linux/drivers/net/irda/bfin_sir.c
Graf Yang eda6e6f86b net/irda: bfin_sir: IRDA is not affected by anomaly 05000230
Anomaly 05000230 (over sampling of the UART STOP bit) applies only when
the peripheral is operating in UART mode.  So drop the anomaly handling
in the IRDA code.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-23 23:57:45 -07:00

829 lines
19 KiB
C

/*
* Blackfin Infra-red Driver
*
* Copyright 2006-2009 Analog Devices Inc.
*
* Enter bugs at http://blackfin.uclinux.org/
*
* Licensed under the GPL-2 or later.
*
*/
#include "bfin_sir.h"
#ifdef CONFIG_SIR_BFIN_DMA
#define DMA_SIR_RX_XCNT 10
#define DMA_SIR_RX_YCNT (PAGE_SIZE / DMA_SIR_RX_XCNT)
#define DMA_SIR_RX_FLUSH_JIFS (HZ * 4 / 250)
#endif
#if ANOMALY_05000447
static int max_rate = 57600;
#else
static int max_rate = 115200;
#endif
static void turnaround_delay(unsigned long last_jif, int mtt)
{
long ticks;
mtt = mtt < 10000 ? 10000 : mtt;
ticks = 1 + mtt / (USEC_PER_SEC / HZ);
schedule_timeout_uninterruptible(ticks);
}
static void __devinit bfin_sir_init_ports(struct bfin_sir_port *sp, struct platform_device *pdev)
{
int i;
struct resource *res;
for (i = 0; i < pdev->num_resources; i++) {
res = &pdev->resource[i];
switch (res->flags) {
case IORESOURCE_MEM:
sp->membase = (void __iomem *)res->start;
break;
case IORESOURCE_IRQ:
sp->irq = res->start;
break;
case IORESOURCE_DMA:
sp->rx_dma_channel = res->start;
sp->tx_dma_channel = res->end;
break;
default:
break;
}
}
sp->clk = get_sclk();
#ifdef CONFIG_SIR_BFIN_DMA
sp->tx_done = 1;
init_timer(&(sp->rx_dma_timer));
#endif
}
static void bfin_sir_stop_tx(struct bfin_sir_port *port)
{
#ifdef CONFIG_SIR_BFIN_DMA
disable_dma(port->tx_dma_channel);
#endif
while (!(SIR_UART_GET_LSR(port) & THRE)) {
cpu_relax();
continue;
}
SIR_UART_STOP_TX(port);
}
static void bfin_sir_enable_tx(struct bfin_sir_port *port)
{
SIR_UART_ENABLE_TX(port);
}
static void bfin_sir_stop_rx(struct bfin_sir_port *port)
{
SIR_UART_STOP_RX(port);
}
static void bfin_sir_enable_rx(struct bfin_sir_port *port)
{
SIR_UART_ENABLE_RX(port);
}
static int bfin_sir_set_speed(struct bfin_sir_port *port, int speed)
{
int ret = -EINVAL;
unsigned int quot;
unsigned short val, lsr, lcr;
static int utime;
int count = 10;
lcr = WLS(8);
switch (speed) {
case 9600:
case 19200:
case 38400:
case 57600:
case 115200:
/*
* IRDA is not affected by anomaly 05000230, so there is no
* need to tweak the divisor like he UART driver (which will
* slightly speed up the baud rate on us).
*/
quot = (port->clk + (8 * speed)) / (16 * speed);
do {
udelay(utime);
lsr = SIR_UART_GET_LSR(port);
} while (!(lsr & TEMT) && count--);
/* The useconds for 1 bits to transmit */
utime = 1000000 / speed + 1;
/* Clear UCEN bit to reset the UART state machine
* and control registers
*/
val = SIR_UART_GET_GCTL(port);
val &= ~UCEN;
SIR_UART_PUT_GCTL(port, val);
/* Set DLAB in LCR to Access THR RBR IER */
SIR_UART_SET_DLAB(port);
SSYNC();
SIR_UART_PUT_DLL(port, quot & 0xFF);
SIR_UART_PUT_DLH(port, (quot >> 8) & 0xFF);
SSYNC();
/* Clear DLAB in LCR */
SIR_UART_CLEAR_DLAB(port);
SSYNC();
SIR_UART_PUT_LCR(port, lcr);
val = SIR_UART_GET_GCTL(port);
val |= UCEN;
SIR_UART_PUT_GCTL(port, val);
ret = 0;
break;
default:
printk(KERN_WARNING "bfin_sir: Invalid speed %d\n", speed);
break;
}
val = SIR_UART_GET_GCTL(port);
/* If not add the 'RPOLC', we can't catch the receive interrupt.
