linux/arch/c6x/kernel/vectors.S
Aurelien Jacquiot c1a144d77a C6X: early boot code
Original port to early 2.6 kernel using TI COFF toolchain.
Brought up to date by Mark Salter <msalter@redhat.com>

This patch provides the early boot code for C6X architecture. There is a
16 entry vector table which is used to direct reset and interrupt events. The
vector table entries contain a small amount of code (maximum of 8 opcodes)
which simply branches to the actual event handling code.

The head.S code simply clears BSS, setups up a few control registers, and calls
machine_init followed by start_kernel. The machine_init code in setup.c does
the early flat tree parsing (memory, commandline, etc). At setup_arch time, the
code does the usual memory setup and minimally scans the devicetree for any
needed information.

Signed-off-by: Aurelien Jacquiot <a-jacquiot@ti.com>
Signed-off-by: Mark Salter <msalter@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-10-06 19:47:28 -04:00

82 lines
1.7 KiB
ArmAsm

;
; Port on Texas Instruments TMS320C6x architecture
;
; Copyright (C) 2004, 2006, 2009, 2010, 2011 Texas Instruments Incorporated
; Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com)
;
; This program is free software; you can redistribute it and/or modify
; it under the terms of the GNU General Public License version 2 as
; published by the Free Software Foundation.
;
; This section handles all the interrupt vector routines.
; At RESET the processor sets up the DRAM timing parameters and
; branches to the label _c_int00 which handles initialization for the C code.
;
#define ALIGNMENT 5
.macro IRQVEC name, handler
.align ALIGNMENT
.hidden \name
.global \name
\name:
#ifdef CONFIG_C6X_BIG_KERNEL
STW .D2T1 A0,*B15--[2]
|| MVKL .S1 \handler,A0
MVKH .S1 \handler,A0
B .S2X A0
LDW .D2T1 *++B15[2],A0
NOP 4
NOP
NOP
.endm
#else /* CONFIG_C6X_BIG_KERNEL */
B .S2 \handler
NOP
NOP
NOP
NOP
NOP
NOP
NOP
.endm
#endif /* CONFIG_C6X_BIG_KERNEL */
.sect ".vectors","ax"
.align ALIGNMENT
.global RESET
.hidden RESET
RESET:
#ifdef CONFIG_C6X_BIG_KERNEL
MVKL .S1 _c_int00,A0 ; branch to _c_int00
MVKH .S1 _c_int00,A0
B .S2X A0
#else
B .S2 _c_int00
NOP
NOP
#endif
NOP
NOP
NOP
NOP
NOP
IRQVEC NMI,_nmi_handler ; NMI interrupt
IRQVEC AINT,_bad_interrupt ; reserved
IRQVEC MSGINT,_bad_interrupt ; reserved
IRQVEC INT4,_int4_handler
IRQVEC INT5,_int5_handler
IRQVEC INT6,_int6_handler
IRQVEC INT7,_int7_handler
IRQVEC INT8,_int8_handler
IRQVEC INT9,_int9_handler
IRQVEC INT10,_int10_handler
IRQVEC INT11,_int11_handler
IRQVEC INT12,_int12_handler
IRQVEC INT13,_int13_handler
IRQVEC INT14,_int14_handler
IRQVEC INT15,_int15_handler