linux/drivers/misc/c2port/core.c
Geert Uytterhoeven fb75109834 misc: C2port needs <linux/sched.h>
m68k allmodconfig:

| drivers/misc/c2port/core.c: In function 'c2port_reset':
| drivers/misc/c2port/core.c:73: error: dereferencing pointer to incomplete type
| drivers/misc/c2port/core.c: In function 'c2port_strobe_ck':
| drivers/misc/c2port/core.c:91: error: dereferencing pointer to incomplete type

Include <linux/sched.h> to fix it, as m68k's local_irq_enable() needs to know
about struct task_struct.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-15 11:36:06 -08:00

1004 lines
21 KiB
C

/*
* Silicon Labs C2 port core Linux support
*
* Copyright (c) 2007 Rodolfo Giometti <giometti@linux.it>
* Copyright (c) 2007 Eurotech S.p.A. <info@eurotech.it>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/kernel.h>
#include <linux/ctype.h>
#include <linux/delay.h>
#include <linux/idr.h>
#include <linux/sched.h>
#include <linux/c2port.h>
#define DRIVER_NAME "c2port"
#define DRIVER_VERSION "0.51.0"
static DEFINE_SPINLOCK(c2port_idr_lock);
static DEFINE_IDR(c2port_idr);
/*
* Local variables
*/
static struct class *c2port_class;
/*
* C2 registers & commands defines
*/
/* C2 registers */
#define C2PORT_DEVICEID 0x00
#define C2PORT_REVID 0x01
#define C2PORT_FPCTL 0x02
#define C2PORT_FPDAT 0xB4
/* C2 interface commands */
#define C2PORT_GET_VERSION 0x01
#define C2PORT_DEVICE_ERASE 0x03
#define C2PORT_BLOCK_READ 0x06
#define C2PORT_BLOCK_WRITE 0x07
#define C2PORT_PAGE_ERASE 0x08
/* C2 status return codes */
#define C2PORT_INVALID_COMMAND 0x00
#define C2PORT_COMMAND_FAILED 0x02
#define C2PORT_COMMAND_OK 0x0d
/*
* C2 port low level signal managements
*/
static void c2port_reset(struct c2port_device *dev)
{
struct c2port_ops *ops = dev->ops;
/* To reset the device we have to keep clock line low for at least
* 20us.
*/
local_irq_disable();
ops->c2ck_set(dev, 0);
udelay(25);
ops->c2ck_set(dev, 1);
local_irq_enable();
udelay(1);
}
static void c2port_strobe_ck(struct c2port_device *dev)
{
struct c2port_ops *ops = dev->ops;
/* During hi-low-hi transition we disable local IRQs to avoid
* interructions since C2 port specification says that it must be
* shorter than 5us, otherwise the microcontroller may consider
* it as a reset signal!
*/
local_irq_disable();
ops->c2ck_set(dev, 0);
udelay(1);
ops->c2ck_set(dev, 1);
local_irq_enable();
udelay(1);
}
/*
* C2 port basic functions
*/
static void c2port_write_ar(struct c2port_device *dev, u8 addr)
{
struct c2port_ops *ops = dev->ops;
int i;
/* START field */
c2port_strobe_ck(dev);
/* INS field (11b, LSB first) */
ops->c2d_dir(dev, 0);
ops->c2d_set(dev, 1);
c2port_strobe_ck(dev);
ops->c2d_set(dev, 1);
c2port_strobe_ck(dev);
/* ADDRESS field */
for (i = 0; i < 8; i++) {
ops->c2d_set(dev, addr & 0x01);
c2port_strobe_ck(dev);
addr >>= 1;
}
/* STOP field */
ops->c2d_dir(dev, 1);
c2port_strobe_ck(dev);
}
static int c2port_read_ar(struct c2port_device *dev, u8 *addr)
{
struct c2port_ops *ops = dev->ops;
int i;
/* START field */
c2port_strobe_ck(dev);
/* INS field (10b, LSB first) */
ops->c2d_dir(dev, 0);
ops->c2d_set(dev, 0);
c2port_strobe_ck(dev);
ops->c2d_set(dev, 1);
c2port_strobe_ck(dev);
/* ADDRESS field */
ops->c2d_dir(dev, 1);
*addr = 0;
for (i = 0; i < 8; i++) {
*addr >>= 1; /* shift in 8-bit ADDRESS field LSB first */
c2port_strobe_ck(dev);
if (ops->c2d_get(dev))
*addr |= 0x80;
}
/* STOP field */
c2port_strobe_ck(dev);
return 0;
}
static int c2port_write_dr(struct c2port_device *dev, u8 data)
{
struct c2port_ops *ops = dev->ops;
int timeout, i;
/* START field */