* It's related with the HW layout and the IR transiver.
*/
val |= IREN | RPOLC;
SIR_UART_PUT_GCTL(port, val);
return ret;
}
static int bfin_sir_is_receiving(struct net_device *dev)
{
struct bfin_sir_self *self = netdev_priv(dev);
struct bfin_sir_port *port = self->sir_port;
if (!(SIR_UART_GET_IER(port) & ERBFI))
return 0;
return self->rx_buff.state != OUTSIDE_FRAME;
}
#ifdef CONFIG_SIR_BFIN_PIO
static void bfin_sir_tx_chars(struct net_device *dev)
{
unsigned int chr;
struct bfin_sir_self *self = netdev_priv(dev);
struct bfin_sir_port *port = self->sir_port;
if (self->tx_buff.len != 0) {
chr = *(self->tx_buff.data);
SIR_UART_PUT_CHAR(port, chr);
self->tx_buff.data++;
self->tx_buff.len--;
} else {
self->stats.tx_packets++;
self->stats.tx_bytes += self->tx_buff.data - self->tx_buff.head;
if (self->newspeed) {
bfin_sir_set_speed(port, self->newspeed);
self->speed = self->newspeed;
self->newspeed = 0;
}
bfin_sir_stop_tx(port);
bfin_sir_enable_rx(port);
/* I'm hungry! */
netif_wake_queue(dev);
}
}
static void bfin_sir_rx_chars(struct net_device *dev)
{
struct bfin_sir_self *self = netdev_priv(dev);
struct bfin_sir_port *port = self->sir_port;
unsigned char ch;
SIR_UART_CLEAR_LSR(port);
ch = SIR_UART_GET_CHAR(port);
async_unwrap_char(dev, &self->stats, &self->rx_buff, ch);
dev->last_rx = jiffies;
}
static irqreturn_t bfin_sir_rx_int(int irq, void *dev_id)
{
struct net_device *dev = dev_id;
struct bfin_sir_self *self = netdev_priv(dev);
struct bfin_sir_port *port = self->sir_port;
spin_lock(&self->lock);
while ((SIR_UART_GET_LSR(port) & DR))
bfin_sir_rx_chars(dev);
spin_unlock(&self->lock);
return IRQ_HANDLED;
}
static irqreturn_t bfin_sir_tx_int(int irq, void *dev_id)
{
struct net_device *dev = dev_id;
struct bfin_sir_self *self = netdev_priv(dev);
struct bfin_sir_port *port = self->sir_port;
spin_lock(&self->lock);
if (SIR_UART_GET_LSR(port) & THRE)
bfin_sir_tx_chars(dev);
spin_unlock(&self->lock);
return IRQ_HANDLED;
}
#endif /* CONFIG_SIR_BFIN_PIO */
#ifdef CONFIG_SIR_BFIN_DMA
static void bfin_sir_dma_tx_chars(struct net_device *dev)
{
struct bfin_sir_self *self = netdev_priv(dev);
struct bfin_sir_port *port = self->sir_port;
if (!port->tx_done)
return;
port->tx_done = 0;
if (self->tx_buff.len == 0) {
self->stats.tx_packets++;
if (self->newspeed) {
bfin_sir_set_speed(port, self->newspeed);
self->speed = self->newspeed;
self->newspeed = 0;
}
bfin_sir_enable_rx(port);
port->tx_done = 1;
netif_wake_queue(dev);
return;
}
blackfin_dcache_flush_range((unsigned long)(self->tx_buff.data),
(unsigned long)(self->tx_buff.data+self->tx_buff.len));
set_dma_config(port->tx_dma_channel,
set_bfin_dma_config(DIR_READ, DMA_FLOW_STOP,
INTR_ON_BUF, DIMENSION_LINEAR, DATA_SIZE_8,
DMA_SYNC_RESTART));
set_dma_start_addr(port->tx_dma_channel,
(unsigned long)(self->tx_buff.data));
set_dma_x_count(port->tx_dma_channel, self->tx_buff.len);
set_dma_x_modify(port->tx_dma_channel, 1);
enable_dma(port->tx_dma_channel);
}
static irqreturn_t bfin_sir_dma_tx_int(int irq, void *dev_id)
{
struct net_device *dev = dev_id;
