
case 0x05:
dev_warn(&device->cdev->dev,
"FORMAT 4 - No sync byte in count address "
"area\n");
break;
case 0x06:
dev_warn(&device->cdev->dev,
"FORMAT 4 - No sync byte in key area\n");
break;
case 0x07:
dev_warn(&device->cdev->dev,
"FORMAT 4 - No sync byte in data area\n");
break;
case 0x08:
dev_warn(&device->cdev->dev,
"FORMAT 4 - Home address area error; "
"offset active\n");
break;
case 0x09:
dev_warn(&device->cdev->dev,
"FORMAT 4 - Count area error; offset "
"active\n");
break;
case 0x0A:
dev_warn(&device->cdev->dev,
"FORMAT 4 - Key area error; offset "
"active\n");
break;
case 0x0B:
dev_warn(&device->cdev->dev,
"FORMAT 4 - Data area error; "
"offset active\n");
break;
case 0x0C:
dev_warn(&device->cdev->dev,
"FORMAT 4 - No sync byte in home "
"address area; offset active\n");
break;
case 0x0D:
dev_warn(&device->cdev->dev,
"FORMAT 4 - No sync byte in count "
"address area; offset active\n");
break;
case 0x0E:
dev_warn(&device->cdev->dev,
"FORMAT 4 - No sync byte in key area; "
"offset active\n");
break;
case 0x0F:
dev_warn(&device->cdev->dev,
"FORMAT 4 - No sync byte in data area; "
"offset active\n");
break;
default:
dev_warn(&device->cdev->dev,
"FORMAT 4 - Reserved\n");
}
break;
case 0x50: /* Format 5 - Data Check with displacement information */
switch (msg_no) {
case 0x00:
dev_warn(&device->cdev->dev,
"FORMAT 5 - Data Check in the "
"home address area\n");
break;
case 0x01:
dev_warn(&device->cdev->dev,
"FORMAT 5 - Data Check in the count "
"area\n");
break;
case 0x02:
dev_warn(&device->cdev->dev,
"FORMAT 5 - Data Check in the key area\n");
break;
case 0x03:
dev_warn(&device->cdev->dev,
"FORMAT 5 - Data Check in the data "
"area\n");
break;
case 0x08:
dev_warn(&device->cdev->dev,
"FORMAT 5 - Data Check in the "
"home address area; offset active\n");
break;
case 0x09:
dev_warn(&device->cdev->dev,
"FORMAT 5 - Data Check in the count area; "
"offset active\n");
break;
case 0x0A:
dev_warn(&device->cdev->dev,
"FORMAT 5 - Data Check in the key area; "
"offset active\n");
break;
case 0x0B:
dev_warn(&device->cdev->dev,
"FORMAT 5 - Data Check in the data area; "
"offset active\n");
break;
default:
dev_warn(&device->cdev->dev,
"FORMAT 5 - Reserved\n");
}
break;
case 0x60: /* Format 6 - Usage Statistics/Overrun Errors */
switch (msg_no) {
case 0x00:
dev_warn(&device->cdev->dev,
"FORMAT 6 - Overrun on channel A\n");
break;
case 0x01:
dev_warn(&device->cdev->dev,
"FORMAT 6 - Overrun on channel B\n");
break;
case 0x02:
dev_warn(&device->cdev->dev,
"FORMAT 6 - Overrun on channel C\n");
break;
case 0x03:
dev_warn(&device->cdev->dev,
"FORMAT 6 - Overrun on channel D\n");
break;
case 0x04:
dev_warn(&device->cdev->dev,
"FORMAT 6 - Overrun on channel E\n");
break;
case 0x05:
dev_warn(&device->cdev->dev,
"FORMAT 6 - Overrun on channel F\n");
break;
case 0x06:
dev_warn(&device->cdev->dev,
"FORMAT 6 - Overrun on channel G\n");
break;
case 0x07:
dev_warn(&device->cdev->dev,
"FORMAT 6 - Overrun on channel H\n");
break;
default:
dev_warn(&device->cdev->dev,
"FORMAT 6 - Reserved\n");
}
break;
case 0x70: /* Format 7 - Device Connection Control Checks */
switch (msg_no) {
case 0x00:
dev_warn(&device->cdev->dev,
"FORMAT 7 - RCC initiated by a connection "
"check alert\n");
break;
case 0x01:
dev_warn(&device->cdev->dev,
"FORMAT 7 - RCC 1 sequence not "
"successful\n");
break;
case 0x02:
dev_warn(&device->cdev->dev,
"FORMAT 7 - RCC 1 and RCC 2 sequences not "
"successful\n");
break;
case 0x03:
dev_warn(&device->cdev->dev,
"FORMAT 7 - Invalid tag-in during "
"selection sequence\n");
break;
case 0x04:
dev_warn(&device->cdev->dev,
"FORMAT 7 - extra RCC required\n");
break;
case 0x05:
dev_warn(&device->cdev->dev,
"FORMAT 7 - Invalid DCC selection "
"response or timeout\n");
break;
case 0x06:
dev_warn(&device->cdev->dev,
"FORMAT 7 - Missing end operation; device "
"transfer complete\n");
break;
case 0x07:
dev_warn(&device->cdev->dev,
"FORMAT 7 - Missing end operation; device "
"transfer incomplete\n");
break;
case 0x08:
dev_warn(&device->cdev->dev,
"FORMAT 7 - Invalid tag-in for an "
"immediate command sequence\n");
break;
case 0x09:
dev_warn(&device->cdev->dev,
"FORMAT 7 - Invalid tag-in for an "
"extended command sequence\n");
break;
case 0x0A:
dev_warn(&device->cdev->dev,
"FORMAT 7 - 3990 microcode time out when "
"stopping selection\n");
break;
case 0x0B:
dev_warn(&device->cdev->dev,
"FORMAT 7 - No response to selection "
"after a poll interruption\n");
break;
case 0x0C:
dev_warn(&device->cdev->dev,
"FORMAT 7 - Permanent path error (DASD "
"controller not available)\n");
break;
case 0x0D:
dev_warn(&device->cdev->dev,
"FORMAT 7 - DASD controller not available"
" on disconnected command chain\n");
break;
default:
dev_warn(&device->cdev->dev,
"FORMAT 7 - Reserved\n");
}
break;
case 0x80: /* Format 8 - Additional Device Equipment Checks */
switch (msg_no) {
case 0x00: /* No Message */
case 0x01:
dev_warn(&device->cdev->dev,
"FORMAT 8 - Error correction code "
"hardware fault\n");
break;
case 0x03:
dev_warn(&device->cdev->dev,
"FORMAT 8 - Unexpected end operation "
"response code\n");
break;
case 0x04:
dev_warn(&device->cdev->dev,
"FORMAT 8 - End operation with transfer "
"count not zero\n");
break;
case 0x05:
dev_warn(&device->cdev->dev,
"FORMAT 8 - End operation with transfer "
"count zero\n");
break;
case 0x06:
dev_warn(&device->cdev->dev,
"FORMAT 8 - DPS checks after a system "
"reset or selective reset\n");
break;
case 0x07:
dev_warn(&device->cdev->dev,
"FORMAT 8 - DPS cannot be filled\n");
break;
case 0x08:
dev_warn(&device->cdev->dev,
"FORMAT 8 - Short busy time-out during "
"device selection\n");
break;
case 0x09:
dev_warn(&device->cdev->dev,
"FORMAT 8 - DASD controller failed to "
"set or reset the long busy latch\n");
break;
case 0x0A:
dev_warn(&device->cdev->dev,
"FORMAT 8 - No interruption from device "
"during a command chain\n");
break;
default:
dev_warn(&device->cdev->dev,
"FORMAT 8 - Reserved\n");
}
break;
case 0x90: /* Format 9 - Device Read, Write, and Seek Checks */
switch (msg_no) {
case 0x00:
break; /* No Message */
case 0x06:
dev_warn(&device->cdev->dev,
"FORMAT 9 - Device check-2 error\n");
break;
case 0x07:
dev_warn(&device->cdev->dev,
"FORMAT 9 - Head address did not "
"compare\n");
break;
case 0x0A:
dev_warn(&device->cdev->dev,
"FORMAT 9 - Track physical address did "
"not compare while oriented\n");
break;
case 0x0E:
dev_warn(&device->cdev->dev,
"FORMAT 9 - Cylinder address did not "
"compare\n");
break;
default:
dev_warn(&device->cdev->dev,
"FORMAT 9 - Reserved\n");
}
break;
