linux/arch/arm/mach-s3c2410/cpu-freq.c
Ben Dooks e6d197a695 ARM: S3C: CPUFREQ: Add debugfs support for cpufreq
Add debugfs support for the cpufreq driver to allow
information about the system state to be exported to
the user.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30 23:22:56 +01:00

160 lines
3.6 KiB
C

/* linux/arch/arm/mach-s3c2410/cpu-freq.c
*
* Copyright (c) 2006,2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 CPU Frequency scaling
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/cpufreq.h>
#include <linux/sysdev.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/regs-clock.h>
#include <plat/cpu.h>
#include <plat/clock.h>
#include <plat/cpu-freq-core.h>
/* Note, 2410A has an extra mode for 1:4:4 ratio, bit 2 of CLKDIV */
static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
{
u32 clkdiv = 0;
if (cfg->divs.h_divisor == 2)
clkdiv |= S3C2410_CLKDIVN_HDIVN;
if (cfg->divs.p_divisor != cfg->divs.h_divisor)
clkdiv |= S3C2410_CLKDIVN_PDIVN;
__raw_writel(clkdiv, S3C2410_CLKDIVN);
}
static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
{
unsigned long hclk, fclk, pclk;
unsigned int hdiv, pdiv;
unsigned long hclk_max;
fclk = cfg->freq.fclk;
hclk_max = cfg->max.hclk;
cfg->freq.armclk = fclk;
s3c_freq_dbg("%s: fclk is %lu, max hclk %lu\n",
__func__, fclk, hclk_max);
hdiv = (fclk > cfg->max.hclk) ? 2 : 1;
hclk = fclk / hdiv;
if (hclk > cfg->max.hclk) {
s3c_freq_dbg("%s: hclk too big\n", __func__);
return -EINVAL;
}
pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
pclk = hclk / pdiv;
if (pclk > cfg->max.pclk) {
s3c_freq_dbg("%s: pclk too big\n", __func__);
return -EINVAL;
}
pdiv *= hdiv;
/* record the result */
cfg->divs.p_divisor = pdiv;
cfg->divs.h_divisor = hdiv;
return 0 ;
}
static struct s3c_cpufreq_info s3c2410_cpufreq_info = {
.max = {
.fclk = 200000000,
.hclk = 100000000,
.pclk = 50000000,
},
/* transition latency is about 5ms worst-case, so
* set 10ms to be sure */
.latency = 10000000,
.locktime_m = 150,
.locktime_u = 150,
.locktime_bits = 12,
.need_pll = 1,
.name = "s3c2410",
.calc_iotiming = s3c2410_iotiming_calc,
.set_iotiming = s3c2410_iotiming_set,
.get_iotiming = s3c2410_iotiming_get,
.resume_clocks = s3c2410_setup_clocks,
.set_fvco = s3c2410_set_fvco,
.set_refresh = s3c2410_cpufreq_setrefresh,
.set_divs = s3c2410_cpufreq_setdivs,
.calc_divs = s3c2410_cpufreq_calcdivs,
.debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
};
static int s3c2410_cpufreq_add(struct sys_device *sysdev)
{
return s3c_cpufreq_register(&s3c2410_cpufreq_info);
}
static struct sysdev_driver s3c2410_cpufreq_driver = {
.add = s3c2410_cpufreq_add,
};
static int __init s3c2410_cpufreq_init(void)
{
return sysdev_driver_register(&s3c2410_sysclass,
&s3c2410_cpufreq_driver);
}
arch_initcall(s3c2410_cpufreq_init);
static int s3c2410a_cpufreq_add(struct sys_device *sysdev)
{
/* alter the maximum freq settings for S3C2410A. If a board knows
* it only has a maximum of 200, then it should register its own
* limits. */
s3c2410_cpufreq_info.max.fclk = 266000000;
s3c2410_cpufreq_info.max.hclk = 133000000;
s3c2410_cpufreq_info.max.pclk = 66500000;
s3c2410_cpufreq_info.name = "s3c2410a";
return s3c2410_cpufreq_add(sysdev);
}
static struct sysdev_driver s3c2410a_cpufreq_driver = {
.add = s3c2410a_cpufreq_add,
};
static int __init s3c2410a_cpufreq_init(void)
{
return sysdev_driver_register(&s3c2410a_sysclass,
&s3c2410a_cpufreq_driver);
}
arch_initcall(s3c2410a_cpufreq_init);