struct bfin_sir_self *self = netdev_priv(dev);
struct bfin_sir_port *port = self->sir_port;
spin_lock(&self->lock);
if (!(get_dma_curr_irqstat(port->tx_dma_channel) & DMA_RUN)) {
clear_dma_irqstat(port->tx_dma_channel);
bfin_sir_stop_tx(port);
self->stats.tx_packets++;
self->stats.tx_bytes += self->tx_buff.len;
self->tx_buff.len = 0;
if (self->newspeed) {
bfin_sir_set_speed(port, self->newspeed);
self->speed = self->newspeed;
self->newspeed = 0;
}
bfin_sir_enable_rx(port);
/* I'm hungry! */
netif_wake_queue(dev);
port->tx_done = 1;
}
spin_unlock(&self->lock);
return IRQ_HANDLED;
}
static void bfin_sir_dma_rx_chars(struct net_device *dev)
{
struct bfin_sir_self *self = netdev_priv(dev);
struct bfin_sir_port *port = self->sir_port;
int i;
SIR_UART_CLEAR_LSR(port);
for (i = port->rx_dma_buf.head; i < port->rx_dma_buf.tail; i++)
async_unwrap_char(dev, &self->stats, &self->rx_buff, port->rx_dma_buf.buf[i]);
}
void bfin_sir_rx_dma_timeout(struct net_device *dev)
{
struct bfin_sir_self *self = netdev_priv(dev);
struct bfin_sir_port *port = self->sir_port;
int x_pos, pos;
unsigned long flags;
spin_lock_irqsave(&self->lock, flags);
x_pos = DMA_SIR_RX_XCNT - get_dma_curr_xcount(port->rx_dma_channel);
if (x_pos == DMA_SIR_RX_XCNT)
x_pos = 0;
pos = port->rx_dma_nrows * DMA_SIR_RX_XCNT + x_pos;
if (pos > port->rx_dma_buf.tail) {
port->rx_dma_buf.tail = pos;
bfin_sir_dma_rx_chars(dev);
port->rx_dma_buf.head = port->rx_dma_buf.tail;
}
spin_unlock_irqrestore(&self->lock, flags);
}
static irqreturn_t bfin_sir_dma_rx_int(int irq, void *dev_id)
{
struct net_device *dev = dev_id;
struct bfin_sir_self *self = netdev_priv(dev);
struct bfin_sir_port *port = self->sir_port;
unsigned short irqstat;
spin_lock(&self->lock);
port->rx_dma_nrows++;
port->rx_dma_buf.tail = DMA_SIR_RX_XCNT * port->rx_dma_nrows;
bfin_sir_dma_rx_chars(dev);
if (port->rx_dma_nrows >= DMA_SIR_RX_YCNT) {
port->rx_dma_nrows = 0;
port->rx_dma_buf.tail = 0;
}
port->rx_dma_buf.head = port->rx_dma_buf.tail;
irqstat = get_dma_curr_irqstat(port->rx_dma_channel);
clear_dma_irqstat(port->rx_dma_channel);
spin_unlock(&self->lock);
mod_timer(&port->rx_dma_timer, jiffies + DMA_SIR_RX_FLUSH_JIFS);
return IRQ_HANDLED;
}
#endif /* CONFIG_SIR_BFIN_DMA */
static int bfin_sir_startup(struct bfin_sir_port *port, struct net_device *dev)
{
#ifdef CONFIG_SIR_BFIN_DMA
dma_addr_t dma_handle;
#endif /* CONFIG_SIR_BFIN_DMA */
if (request_dma(port->rx_dma_channel, "BFIN_UART_RX") < 0) {
dev_warn(&dev->dev, "Unable to attach SIR RX DMA channel\n");
return -EBUSY;
}
if (request_dma(port->tx_dma_channel, "BFIN_UART_TX") < 0) {
dev_warn(&dev->dev, "Unable to attach SIR TX DMA channel\n");
free_dma(port->rx_dma_channel);
return -EBUSY;
}
#ifdef CONFIG_SIR_BFIN_DMA
set_dma_callback(port->rx_dma_channel, bfin_sir_dma_rx_int, dev);
set_dma_callback(port->tx_dma_channel, bfin_sir_dma_tx_int, dev);
port->rx_dma_buf.buf = (unsigned char *)dma_alloc_coherent(NULL, PAGE_SIZE, &dma_handle, GFP_DMA);
port->rx_dma_buf.head = 0;
port->rx_dma_buf.tail = 0;
port->rx_dma_nrows = 0;