case 0xF0: /* Format F - Cache Storage Checks */
switch (msg_no) {
case 0x00:
dev_warn(&device->cdev->dev,
"FORMAT F - Operation Terminated\n");
break;
case 0x01:
dev_warn(&device->cdev->dev,
"FORMAT F - Subsystem Processing Error\n");
break;
case 0x02:
dev_warn(&device->cdev->dev,
"FORMAT F - Cache or nonvolatile storage "
"equipment failure\n");
break;
case 0x04:
dev_warn(&device->cdev->dev,
"FORMAT F - Caching terminated\n");
break;
case 0x06:
dev_warn(&device->cdev->dev,
"FORMAT F - Cache fast write access not "
"authorized\n");
break;
case 0x07:
dev_warn(&device->cdev->dev,
"FORMAT F - Track format incorrect\n");
break;
case 0x09:
dev_warn(&device->cdev->dev,
"FORMAT F - Caching reinitiated\n");
break;
case 0x0A:
dev_warn(&device->cdev->dev,
"FORMAT F - Nonvolatile storage "
"terminated\n");
break;
case 0x0B:
dev_warn(&device->cdev->dev,
"FORMAT F - Volume is suspended duplex\n");
/* call extended error reporting (EER) */
dasd_eer_write(device, erp->refers,
DASD_EER_PPRCSUSPEND);
break;
case 0x0C:
dev_warn(&device->cdev->dev,
"FORMAT F - Subsystem status cannot be "
"determined\n");
break;
case 0x0D:
dev_warn(&device->cdev->dev,
"FORMAT F - Caching status reset to "
"default\n");
break;
case 0x0E:
dev_warn(&device->cdev->dev,
"FORMAT F - DASD Fast Write inhibited\n");
break;
default:
dev_warn(&device->cdev->dev,
"FORMAT F - Reserved\n");
}
break;
default: /* unknown message format - should not happen
internal error 03 - unknown message format */
snprintf(errorstring, ERRORLENGTH, "03 %x02", msg_format);
dev_err(&device->cdev->dev,
"An error occurred in the DASD device driver, "
"reason=%s\n", errorstring);
break;
} /* end switch message format */
} /* end dasd_3990_handle_env_data */
/*
* DASD_3990_ERP_COM_REJ
*
* DESCRIPTION
* Handles 24 byte 'Command Reject' error.
*
* PARAMETER
* erp current erp_head
* sense current sense data
*
* RETURN VALUES
* erp 'new' erp_head - pointer to new ERP
*/
static struct dasd_ccw_req *
dasd_3990_erp_com_rej(struct dasd_ccw_req * erp, char *sense)
{
struct dasd_device *device = erp->startdev;
erp->function = dasd_3990_erp_com_rej;
/* env data present (ACTION 10 - retry should work) */
if (sense[2] & SNS2_ENV_DATA_PRESENT) {
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"Command Reject - environmental data present");
dasd_3990_handle_env_data(erp, sense);
erp->retries = 5;
} else if (sense[1] & SNS1_WRITE_INHIBITED) {
dev_err(&device->cdev->dev, "An I/O request was rejected"
" because writing is inhibited\n");
erp = dasd_3990_erp_cleanup(erp, DASD_CQR_FAILED);
} else {
/* fatal error - set status to FAILED
internal error 09 - Command Reject */
if (!test_bit(DASD_CQR_SUPPRESS_CR, &erp->flags))
dev_err(&device->cdev->dev,
"An error occurred in the DASD device driver, reason=09\n");
erp = dasd_3990_erp_cleanup(erp, DASD_CQR_FAILED);
}
return erp;
} /* end dasd_3990_erp_com_rej */
/*
* DASD_3990_ERP_BUS_OUT
*
* DESCRIPTION
* Handles 24 byte 'Bus Out Parity Check' error.
*
* PARAMETER
* erp current erp_head
* RETURN VALUES
* erp new erp_head - pointer to new ERP
*/
static struct dasd_ccw_req *
dasd_3990_erp_bus_out(struct dasd_ccw_req * erp)
{
struct dasd_device *device = erp->startdev;
/* first time set initial retry counter and erp_function */
/* and retry once without blocking queue */
/* (this enables easier enqueing of the cqr) */
if (erp->function != dasd_3990_erp_bus_out) {
erp->retries = 256;
erp->function = dasd_3990_erp_bus_out;
} else {
/* issue a message and wait for 'device ready' interrupt */
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"bus out parity error or BOPC requested by "
"channel");
dasd_3990_erp_block_queue(erp, 60*HZ);
}
return erp;
} /* end dasd_3990_erp_bus_out */
/*
* DASD_3990_ERP_EQUIP_CHECK
*
* DESCRIPTION
* Handles 24 byte 'Equipment Check' error.
*
* PARAMETER
* erp current erp_head
* RETURN VALUES
* erp new erp_head - pointer to new ERP
*/
static struct dasd_ccw_req *
dasd_3990_erp_equip_check(struct dasd_ccw_req * erp, char *sense)
{
struct dasd_device *device = erp->startdev;
erp->function = dasd_3990_erp_equip_check;
if (sense[1] & SNS1_WRITE_INHIBITED) {
dev_info(&device->cdev->dev,
"Write inhibited path encountered\n");
/* vary path offline
internal error 04 - Path should be varied off-line.*/
dev_err(&device->cdev->dev, "An error occurred in the DASD "
"device driver, reason=%s\n", "04");
erp = dasd_3990_erp_action_1(erp);
} else if (sense[2] & SNS2_ENV_DATA_PRESENT) {
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"Equipment Check - " "environmental data present");
dasd_3990_handle_env_data(erp, sense);
erp = dasd_3990_erp_action_4(erp, sense);
} else if (sense[1] & SNS1_PERM_ERR) {
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"Equipment Check - retry exhausted or "
"undesirable");
erp = dasd_3990_erp_action_1(erp);
} else {
/* all other equipment checks - Action 5 */
/* rest is done when retries == 0 */
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"Equipment check or processing error");
erp = dasd_3990_erp_action_5(erp);
}
return erp;
} /* end dasd_3990_erp_equip_check */
/*
* DASD_3990_ERP_DATA_CHECK
*
* DESCRIPTION
* Handles 24 byte 'Data Check' error.
*
* PARAMETER
* erp current erp_head
* RETURN VALUES
* erp new erp_head - pointer to new ERP
*/
static struct dasd_ccw_req *
dasd_3990_erp_data_check(struct dasd_ccw_req * erp, char *sense)
{
struct dasd_device *device = erp->startdev;
erp->function = dasd_3990_erp_data_check;
if (sense[2] & SNS2_CORRECTABLE) { /* correctable data check */
/* issue message that the data has been corrected */
dev_emerg(&device->cdev->dev,
"Data recovered during retry with PCI "
"fetch mode active\n");
/* not possible to handle this situation in Linux */
panic("No way to inform application about the possibly "
"incorrect data");
} else if (sense[2] & SNS2_ENV_DATA_PRESENT) {
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"Uncorrectable data check recovered secondary "
"addr of duplex pair");
erp = dasd_3990_erp_action_4(erp, sense);
} else if (sense[1] & SNS1_PERM_ERR) {
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"Uncorrectable data check with internal "
"retry exhausted");
erp = dasd_3990_erp_action_1(erp);
} else {
/* all other data checks */
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"Uncorrectable data check with retry count "
"exhausted...");
erp = dasd_3990_erp_action_5(erp);
}
return erp;
} /* end dasd_3990_erp_data_check */
/*
* DASD_3990_ERP_OVERRUN
*
* DESCRIPTION
* Handles 24 byte 'Overrun' error.