c2port_strobe_ck(dev);
/* INS field (01b, LSB first) */
ops->c2d_dir(dev, 0);
ops->c2d_set(dev, 1);
c2port_strobe_ck(dev);
ops->c2d_set(dev, 0);
c2port_strobe_ck(dev);
/* LENGTH field (00b, LSB first -> 1 byte) */
ops->c2d_set(dev, 0);
c2port_strobe_ck(dev);
ops->c2d_set(dev, 0);
c2port_strobe_ck(dev);
/* DATA field */
for (i = 0; i < 8; i++) {
ops->c2d_set(dev, data & 0x01);
c2port_strobe_ck(dev);
data >>= 1;
}
/* WAIT field */
ops->c2d_dir(dev, 1);
timeout = 20;
do {
c2port_strobe_ck(dev);
if (ops->c2d_get(dev))
break;
udelay(1);
} while (--timeout > 0);
if (timeout == 0)
return -EIO;
/* STOP field */
c2port_strobe_ck(dev);
return 0;
}
static int c2port_read_dr(struct c2port_device *dev, u8 *data)
{
struct c2port_ops *ops = dev->ops;
int timeout, i;
/* START field */
c2port_strobe_ck(dev);
/* INS field (00b, LSB first) */
ops->c2d_dir(dev, 0);
ops->c2d_set(dev, 0);
c2port_strobe_ck(dev);
ops->c2d_set(dev, 0);
c2port_strobe_ck(dev);
/* LENGTH field (00b, LSB first -> 1 byte) */
ops->c2d_set(dev, 0);
c2port_strobe_ck(dev);
ops->c2d_set(dev, 0);
c2port_strobe_ck(dev);
/* WAIT field */
ops->c2d_dir(dev, 1);
timeout = 20;
do {
c2port_strobe_ck(dev);
if (ops->c2d_get(dev))
break;
udelay(1);
} while (--timeout > 0);
if (timeout == 0)
return -EIO;
/* DATA field */
*data = 0;
for (i = 0; i < 8; i++) {
*data >>= 1; /* shift in 8-bit DATA field LSB first */
c2port_strobe_ck(dev);
if (ops->c2d_get(dev))
*data |= 0x80;
}
/* STOP field */
c2port_strobe_ck(dev);
return 0;
}
static int c2port_poll_in_busy(struct c2port_device *dev)
{
u8 addr;
int ret, timeout = 20;
do {
ret = (c2port_read_ar(dev, &addr));
if (ret < 0)
return -EIO;
if (!(addr & 0x02))
break;
udelay(1);
} while (--timeout > 0);
if (timeout == 0)
return -EIO;
return 0;
}
static int c2port_poll_out_ready(struct c2port_device *dev)
{
u8 addr;
int ret, timeout = 10000; /* erase flash needs long time... */
do {
ret = (c2port_read_ar(dev, &addr));
if (ret < 0)
return -EIO;
if (addr & 0x01)
break;
udelay(1);
} while (--timeout > 0);
if (timeout == 0)
return -EIO;
return 0;
}
/*
* sysfs methods
*/
static ssize_t c2port_show_name(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct c2port_device *c2dev = dev_get_drvdata(dev);
return sprintf(buf, "%s\n", c2dev->name);
}
static ssize_t c2port_show_flash_blocks_num(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct c2port_device *c2dev = dev_get_drvdata(dev);
struct c2port_ops *ops = c2dev->ops;
return sprintf(buf, "%d\n", ops->blocks_num);
}
static ssize_t c2port_show_flash_block_size(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct c2port_device *c2dev = dev_get_drvdata(dev);
struct c2port_ops *ops = c2dev->ops;
return sprintf(buf, "%d\n", ops->block_size);
}
static ssize_t c2port_show_flash_size(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct c2port_device *c2dev = dev_get_drvdata(dev);
struct c2port_ops *ops = c2dev->ops;
return sprintf(buf, "%d\n", ops->blocks_num * ops->block_size);
}
static ssize_t c2port_show_access(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct c2port_device *c2dev = dev_get_drvdata(dev);
return sprintf(buf, "%d\n", c2dev->access);
}
static ssize_t c2port_store_access(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct c2port_device *c2dev = dev_get_drvdata(dev);
struct c2port_ops *ops = c2dev->ops;
int status, ret;
ret = sscanf(buf, "%d", &status);
if (ret != 1)
return -EINVAL;
mutex_lock(&c2dev->mutex);
c2dev->access = !!status;
/* If access is "on" clock should be HIGH _before_ setting the line
* as output and data line should be set as INPUT anyway */
