linux/arch/arm/mach-ux500/platsmp.c
Srinidhi Kasagar aa44ef4d43 ARM: 5831/1: ARM: U8500 core machine support
Adds core support for the ST-Ericsson U8500
platform. It supports memory mappings, binds to
the existing modules like GIC, SCU, TWD and
local timers and sets up the infrastructure for
the secondary core.

Reviewed-by: Alessandro Rubini <rubini@unipv.it>
Reviewed-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-28 10:22:52 +00:00

178 lines
4.2 KiB
C

/*
* Copyright (C) 2002 ARM Ltd.
* Copyright (C) 2008 STMicroelctronics.
* Copyright (C) 2009 ST-Ericsson.
* Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
*
* This file is based on arm realview platform
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/smp.h>
#include <linux/io.h>
#include <asm/cacheflush.h>
#include <asm/localtimer.h>
#include <asm/smp_scu.h>
#include <mach/hardware.h>
/*
* control for which core is the next to come out of the secondary
* boot "holding pen"
*/
volatile int __cpuinitdata pen_release = -1;
static unsigned int __init get_core_count(void)
{
return scu_get_core_count(__io_address(U8500_SCU_BASE));
}
static DEFINE_SPINLOCK(boot_lock);
void __cpuinit platform_secondary_init(unsigned int cpu)
{
trace_hardirqs_off();
/*
* if any interrupts are already enabled for the primary
* core (e.g. timer irq), then they will not have been enabled
* for us: do so
*/
gic_cpu_init(0, __io_address(U8500_GIC_CPU_BASE));
/*
* let the primary processor know we're out of the
* pen, then head off into the C entry point
*/
pen_release = -1;
/*
* Synchronise with the boot thread.
*/
spin_lock(&boot_lock);
spin_unlock(&boot_lock);
}
int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned long timeout;
/*
* set synchronisation state between this boot processor
* and the secondary one
*/
spin_lock(&boot_lock);
/*
* The secondary processor is waiting to be released from
* the holding pen - release it, then wait for it to flag
* that it has been released by resetting pen_release.
*/
pen_release = cpu;
flush_cache_all();
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
if (pen_release == -1)
break;
}
/*
* now the secondary core is starting up let it run its
* calibrations, then wait for it to finish
*/
spin_unlock(&boot_lock);
return pen_release != -1 ? -ENOSYS : 0;
}
static void __init wakeup_secondary(void)
{
/* nobody is to be released from the pen yet */
pen_release = -1;
/*
* write the address of secondary startup into the backup ram register
* at offset 0x1FF4, then write the magic number 0xA1FEED01 to the
* backup ram register at offset 0x1FF0, which is what boot rom code
* is waiting for. This would wake up the secondary core from WFE
*/
#define U8500_CPU1_JUMPADDR_OFFSET 0x1FF4
__raw_writel(virt_to_phys(u8500_secondary_startup),
(void __iomem *)IO_ADDRESS(U8500_BACKUPRAM0_BASE) +
U8500_CPU1_JUMPADDR_OFFSET);
#define U8500_CPU1_WAKEMAGIC_OFFSET 0x1FF0
__raw_writel(0xA1FEED01,
(void __iomem *)IO_ADDRESS(U8500_BACKUPRAM0_BASE) +
U8500_CPU1_WAKEMAGIC_OFFSET);
/* make sure write buffer is drained */
mb();
}
/*
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
void __init smp_init_cpus(void)
{
unsigned int i, ncores = get_core_count();
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
}
void __init smp_prepare_cpus(unsigned int max_cpus)
{
unsigned int ncores = get_core_count();
unsigned int cpu = smp_processor_id();
int i;
/* sanity check */
if (ncores == 0) {
printk(KERN_ERR
"U8500: strange CM count of 0? Default to 1\n");
ncores = 1;
}
if (ncores > num_possible_cpus()) {
printk(KERN_WARNING
"U8500: no. of cores (%d) greater than configured "
"maximum of %d - clipping\n",
ncores, num_possible_cpus());
ncores = num_possible_cpus();
}
smp_store_cpu_info(cpu);
/*
* are we trying to boot more cores than exist?
*/
if (max_cpus > ncores)
max_cpus = ncores;
/*
* Initialise the present map, which describes the set of CPUs
* actually populated at the present time.
*/
for (i = 0; i < max_cpus; i++)
set_cpu_present(i, true);
if (max_cpus > 1) {
/*
* Enable the local timer or broadcast device for the
* boot CPU, but only if we have more than one CPU.
*/
percpu_timer_setup();
scu_enable(__io_address(U8500_SCU_BASE));
wakeup_secondary();
}
}