*
* PARAMETER
* erp current erp_head
* RETURN VALUES
* erp new erp_head - pointer to new ERP
*/
static struct dasd_ccw_req *
dasd_3990_erp_overrun(struct dasd_ccw_req * erp, char *sense)
{
struct dasd_device *device = erp->startdev;
erp->function = dasd_3990_erp_overrun;
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"Overrun - service overrun or overrun"
" error requested by channel");
erp = dasd_3990_erp_action_5(erp);
return erp;
} /* end dasd_3990_erp_overrun */
/*
* DASD_3990_ERP_INV_FORMAT
*
* DESCRIPTION
* Handles 24 byte 'Invalid Track Format' error.
*
* PARAMETER
* erp current erp_head
* RETURN VALUES
* erp new erp_head - pointer to new ERP
*/
static struct dasd_ccw_req *
dasd_3990_erp_inv_format(struct dasd_ccw_req * erp, char *sense)
{
struct dasd_device *device = erp->startdev;
erp->function = dasd_3990_erp_inv_format;
if (sense[2] & SNS2_ENV_DATA_PRESENT) {
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"Track format error when destaging or "
"staging data");
dasd_3990_handle_env_data(erp, sense);
erp = dasd_3990_erp_action_4(erp, sense);
} else {
/* internal error 06 - The track format is not valid*/
dev_err(&device->cdev->dev,
"An error occurred in the DASD device driver, "
"reason=%s\n", "06");
erp = dasd_3990_erp_cleanup(erp, DASD_CQR_FAILED);
}
return erp;
} /* end dasd_3990_erp_inv_format */
/*
* DASD_3990_ERP_EOC
*
* DESCRIPTION
* Handles 24 byte 'End-of-Cylinder' error.
*
* PARAMETER
* erp already added default erp
* RETURN VALUES
* erp pointer to original (failed) cqr.
*/
static struct dasd_ccw_req *
dasd_3990_erp_EOC(struct dasd_ccw_req * default_erp, char *sense)
{
struct dasd_device *device = default_erp->startdev;
dev_err(&device->cdev->dev,
"The cylinder data for accessing the DASD is inconsistent\n");
/* implement action 7 - BUG */
return dasd_3990_erp_cleanup(default_erp, DASD_CQR_FAILED);
} /* end dasd_3990_erp_EOC */
/*
* DASD_3990_ERP_ENV_DATA
*
* DESCRIPTION
* Handles 24 byte 'Environmental-Data Present' error.
*
* PARAMETER
* erp current erp_head
* RETURN VALUES
* erp new erp_head - pointer to new ERP
*/
static struct dasd_ccw_req *
dasd_3990_erp_env_data(struct dasd_ccw_req * erp, char *sense)
{
struct dasd_device *device = erp->startdev;
erp->function = dasd_3990_erp_env_data;
DBF_DEV_EVENT(DBF_WARNING, device, "%s", "Environmental data present");
dasd_3990_handle_env_data(erp, sense);
/* don't retry on disabled interface */
if (sense[7] != 0x0F) {
erp = dasd_3990_erp_action_4(erp, sense);
} else {
erp->status = DASD_CQR_FILLED;
}
return erp;
} /* end dasd_3990_erp_env_data */
/*
* DASD_3990_ERP_NO_REC
*
* DESCRIPTION
* Handles 24 byte 'No Record Found' error.
*
* PARAMETER
* erp already added default ERP
*
* RETURN VALUES
* erp new erp_head - pointer to new ERP
*/
static struct dasd_ccw_req *
dasd_3990_erp_no_rec(struct dasd_ccw_req * default_erp, char *sense)
{
struct dasd_device *device = default_erp->startdev;
/*
* In some cases the 'No Record Found' error might be expected and
* log messages shouldn't be written then.
* Check if the according suppress bit is set.
*/
if (!test_bit(DASD_CQR_SUPPRESS_NRF, &default_erp->flags))
dev_err(&device->cdev->dev,
"The specified record was not found\n");
return dasd_3990_erp_cleanup(default_erp, DASD_CQR_FAILED);
} /* end dasd_3990_erp_no_rec */
/*
* DASD_3990_ERP_FILE_PROT
*
* DESCRIPTION
* Handles 24 byte 'File Protected' error.
* Note: Seek related recovery is not implemented because
* wee don't use the seek command yet.
*
* PARAMETER
* erp current erp_head
* RETURN VALUES
* erp new erp_head - pointer to new ERP
*/
static struct dasd_ccw_req *
dasd_3990_erp_file_prot(struct dasd_ccw_req * erp)
{
struct dasd_device *device = erp->startdev;
/*
* In some cases the 'File Protected' error might be expected and
* log messages shouldn't be written then.
* Check if the according suppress bit is set.
*/
if (!test_bit(DASD_CQR_SUPPRESS_FP, &erp->flags))
dev_err(&device->cdev->dev,
"Accessing the DASD failed because of a hardware error\n");
return dasd_3990_erp_cleanup(erp, DASD_CQR_FAILED);
} /* end dasd_3990_erp_file_prot */
/*
* DASD_3990_ERP_INSPECT_ALIAS
*
* DESCRIPTION
* Checks if the original request was started on an alias device.
* If yes, it modifies the original and the erp request so that
* the erp request can be started on a base device.
*
* PARAMETER
* erp pointer to the currently created default ERP
*
* RETURN VALUES
* erp pointer to the modified ERP, or NULL
*/
static struct dasd_ccw_req *dasd_3990_erp_inspect_alias(
struct dasd_ccw_req *erp)
{
struct dasd_ccw_req *cqr = erp->refers;
char *sense;
if (cqr->block &&
(cqr->block->base != cqr->startdev)) {
sense = dasd_get_sense(&erp->refers->irb);
/*
* dynamic pav may have changed base alias mapping
*/
if (!test_bit(DASD_FLAG_OFFLINE, &cqr->startdev->flags) && sense
&& (sense[0] == 0x10) && (sense[7] == 0x0F)
&& (sense[8] == 0x67)) {
/*
* remove device from alias handling to prevent new
* requests from being scheduled on the
* wrong alias device
*/
dasd_alias_remove_device(cqr->startdev);
/* schedule worker to reload device */
dasd_reload_device(cqr->startdev);
}
if (cqr->startdev->features & DASD_FEATURE_ERPLOG) {
DBF_DEV_EVENT(DBF_ERR, cqr->startdev,
"ERP on alias device for request %p,"
" recover on base device %s", cqr,
dev_name(&cqr->block->base->cdev->dev));
}
dasd_eckd_reset_ccw_to_base_io(cqr);
erp->startdev = cqr->block->base;
erp->function = dasd_3990_erp_inspect_alias;
return erp;
} else
return NULL;
}
/*
* DASD_3990_ERP_INSPECT_24
*
* DESCRIPTION
* Does a detailed inspection of the 24 byte sense data
* and sets up a related error recovery action.