if (c2dev->access)
ops->c2ck_set(c2dev, 1);
ops->access(c2dev, c2dev->access);
if (c2dev->access)
ops->c2d_dir(c2dev, 1);
mutex_unlock(&c2dev->mutex);
return count;
}
static ssize_t c2port_store_reset(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct c2port_device *c2dev = dev_get_drvdata(dev);
/* Check the device access status */
if (!c2dev->access)
return -EBUSY;
mutex_lock(&c2dev->mutex);
c2port_reset(c2dev);
c2dev->flash_access = 0;
mutex_unlock(&c2dev->mutex);
return count;
}
static ssize_t __c2port_show_dev_id(struct c2port_device *dev, char *buf)
{
u8 data;
int ret;
/* Select DEVICEID register for C2 data register accesses */
c2port_write_ar(dev, C2PORT_DEVICEID);
/* Read and return the device ID register */
ret = c2port_read_dr(dev, &data);
if (ret < 0)
return ret;
return sprintf(buf, "%d\n", data);
}
static ssize_t c2port_show_dev_id(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct c2port_device *c2dev = dev_get_drvdata(dev);
ssize_t ret;
/* Check the device access status */
if (!c2dev->access)
return -EBUSY;
mutex_lock(&c2dev->mutex);
ret = __c2port_show_dev_id(c2dev, buf);
mutex_unlock(&c2dev->mutex);
if (ret < 0)
dev_err(dev, "cannot read from %s\n", c2dev->name);
return ret;
}
static ssize_t __c2port_show_rev_id(struct c2port_device *dev, char *buf)
{
u8 data;
int ret;
/* Select REVID register for C2 data register accesses */
c2port_write_ar(dev, C2PORT_REVID);
/* Read and return the revision ID register */
ret = c2port_read_dr(dev, &data);
if (ret < 0)
return ret;
return sprintf(buf, "%d\n", data);
}
static ssize_t c2port_show_rev_id(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct c2port_device *c2dev = dev_get_drvdata(dev);
ssize_t ret;
/* Check the device access status */
if (!c2dev->access)
return -EBUSY;
mutex_lock(&c2dev->mutex);
ret = __c2port_show_rev_id(c2dev, buf);
mutex_unlock(&c2dev->mutex);
if (ret < 0)
dev_err(c2dev->dev, "cannot read from %s\n", c2dev->name);
return ret;
}
static ssize_t c2port_show_flash_access(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct c2port_device *c2dev = dev_get_drvdata(dev);
return sprintf(buf, "%d\n", c2dev->flash_access);
}
static ssize_t __c2port_store_flash_access(struct c2port_device *dev,
int status)
{
int ret;
/* Check the device access status */
if (!dev->access)
return -EBUSY;
dev->flash_access = !!status;
/* If flash_access is off we have nothing to do... */
if (dev->flash_access == 0)
return 0;
/* Target the C2 flash programming control register for C2 data
* register access */
c2port_write_ar(dev, C2PORT_FPCTL);
/* Write the first keycode to enable C2 Flash programming */
ret = c2port_write_dr(dev, 0x02);
if (ret < 0)
return ret;
/* Write the second keycode to enable C2 Flash programming */
ret = c2port_write_dr(dev, 0x01);
if (ret < 0)
return ret;
/* Delay for at least 20ms to ensure the target is ready for
* C2 flash programming */
mdelay(25);
return 0;
}
static ssize_t c2port_store_flash_access(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct c2port_device *c2dev = dev_get_drvdata(dev);
int status;
ssize_t ret;
ret = sscanf(buf, "%d", &status);
if (ret != 1)
return -EINVAL;
mutex_lock(&c2dev->mutex);
ret = __c2port_store_flash_access(c2dev, status);
mutex_unlock(&c2dev->mutex);
if (ret < 0) {
dev_err(c2dev->dev, "cannot enable %s flash programming\n",
c2dev->name);
return ret;
}
return count;
}
static ssize_t __c2port_write_flash_erase(struct c2port_device *dev)
{
u8 status;
int ret;
/* Target the C2 flash programming data register for C2 data register
* access.