set_dma_config(port->rx_dma_channel,
set_bfin_dma_config(DIR_WRITE, DMA_FLOW_AUTO,
INTR_ON_ROW, DIMENSION_2D,
DATA_SIZE_8, DMA_SYNC_RESTART));
set_dma_x_count(port->rx_dma_channel, DMA_SIR_RX_XCNT);
set_dma_x_modify(port->rx_dma_channel, 1);
set_dma_y_count(port->rx_dma_channel, DMA_SIR_RX_YCNT);
set_dma_y_modify(port->rx_dma_channel, 1);
set_dma_start_addr(port->rx_dma_channel, (unsigned long)port->rx_dma_buf.buf);
enable_dma(port->rx_dma_channel);
port->rx_dma_timer.data = (unsigned long)(dev);
port->rx_dma_timer.function = (void *)bfin_sir_rx_dma_timeout;
#else
if (request_irq(port->irq, bfin_sir_rx_int, IRQF_DISABLED, "BFIN_SIR_RX", dev)) {
dev_warn(&dev->dev, "Unable to attach SIR RX interrupt\n");
return -EBUSY;
}
if (request_irq(port->irq+1, bfin_sir_tx_int, IRQF_DISABLED, "BFIN_SIR_TX", dev)) {
dev_warn(&dev->dev, "Unable to attach SIR TX interrupt\n");
free_irq(port->irq, dev);
return -EBUSY;
}
#endif
return 0;
}
static void bfin_sir_shutdown(struct bfin_sir_port *port, struct net_device *dev)
{
unsigned short val;
bfin_sir_stop_rx(port);
SIR_UART_DISABLE_INTS(port);
val = SIR_UART_GET_GCTL(port);
val &= ~(UCEN | IREN | RPOLC);
SIR_UART_PUT_GCTL(port, val);
#ifdef CONFIG_SIR_BFIN_DMA
disable_dma(port->tx_dma_channel);
disable_dma(port->rx_dma_channel);
del_timer(&(port->rx_dma_timer));
dma_free_coherent(NULL, PAGE_SIZE, port->rx_dma_buf.buf, 0);
#else
free_irq(port->irq+1, dev);
free_irq(port->irq, dev);
#endif
free_dma(port->tx_dma_channel);
free_dma(port->rx_dma_channel);
}
#ifdef CONFIG_PM
static int bfin_sir_suspend(struct platform_device *pdev, pm_message_t state)
{
struct bfin_sir_port *sir_port;
struct net_device *dev;
struct bfin_sir_self *self;
sir_port = platform_get_drvdata(pdev);
if (!sir_port)
return 0;
dev = sir_port->dev;
self = netdev_priv(dev);
if (self->open) {
flush_work(&self->work);
bfin_sir_shutdown(self->sir_port, dev);
netif_device_detach(dev);
}
return 0;
}
static int bfin_sir_resume(struct platform_device *pdev)
{
struct bfin_sir_port *sir_port;
struct net_device *dev;
struct bfin_sir_self *self;
struct bfin_sir_port *port;
sir_port = platform_get_drvdata(pdev);
if (!sir_port)
return 0;
dev = sir_port->dev;
self = netdev_priv(dev);
port = self->sir_port;
if (self->open) {
if (self->newspeed) {
self->speed = self->newspeed;
self->newspeed = 0;
}
bfin_sir_startup(port, dev);
bfin_sir_set_speed(port, 9600);
bfin_sir_enable_rx(port);
netif_device_attach(dev);
}
return 0;
}
#else
#define bfin_sir_suspend NULL
#define bfin_sir_resume NULL
#endif
static void bfin_sir_send_work(struct work_struct *work)
{
struct bfin_sir_self *self = container_of(work, struct bfin_sir_self, work);
struct net_device *dev = self->sir_port->dev;
struct bfin_sir_port *port = self->sir_port;
unsigned short val;
int tx_cnt = 10;
while (bfin_sir_is_receiving(dev) && --tx_cnt)
turnaround_delay(dev->last_rx, self->mtt);
bfin_sir_stop_rx(port);
/* To avoid losting RX interrupt, we reset IR function before
* sending data. We also can set the speed, which will
* reset all the UART.