*
* PARAMETER
* sense sense data of the actual error
* erp pointer to the currently created default ERP
*
* RETURN VALUES
* erp pointer to the (addtitional) ERP
*/
static struct dasd_ccw_req *
dasd_3990_erp_inspect_24(struct dasd_ccw_req * erp, char *sense)
{
struct dasd_ccw_req *erp_filled = NULL;
/* Check sense for .... */
/* 'Command Reject' */
if ((erp_filled == NULL) && (sense[0] & SNS0_CMD_REJECT)) {
erp_filled = dasd_3990_erp_com_rej(erp, sense);
}
/* 'Intervention Required' */
if ((erp_filled == NULL) && (sense[0] & SNS0_INTERVENTION_REQ)) {
erp_filled = dasd_3990_erp_int_req(erp);
}
/* 'Bus Out Parity Check' */
if ((erp_filled == NULL) && (sense[0] & SNS0_BUS_OUT_CHECK)) {
erp_filled = dasd_3990_erp_bus_out(erp);
}
/* 'Equipment Check' */
if ((erp_filled == NULL) && (sense[0] & SNS0_EQUIPMENT_CHECK)) {
erp_filled = dasd_3990_erp_equip_check(erp, sense);
}
/* 'Data Check' */
if ((erp_filled == NULL) && (sense[0] & SNS0_DATA_CHECK)) {
erp_filled = dasd_3990_erp_data_check(erp, sense);
}
/* 'Overrun' */
if ((erp_filled == NULL) && (sense[0] & SNS0_OVERRUN)) {
erp_filled = dasd_3990_erp_overrun(erp, sense);
}
/* 'Invalid Track Format' */
if ((erp_filled == NULL) && (sense[1] & SNS1_INV_TRACK_FORMAT)) {
erp_filled = dasd_3990_erp_inv_format(erp, sense);
}
/* 'End-of-Cylinder' */
if ((erp_filled == NULL) && (sense[1] & SNS1_EOC)) {
erp_filled = dasd_3990_erp_EOC(erp, sense);
}
/* 'Environmental Data' */
if ((erp_filled == NULL) && (sense[2] & SNS2_ENV_DATA_PRESENT)) {
erp_filled = dasd_3990_erp_env_data(erp, sense);
}
/* 'No Record Found' */
if ((erp_filled == NULL) && (sense[1] & SNS1_NO_REC_FOUND)) {
erp_filled = dasd_3990_erp_no_rec(erp, sense);
}
/* 'File Protected' */
if ((erp_filled == NULL) && (sense[1] & SNS1_FILE_PROTECTED)) {
erp_filled = dasd_3990_erp_file_prot(erp);
}
/* other (unknown) error - do default ERP */
if (erp_filled == NULL) {
erp_filled = erp;
}
return erp_filled;
} /* END dasd_3990_erp_inspect_24 */
/*
*****************************************************************************
* 32 byte sense ERP functions (only)
*****************************************************************************
*/
/*
* DASD_3990_ERPACTION_10_32
*
* DESCRIPTION
* Handles 32 byte 'Action 10' of Single Program Action Codes.
* Just retry and if retry doesn't work, return with error.
*
* PARAMETER
* erp current erp_head
* sense current sense data
* RETURN VALUES
* erp modified erp_head
*/
static struct dasd_ccw_req *
dasd_3990_erp_action_10_32(struct dasd_ccw_req * erp, char *sense)
{
struct dasd_device *device = erp->startdev;
erp->retries = 256;
erp->function = dasd_3990_erp_action_10_32;
DBF_DEV_EVENT(DBF_WARNING, device, "%s", "Perform logging requested");
return erp;
} /* end dasd_3990_erp_action_10_32 */
/*
* DASD_3990_ERP_ACTION_1B_32
*
* DESCRIPTION
* Handles 32 byte 'Action 1B' of Single Program Action Codes.
* A write operation could not be finished because of an unexpected
* condition.
* The already created 'default erp' is used to get the link to
* the erp chain, but it can not be used for this recovery
* action because it contains no DE/LO data space.
*
* PARAMETER
* default_erp already added default erp.
* sense current sense data
*
* RETURN VALUES
* erp new erp or
* default_erp in case of imprecise ending or error
*/
static struct dasd_ccw_req *
dasd_3990_erp_action_1B_32(struct dasd_ccw_req * default_erp, char *sense)
{
struct dasd_device *device = default_erp->startdev;
__u32 cpa = 0;
struct dasd_ccw_req *cqr;
struct dasd_ccw_req *erp;
struct DE_eckd_data *DE_data;
struct PFX_eckd_data *PFX_data;
char *LO_data; /* LO_eckd_data_t */
struct ccw1 *ccw, *oldccw;
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"Write not finished because of unexpected condition");
default_erp->function = dasd_3990_erp_action_1B_32;
/* determine the original cqr */
cqr = default_erp;
while (cqr->refers != NULL) {
cqr = cqr->refers;
}
if (scsw_is_tm(&cqr->irb.scsw)) {
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"32 bit sense, action 1B is not defined"
" in transport mode - just retry");
return default_erp;
}
/* for imprecise ending just do default erp */
if (sense[1] & 0x01) {
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"Imprecise ending is set - just retry");
return default_erp;
}
/* determine the address of the CCW to be restarted */
/* Imprecise ending is not set -> addr from IRB-SCSW */
cpa = default_erp->refers->irb.scsw.cmd.cpa;
if (cpa == 0) {
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"Unable to determine address of the CCW "
"to be restarted");
return dasd_3990_erp_cleanup(default_erp, DASD_CQR_FAILED);
}
/* Build new ERP request including DE/LO */
erp = dasd_alloc_erp_request((char *) &cqr->magic,
2 + 1,/* DE/LO + TIC */
sizeof(struct DE_eckd_data) +
sizeof(struct LO_eckd_data), device);
if (IS_ERR(erp)) {
/* internal error 01 - Unable to allocate ERP */
dev_err(&device->cdev->dev, "An error occurred in the DASD "
"device driver, reason=%s\n", "01");
return dasd_3990_erp_cleanup(default_erp, DASD_CQR_FAILED);
}
/* use original DE */
DE_data = erp->data;
oldccw = cqr->cpaddr;
if (oldccw->cmd_code == DASD_ECKD_CCW_PFX) {
PFX_data = cqr->data;
memcpy(DE_data, &PFX_data->define_extent,
sizeof(struct DE_eckd_data));
} else
memcpy(DE_data, cqr->data, sizeof(struct DE_eckd_data));
/* create LO */
LO_data = erp->data + sizeof(struct DE_eckd_data);
if ((sense[3] == 0x01) && (LO_data[1] & 0x01)) {
/* should not */
return dasd_3990_erp_cleanup(default_erp, DASD_CQR_FAILED);
}
if ((sense[7] & 0x3F) == 0x01) {
/* operation code is WRITE DATA -> data area orientation */
LO_data[0] = 0x81;
} else if ((sense[7] & 0x3F) == 0x03) {
/* operation code is FORMAT WRITE -> index orientation */
LO_data[0] = 0xC3;
} else {
LO_data[0] = sense[7]; /* operation */
}
LO_data[1] = sense[8]; /* auxiliary */
LO_data[2] = sense[9];
LO_data[3] = sense[3]; /* count */
LO_data[4] = sense[29]; /* seek_addr.cyl */
LO_data[5] = sense[30]; /* seek_addr.cyl 2nd byte */
LO_data[7] = sense[31]; /* seek_addr.head 2nd byte */
memcpy(&(LO_data[8]), &(sense[11]), 8);
/* create DE ccw */
ccw = erp->cpaddr;
memset(ccw, 0, sizeof(struct ccw1));
ccw->cmd_code = DASD_ECKD_CCW_DEFINE_EXTENT;
ccw->flags = CCW_FLAG_CC;
ccw->count = 16;
ccw->cda = (__u32)(addr_t) DE_data;
/* create LO ccw */
ccw++;
memset(ccw, 0, sizeof(struct ccw1));
ccw->cmd_code = DASD_ECKD_CCW_LOCATE_RECORD;
ccw->flags = CCW_FLAG_CC;
ccw->count = 16;
ccw->cda = (__u32)(addr_t) LO_data;
/* TIC to the failed ccw */
ccw++;
ccw->cmd_code = CCW_CMD_TIC;
ccw->cda = cpa;
/* fill erp related fields */
erp->flags = default_erp->flags;
erp->function = dasd_3990_erp_action_1B_32;
erp->refers = default_erp->refers;
erp->startdev = device;
erp->memdev = device;
erp->magic = default_erp->magic;
erp->expires = default_erp->expires;
erp->retries = 256;
erp->buildclk = get_tod_clock();
erp->status = DASD_CQR_FILLED;
/* remove the default erp */
dasd_free_erp_request(default_erp, device);
return erp;
} /* end dasd_3990_erp_action_1B_32 */
/*
* DASD_3990_UPDATE_1B
*
* DESCRIPTION
* Handles the update to the 32 byte 'Action 1B' of Single Program
* Action Codes in case the first action was not successful.