*/
c2port_write_ar(dev, C2PORT_FPDAT);
/* Send device erase command */
c2port_write_dr(dev, C2PORT_DEVICE_ERASE);
/* Wait for input acknowledge */
ret = c2port_poll_in_busy(dev);
if (ret < 0)
return ret;
/* Should check status before starting FLASH access sequence */
/* Wait for status information */
ret = c2port_poll_out_ready(dev);
if (ret < 0)
return ret;
/* Read flash programming interface status */
ret = c2port_read_dr(dev, &status);
if (ret < 0)
return ret;
if (status != C2PORT_COMMAND_OK)
return -EBUSY;
/* Send a three-byte arming sequence to enable the device erase.
* If the sequence is not received correctly, the command will be
* ignored.
* Sequence is: 0xde, 0xad, 0xa5.
*/
c2port_write_dr(dev, 0xde);
ret = c2port_poll_in_busy(dev);
if (ret < 0)
return ret;
c2port_write_dr(dev, 0xad);
ret = c2port_poll_in_busy(dev);
if (ret < 0)
return ret;
c2port_write_dr(dev, 0xa5);
ret = c2port_poll_in_busy(dev);
if (ret < 0)
return ret;
ret = c2port_poll_out_ready(dev);
if (ret < 0)
return ret;
return 0;
}
static ssize_t c2port_store_flash_erase(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct c2port_device *c2dev = dev_get_drvdata(dev);
int ret;
/* Check the device and flash access status */
if (!c2dev->access || !c2dev->flash_access)
return -EBUSY;
mutex_lock(&c2dev->mutex);
ret = __c2port_write_flash_erase(c2dev);
mutex_unlock(&c2dev->mutex);
if (ret < 0) {
dev_err(c2dev->dev, "cannot erase %s flash\n", c2dev->name);
return ret;
}
return count;
}
static ssize_t __c2port_read_flash_data(struct c2port_device *dev,
char *buffer, loff_t offset, size_t count)
{
struct c2port_ops *ops = dev->ops;
u8 status, nread = 128;
int i, ret;
/* Check for flash end */
if (offset >= ops->block_size * ops->blocks_num)
return 0;
if (ops->block_size * ops->blocks_num - offset < nread)
nread = ops->block_size * ops->blocks_num - offset;
if (count < nread)
nread = count;
if (nread == 0)
return nread;
/* Target the C2 flash programming data register for C2 data register
* access */
c2port_write_ar(dev, C2PORT_FPDAT);
/* Send flash block read command */
c2port_write_dr(dev, C2PORT_BLOCK_READ);
/* Wait for input acknowledge */
ret = c2port_poll_in_busy(dev);
if (ret < 0)
return ret;
/* Should check status before starting FLASH access sequence */
/* Wait for status information */
ret = c2port_poll_out_ready(dev);
if (ret < 0)
return ret;
/* Read flash programming interface status */
ret = c2port_read_dr(dev, &status);
if (ret < 0)
return ret;
if (status != C2PORT_COMMAND_OK)
return -EBUSY;
/* Send address high byte */
c2port_write_dr(dev, offset >> 8);
ret = c2port_poll_in_busy(dev);
if (ret < 0)
return ret;
/* Send address low byte */
c2port_write_dr(dev, offset & 0x00ff);
ret = c2port_poll_in_busy(dev);
if (ret < 0)
return ret;
/* Send address block size */
c2port_write_dr(dev, nread);
ret = c2port_poll_in_busy(dev);
if (ret < 0)
return ret;
/* Should check status before reading FLASH block */
/* Wait for status information */
ret = c2port_poll_out_ready(dev);
if (ret < 0)
return ret;
/* Read flash programming interface status */
ret = c2port_read_dr(dev, &status);
if (ret < 0)
return ret;
if (status != C2PORT_COMMAND_OK)
return -EBUSY;
/* Read flash block */
for (i = 0; i < nread; i++) {
ret = c2port_poll_out_ready(dev);
if (ret < 0)
return ret;
ret = c2port_read_dr(dev, buffer+i);
if (ret < 0)
return ret;
}
return nread;
}