*/
val = SIR_UART_GET_GCTL(port);
val &= ~(IREN | RPOLC);
SIR_UART_PUT_GCTL(port, val);
SSYNC();
val |= IREN | RPOLC;
SIR_UART_PUT_GCTL(port, val);
SSYNC();
/* bfin_sir_set_speed(port, self->speed); */
#ifdef CONFIG_SIR_BFIN_DMA
bfin_sir_dma_tx_chars(dev);
#endif
bfin_sir_enable_tx(port);
dev->trans_start = jiffies;
}
static int bfin_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct bfin_sir_self *self = netdev_priv(dev);
int speed = irda_get_next_speed(skb);
netif_stop_queue(dev);
self->mtt = irda_get_mtt(skb);
if (speed != self->speed && speed != -1)
self->newspeed = speed;
self->tx_buff.data = self->tx_buff.head;
if (skb->len == 0)
self->tx_buff.len = 0;
else
self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data, self->tx_buff.truesize);
schedule_work(&self->work);
dev_kfree_skb(skb);
return 0;
}
static int bfin_sir_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd)
{
struct if_irda_req *rq = (struct if_irda_req *)ifreq;
struct bfin_sir_self *self = netdev_priv(dev);
struct bfin_sir_port *port = self->sir_port;
int ret = 0;
switch (cmd) {
case SIOCSBANDWIDTH:
if (capable(CAP_NET_ADMIN)) {
if (self->open) {
ret = bfin_sir_set_speed(port, rq->ifr_baudrate);
bfin_sir_enable_rx(port);
} else {
dev_warn(&dev->dev, "SIOCSBANDWIDTH: !netif_running\n");
ret = 0;
}
}
break;
case SIOCSMEDIABUSY:
ret = -EPERM;
if (capable(CAP_NET_ADMIN)) {
irda_device_set_media_busy(dev, TRUE);
ret = 0;
}
break;
case SIOCGRECEIVING:
rq->ifr_receiving = bfin_sir_is_receiving(dev);
break;
default:
ret = -EOPNOTSUPP;
break;
}
return ret;
}
static struct net_device_stats *bfin_sir_stats(struct net_device *dev)
{
struct bfin_sir_self *self = netdev_priv(dev);
return &self->stats;
}
static int bfin_sir_open(struct net_device *dev)
{
struct bfin_sir_self *self = netdev_priv(dev);
struct bfin_sir_port *port = self->sir_port;
int err = -ENOMEM;
self->newspeed = 0;
self->speed = 9600;
spin_lock_init(&self->lock);
err = bfin_sir_startup(port, dev);
if (err)
goto err_startup;
bfin_sir_set_speed(port, 9600);
self->irlap = irlap_open(dev, &self->qos, DRIVER_NAME);
if (!self->irlap)
goto err_irlap;
INIT_WORK(&self->work, bfin_sir_send_work);
/*
* Now enable the interrupt then start the queue
*/
self->open = 1;
bfin_sir_enable_rx(port);
netif_start_queue(dev);
return 0;
err_irlap:
self->open = 0;
bfin_sir_shutdown(port, dev);
err_startup:
return err;
}
static int bfin_sir_stop(struct net_device *dev)
{
struct bfin_sir_self *self = netdev_priv(dev);
flush_work(&self->work);
bfin_sir_shutdown(self->sir_port, dev);
if (self->rxskb) {
dev_kfree_skb(self->rxskb);
self->rxskb = NULL;
}
/* Stop IrLAP */
if (self->irlap) {
irlap_close(self->irlap);
self->irlap = NULL;
}
netif_stop_queue(dev);
self->open = 0;
return 0;
}
static int bfin_sir_init_iobuf(iobuff_t *io, int size)
{
io->head = kmalloc(size, GFP_KERNEL);
if (!io->head)
return -ENOMEM;
io->truesize = size;
io->in_frame = FALSE;
io->state = OUTSIDE_FRAME;
io->data = io->head;
return 0;
}
static const struct net_device_ops bfin_sir_ndo = {
