linux/fs/Makefile
David Howells 3d3c950467 netfs: Provide readahead and readpage netfs helpers
Add a pair of helper functions:

 (*) netfs_readahead()
 (*) netfs_readpage()

to do the work of handling a readahead or a readpage, where the page(s)
that form part of the request may be split between the local cache, the
server or just require clearing, and may be single pages and transparent
huge pages.  This is all handled within the helper.

Note that while both will read from the cache if there is data present,
only netfs_readahead() will expand the request beyond what it was asked to
do, and only netfs_readahead() will write back to the cache.

netfs_readpage(), on the other hand, is synchronous and only fetches the
page (which might be a THP) it is asked for.

The netfs gives the helper parameters from the VM, the cache cookie it
wants to use (or NULL) and a table of operations (only one of which is
mandatory):

 (*) expand_readahead() [optional]

     Called to allow the netfs to request an expansion of a readahead
     request to meet its own alignment requirements.  This is done by
     changing rreq->start and rreq->len.

 (*) clamp_length() [optional]

     Called to allow the netfs to cut down a subrequest to meet its own
     boundary requirements.  If it does this, the helper will generate
     additional subrequests until the full request is satisfied.

 (*) is_still_valid() [optional]

     Called to find out if the data just read from the cache has been
     invalidated and must be reread from the server.

 (*) issue_op() [required]

     Called to ask the netfs to issue a read to the server.  The subrequest
     describes the read.  The read request holds information about the file
     being accessed.

     The netfs can cache information in rreq->netfs_priv.

     Upon completion, the netfs should set the error, transferred and can
     also set FSCACHE_SREQ_CLEAR_TAIL and then call
     fscache_subreq_terminated().

 (*) done() [optional]

     Called after the pages have been unlocked.  The read request is still
     pinning the file and mapping and may still be pinning pages with
     PG_fscache.  rreq->error indicates any error that has been
     accumulated.

 (*) cleanup() [optional]

     Called when the helper is disposing of a finished read request.  This
     allows the netfs to clear rreq->netfs_priv.

Netfs support is enabled with CONFIG_NETFS_SUPPORT=y.  It will be built
even if CONFIG_FSCACHE=n and in this case much of it should be optimised
away, allowing the filesystem to use it even when caching is disabled.

Changes:
v5:
 - Comment why netfs_readahead() is putting pages[2].
 - Use page_file_mapping() rather than page->mapping[2].
 - Use page_index() rather than page->index[2].
 - Use set_page_fscache()[3] rather then SetPageFsCache() as this takes an
   appropriate ref too[4].

v4:
 - Folded in a kerneldoc comment fix.
 - Folded in a fix for the error handling in the case that ENOMEM occurs.
 - Added flag to netfs_subreq_terminated() to indicate that the caller may
   have been running async and stuff that might sleep needs punting to a
   workqueue (can't use in_softirq()[1]).

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-mm@kvack.org
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1]
Link: https://lore.kernel.org/r/20210321014202.GF3420@casper.infradead.org/ [2]
Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [3]
Link: https://lore.kernel.org/r/CAHk-=wh+2gbF7XEjYc=HV9w_2uVzVf7vs60BPz0gFA=+pUm3ww@mail.gmail.com/ [4]
Link: https://lore.kernel.org/r/160588497406.3465195.18003475695899726222.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118136849.1232039.8923686136144228724.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161032290.2537118.13400578415247339173.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340394873.1303470.6237319335883242536.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539537375.286939.16642940088716990995.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653795430.2770958.4947584573720000554.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789076581.6155.6745849361504760209.stgit@warthog.procyon.org.uk/ # v6
2021-04-23 10:14:32 +01:00