static ssize_t c2port_read_flash_data(struct kobject *kobj,
struct bin_attribute *attr,
char *buffer, loff_t offset, size_t count)
{
struct c2port_device *c2dev =
dev_get_drvdata(container_of(kobj,
struct device, kobj));
ssize_t ret;
/* Check the device and flash access status */
if (!c2dev->access || !c2dev->flash_access)
return -EBUSY;
mutex_lock(&c2dev->mutex);
ret = __c2port_read_flash_data(c2dev, buffer, offset, count);
mutex_unlock(&c2dev->mutex);
if (ret < 0)
dev_err(c2dev->dev, "cannot read %s flash\n", c2dev->name);
return ret;
}
static ssize_t __c2port_write_flash_data(struct c2port_device *dev,
char *buffer, loff_t offset, size_t count)
{
struct c2port_ops *ops = dev->ops;
u8 status, nwrite = 128;
int i, ret;
if (nwrite > count)
nwrite = count;
if (ops->block_size * ops->blocks_num - offset < nwrite)
nwrite = ops->block_size * ops->blocks_num - offset;
/* Check for flash end */
if (offset >= ops->block_size * ops->blocks_num)
return -EINVAL;
/* Target the C2 flash programming data register for C2 data register
* access */
c2port_write_ar(dev, C2PORT_FPDAT);
/* Send flash block write command */
c2port_write_dr(dev, C2PORT_BLOCK_WRITE);
/* Wait for input acknowledge */
ret = c2port_poll_in_busy(dev);
if (ret < 0)
return ret;
/* Should check status before starting FLASH access sequence */
/* Wait for status information */
ret = c2port_poll_out_ready(dev);
if (ret < 0)
return ret;
/* Read flash programming interface status */
ret = c2port_read_dr(dev, &status);
if (ret < 0)
return ret;
if (status != C2PORT_COMMAND_OK)
return -EBUSY;
/* Send address high byte */
c2port_write_dr(dev, offset >> 8);
ret = c2port_poll_in_busy(dev);
if (ret < 0)
return ret;
/* Send address low byte */
c2port_write_dr(dev, offset & 0x00ff);
ret = c2port_poll_in_busy(dev);
if (ret < 0)
return ret;
/* Send address block size */
c2port_write_dr(dev, nwrite);
ret = c2port_poll_in_busy(dev);
if (ret < 0)
return ret;
/* Should check status before writing FLASH block */
/* Wait for status information */
ret = c2port_poll_out_ready(dev);
if (ret < 0)
return ret;
/* Read flash programming interface status */
ret = c2port_read_dr(dev, &status);
if (ret < 0)
return ret;
if (status != C2PORT_COMMAND_OK)
return -EBUSY;
/* Write flash block */
for (i = 0; i < nwrite; i++) {
ret = c2port_write_dr(dev, *(buffer+i));
if (ret < 0)
return ret;
ret = c2port_poll_in_busy(dev);
if (ret < 0)
return ret;
}
/* Wait for last flash write to complete */
ret = c2port_poll_out_ready(dev);
if (ret < 0)
return ret;
return nwrite;
}
static ssize_t c2port_write_flash_data(struct kobject *kobj,
struct bin_attribute *attr,
char *buffer, loff_t offset, size_t count)
{
struct c2port_device *c2dev =
dev_get_drvdata(container_of(kobj,
struct device, kobj));
int ret;
/* Check the device access status */
if (!c2dev->access || !c2dev->flash_access)
return -EBUSY;
mutex_lock(&c2dev->mutex);
ret = __c2port_write_flash_data(c2dev, buffer, offset, count);
mutex_unlock(&c2dev->mutex);
if (ret < 0)
dev_err(c2dev->dev, "cannot write %s flash\n", c2dev->name);
return ret;
}
/*
* Class attributes
*/
static struct device_attribute c2port_attrs[] = {