.ndo_open = bfin_sir_open,
.ndo_stop = bfin_sir_stop,
.ndo_start_xmit = bfin_sir_hard_xmit,
.ndo_do_ioctl = bfin_sir_ioctl,
.ndo_get_stats = bfin_sir_stats,
};
static int __devinit bfin_sir_probe(struct platform_device *pdev)
{
struct net_device *dev;
struct bfin_sir_self *self;
unsigned int baudrate_mask;
struct bfin_sir_port *sir_port;
int err;
if (pdev->id >= 0 && pdev->id < ARRAY_SIZE(per) && \
per[pdev->id][3] == pdev->id) {
err = peripheral_request_list(per[pdev->id], DRIVER_NAME);
if (err)
return err;
} else {
dev_err(&pdev->dev, "Invalid pdev id, please check board file\n");
return -ENODEV;
}
err = -ENOMEM;
sir_port = kmalloc(sizeof(*sir_port), GFP_KERNEL);
if (!sir_port)
goto err_mem_0;
bfin_sir_init_ports(sir_port, pdev);
dev = alloc_irdadev(sizeof(*self));
if (!dev)
goto err_mem_1;
self = netdev_priv(dev);
self->dev = &pdev->dev;
self->sir_port = sir_port;
sir_port->dev = dev;
err = bfin_sir_init_iobuf(&self->rx_buff, IRDA_SKB_MAX_MTU);
if (err)
goto err_mem_2;
err = bfin_sir_init_iobuf(&self->tx_buff, IRDA_SIR_MAX_FRAME);
if (err)
goto err_mem_3;
dev->netdev_ops = &bfin_sir_ndo;
dev->irq = sir_port->irq;
irda_init_max_qos_capabilies(&self->qos);
baudrate_mask = IR_9600;
switch (max_rate) {
case 115200:
baudrate_mask |= IR_115200;
case 57600:
baudrate_mask |= IR_57600;
case 38400:
baudrate_mask |= IR_38400;
case 19200:
baudrate_mask |= IR_19200;
case 9600:
break;
default:
dev_warn(&pdev->dev, "Invalid maximum baud rate, using 9600\n");
}
self->qos.baud_rate.bits &= baudrate_mask;
self->qos.min_turn_time.bits = 1; /* 10 ms or more */
irda_qos_bits_to_value(&self->qos);
err = register_netdev(dev);
if (err) {
kfree(self->tx_buff.head);
err_mem_3:
kfree(self->rx_buff.head);
err_mem_2:
free_netdev(dev);
err_mem_1:
kfree(sir_port);
err_mem_0:
peripheral_free_list(per[pdev->id]);
} else
platform_set_drvdata(pdev, sir_port);
return err;
}
static int __devexit bfin_sir_remove(struct platform_device *pdev)
{
struct bfin_sir_port *sir_port;
struct net_device *dev = NULL;
struct bfin_sir_self *self;
sir_port = platform_get_drvdata(pdev);
if (!sir_port)
return 0;
dev = sir_port->dev;
self = netdev_priv(dev);
unregister_netdev(dev);
kfree(self->tx_buff.head);
kfree(self->rx_buff.head);
free_netdev(dev);
kfree(sir_port);
platform_set_drvdata(pdev, NULL);
return 0;
}
static struct platform_driver bfin_ir_driver = {
.probe = bfin_sir_probe,
.remove = __devexit_p(bfin_sir_remove),
.suspend = bfin_sir_suspend,
.resume = bfin_sir_resume,
.driver = {
.name = DRIVER_NAME,
},
};
static int __init bfin_sir_init(void)
{
return platform_driver_register(&bfin_ir_driver);
}
static void __exit bfin_sir_exit(void)
{
platform_driver_unregister(&bfin_ir_driver);
}
module_init(bfin_sir_init);
module_exit(bfin_sir_exit);
module_param(max_rate, int, 0);
MODULE_PARM_DESC(max_rate, "Maximum baud rate (115200, 57600, 38400, 19200, 9600)");
MODULE_AUTHOR("Graf Yang <graf.yang@analog.com>");
MODULE_DESCRIPTION("Blackfin IrDA driver");
MODULE_LICENSE("GPL");