* The already created 'previous_erp' is the currently not successful
* ERP.
*
* PARAMETER
* previous_erp already created previous erp.
* sense current sense data
* RETURN VALUES
* erp modified erp
*/
static struct dasd_ccw_req *
dasd_3990_update_1B(struct dasd_ccw_req * previous_erp, char *sense)
{
struct dasd_device *device = previous_erp->startdev;
__u32 cpa = 0;
struct dasd_ccw_req *cqr;
struct dasd_ccw_req *erp;
char *LO_data; /* struct LO_eckd_data */
struct ccw1 *ccw;
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"Write not finished because of unexpected condition"
" - follow on");
/* determine the original cqr */
cqr = previous_erp;
while (cqr->refers != NULL) {
cqr = cqr->refers;
}
if (scsw_is_tm(&cqr->irb.scsw)) {
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"32 bit sense, action 1B, update,"
" in transport mode - just retry");
return previous_erp;
}
/* for imprecise ending just do default erp */
if (sense[1] & 0x01) {
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"Imprecise ending is set - just retry");
previous_erp->status = DASD_CQR_FILLED;
return previous_erp;
}
/* determine the address of the CCW to be restarted */
/* Imprecise ending is not set -> addr from IRB-SCSW */
cpa = previous_erp->irb.scsw.cmd.cpa;
if (cpa == 0) {
/* internal error 02 -
Unable to determine address of the CCW to be restarted */
dev_err(&device->cdev->dev, "An error occurred in the DASD "
"device driver, reason=%s\n", "02");
previous_erp->status = DASD_CQR_FAILED;
return previous_erp;
}
erp = previous_erp;
/* update the LO with the new returned sense data */
LO_data = erp->data + sizeof(struct DE_eckd_data);
if ((sense[3] == 0x01) && (LO_data[1] & 0x01)) {
/* should not happen */
previous_erp->status = DASD_CQR_FAILED;
return previous_erp;
}
if ((sense[7] & 0x3F) == 0x01) {
/* operation code is WRITE DATA -> data area orientation */
LO_data[0] = 0x81;
} else if ((sense[7] & 0x3F) == 0x03) {
/* operation code is FORMAT WRITE -> index orientation */
LO_data[0] = 0xC3;
} else {
LO_data[0] = sense[7]; /* operation */
}
LO_data[1] = sense[8]; /* auxiliary */
LO_data[2] = sense[9];
LO_data[3] = sense[3]; /* count */
LO_data[4] = sense[29]; /* seek_addr.cyl */
LO_data[5] = sense[30]; /* seek_addr.cyl 2nd byte */
LO_data[7] = sense[31]; /* seek_addr.head 2nd byte */
memcpy(&(LO_data[8]), &(sense[11]), 8);
/* TIC to the failed ccw */
ccw = erp->cpaddr; /* addr of DE ccw */
ccw++; /* addr of LE ccw */
ccw++; /* addr of TIC ccw */
ccw->cda = cpa;
erp->status = DASD_CQR_FILLED;
return erp;
} /* end dasd_3990_update_1B */
/*
* DASD_3990_ERP_COMPOUND_RETRY
*
* DESCRIPTION
* Handles the compound ERP action retry code.
* NOTE: At least one retry is done even if zero is specified
* by the sense data. This makes enqueueing of the request
* easier.
*
* PARAMETER
* sense sense data of the actual error
* erp pointer to the currently created ERP
*
* RETURN VALUES
* erp modified ERP pointer
*
*/
static void
dasd_3990_erp_compound_retry(struct dasd_ccw_req * erp, char *sense)
{
switch (sense[25] & 0x03) {
case 0x00: /* no not retry */
erp->retries = 1;
break;
case 0x01: /* retry 2 times */
erp->retries = 2;
break;
case 0x02: /* retry 10 times */
erp->retries = 10;
break;
case 0x03: /* retry 256 times */
erp->retries = 256;
break;
default:
BUG();
}
erp->function = dasd_3990_erp_compound_retry;
} /* end dasd_3990_erp_compound_retry */
/*
* DASD_3990_ERP_COMPOUND_PATH
*
* DESCRIPTION
* Handles the compound ERP action for retry on alternate
* channel path.
*
* PARAMETER
* sense sense data of the actual error
* erp pointer to the currently created ERP
*
* RETURN VALUES
* erp modified ERP pointer
*
*/
static void
dasd_3990_erp_compound_path(struct dasd_ccw_req * erp, char *sense)
{
if (sense[25] & DASD_SENSE_BIT_3) {
dasd_3990_erp_alternate_path(erp);
if (erp->status == DASD_CQR_FAILED &&
!test_bit(DASD_CQR_VERIFY_PATH, &erp->flags)) {
/* reset the lpm and the status to be able to
* try further actions. */
erp->lpm = dasd_path_get_opm(erp->startdev);
erp->status = DASD_CQR_NEED_ERP;
}
}
erp->function = dasd_3990_erp_compound_path;
} /* end dasd_3990_erp_compound_path */
/*
* DASD_3990_ERP_COMPOUND_CODE
*
* DESCRIPTION
* Handles the compound ERP action for retry code.
*
* PARAMETER
* sense sense data of the actual error
* erp pointer to the currently created ERP
*
* RETURN VALUES
* erp NEW ERP pointer
*
*/
static struct dasd_ccw_req *
dasd_3990_erp_compound_code(struct dasd_ccw_req * erp, char *sense)
{
if (sense[25] & DASD_SENSE_BIT_2) {
switch (sense[28]) {
case 0x17:
/* issue a Diagnostic Control command with an
* Inhibit Write subcommand and controller modifier */
erp = dasd_3990_erp_DCTL(erp, 0x20);
break;
case 0x25:
/* wait for 5 seconds and retry again */
erp->retries = 1;
dasd_3990_erp_block_queue (erp, 5*HZ);
break;
default:
/* should not happen - continue */
break;
}
}
erp->function = dasd_3990_erp_compound_code;
return erp;
} /* end dasd_3990_erp_compound_code */
/*
* DASD_3990_ERP_COMPOUND_CONFIG
*
* DESCRIPTION
* Handles the compound ERP action for configuration
* dependent error.
* Note: duplex handling is not implemented (yet).
*
* PARAMETER
* sense sense data of the actual error
* erp pointer to the currently created ERP
*
* RETURN VALUES
* erp modified ERP pointer
*
*/
static void
dasd_3990_erp_compound_config(struct dasd_ccw_req * erp, char *sense)
{
if ((sense[25] & DASD_SENSE_BIT_1) && (sense[26] & DASD_SENSE_BIT_2)) {
/* set to suspended duplex state then restart
internal error 05 - Set device to suspended duplex state
should be done */
struct dasd_device *device = erp->startdev;
dev_err(&device->cdev->dev,
"An error occurred in the DASD device driver, "
"reason=%s\n", "05");
}
erp->function = dasd_3990_erp_compound_config;
} /* end dasd_3990_erp_compound_config */
/*
* DASD_3990_ERP_COMPOUND
*
* DESCRIPTION
* Does the further compound program action if
* compound retry was not successful.
