..
accel
iio: accel: adxl367: fix I2C FIFO data register
2024-02-25 14:31:14 +00:00
adc
iio: adc: ad4130: only set GPIO_CTRL if pin is unused
2024-02-10 16:52:39 +00:00
addac
IIO: 1st set of new device support, features and cleanup for 6.7
2023-10-20 07:54:15 +02:00
afe
iio: afe: rescale: Accept only offset channels
2023-10-17 20:25:32 +01:00
amplifiers
iio: amplifiers: hmc425a: add support for ADRF5740 Attenuator
2023-11-26 16:36:53 +00:00
buffer
Char/Misc and other Driver changes for 6.8-rc1
2024-01-17 16:47:17 -08:00
cdc
iio: cdc: ad7150: relax return value check for IRQ get
2023-08-01 18:55:55 +01:00
chemical
TTY/Serial changes for 6.8-rc1
2024-01-18 11:37:24 -08:00
common
iio: common: ms_sensors: ms_sensors_i2c: fix humidity conversion time table
2023-11-16 19:35:41 +00:00
dac
iio: dac: driver for MCP4821
2023-12-21 17:04:42 +00:00
dummy
Bitmap patches for 5.19-rc1
2022-06-04 14:04:27 -07:00
filter
drivers: iio: filter: admv8818: add bypass mode
2023-08-08 09:51:06 +01:00
frequency
iio: frequency: admv1014: Switch to device_property_match_property_string()
2023-11-16 19:10:26 +00:00
gyro
iio: gyro: hid-sensor-gyro-3d: Convert to platform remove callback returning void
2023-09-23 15:06:55 +01:00
health
iio: Switch i2c drivers back to use .probe()
2023-05-21 18:54:53 +01:00
humidity
iio: humidity: hdc3020: fix temperature offset
2024-01-27 14:40:07 +00:00
imu
iio: imu: inv_mpu6050: fix frequency setting when chip is off
2024-02-25 11:42:12 +00:00
light
iio: hid-sensor-als: Return 0 for HID_USAGE_SENSOR_TIME_TIMESTAMP
2024-02-04 14:02:16 +00:00
magnetometer
iio: magnetometer: rm3100: add boundary check for the value read from RM3100_REG_TMRC
2024-01-22 18:59:06 +00:00
multiplexer
iio: multiplexer: Switch to use dev_err_probe() helper
2022-11-23 19:43:57 +00:00
orientation
iio: orientation: hid-sensor-rotation: Convert to platform remove callback returning void
2023-09-23 15:06:56 +01:00
position
iio: position: hid-sensor-custom-intel-hinge: Convert to platform remove callback returning void
2023-09-23 15:06:56 +01:00
potentiometer
iio: potentiometer: ad5110: Use i2c_get_match_data()
2023-09-12 10:42:03 +01:00
potentiostat
iio: Switch i2c drivers back to use .probe()
2023-05-21 18:54:53 +01:00
pressure
iio: pressure: dlhl60d: Initialize empty DLH bytes
2024-02-25 12:11:31 +00:00
proximity
iio: proximity: irsd200: Drop unused include
2023-12-04 13:24:42 +00:00
resolver
iio: resolver: ad2s1210: add reset gpio support
2023-11-16 19:10:25 +00:00
temperature
iio: temperature: mlx90635 MLX90635 IR Temperature sensor
2023-12-11 19:16:34 +00:00
test
iio: test: Mark file local structure arrays static.
2022-08-15 22:30:01 +01:00
trigger
iio: trigger: stm32-timer: Convert to platform remove callback returning void
2023-09-23 15:06:56 +01:00
iio_core.h
iio: Remove unused declarations
2023-09-12 10:42:03 +01:00
iio_core_trigger.h
industrialio-buffer.c
iio: buffer: Use IIO_SEPARATE instead of a hard-coded 0
2023-12-21 10:48:29 +00:00
industrialio-configfs.c
industrialio-core.c
iio: core: fix memleak in iio_device_register_sysfs
2024-01-22 18:59:06 +00:00
industrialio-event.c
iio: event: add optional event label support
2023-10-11 15:54:41 +01:00
industrialio-gts-helper.c
iio: gts-helpers: fix integration time units
2023-05-13 17:54:57 +01:00
industrialio-sw-device.c
iio: Don't use bare "unsigned"
2022-07-01 11:19:08 +01:00
industrialio-sw-trigger.c
iio: core: Fix entry not deleted when iio_register_sw_trigger_type() fails
2022-11-12 17:53:35 +00:00
industrialio-trigger.c
iio: Make return value check for set_trigger_state() consistent
2023-07-20 19:21:30 +01:00
industrialio-triggered-event.c
inkern.c
iio: inkern: Add a helper to query an available minimum raw value
2023-07-09 22:48:17 +01:00
Kconfig
iio: light: Add gain-time-scale helpers
2023-04-10 12:26:34 +01:00
Makefile
iio: light: Add gain-time-scale helpers
2023-04-10 12:26:34 +01:00
TODO
iio: core: move 'mlock' to 'struct iio_dev_opaque'
2022-11-23 19:44:00 +00:00
11dadb6310