139 lines
4.5 KiB
Makefile

# SPDX-License-Identifier: GPL-2.0
#
# Makefile for the Linux filesystems.
#
# 14 Sep 2000, Christoph Hellwig <hch@infradead.org>
# Rewritten to use lists instead of if-statements.
#
obj-y := open.o read_write.o file_table.o super.o \
char_dev.o stat.o exec.o pipe.o namei.o fcntl.o \
ioctl.o readdir.o select.o dcache.o inode.o \
attr.o bad_inode.o file.o filesystems.o namespace.o \
seq_file.o xattr.o libfs.o fs-writeback.o \
pnode.o splice.o sync.o utimes.o d_path.o \
stack.o fs_struct.o statfs.o fs_pin.o nsfs.o \
fs_types.o fs_context.o fs_parser.o fsopen.o init.o \
kernel_read_file.o remap_range.o
ifeq ($(CONFIG_BLOCK),y)
obj-y += buffer.o block_dev.o direct-io.o mpage.o
else
obj-y += no-block.o
endif
obj-$(CONFIG_PROC_FS) += proc_namespace.o
obj-y += notify/
obj-$(CONFIG_EPOLL) += eventpoll.o
obj-y += anon_inodes.o
obj-$(CONFIG_SIGNALFD) += signalfd.o
obj-$(CONFIG_TIMERFD) += timerfd.o
obj-$(CONFIG_EVENTFD) += eventfd.o
obj-$(CONFIG_USERFAULTFD) += userfaultfd.o
obj-$(CONFIG_AIO) += aio.o
obj-$(CONFIG_IO_URING) += io_uring.o
obj-$(CONFIG_IO_WQ) += io-wq.o
obj-$(CONFIG_FS_DAX) += dax.o
obj-$(CONFIG_FS_ENCRYPTION) += crypto/
obj-$(CONFIG_FS_VERITY) += verity/
obj-$(CONFIG_FILE_LOCKING) += locks.o
obj-$(CONFIG_BINFMT_AOUT) += binfmt_aout.o
obj-$(CONFIG_BINFMT_EM86) += binfmt_em86.o
obj-$(CONFIG_BINFMT_MISC) += binfmt_misc.o
obj-$(CONFIG_BINFMT_SCRIPT) += binfmt_script.o
obj-$(CONFIG_BINFMT_ELF) += binfmt_elf.o
obj-$(CONFIG_COMPAT_BINFMT_ELF) += compat_binfmt_elf.o
obj-$(CONFIG_BINFMT_ELF_FDPIC) += binfmt_elf_fdpic.o
obj-$(CONFIG_BINFMT_FLAT) += binfmt_flat.o
obj-$(CONFIG_FS_MBCACHE) += mbcache.o
obj-$(CONFIG_FS_POSIX_ACL) += posix_acl.o
obj-$(CONFIG_NFS_COMMON) += nfs_common/
obj-$(CONFIG_COREDUMP) += coredump.o
obj-$(CONFIG_SYSCTL) += drop_caches.o
obj-$(CONFIG_FHANDLE) += fhandle.o
obj-y += iomap/
obj-y += quota/
obj-$(CONFIG_PROC_FS) += proc/
obj-$(CONFIG_KERNFS) += kernfs/
obj-$(CONFIG_SYSFS) += sysfs/
obj-$(CONFIG_CONFIGFS_FS) += configfs/
obj-y += devpts/
obj-$(CONFIG_DLM) += dlm/
# Do not add any filesystems before this line
obj-$(CONFIG_NETFS_SUPPORT) += netfs/
obj-$(CONFIG_FSCACHE) += fscache/
obj-$(CONFIG_REISERFS_FS) += reiserfs/
obj-$(CONFIG_EXT4_FS) += ext4/