*
* PARAMETER
* sense sense data of the actual error
* erp pointer to the current (failed) ERP
*
* RETURN VALUES
* erp (additional) ERP pointer
*
*/
static struct dasd_ccw_req *
dasd_3990_erp_compound(struct dasd_ccw_req * erp, char *sense)
{
if ((erp->function == dasd_3990_erp_compound_retry) &&
(erp->status == DASD_CQR_NEED_ERP)) {
dasd_3990_erp_compound_path(erp, sense);
}
if ((erp->function == dasd_3990_erp_compound_path) &&
(erp->status == DASD_CQR_NEED_ERP)) {
erp = dasd_3990_erp_compound_code(erp, sense);
}
if ((erp->function == dasd_3990_erp_compound_code) &&
(erp->status == DASD_CQR_NEED_ERP)) {
dasd_3990_erp_compound_config(erp, sense);
}
/* if no compound action ERP specified, the request failed */
if (erp->status == DASD_CQR_NEED_ERP)
erp->status = DASD_CQR_FAILED;
return erp;
} /* end dasd_3990_erp_compound */
/*
*DASD_3990_ERP_HANDLE_SIM
*
*DESCRIPTION
* inspects the SIM SENSE data and starts an appropriate action
*
* PARAMETER
* sense sense data of the actual error
*
* RETURN VALUES
* none
*/
void
dasd_3990_erp_handle_sim(struct dasd_device *device, char *sense)
{
/* print message according to log or message to operator mode */
if ((sense[24] & DASD_SIM_MSG_TO_OP) || (sense[1] & 0x10)) {
/* print SIM SRC from RefCode */
dev_err(&device->cdev->dev, "SIM - SRC: "
"%02x%02x%02x%02x\n", sense[22],
sense[23], sense[11], sense[12]);
} else if (sense[24] & DASD_SIM_LOG) {
/* print SIM SRC Refcode */
dev_warn(&device->cdev->dev, "log SIM - SRC: "
"%02x%02x%02x%02x\n", sense[22],
sense[23], sense[11], sense[12]);
}
}
/*
* DASD_3990_ERP_INSPECT_32
*
* DESCRIPTION
* Does a detailed inspection of the 32 byte sense data
* and sets up a related error recovery action.
*
* PARAMETER
* sense sense data of the actual error
* erp pointer to the currently created default ERP
*
* RETURN VALUES
* erp_filled pointer to the ERP
*
*/
static struct dasd_ccw_req *
dasd_3990_erp_inspect_32(struct dasd_ccw_req * erp, char *sense)
{
struct dasd_device *device = erp->startdev;
erp->function = dasd_3990_erp_inspect_32;
/* check for SIM sense data */
if ((sense[6] & DASD_SIM_SENSE) == DASD_SIM_SENSE)
dasd_3990_erp_handle_sim(device, sense);
if (sense[25] & DASD_SENSE_BIT_0) {
/* compound program action codes (byte25 bit 0 == '1') */
dasd_3990_erp_compound_retry(erp, sense);
} else {
/* single program action codes (byte25 bit 0 == '0') */
switch (sense[25]) {
case 0x00: /* success - use default ERP for retries */
DBF_DEV_EVENT(DBF_DEBUG, device, "%s",
"ERP called for successful request"
" - just retry");
break;
case 0x01: /* fatal error */
dev_err(&device->cdev->dev,
"ERP failed for the DASD\n");
erp = dasd_3990_erp_cleanup(erp, DASD_CQR_FAILED);
break;
case 0x02: /* intervention required */
case 0x03: /* intervention required during dual copy */
erp = dasd_3990_erp_int_req(erp);
break;
case 0x0F: /* length mismatch during update write command
internal error 08 - update write command error*/
dev_err(&device->cdev->dev, "An error occurred in the "
"DASD device driver, reason=%s\n", "08");
erp = dasd_3990_erp_cleanup(erp, DASD_CQR_FAILED);
break;
case 0x10: /* logging required for other channel program */
erp = dasd_3990_erp_action_10_32(erp, sense);
break;
case 0x15: /* next track outside defined extend
internal error 07 - The next track is not
within the defined storage extent */
dev_err(&device->cdev->dev,
"An error occurred in the DASD device driver, "
"reason=%s\n", "07");
erp = dasd_3990_erp_cleanup(erp, DASD_CQR_FAILED);
break;
case 0x1B: /* unexpected condition during write */
erp = dasd_3990_erp_action_1B_32(erp, sense);
break;
case 0x1C: /* invalid data */
dev_emerg(&device->cdev->dev,
"Data recovered during retry with PCI "
"fetch mode active\n");
/* not possible to handle this situation in Linux */
panic
("Invalid data - No way to inform application "
"about the possibly incorrect data");
break;
case 0x1D: /* state-change pending */
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"A State change pending condition exists "
"for the subsystem or device");
erp = dasd_3990_erp_action_4(erp, sense);
break;
case 0x1E: /* busy */
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"Busy condition exists "
"for the subsystem or device");
erp = dasd_3990_erp_action_4(erp, sense);
break;
default: /* all others errors - default erp */
break;
}
}
return erp;
} /* end dasd_3990_erp_inspect_32 */
static void dasd_3990_erp_disable_path(struct dasd_device *device, __u8 lpum)
{
int pos = pathmask_to_pos(lpum);
if (!(device->features & DASD_FEATURE_PATH_AUTODISABLE)) {
dev_err(&device->cdev->dev,
"Path %x.%02x (pathmask %02x) is operational despite excessive IFCCs\n",
device->path[pos].cssid, device->path[pos].chpid, lpum);
goto out;
}
/* no remaining path, cannot disable */
if (!(dasd_path_get_opm(device) & ~lpum)) {
dev_err(&device->cdev->dev,
"Last path %x.%02x (pathmask %02x) is operational despite excessive IFCCs\n",
device->path[pos].cssid, device->path[pos].chpid, lpum);
goto out;
}
dev_err(&device->cdev->dev,
"Path %x.%02x (pathmask %02x) is disabled - IFCC threshold exceeded\n",
device->path[pos].cssid, device->path[pos].chpid, lpum);
dasd_path_remove_opm(device, lpum);
dasd_path_add_ifccpm(device, lpum);
out:
device->path[pos].errorclk = 0;
atomic_set(&device->path[pos].error_count, 0);
}
static void dasd_3990_erp_account_error(struct dasd_ccw_req *erp)
{
struct dasd_device *device = erp->startdev;
__u8 lpum = erp->refers->irb.esw.esw1.lpum;
int pos = pathmask_to_pos(lpum);
unsigned long clk;
if (!device->path_thrhld)
return;
clk = get_tod_clock();
/*
* check if the last error is longer ago than the timeout,
* if so reset error state
*/
if ((tod_to_ns(clk - device->path[pos].errorclk) / NSEC_PER_SEC)
>= device->path_interval) {
atomic_set(&device->path[pos].error_count, 0);
device->path[pos].errorclk = 0;
}
atomic_inc(&device->path[pos].error_count);
device->path[pos].errorclk = clk;
/* threshold exceeded disable path if possible */
if (atomic_read(&device->path[pos].error_count) >=
device->path_thrhld)
dasd_3990_erp_disable_path(device, lpum);
}
/*
*****************************************************************************
* main ERP control functions (24 and 32 byte sense)
*****************************************************************************
*/
/*
* DASD_3990_ERP_CONTROL_CHECK
*
* DESCRIPTION
* Does a generic inspection if a control check occurred and sets up
* the related error recovery procedure
*
* PARAMETER
* erp pointer to the currently created default ERP
*
* RETURN VALUES
* erp_filled pointer to the erp
*/
static struct dasd_ccw_req *
dasd_3990_erp_control_check(struct dasd_ccw_req *erp)
{
struct dasd_device *device = erp->startdev;
if (scsw_cstat(&erp->refers->irb.scsw) & (SCHN_STAT_INTF_CTRL_CHK
| SCHN_STAT_CHN_CTRL_CHK)) {
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"channel or interface control check");
dasd_3990_erp_account_error(erp);
erp = dasd_3990_erp_action_4(erp, NULL);
}
return erp;
}
/*
* DASD_3990_ERP_INSPECT
*
* DESCRIPTION
* Does a detailed inspection for sense data by calling either
* the 24-byte or the 32-byte inspection routine.
*
* PARAMETER
* erp pointer to the currently created default ERP
* RETURN VALUES
* erp_new contens was possibly modified
*/
static struct dasd_ccw_req *
dasd_3990_erp_inspect(struct dasd_ccw_req *erp)
{
struct dasd_ccw_req *erp_new = NULL;
char *sense;
/* if this problem occurred on an alias retry on base */
erp_new = dasd_3990_erp_inspect_alias(erp);
if (erp_new)
return erp_new;
/* sense data are located in the refers record of the
* already set up new ERP !