__ATTR(name, 0444, c2port_show_name, NULL),
__ATTR(flash_blocks_num, 0444, c2port_show_flash_blocks_num, NULL),
__ATTR(flash_block_size, 0444, c2port_show_flash_block_size, NULL),
__ATTR(flash_size, 0444, c2port_show_flash_size, NULL),
__ATTR(access, 0644, c2port_show_access, c2port_store_access),
__ATTR(reset, 0200, NULL, c2port_store_reset),
__ATTR(dev_id, 0444, c2port_show_dev_id, NULL),
__ATTR(rev_id, 0444, c2port_show_rev_id, NULL),
__ATTR(flash_access, 0644, c2port_show_flash_access,
c2port_store_flash_access),
__ATTR(flash_erase, 0200, NULL, c2port_store_flash_erase),
__ATTR_NULL,
};
static struct bin_attribute c2port_bin_attrs = {
.attr = {
.name = "flash_data",
.mode = 0644
},
.read = c2port_read_flash_data,
.write = c2port_write_flash_data,
/* .size is computed at run-time */
};
/*
* Exported functions
*/
struct c2port_device *c2port_device_register(char *name,
struct c2port_ops *ops, void *devdata)
{
struct c2port_device *c2dev;
int id, ret;
if (unlikely(!ops) || unlikely(!ops->access) || \
unlikely(!ops->c2d_dir) || unlikely(!ops->c2ck_set) || \
unlikely(!ops->c2d_get) || unlikely(!ops->c2d_set))
return ERR_PTR(-EINVAL);
c2dev = kmalloc(sizeof(struct c2port_device), GFP_KERNEL);
if (unlikely(!c2dev))
return ERR_PTR(-ENOMEM);
ret = idr_pre_get(&c2port_idr, GFP_KERNEL);
if (!ret) {
ret = -ENOMEM;
goto error_idr_get_new;
}
spin_lock_irq(&c2port_idr_lock);
ret = idr_get_new(&c2port_idr, c2dev, &id);
spin_unlock_irq(&c2port_idr_lock);
if (ret < 0)
goto error_idr_get_new;
c2dev->id = id;
c2dev->dev = device_create(c2port_class, NULL, 0, c2dev,
"c2port%d", id);
if (unlikely(!c2dev->dev)) {
ret = -ENOMEM;
goto error_device_create;
}
dev_set_drvdata(c2dev->dev, c2dev);
strncpy(c2dev->name, name, C2PORT_NAME_LEN);
c2dev->ops = ops;
mutex_init(&c2dev->mutex);
/* Create binary file */
c2port_bin_attrs.size = ops->blocks_num * ops->block_size;
ret = device_create_bin_file(c2dev->dev, &c2port_bin_attrs);
if (unlikely(ret))
goto error_device_create_bin_file;
/* By default C2 port access is off */
c2dev->access = c2dev->flash_access = 0;
ops->access(c2dev, 0);
dev_info(c2dev->dev, "C2 port %s added\n", name);
dev_info(c2dev->dev, "%s flash has %d blocks x %d bytes "
"(%d bytes total)\n",
name, ops->blocks_num, ops->block_size,
ops->blocks_num * ops->block_size);
return c2dev;
error_device_create_bin_file:
device_destroy(c2port_class, 0);
error_device_create:
spin_lock_irq(&c2port_idr_lock);
idr_remove(&c2port_idr, id);
spin_unlock_irq(&c2port_idr_lock);
error_idr_get_new:
kfree(c2dev);
return ERR_PTR(ret);
}
EXPORT_SYMBOL(c2port_device_register);
void c2port_device_unregister(struct c2port_device *c2dev)
{
if (!c2dev)
return;
dev_info(c2dev->dev, "C2 port %s removed\n", c2dev->name);
device_remove_bin_file(c2dev->dev, &c2port_bin_attrs);
spin_lock_irq(&c2port_idr_lock);
idr_remove(&c2port_idr, c2dev->id);
spin_unlock_irq(&c2port_idr_lock);
device_destroy(c2port_class, c2dev->id);
kfree(c2dev);
}
EXPORT_SYMBOL(c2port_device_unregister);
/*
* Module stuff
*/
static int __init c2port_init(void)
{
printk(KERN_INFO "Silicon Labs C2 port support v. " DRIVER_VERSION
" - (C) 2007 Rodolfo Giometti\n");
c2port_class = class_create(THIS_MODULE, "c2port");
if (!c2port_class) {
printk(KERN_ERR "c2port: failed to allocate class\n");
return -ENOMEM;
}
c2port_class->dev_attrs = c2port_attrs;
return 0;
}
static void __exit c2port_exit(void)
{
class_destroy(c2port_class);
}
module_init(c2port_init);
module_exit(c2port_exit);
MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
MODULE_DESCRIPTION("Silicon Labs C2 port support v. " DRIVER_VERSION);
MODULE_LICENSE("GPL");