# We place ext4 before ext2 so that clean ext3 root fs's do NOT mount using the
# ext2 driver, which doesn't know about journalling! Explicitly request ext2
# by giving the rootfstype= parameter.
obj-$(CONFIG_EXT2_FS) += ext2/
obj-$(CONFIG_JBD2) += jbd2/
obj-$(CONFIG_CRAMFS) += cramfs/
obj-$(CONFIG_SQUASHFS) += squashfs/
obj-y += ramfs/
obj-$(CONFIG_HUGETLBFS) += hugetlbfs/
obj-$(CONFIG_CODA_FS) += coda/
obj-$(CONFIG_MINIX_FS) += minix/
obj-$(CONFIG_FAT_FS) += fat/
obj-$(CONFIG_EXFAT_FS) += exfat/
obj-$(CONFIG_BFS_FS) += bfs/
obj-$(CONFIG_ISO9660_FS) += isofs/
obj-$(CONFIG_HFSPLUS_FS) += hfsplus/ # Before hfs to find wrapped HFS+
obj-$(CONFIG_HFS_FS) += hfs/
obj-$(CONFIG_ECRYPT_FS) += ecryptfs/
obj-$(CONFIG_VXFS_FS) += freevxfs/
obj-$(CONFIG_NFS_FS) += nfs/
obj-$(CONFIG_EXPORTFS) += exportfs/
obj-$(CONFIG_NFSD) += nfsd/
obj-$(CONFIG_LOCKD) += lockd/
obj-$(CONFIG_NLS) += nls/
obj-$(CONFIG_UNICODE) += unicode/
obj-$(CONFIG_SYSV_FS) += sysv/
obj-$(CONFIG_CIFS) += cifs/
obj-$(CONFIG_HPFS_FS) += hpfs/
obj-$(CONFIG_NTFS_FS) += ntfs/
obj-$(CONFIG_UFS_FS) += ufs/
obj-$(CONFIG_EFS_FS) += efs/
obj-$(CONFIG_JFFS2_FS) += jffs2/
obj-$(CONFIG_UBIFS_FS) += ubifs/
obj-$(CONFIG_AFFS_FS) += affs/
obj-$(CONFIG_ROMFS_FS) += romfs/
obj-$(CONFIG_QNX4FS_FS) += qnx4/
obj-$(CONFIG_QNX6FS_FS) += qnx6/
obj-$(CONFIG_AUTOFS_FS) += autofs/
obj-$(CONFIG_ADFS_FS) += adfs/
obj-$(CONFIG_FUSE_FS) += fuse/
obj-$(CONFIG_OVERLAY_FS) += overlayfs/
obj-$(CONFIG_ORANGEFS_FS) += orangefs/
obj-$(CONFIG_UDF_FS) += udf/
obj-$(CONFIG_SUN_OPENPROMFS) += openpromfs/
obj-$(CONFIG_OMFS_FS) += omfs/
obj-$(CONFIG_JFS_FS) += jfs/
obj-$(CONFIG_XFS_FS) += xfs/
obj-$(CONFIG_9P_FS) += 9p/
obj-$(CONFIG_AFS_FS) += afs/
obj-$(CONFIG_NILFS2_FS) += nilfs2/
obj-$(CONFIG_BEFS_FS) += befs/
obj-$(CONFIG_HOSTFS) += hostfs/
obj-$(CONFIG_CACHEFILES) += cachefiles/
obj-$(CONFIG_DEBUG_FS) += debugfs/
obj-$(CONFIG_TRACING) += tracefs/
obj-$(CONFIG_OCFS2_FS) += ocfs2/
obj-$(CONFIG_BTRFS_FS) += btrfs/
obj-$(CONFIG_GFS2_FS) += gfs2/
obj-$(CONFIG_F2FS_FS) += f2fs/
obj-$(CONFIG_CEPH_FS) += ceph/
obj-$(CONFIG_PSTORE) += pstore/
obj-$(CONFIG_EFIVAR_FS) += efivarfs/
obj-$(CONFIG_EROFS_FS) += erofs/
obj-$(CONFIG_VBOXSF_FS) += vboxsf/
obj-$(CONFIG_ZONEFS_FS) += zonefs/