* check if concurrent sens is available
*/
sense = dasd_get_sense(&erp->refers->irb);
if (!sense)
erp_new = dasd_3990_erp_control_check(erp);
/* distinguish between 24 and 32 byte sense data */
else if (sense[27] & DASD_SENSE_BIT_0) {
/* inspect the 24 byte sense data */
erp_new = dasd_3990_erp_inspect_24(erp, sense);
} else {
/* inspect the 32 byte sense data */
erp_new = dasd_3990_erp_inspect_32(erp, sense);
} /* end distinguish between 24 and 32 byte sense data */
return erp_new;
}
/*
* DASD_3990_ERP_ADD_ERP
*
* DESCRIPTION
* This function adds an additional request block (ERP) to the head of
* the given cqr (or erp).
* For a command mode cqr the erp is initialized as an default erp
* (retry TIC).
* For transport mode we make a copy of the original TCW (points to
* the original TCCB, TIDALs, etc.) but give it a fresh
* TSB so the original sense data will not be changed.
*
* PARAMETER
* cqr head of the current ERP-chain (or single cqr if
* first error)
* RETURN VALUES
* erp pointer to new ERP-chain head
*/
static struct dasd_ccw_req *dasd_3990_erp_add_erp(struct dasd_ccw_req *cqr)
{
struct dasd_device *device = cqr->startdev;
struct ccw1 *ccw;
struct dasd_ccw_req *erp;
int cplength, datasize;
struct tcw *tcw;
struct tsb *tsb;
if (cqr->cpmode == 1) {
cplength = 0;
/* TCW needs to be 64 byte aligned, so leave enough room */
datasize = 64 + sizeof(struct tcw) + sizeof(struct tsb);
} else {
cplength = 2;
datasize = 0;
}
/* allocate additional request block */
erp = dasd_alloc_erp_request((char *) &cqr->magic,
cplength, datasize, device);
if (IS_ERR(erp)) {
if (cqr->retries <= 0) {
DBF_DEV_EVENT(DBF_ERR, device, "%s",
"Unable to allocate ERP request");
cqr->status = DASD_CQR_FAILED;
cqr->stopclk = get_tod_clock();
} else {
DBF_DEV_EVENT(DBF_ERR, device,
"Unable to allocate ERP request "
"(%i retries left)",
cqr->retries);
dasd_block_set_timer(device->block, (HZ << 3));
}
return erp;
}
ccw = cqr->cpaddr;
if (cqr->cpmode == 1) {
/* make a shallow copy of the original tcw but set new tsb */
erp->cpmode = 1;
erp->cpaddr = PTR_ALIGN(erp->data, 64);
tcw = erp->cpaddr;
tsb = (struct tsb *) &tcw[1];
*tcw = *((struct tcw *)cqr->cpaddr);
tcw->tsb = (long)tsb;
} else if (ccw->cmd_code == DASD_ECKD_CCW_PSF) {
/* PSF cannot be chained from NOOP/TIC */
erp->cpaddr = cqr->cpaddr;
} else {
/* initialize request with default TIC to current ERP/CQR */
ccw = erp->cpaddr;
ccw->cmd_code = CCW_CMD_NOOP;
ccw->flags = CCW_FLAG_CC;
ccw++;
ccw->cmd_code = CCW_CMD_TIC;
ccw->cda = (long)(cqr->cpaddr);
}
erp->flags = cqr->flags;
erp->function = dasd_3990_erp_add_erp;
erp->refers = cqr;
erp->startdev = device;
erp->memdev = device;
erp->block = cqr->block;
erp->magic = cqr->magic;
erp->expires = cqr->expires;
erp->retries = 256;
erp->buildclk = get_tod_clock();
erp->status = DASD_CQR_FILLED;
return erp;
}
/*
* DASD_3990_ERP_ADDITIONAL_ERP
*
* DESCRIPTION
* An additional ERP is needed to handle the current error.
* Add ERP to the head of the ERP-chain containing the ERP processing
* determined based on the sense data.
*
* PARAMETER
* cqr head of the current ERP-chain (or single cqr if
* first error)
*
* RETURN VALUES
* erp pointer to new ERP-chain head
*/
static struct dasd_ccw_req *
dasd_3990_erp_additional_erp(struct dasd_ccw_req * cqr)
{
struct dasd_ccw_req *erp = NULL;
/* add erp and initialize with default TIC */
erp = dasd_3990_erp_add_erp(cqr);
if (IS_ERR(erp))
return erp;
/* inspect sense, determine specific ERP if possible */
if (erp != cqr) {
erp = dasd_3990_erp_inspect(erp);
}
return erp;
} /* end dasd_3990_erp_additional_erp */
/*
* DASD_3990_ERP_ERROR_MATCH
*
* DESCRIPTION
* Check if the device status of the given cqr is the same.
* This means that the failed CCW and the relevant sense data
* must match.
* I don't distinguish between 24 and 32 byte sense because in case of
* 24 byte sense byte 25 and 27 is set as well.
*
* PARAMETER
* cqr1 first cqr, which will be compared with the
* cqr2 second cqr.
*
* RETURN VALUES
* match 'boolean' for match found
* returns 1 if match found, otherwise 0.
*/
static int dasd_3990_erp_error_match(struct dasd_ccw_req *cqr1,
struct dasd_ccw_req *cqr2)
{
char *sense1, *sense2;
if (cqr1->startdev != cqr2->startdev)
return 0;
sense1 = dasd_get_sense(&cqr1->irb);
sense2 = dasd_get_sense(&cqr2->irb);
/* one request has sense data, the other not -> no match, return 0 */
if (!sense1 != !sense2)
return 0;
/* no sense data in both cases -> check cstat for IFCC */
if (!sense1 && !sense2) {
if ((scsw_cstat(&cqr1->irb.scsw) & (SCHN_STAT_INTF_CTRL_CHK |
SCHN_STAT_CHN_CTRL_CHK)) ==
(scsw_cstat(&cqr2->irb.scsw) & (SCHN_STAT_INTF_CTRL_CHK |
SCHN_STAT_CHN_CTRL_CHK)))
return 1; /* match with ifcc*/
}
/* check sense data; byte 0-2,25,27 */
if (!(sense1 && sense2 &&
(memcmp(sense1, sense2, 3) == 0) &&
(sense1[27] == sense2[27]) &&
(sense1[25] == sense2[25]))) {
return 0; /* sense doesn't match */
}
return 1; /* match */
} /* end dasd_3990_erp_error_match */
/*
* DASD_3990_ERP_IN_ERP
*
* DESCRIPTION
* check if the current error already happened before.
* quick exit if current cqr is not an ERP (cqr->refers=NULL)
*
* PARAMETER
* cqr failed cqr (either original cqr or already an erp)
*
* RETURN VALUES
* erp erp-pointer to the already defined error
* recovery procedure OR
* NULL if a 'new' error occurred.
*/
static struct dasd_ccw_req *
dasd_3990_erp_in_erp(struct dasd_ccw_req *cqr)
{
struct dasd_ccw_req *erp_head = cqr, /* save erp chain head */
*erp_match = NULL; /* save erp chain head */
int match = 0; /* 'boolean' for matching error found */
if (cqr->refers == NULL) { /* return if not in erp */
return NULL;
}
/* check the erp/cqr chain for current error */
do {
match = dasd_3990_erp_error_match(erp_head, cqr->refers);
erp_match = cqr; /* save possible matching erp */
cqr = cqr->refers; /* check next erp/cqr in queue */
} while ((cqr->refers != NULL) && (!match));
if (!match) {
return NULL; /* no match was found */
}
return erp_match; /* return address of matching erp */
} /* END dasd_3990_erp_in_erp */
/*
* DASD_3990_ERP_FURTHER_ERP (24 & 32 byte sense)
*
* DESCRIPTION
* No retry is left for the current ERP. Check what has to be done
* with the ERP.
* - do further defined ERP action or
* - wait for interrupt or
* - exit with permanent error
*
* PARAMETER
* erp ERP which is in progress with no retry left
*
* RETURN VALUES
* erp modified/additional ERP
*/
static struct dasd_ccw_req *
dasd_3990_erp_further_erp(struct dasd_ccw_req *erp)
{
struct dasd_device *device = erp->startdev;
char *sense = dasd_get_sense(&erp->irb);
/* check for 24 byte sense ERP */
if ((erp->function == dasd_3990_erp_bus_out) ||
(erp->function == dasd_3990_erp_action_1) ||
(erp->function == dasd_3990_erp_action_4)) {
erp = dasd_3990_erp_action_1(erp);
} else if (erp->function == dasd_3990_erp_action_1_sec) {
erp = dasd_3990_erp_action_1_sec(erp);
} else if (erp->function == dasd_3990_erp_action_5) {
/* retries have not been successful */
/* prepare erp for retry on different channel path */
erp = dasd_3990_erp_action_1(erp);
if (sense && !(sense[2] & DASD_SENSE_BIT_0)) {
/* issue a Diagnostic Control command with an
* Inhibit Write subcommand */
switch (sense[25]) {
case 0x17:
case 0x57:{ /* controller */
erp = dasd_3990_erp_DCTL(erp, 0x20);
break;
}
case 0x18:
case 0x58:{ /* channel path */
erp = dasd_3990_erp_DCTL(erp, 0x40);
break;
}
case 0x19:
case 0x59:{ /* storage director */
erp = dasd_3990_erp_DCTL(erp, 0x80);
break;
}
default:
DBF_DEV_EVENT(DBF_WARNING, device,
"invalid subcommand modifier 0x%x "
"for Diagnostic Control Command",
sense[25]);
}
}
/* check for 32 byte sense ERP */
} else if (sense &&
((erp->function == dasd_3990_erp_compound_retry) ||
(erp->function == dasd_3990_erp_compound_path) ||
(erp->function == dasd_3990_erp_compound_code) ||
(erp->function == dasd_3990_erp_compound_config))) {
erp = dasd_3990_erp_compound(erp, sense);
} else {
/*
* No retry left and no additional special handling
* necessary
*/
dev_err(&device->cdev->dev,
"ERP %p has run out of retries and failed\n", erp);
erp->status = DASD_CQR_FAILED;
}
return erp;
} /* end dasd_3990_erp_further_erp */
/*
* DASD_3990_ERP_HANDLE_MATCH_ERP
*
* DESCRIPTION
* An error occurred again and an ERP has been detected which is already
* used to handle this error (e.g. retries).
* All prior ERP's are asumed to be successful and therefore removed
* from queue.
* If retry counter of matching erp is already 0, it is checked if further
* action is needed (besides retry) or if the ERP has failed.
*
* PARAMETER
* erp_head first ERP in ERP-chain
* erp ERP that handles the actual error.
* (matching erp)
*
* RETURN VALUES
* erp modified/additional ERP
*/
static struct dasd_ccw_req *
dasd_3990_erp_handle_match_erp(struct dasd_ccw_req *erp_head,
struct dasd_ccw_req *erp)
{
struct dasd_device *device = erp_head->startdev;
struct dasd_ccw_req *erp_done = erp_head; /* finished req */
struct dasd_ccw_req *erp_free = NULL; /* req to be freed */
/* loop over successful ERPs and remove them from chanq */
while (erp_done != erp) {
if (erp_done == NULL) /* end of chain reached */
panic(PRINTK_HEADER "Programming error in ERP! The "
"original request was lost\n");
/* remove the request from the device queue */
list_del(&erp_done->blocklist);
erp_free = erp_done;
erp_done = erp_done->refers;
/* free the finished erp request */
dasd_free_erp_request(erp_free, erp_free->memdev);
} /* end while */
if (erp->retries > 0) {
char *sense = dasd_get_sense(&erp->refers->irb);
/* check for special retries */
if (sense && erp->function == dasd_3990_erp_action_4) {
erp = dasd_3990_erp_action_4(erp, sense);
} else if (sense &&
erp->function == dasd_3990_erp_action_1B_32) {
erp = dasd_3990_update_1B(erp, sense);
} else if (sense && erp->function == dasd_3990_erp_int_req) {
erp = dasd_3990_erp_int_req(erp);
} else {
/* simple retry */
DBF_DEV_EVENT(DBF_DEBUG, device,
"%i retries left for erp %p",
erp->retries, erp);
/* handle the request again... */
erp->status = DASD_CQR_FILLED;
}
} else {
/* no retry left - check for further necessary action */
/* if no further actions, handle rest as permanent error */
erp = dasd_3990_erp_further_erp(erp);
}
return erp;
} /* end dasd_3990_erp_handle_match_erp */
/*
* DASD_3990_ERP_ACTION
*
* DESCRIPTION
* control routine for 3990 erp actions.
* Has to be called with the queue lock (namely the s390_irq_lock) acquired.
*
* PARAMETER
* cqr failed cqr (either original cqr or already an erp)
*
* RETURN VALUES
* erp erp-pointer to the head of the ERP action chain.
* This means:
* - either a ptr to an additional ERP cqr or
* - the original given cqr (which's status might
* be modified)
*/
struct dasd_ccw_req *
dasd_3990_erp_action(struct dasd_ccw_req * cqr)
{
struct dasd_ccw_req *erp = NULL;
struct dasd_device *device = cqr->startdev;
struct dasd_ccw_req *temp_erp = NULL;
if (device->features & DASD_FEATURE_ERPLOG) {
/* print current erp_chain */
dev_err(&device->cdev->dev,
"ERP chain at BEGINNING of ERP-ACTION\n");
for (temp_erp = cqr;
temp_erp != NULL; temp_erp = temp_erp->refers) {
dev_err(&device->cdev->dev,
"ERP %p (%02x) refers to %p\n",
temp_erp, temp_erp->status,
temp_erp->refers);
}
}
/* double-check if current erp/cqr was successful */
if ((scsw_cstat(&cqr->irb.scsw) == 0x00) &&
(scsw_dstat(&cqr->irb.scsw) ==
(DEV_STAT_CHN_END | DEV_STAT_DEV_END))) {
DBF_DEV_EVENT(DBF_DEBUG, device,
"ERP called for successful request %p"
" - NO ERP necessary", cqr);
cqr->status = DASD_CQR_DONE;
return cqr;
}
/* check if error happened before */
erp = dasd_3990_erp_in_erp(cqr);
if (erp == NULL) {
/* no matching erp found - set up erp */
erp = dasd_3990_erp_additional_erp(cqr);
if (IS_ERR(erp))
return erp;
} else {
/* matching erp found - set all leading erp's to DONE */
erp = dasd_3990_erp_handle_match_erp(cqr, erp);
}
/*
* For path verification work we need to stick with the path that was
* originally chosen so that the per path configuration data is
* assigned correctly.
*/
if (test_bit(DASD_CQR_VERIFY_PATH, &erp->flags) && cqr->lpm) {
erp->lpm = cqr->lpm;
}
if (device->features & DASD_FEATURE_ERPLOG) {
/* print current erp_chain */
dev_err(&device->cdev->dev,
"ERP chain at END of ERP-ACTION\n");
for (temp_erp = erp;
temp_erp != NULL; temp_erp = temp_erp->refers) {
dev_err(&device->cdev->dev,
"ERP %p (%02x) refers to %p\n",
temp_erp, temp_erp->status,
temp_erp->refers);
}
}
/* enqueue ERP request if it's a new one */
if (list_empty(&erp->blocklist)) {
cqr->status = DASD_CQR_IN_ERP;
/* add erp request before the cqr */
list_add_tail(&erp->blocklist, &cqr->blocklist);
}
return erp;
} /* end dasd_3990_erp_action */